Jean-Yves Dauvignac
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jean-Yves Dauvignac has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Christian Pichot
Electronics, Antennas, and Telecommunications Laboratory, Universit Cte dAzur, Biot, France
8 shared publications - Claire Migliaccio
Universit Cte dAzur, France
7 shared publications Ioannis Aliferis
Université C authorrefmarkote d’Azur, CNRS, LEAT, France
6 shared publicationsLaurent Brochier
Université Côte d’Azur,Sophia AntipolisFrance
5 shared publicationsNicolas Fortino
Univ Cote Azur, LEAT, Campus SophiaTech,930 Route Colles, F-06903 Sophia Antipolis, France
3 shared publicationsAmael Moynot
LEAT, Université Nice Sophia Antipolis, CNRS, Sophia Antipolis, France
2 shared publications
Latest Publications
- Open Access
- 30 May 2025
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 17 (6) , 919
JNM 2024 Special Issue
Held during the 2024 edition of the JNM (French Microwave Days), hosted at the Palais des Congrès, in Antibes-Juan Les Pins, France. This conference was held from the 4th to the 7th of June in 2024. Since it was first held in Limoges in 1976, the Journées Nationales Microondes (JNMs) have become a key event for the French microwave community, providing an opportunity every 2 years (except for the Covid period) to meet and discuss the most relevant research topics in the field. This event brings together French academic and industrial players working in the field of microwaves, from materials, components, circuits, and antennas to communication and detection systems, as well as their many areas of applications (security, defense, space, environment, and health). It is also an opportunity for the Ph.D. students to present their work, often for the first time in public, and to meet their future colleagues. Over the years, the JNM has become the second-largest European conference in the field of microwave techniques and technologies, attracting more than 500 participants. For this edition, the scientific committee has selected 255 papers presented in 32 oral sessions and 12 poster sessions. The work presented in this special issue was subject to a selection procedure, with the highest-ranking short papers receiving an invitation for an extended paper. These extended manuscripts have then undergone a regular review process before their final acceptance for this edition. We would like to warmly thank the authors, the reviewers, the editorial board of IJMWT,
- 30 May 2025
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 17 (6) , 919
Open AccessJNM 2024 Special Issue
Held during the 2024 edition of the JNM (French Microwave Days), hosted at the Palais des Congrès, in Antibes-Juan Les Pins, France. This conference was held from the 4th to the 7th of June in 2024. Since it was first held in Limoges in 1976, the Journées Nationales Microondes (JNMs) have become a key event for the French microwave community, providing an opportunity every 2 years (except for the Covid period) to meet and discuss the most relevant research topics in the field. This event brings together French academic and industrial players working in the field of microwaves, from materials, components, circuits, and antennas to communication and detection systems, as well as their many areas of applications (security, defense, space, environment, and health). It is also an opportunity for the Ph.D. students to present their work, often for the first time in public, and to meet their future colleagues. Over the years, the JNM has become the second-largest European conference in the field of microwave techniques and technologies, attracting more than 500 participants. For this edition, the scientific committee has selected 255 papers presented in 32 oral sessions and 12 poster sessions. The work presented in this special issue was subject to a selection procedure, with the highest-ranking short papers receiving an invitation for an extended paper. These extended manuscripts have then undergone a regular review process before their final acceptance for this edition. We would like to warmly thank the authors, the reviewers, the editorial board of IJMWT,
- Open Access
GWO-Based Joint Optimization of Millimeter-Wave System and Multilayer Perceptron for Archaeological Application
Recently, low THz radar-based measurement and classification for archaeology emerged as a new imaging modality. In this paper, we investigate the classification of pottery shards, a key enabler to understand how the agriculture was introduced from the Fertile Crescent to Europe. Our purpose is to jointly design the measuring radar system and the classification neural network, seeking the maximal compactness and the minimal cost, both directly related to the number of sensors. We aim to select the least possible number of sensors and place them adequately, while minimizing the false recognition rate. For this, we propose a novel version of the Binary Grey Wolf Optimizer, designed to reduce the number of sensors, and a Ternary Grey Wolf Optimizer. Together with the Continuous Grey Wolf Optimizer, they yield the CBTGWO (Continuous Binary Ternary Grey Wolf Optimizer). Working with 7 frequencies and starting with 37 sensors, the CBTGWO selects a single sensor and yields a 0-valued false recognition rate. In a single-frequency scenario, starting with 217 sensors, the CBTGWO selects 2 sensors. The false recognition rate is 2%. The acquisition time is 3.2 s, outperforming the GWO and adaptive mixed GWO, which yield 86.4 and 396.6 s.
