SXShengyou Xu

Shengyou Xu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shengyou Xu has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis and Modeling for the Real-Time Condition Evaluating of MOSFET Power Device Using Adaptive Neuro-Fuzzy Inference System

    by Shengyou Xu, Xin Yang, Minyou Chen, Wei Lai, Yueyue Wang, Li Ran

    Aging has been generally regarded as one of the principal root causes of power device failure, due to it makes the performance of power device degradative, which will directly influence the electrical–thermal performances of the power device. Thus, it is essential to assess the condition to improve the operating reliability of power device. In this paper, a finite-element analysis (FEA) model of MOSFET is built for simulation. Then, the main impact of failure on the overall characteristics of the MOSFET power device will be discussed and analyzed based on the FEA simulation model of MOSFET. In addition, some suitable feature parameters that can indicate the condition of MOSFET are selected and a methodology is proposed for on-line evaluating the real-time condition without intruding the power device by recognizing the aging rate. In this method, MOSFET is deemed as a whole system considering only external feature parameters, and all feature parameters are classified as the inputs, while the aging rate is considered as the output. First, the feature parameters are extracted by especial measurement circuits, a model is built for evaluating the condition of MOSFET using the adaptive neuro-fuzzy inference system, and a reasonable evaluation criterion is established. Then, a case of practical application study for the monitoring method is illustrated based on the evaluation model. Finally, the real-time condition can be monitored, and the condition grade of aging can be evaluated so that the operator can take some measures to maintain the power device by means of this method. The results of a practical application validated the effectiveness of the proposed methodology.


  • Open Access

    Power Loss Prediction for Aging Characteristics and Condition Monitoring for Parallel‐Connected Power Modules Using Nonlinear Autoregressive Neural Network

    by Shengyou Xu, Xin Yang, Li Ran, Minyou Chen, Wei Lai

    Power modules connected in parallel may have different electrothermal performance variances resulting from aging because of the nonuniform rate of degradation; different electrothermal performance variances mean different current sharing, different junction temperature, and power losses, which will directly influence the overall characteristics of them. Thus, it is essential to monitor the condition and evaluate the degradation grade to improve the reliability of large‐scale power modules. In this paper, the impact of thermal resistance difference on current sharing, junction temperature, and power loss of parallel‐connected power modules has been discussed and analyzed. Additionally, a methodology is proposed for condition monitoring and evaluation of the power modules without intruding them by recognizing the increase in external power loss due to internal degradation from aging. In this method, power modules are deemed as a whole system considering only external factors associated with them, all important electrical and thermal parameters are classified as the inputs, and power loss is considered as the output. Firstly, power dissipation is predicted by models using NARX (nonlinear autoregressive with exogenous input) neural network. Then, a monitoring method is illustrated based on the prediction model; a reasonable criterion for the error between the normal and the predicted real‐time power loss is established. Finally, the real‐time condition and the degradation grade of aging can be evaluated so that the operator can take suitable operating measures by means of this approach. Experimental results validated the effectiveness of the proposed methodology.


  • Open Access

    Condition Monitoring in a Power Module Using On-State Resistance and Case Temperature

    by Wei Lai, Yuanpei Zhao, Minyou Chen, Yueyue Wang, Xueni Ding, Shengyou Xu, Liangming Pan

    Power electronics are widely used in energy conversion systems due to their high efficiency. Finding and replacing the defective power electronic modules timely by monitoring the ageing state of devices can greatly improve the security of power converters and reduce the loss caused by the device failure. Packaging-related fatigue has been identified as one of the main causes of the failures of power electronic modules. This paper proposes a method to monitor the fatigue inside a module by identifying the increase of internal on-state resistance under a certain operation conditions due to the device packagingrelated fatigue. Multiple physical field model results show that the junction temperature increases with the thermal resistance, which causes an increase in the on-state resistance. Therefore, the healthy state of power modules can be diagnosed by comparing the difference of the on-state resistance before and after ageing in the same case temperature, which can be measured directly. Experiments and simulations are conducted to demonstrate the concept and verify the method.


  • Improvement of Tubular Linear Oscillating Actuators by Using End Ferromagnetic Pole Pieces

    by Jun Sun, Ciyong Luo, Shengyou Xu

    In this paper, an improved tubular Halbach surface-mounted permanent magnet (HSPM) linear oscillating actuators (LOAs) with end ferromagnetic pole pieces is proposed. Generally, the end magnet rings are exposed to air due to the inherent opening structure of LOA, resulting in a rather larger reluctance of end air gap and a lower air-gap flux density. Therefore, the analysis on the end air gap is of great significance for LOA performance. Considering this fact, the ferromagnetic pole pieces are added at both ends of the support tube of LOA, trying to direct the magnetic fields in desired paths and enhance the electromagnetic performance of LOA. Two HSPM LOAs with ferromagnetic and without ferromagnetic pole pieces are simulated, built and tested. The results show that the electromagnetic performance of the proposed design is superior to the original. Moreover, its cost and volume are approximately unchanged. The proposed design plays a significant role in enhancing LOA performance and efficiency.


