Ruoyu Su
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ruoyu Su has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Hao Cheng
Nanjing University of Posts and Telecommunications
6 shared publications - Zijun Gong
HKUST (Guangzhou)
6 shared publications - Cheng Li
Simon Fraser University
5 shared publications - Dengyin Zhang
School of Internet of Things, Nanjing University of Posts and Telecommunications, Nanjing, China
3 shared publications - Min Zhang
School of Internet of Things, Nanjing University of Posts and Telecommunications, Nanjing 210003, China
3 shared publications Fei Ding
Nanjing University of Posts and Telecommunications
2 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (11) , 26179-26192
Information-Driven Performance Analysis of Autonomous Underwater Vehicle Navigation Aided by Diverse Measurements
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (11) , 26179-26192
Information-Driven Performance Analysis of Autonomous Underwater Vehicle Navigation Aided by Diverse Measurements
- Open Access
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Software
- Vol. PP (07407459) , 1-9
Making Sense of AI Agents Hype: Adoption, Architectures, and Takeaways from Practitioners
To support practitioners in understanding how agentic systems are designed in real-world industrial practice, we present a review of practitioner conference talks on AI agents. We analyzed 138 recorded talks to examine how companies adopt agent-based architectures (Objective 1), identify recurring architectural strategies and patterns (Objective 2), and analyze application domains and technologies used to implement and operate LLM-driven agentic systems (Objective 3).
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Software
- Vol. PP (07407459) , 1-9
Open AccessMaking Sense of AI Agents Hype: Adoption, Architectures, and Takeaways from Practitioners
To support practitioners in understanding how agentic systems are designed in real-world industrial practice, we present a review of practitioner conference talks on AI agents. We analyzed 138 recorded talks to examine how companies adopt agent-based architectures (Objective 1), identify recurring architectural strategies and patterns (Objective 2), and analyze application domains and technologies used to implement and operate LLM-driven agentic systems (Objective 3).
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25, 25727-25742
Correlated Noise-Aware Iterative MPA-CNN Detection for SCMA Systems
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25, 25727-25742
Correlated Noise-Aware Iterative MPA-CNN Detection for SCMA Systems
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25, 21009-21024
Performance Analysis and Parameter Optimization of AFDM in Doubly-Dispersive Channels
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25, 21009-21024
Performance Analysis and Parameter Optimization of AFDM in Doubly-Dispersive Channels
- Open Access
- 11 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (18) , 9970
On Rate Fairness Maximization for the Downlink NOMA with Improper Signaling and Imperfect SIC
Non-orthogonal multiple access (NOMA) is a key enabler for 6G networks due to its efficient spectrum utilization, which is garnering significant attention among the Internet of Things (IoT) community. This paper investigates the benefits of the improper Gaussian signaling (IGS) technique on the max–min fairness of the downlink NOMA system under imperfect successive interference cancellation (SIC), where both of the users have the potential to adopt IGS. We first investigate fairness optimization under perfect SIC. In this case, the max–min optimization is solved by the alternate optimization algorithm, where the impropriety degree and power level are iteratively optimized. The closed-form solution for conventional proper Gaussian signaling is also obtained. Then, a deep Q network-based solution is considered for the rate fairness maximization of the downlink NOMA system under IGS and imperfect SIC. The simulations presented for the IGS-aided NOMA system support the analysis, illustrating that IGS can efficiently improve the fairness achievable rate compared to the conventional proper one.
- 11 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (18) , 9970
Open AccessOn Rate Fairness Maximization for the Downlink NOMA with Improper Signaling and Imperfect SIC
Non-orthogonal multiple access (NOMA) is a key enabler for 6G networks due to its efficient spectrum utilization, which is garnering significant attention among the Internet of Things (IoT) community. This paper investigates the benefits of the improper Gaussian signaling (IGS) technique on the max–min fairness of the downlink NOMA system under imperfect successive interference cancellation (SIC), where both of the users have the potential to adopt IGS. We first investigate fairness optimization under perfect SIC. In this case, the max–min optimization is solved by the alternate optimization algorithm, where the impropriety degree and power level are iteratively optimized. The closed-form solution for conventional proper Gaussian signaling is also obtained. Then, a deep Q network-based solution is considered for the rate fairness maximization of the downlink NOMA system under IGS and imperfect SIC. The simulations presented for the IGS-aided NOMA system support the analysis, illustrating that IGS can efficiently improve the fairness achievable rate compared to the conventional proper one.