Open AccessGWO-Based Joint Optimization of Millimeter-Wave System and Multilayer Perceptron for Archaeological Application
Recently, low THz radar-based measurement and classification for archaeology emerged as a new imaging modality. In this paper, we investigate the classification of pottery shards, a key enabler to understand how the agriculture was introduced from the Fertile Crescent to Europe. Our purpose is to jointly design the measuring radar system and the classification neural network, seeking the maximal compactness and the minimal cost, both directly related to the number of sensors. We aim to select the least possible number of sensors and place them adequately, while minimizing the false recognition rate. For this, we propose a novel version of the Binary Grey Wolf Optimizer, designed to reduce the number of sensors, and a Ternary Grey Wolf Optimizer. Together with the Continuous Grey Wolf Optimizer, they yield the CBTGWO (Continuous Binary Ternary Grey Wolf Optimizer). Working with 7 frequencies and starting with 37 sensors, the CBTGWO selects a single sensor and yields a 0-valued false recognition rate. In a single-frequency scenario, starting with 217 sensors, the CBTGWO selects 2 sensors. The false recognition rate is 2%. The acquisition time is 3.2 s, outperforming the GWO and adaptive mixed GWO, which yield 86.4 and 396.6 s.
- Open Access
- 13 March 2024
- Published by IOP Publishing in Inverse Problems
- Vol. 40 (4) , 045027
Shape and orientation classification of objects based on their electromagnetic signatures using convolutional neural networks
This study addresses the classification of objects using their electromagnetic signatures with convolutional neural networks (CNNs) trained on noiseless data. The singularity expansion method (SEM) was applied to establish a compact model that accurately represents the ultra-wideband scattered field (SF) of an object, independently of its orientation and observation angle. To perform the classification, we used a CNN associated with a noise-robust SEM technique to classify different objects based on their characteristic parameters. To validate this approach, we compared the performance of the classifier with and without SEM pre-processing of the SF for different noise levels and for object sizes not present in the training set. Moreover, we propose a procedure that determines the direction of the receiving antenna and orientation of an object based on the residues associated with each complex natural resonance. This classification procedure using pre-processed SEM data is promising and easy to train, especially when generalizing to object sizes not included in the training set.
- 13 March 2024
- Published by IOP Publishing in Inverse Problems
- Vol. 40 (4) , 045027
Open AccessShape and orientation classification of objects based on their electromagnetic signatures using convolutional neural networks
This study addresses the classification of objects using their electromagnetic signatures with convolutional neural networks (CNNs) trained on noiseless data. The singularity expansion method (SEM) was applied to establish a compact model that accurately represents the ultra-wideband scattered field (SF) of an object, independently of its orientation and observation angle. To perform the classification, we used a CNN associated with a noise-robust SEM technique to classify different objects based on their characteristic parameters. To validate this approach, we compared the performance of the classifier with and without SEM pre-processing of the SF for different noise levels and for object sizes not present in the training set. Moreover, we propose a procedure that determines the direction of the receiving antenna and orientation of an object based on the residues associated with each complex natural resonance. This classification procedure using pre-processed SEM data is promising and easy to train, especially when generalizing to object sizes not included in the training set.