  • Study on lifetime prediction considering fatigue accumulative effect for die‐attach solder layer in an IGBT module

    by Wei Lai, Minyou Chen, Li Ran, Shengyou Xu, Liang‐Ming Pan, Olayiwola Alatise, Philip Mawby

    An accurate lifetime model is needed in power electronic systems as a cost‐effective means of improving reliability and performance assessment, which have long been highly desired to reduce the maintenance cost and to make the product more competitive in the market. Die‐attach solder layer fatigue has been identified as one of the root causes of failure of power electronic modules. This paper presents “physics‐of‐failure lifetime model”, which takes fatigue accumulative effect into consideration and can quantify the effect of long‐term small‐temperature cycling to device fatigue life cycle to estimate the lifetime of the power module. First, small ΔTjpower cycling tests were designed to obtain the effects of ΔTjon aged and un‐aged modules. They indicated that the traditional lifetime models were not accurate in predicting the lifetime of power modules. Therefore, a new time‐domain crack propagation model based on the cumulative damage in the die‐attach solder layer is proposed, which includes time‐dependent material properties and temperature profiles. Moreover, power cycling experiments and simulations are conducted to demonstrate the method by comparing the number of cycles to failure. © 2018 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.


  • Enabling high reliability power modules: A multidisciplinary task

    by J. Ortiz Gonzalez, L. Ran, A. Mohamed Motalab Ali Soli, Z. Davletzhanova, O. Alatise, P. Mawby, Borong Hu, Zheng Zeng, Hai Ren, Li Hui, et al.

    Reliability of power electronic systems is a major concern for application engineers in the automotive and power system sectors. Power electronic modules are one of the main sources of failure in wind energy conversion systems. Power electronic converters used in wind turbine electric drivetrains, railway traction, more-electric-aircrafts, marine propulsion and grid connected systems like FACTS/HVDC require reliable power devices and modules. Wide bandgap semiconductors like SiC have demonstrated enlarged electrothermal Safe-Operating- Areas compared with silicon devices. However, the reliability of SiC power modules and packages has been identified as an area of potential weakness. Traditional packaging systems have been developed for Si hence the different thermomechanical properties of SiC cause different stresses in the packaging thereby potentially causing reduced reliability. This paper identifies some of the key areas for the development of reliable power electronic systems using SiC. The focus is on condition monitoring, packaging system innovation and thermo-mechanical stress analysis as a function of the mechanical properties of Si and SiC. Power cycling experiments and finite element models have been used to support the analysis.


  • A Temperature Gradient-Based Potential Defects Identification Method for IGBT Module

    by Bing Gao, Fan Yang, Minyou Chen, Li Ran, Irfan Ullah, Shengyou Xu, Philip Mawby

    The paper presents a temperature gradient-based method for device state evaluation, taking the insulated-gated bipolar transistor (IGBT) modules as an example investigation. First, theoretical basis of this method is presented and the results from example calculation on temperature gradient indicate that the increased thermal resistance and power loss of IGBT modules would increase the temperature gradient. Then, an electrical-thermal-mechanical finite-element method model of IGBT modules, which takes the material temperature-dependent characteristic into account, is utilized to estimate the temperature gradient distribution for both healthy and fatigue conditions. It is found that the temperature gradient varies with power loss. Furthermore, both the experimental and simulation investigation on the temperature gradient for different conditions were conducted, and it is concluded that the temperature gradient can not only track the change of power loss, but also have a better sensitivity compared with temperature distribution. In addition, the temperature gradient can reflect the defects location and distinguish failures degree. In the end, the influence on the temperature gradient distribution caused by solder fatigue, void, and delamination is discussed.


  • Study on the effects of small swing of junction temperature cycles on solder layer in an IGBT module

    by Yigao Chen, Minyou Chen, Wei Lai, Li Ran, Shengyou Xu, Nan Jiang, Olayiwola Alatise, Phil Mawby

    This paper proposes a method to obtain the effect of junction temperature swing with low amplitudes on the power modules, so that the knowledge about the reliability characteristics of the modules and the lifetime model could be improved. Power cycling tests and finite-element analysis (FEA) models, for non-aged and aged IGBT modules, are designed to illustrate the failure mechanisms of the power modules and the stress distribution. IGBT modules in actual converters such as those in wind turbine systems are usually operated in a junction temperature swing range up to 40°C, therefore small swing junction temperature tests are designed to obtain the effects of small swings of junction temperature on the lifetime of IGBT modules. It is found that such relatively minor stress cycles, which happen frequently during normal operation, may not be able to directly initiate a crack but can contribute to the development of damage in die attach solder layer due to the stress concentration. The experimental results show that the effects of small swing of junction temperature are affected by the ageing state, stress level and load sequence.


  • Lifetime evaluation of solder layer in an IGBT module under different temperature levels

    by Nan Jiang, Minyou Chen, Shengyou Xu, Wei Lai, Gao Bin, Yigao Chen

    Solder layers are highly important parts of the IGBT module which establish the internal electrical connections, mechanical support and cooling channel of module. The function of the IGBT module is deeply dependent on the reliability of solder layers. A Finite Element (FE) model based on actual Insulated Gate Bipolar Transistor (IGBT) module is established to analyze how temperature levels of power cycling load influence the fatigue life of solder layer. 42 power cycling loads were designed with different temperature profiles, simulation results found that with the increase of junction temperature variation, the life parameter which has a negative correlation with solder life grows at an exponential rate. As the same time, with the increase of minimum junction temperature, the life parameter will have a near linear growth. Accordingly, life of solder layer get shorter when junction temperature variation and minimum junction temperature become higher. Finally, a life evaluation function of the solder layer has been established which made temperature profiles as the input variables and life parameter as the output variable.