- Open Access
Joint Iterative Decoding Design of Cooperative Downlink SCMA Systems
Sparse code multiple access (SCMA) has been a competitive multiple access candidate for future communication networks due to its superiority in spectrum efficiency and providing massive connectivity. However, cell edge users may suffer from great performance degradations due to signal attenuation. Therefore, a cooperative downlink SCMA system is proposed to improve transmission reliability. To the best of our knowledge, multiuser detection is still an open issue for this cooperative downlink SCMA system. To this end, we propose a joint iterative decoding design of the cooperative downlink SCMA system by using the joint factor graph stemming from direct and relay transmission. The closed form bit-error rate (BER) performance of the cooperative downlink SCMA system is also derived. Simulation results verify that the proposed cooperative downlink SCMA system performs better than the non-cooperative one.
Open AccessJoint Iterative Decoding Design of Cooperative Downlink SCMA Systems
Sparse code multiple access (SCMA) has been a competitive multiple access candidate for future communication networks due to its superiority in spectrum efficiency and providing massive connectivity. However, cell edge users may suffer from great performance degradations due to signal attenuation. Therefore, a cooperative downlink SCMA system is proposed to improve transmission reliability. To the best of our knowledge, multiuser detection is still an open issue for this cooperative downlink SCMA system. To this end, we propose a joint iterative decoding design of the cooperative downlink SCMA system by using the joint factor graph stemming from direct and relay transmission. The closed form bit-error rate (BER) performance of the cooperative downlink SCMA system is also derived. Simulation results verify that the proposed cooperative downlink SCMA system performs better than the non-cooperative one.
- 27 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12 (15) , 31561-31574
Fast Underwater Target Localization With Wideband Signals for the Internet-of-Underwater-Things
Fast underwater localization serves as a critical application of Internet-of-Underwater-Things (IoUT), such as underwater search and rescue. Narrowband sinusoidal pulses are very commonly used in locator beacons installed on flight recorders. A mobile anchor [e.g., autonomous underwater vehicle (AUV)] has to keep receiving the signal and measuring Doppler shift for a long time, so that enough information can be collected for reliable localization. The need of a long-observation window is deeply rooted in the fact that the Doppler shift measurements are highly correlated when they are taken at closely located spots. In this article, we will show that by replacing the narrowband beacon signal with a wideband one, high-accuracy positioning can be achieved within a short period of time. The basic idea is to simultaneously measure Doppler shift and time of arrival (ToA) from wideband signals, and the errors spaces corresponding to these two measurements are complementary even when they are taken at the same position. The Cramér-Rao bound (CRB) will be derived for such a system. In low-signal-to-noise ratio (SNR) regime, the observation window has to be prolonged for effective information extraction, and we will see that the wideband signals still have an edge over the narrowband signals in positioning accuracy. Efficient algorithms are designed for positioning and the closed-form positioning error is derived. We also show that the localization accuracy will experience a significant drop when ToA is replaced by time difference of arrival (TDoA), because the perfect complementation no longer holds. The performance of the proposed algorithm, along with corresponding comparisons, is verified through simulations over various parameters, such as SNR, number of measurements, and length of observation window, etc.