- Open Access
- 8 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Shape and orientation classification of objects based on their electromagnetic signatures using convolutional neural networks
This study addresses the classification of objects using their electromagnetic signatures with Convolutional Neural Networks (CNNs) trained on noiseless data. The singularity expansion method (SEM) was applied to establish a compact model that accurately represents the ultra-wideband scattered field of an object, independently of its orientation and observation angle. To perform the classification, we used a CNN associated with a noise-robust SEM technique to classify different objects based on their characteristic parameters. To validate this approach, we compared the performance of the classifier with and without SEM pre-processing of the scattered field for different noise levels and for object sizes not present in the training set. Moreover, we propose a procedure that determines the direction of the receiving antenna and orientation of an object based on the residues associated with each complex natural resonance. This classification procedure using pre-processed SEM data is promising, especially when generalizing to object sizes not included in the training set.
- 8 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessShape and orientation classification of objects based on their electromagnetic signatures using convolutional neural networks
This study addresses the classification of objects using their electromagnetic signatures with Convolutional Neural Networks (CNNs) trained on noiseless data. The singularity expansion method (SEM) was applied to establish a compact model that accurately represents the ultra-wideband scattered field of an object, independently of its orientation and observation angle. To perform the classification, we used a CNN associated with a noise-robust SEM technique to classify different objects based on their characteristic parameters. To validate this approach, we compared the performance of the classifier with and without SEM pre-processing of the scattered field for different noise levels and for object sizes not present in the training set. Moreover, we propose a procedure that determines the direction of the receiving antenna and orientation of an object based on the residues associated with each complex natural resonance. This classification procedure using pre-processed SEM data is promising, especially when generalizing to object sizes not included in the training set.
- Open Access
Design and Validation of a Reflectarray Antenna with Optimized Beam for Ground Target Monitoring with a DVB-S-Based Passive Radar
A reflectarray antenna with an optimized sectorial beam is designed for the surveillance channel of a DVB-S-based passive radar (PR). The employment of satellite illuminators requires a high gain antenna to counteract the losses due to the great distance from the transmitter, but without forgetting a beamwidth wide enough to provide angular coverage. A method based on optimizing the position of several contiguous beams is proposed to achieve the required sectorial pattern. Different reflectarray elements are designed to achieve S-curves with smooth slopes and covering all the required phases (the S-curve represents the reflection phase of a single element, as a function of size, rotation and incidence angle). The real phase and modulus of the reflection coefficient of each element are considered in the optimization process to achieve the best real prototype. Geometry has been studied and adapted to employ commercial elements for the feed, feed-arm and the structure that holds the aperture. The designed prototype has been characterized in an anechoic chamber achieving a stable gain greater than 19 dBi in almost the complete DVB-S band, from GHz to 12 GHz with a sectorial beam of . The prototype has also been validated in PR trials in terrestrial scenarios allowing the detection of cars at distances up to 600 m away from the PR, improving the performance achieved with commercial parabolic dish antennas.Open AccessDesign and Validation of a Reflectarray Antenna with Optimized Beam for Ground Target Monitoring with a DVB-S-Based Passive Radar
A reflectarray antenna with an optimized sectorial beam is designed for the surveillance channel of a DVB-S-based passive radar (PR). The employment of satellite illuminators requires a high gain antenna to counteract the losses due to the great distance from the transmitter, but without forgetting a beamwidth wide enough to provide angular coverage. A method based on optimizing the position of several contiguous beams is proposed to achieve the required sectorial pattern. Different reflectarray elements are designed to achieve S-curves with smooth slopes and covering all the required phases (the S-curve represents the reflection phase of a single element, as a function of size, rotation and incidence angle). The real phase and modulus of the reflection coefficient of each element are considered in the optimization process to achieve the best real prototype. Geometry has been studied and adapted to employ commercial elements for the feed, feed-arm and the structure that holds the aperture. The designed prototype has been characterized in an anechoic chamber achieving a stable gain greater than 19 dBi in almost the complete DVB-S band, from GHz to 12 GHz with a sectorial beam of . The prototype has also been validated in PR trials in terrestrial scenarios allowing the detection of cars at distances up to 600 m away from the PR, improving the performance achieved with commercial parabolic dish antennas. - 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 111, 811-812
Dual Frequency Processing of Subsampled Measurements in W-band
Nowadays, mm-waves are targeted for numerous applications, among which security ones. With the increasing threats of attacks all over the world, concealed objects detection has become a major concern. Systems already exist but they need to be improved for the upcoming requirement of imaging a moving crowd. Having a real-time image is one of the serious challenges for system’s completion. Measurement time is an issue that we endeavor to drastically reduce. We image an object with subsampled measurements and the real-time back-propagation algorithm (BPA). The on measurements points compression rate is 95%. BPA intrinsically requires a high number of spatial measurements points to avoid grating lobes in the image, which makes the subsampling impracticable. We make use of a dual frequency processing to overcome this difficulty. The processing was tested on measurements taken at 77 and 94 GHz and results show a good grating lobe suppression. Few years ago, the practical implementation of this dual frequency technique would have been an issue but the increasing developments of systems at mm-Waves makes it easier.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 111, 811-812
Dual Frequency Processing of Subsampled Measurements in W-band
Nowadays, mm-waves are targeted for numerous applications, among which security ones. With the increasing threats of attacks all over the world, concealed objects detection has become a major concern. Systems already exist but they need to be improved for the upcoming requirement of imaging a moving crowd. Having a real-time image is one of the serious challenges for system’s completion. Measurement time is an issue that we endeavor to drastically reduce. We image an object with subsampled measurements and the real-time back-propagation algorithm (BPA). The on measurements points compression rate is 95%. BPA intrinsically requires a high number of spatial measurements points to avoid grating lobes in the image, which makes the subsampling impracticable. We make use of a dual frequency processing to overcome this difficulty. The processing was tested on measurements taken at 77 and 94 GHz and results show a good grating lobe suppression. Few years ago, the practical implementation of this dual frequency technique would have been an issue but the increasing developments of systems at mm-Waves makes it easier.
- 19 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (9) , 6217-6222
90 GHz, 3-D Scattered Field Measurements for Investigation of Foreign Object Debris
- 19 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (9) , 6217-6222
90 GHz, 3-D Scattered Field Measurements for Investigation of Foreign Object Debris
- 24 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 66 (12) , 7224-7236
New $W$ -Band Scattering Measurement System: Proof of Concept and Results for 2-D ObjectsThe paper deals with a detailed study of an original system dedicated to scattering measurements of millimeter waves in the W-band. The system’s main innovations lie in its highprecision swivel arm, semi-anechoic environment, flexibility for positioning the object on the measurement tower, as well as the post-processing developed to correct measurement errors. We use canonical objects, i.e. cylinders, for tests and evaluate measurement errors and system performance by comparisons with the theoretical scattered field, which has an analytical expression. For the sake of generality, we work with both VV and HH-polarizations. We propose a complete workflow that performs noise suppression and positioning error correction, relying on two quantities: 1) the cut-off frequency of a low pass filter and 2) the pre-determination of the position of the device under test (DUT). The originality of our approach is that both quantities are fully-defined by the measurement data without a priori knowledge of the DUT. Since the different steps of the workflow are generic, it can easily be transposed to any scattering measurement system. Finally, once corrected, measurements at 75, 95, and 110 GHz exhibit signal-to-noise ratios (SNR) of close to 15 dB for dielectric cylinders and up to 25 dB for metallic ones. To the best of our knowledge, this is the first time that such values have been exhibited in the W-band.