- 27 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12 (15) , 31561-31574
Fast Underwater Target Localization With Wideband Signals for the Internet-of-Underwater-Things
Fast underwater localization serves as a critical application of Internet-of-Underwater-Things (IoUT), such as underwater search and rescue. Narrowband sinusoidal pulses are very commonly used in locator beacons installed on flight recorders. A mobile anchor [e.g., autonomous underwater vehicle (AUV)] has to keep receiving the signal and measuring Doppler shift for a long time, so that enough information can be collected for reliable localization. The need of a long-observation window is deeply rooted in the fact that the Doppler shift measurements are highly correlated when they are taken at closely located spots. In this article, we will show that by replacing the narrowband beacon signal with a wideband one, high-accuracy positioning can be achieved within a short period of time. The basic idea is to simultaneously measure Doppler shift and time of arrival (ToA) from wideband signals, and the errors spaces corresponding to these two measurements are complementary even when they are taken at the same position. The Cramér-Rao bound (CRB) will be derived for such a system. In low-signal-to-noise ratio (SNR) regime, the observation window has to be prolonged for effective information extraction, and we will see that the wideband signals still have an edge over the narrowband signals in positioning accuracy. Efficient algorithms are designed for positioning and the closed-form positioning error is derived. We also show that the localization accuracy will experience a significant drop when ToA is replaced by time difference of arrival (TDoA), because the perfect complementation no longer holds. The performance of the proposed algorithm, along with corresponding comparisons, is verified through simulations over various parameters, such as SNR, number of measurements, and length of observation window, etc.
- Open Access
An Efficient Quantized Message Passing Receiver Design for SCMA Systems
Sparse code multiple access (SCMA) has been considered as an efficient technique to provide both massive connectivity and high spectrum efficiency for future machine-type wireless networks. However, the conventional uniform quantization of the message passing algorithm (MPA) for the SCMA detection induces a significant bit error ratio (BER) performance degradation. In this sense, we propose a new quasi-uniform quantization scheme that can efficiently handle the dynamic range in the exchange of messages. To accelerate the convergence of conventional Max-log MPA, the Sub-log MPA is considered by using the latest updating messages at the current iteration. Simulation results show that the proposed quasi-uniform quantization method can significantly improve the BER performance of the SCMA decoder without modifying the resource nodes’ and variable nodes’ update rules in both the additive white Gaussian noise and the Rayleigh frequency selective channels, as compared to the uniform quantizer.
Open AccessAn Efficient Quantized Message Passing Receiver Design for SCMA Systems
Sparse code multiple access (SCMA) has been considered as an efficient technique to provide both massive connectivity and high spectrum efficiency for future machine-type wireless networks. However, the conventional uniform quantization of the message passing algorithm (MPA) for the SCMA detection induces a significant bit error ratio (BER) performance degradation. In this sense, we propose a new quasi-uniform quantization scheme that can efficiently handle the dynamic range in the exchange of messages. To accelerate the convergence of conventional Max-log MPA, the Sub-log MPA is considered by using the latest updating messages at the current iteration. Simulation results show that the proposed quasi-uniform quantization method can significantly improve the BER performance of the SCMA decoder without modifying the resource nodes’ and variable nodes’ update rules in both the additive white Gaussian noise and the Rayleigh frequency selective channels, as compared to the uniform quantizer.
- 19 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 72 (1053587X) , 1877-1891
High Accuracy AUV-Aided Underwater Localization: Far-Field Information Fusion Perspective
An autonomous underwater vehicle (AUV) can be employed to estimate an underwater target’s position using the Doppler shift measurement extracted from received signals. Conventionally, the received signals have to be divided into several short frames so that the Doppler shift is constant in each one. When the AUV is far away from the target, the signal to noise ratio (SNR) is quite low. An intuitive solution is to increase the frame length to suppress noise and boost SNR. However, it is worth noting that the Doppler shift is actually changing over time, and the prolonged frame length will inevitably induce modeling error. This is a fundamental dilemma in the Doppler-shift-based underwater localization. In this paper, we reveal that the assumption of constant Doppler shift comes from the zero-th order Taylor expansion of the real-time model. To increase the frame length without jeopardizing the model accuracy, we modify the model by taking the first-order Taylor expansion. By doing so, the frame length can be prolonged by one order of magnitude without introducing non-negligible modeling error. What this new model says is that when the target broadcasts a single-tone signal, the AUV will receive a linear frequency modulated (LFM) signal parameterized by a Doppler shift and a corresponding changing rate, i.e., Doppler rate. Although the Doppler rate is very small, it helps us improve the estimation accuracy of Doppler shift. Besides, the Doppler rate also contains target’s position information. Thus, a two-phase localization algorithm is proposed by jointly using the Doppler shift and the Doppler rate measurements. Intuitively, the Doppler rate is only loosely related to the target’s position and should not significantly contribute to the localization accuracy, but the Cramér-Rao lower bound (CRLB) analysis says differently. This can be explained by showing that the Doppler rate complements the vanishing degree of freedom (DoF) in the position information for far-field localization, i.e., the information fusion. The theoretical results are verified through extensive simulations.