- 24 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 66 (12) , 7224-7236
New $W$ -Band Scattering Measurement System: Proof of Concept and Results for 2-D ObjectsThe paper deals with a detailed study of an original system dedicated to scattering measurements of millimeter waves in the W-band. The system’s main innovations lie in its highprecision swivel arm, semi-anechoic environment, flexibility for positioning the object on the measurement tower, as well as the post-processing developed to correct measurement errors. We use canonical objects, i.e. cylinders, for tests and evaluate measurement errors and system performance by comparisons with the theoretical scattered field, which has an analytical expression. For the sake of generality, we work with both VV and HH-polarizations. We propose a complete workflow that performs noise suppression and positioning error correction, relying on two quantities: 1) the cut-off frequency of a low pass filter and 2) the pre-determination of the position of the device under test (DUT). The originality of our approach is that both quantities are fully-defined by the measurement data without a priori knowledge of the DUT. Since the different steps of the workflow are generic, it can easily be transposed to any scattering measurement system. Finally, once corrected, measurements at 75, 95, and 110 GHz exhibit signal-to-noise ratios (SNR) of close to 15 dB for dielectric cylinders and up to 25 dB for metallic ones. To the best of our knowledge, this is the first time that such values have been exhibited in the W-band.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Compact modeling of UWB antenna radiation pattern in TTW context
This paper describes a linear combination of Spherical Vector Wave Expansion (SVWE) and Singularity expansion methods (SEM) to compress the radiation pattern of ultrawideband antennas and its application to Through-The-Wall (TTW) measurements. This process is applied and compared between simulated and experimental data in free space and in TTW context. This work, based on 3D near-field measurements, can provide a compact and precise model of UWB antenna radiation pattern that can be useful for microwave imaging algorithms.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Compact modeling of UWB antenna radiation pattern in TTW context
This paper describes a linear combination of Spherical Vector Wave Expansion (SVWE) and Singularity expansion methods (SEM) to compress the radiation pattern of ultrawideband antennas and its application to Through-The-Wall (TTW) measurements. This process is applied and compared between simulated and experimental data in free space and in TTW context. This work, based on 3D near-field measurements, can provide a compact and precise model of UWB antenna radiation pattern that can be useful for microwave imaging algorithms.
- 27 March 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 61 (7) , 3927-3931
Amplitude and Phase Measurements of Scattered Fields for Quantitative Imaging in the W-band
This communication investigates a bi-static scattering measurement system for mm-Wave imaging purposes in the W-band (75-110 GHz). The main benefit of using millimeter waves is the high resolution provided by short wavelengths (2.7 to 4 mm). The specific interest in the W-band stems from the increasing number of applications. The system provides multi-frequency, multi-view (multiple receiver positions) data at a single incidence, as the emitter is fixed. In the context of future imaging applications, we seek high accuracy in the measurements. For this, we compare the experimental results obtained from two PEC cylinders with the analytic solution. Raw measurement data have been calibrated during postprocessing in order to account for misalignment errors and noise of the measurement system. Therefore the large cylinder is used as the reference target for deriving the calibration coefficients and the small cylinder is used as a test object. Averaged values of the signal-to-noise ratio over the W-band are 15.5 dB and 10 dB for the large and the small cylinder, respectively. Measurement results are used for the first time in W-band for quantitative imaging.
- 27 March 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 61 (7) , 3927-3931
Amplitude and Phase Measurements of Scattered Fields for Quantitative Imaging in the W-band
This communication investigates a bi-static scattering measurement system for mm-Wave imaging purposes in the W-band (75-110 GHz). The main benefit of using millimeter waves is the high resolution provided by short wavelengths (2.7 to 4 mm). The specific interest in the W-band stems from the increasing number of applications. The system provides multi-frequency, multi-view (multiple receiver positions) data at a single incidence, as the emitter is fixed. In the context of future imaging applications, we seek high accuracy in the measurements. For this, we compare the experimental results obtained from two PEC cylinders with the analytic solution. Raw measurement data have been calibrated during postprocessing in order to account for misalignment errors and noise of the measurement system. Therefore the large cylinder is used as the reference target for deriving the calibration coefficients and the small cylinder is used as a test object. Averaged values of the signal-to-noise ratio over the W-band are 15.5 dB and 10 dB for the large and the small cylinder, respectively. Measurement results are used for the first time in W-band for quantitative imaging.