- 19 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 72 (1053587X) , 1877-1891
High Accuracy AUV-Aided Underwater Localization: Far-Field Information Fusion Perspective
An autonomous underwater vehicle (AUV) can be employed to estimate an underwater target’s position using the Doppler shift measurement extracted from received signals. Conventionally, the received signals have to be divided into several short frames so that the Doppler shift is constant in each one. When the AUV is far away from the target, the signal to noise ratio (SNR) is quite low. An intuitive solution is to increase the frame length to suppress noise and boost SNR. However, it is worth noting that the Doppler shift is actually changing over time, and the prolonged frame length will inevitably induce modeling error. This is a fundamental dilemma in the Doppler-shift-based underwater localization. In this paper, we reveal that the assumption of constant Doppler shift comes from the zero-th order Taylor expansion of the real-time model. To increase the frame length without jeopardizing the model accuracy, we modify the model by taking the first-order Taylor expansion. By doing so, the frame length can be prolonged by one order of magnitude without introducing non-negligible modeling error. What this new model says is that when the target broadcasts a single-tone signal, the AUV will receive a linear frequency modulated (LFM) signal parameterized by a Doppler shift and a corresponding changing rate, i.e., Doppler rate. Although the Doppler rate is very small, it helps us improve the estimation accuracy of Doppler shift. Besides, the Doppler rate also contains target’s position information. Thus, a two-phase localization algorithm is proposed by jointly using the Doppler shift and the Doppler rate measurements. Intuitively, the Doppler rate is only loosely related to the target’s position and should not significantly contribute to the localization accuracy, but the Cramér-Rao lower bound (CRLB) analysis says differently. This can be explained by showing that the Doppler rate complements the vanishing degree of freedom (DoF) in the position information for far-field localization, i.e., the information fusion. The theoretical results are verified through extensive simulations.
- 20 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 71 (1053587X) , 3867-3882
High-Accuracy Positioning Services for High-Speed Vehicles in Wideband mmWave Communications
It is expected that the sixth-generation (6G) cellular networks will provide high-accuracy positioning services. For the millimeter wave (mmWave) frequency band in 6G, both the Doppler and the spatial wideband effects can lead to channel variation in time and space domains, respectively. However, the impact of these effects on the positioning performance is not well studied. In this paper, we will investigate this issue and show that these two effects are not only challenges, but also provide great opportunities in terms of positioning in vehicular networks. Particularly, we will conduct system modeling, algorithm design, and fundamental performance analysis of simultaneous localization and communications (SLAC) in mmWave-based vehicular networks, exclusively dependent on channel state information. The major challenge in algorithm design is the high computational complexity that comes with the huge antenna arrays and bandwidth. For high-speed vehicle positioning, timeliness is as important as accuracy. For performance evaluation, the Cramér-Rao lower bounds (CRLB) will be derived as benchmarks. We will show that it is possible to achieve CRLB-level positioning accuracy, with almost linear complexity. With the closed-form theoretical results, we will evaluate how different system parameters contribute to positioning accuracy, such as bandwidth, carrier frequency, size and orientation of antenna arrays, etc. These results will shed light on system-level design and optimization of SLAC with ultra-wide frequency band in highly dynamic environments, i.e., very strong spatial wideband and Doppler effects. Comprehensive numerical results will also be presented to verify the theoretical analyses and the effectiveness of the proposed algorithms.
- 20 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 71 (1053587X) , 3867-3882
High-Accuracy Positioning Services for High-Speed Vehicles in Wideband mmWave Communications
It is expected that the sixth-generation (6G) cellular networks will provide high-accuracy positioning services. For the millimeter wave (mmWave) frequency band in 6G, both the Doppler and the spatial wideband effects can lead to channel variation in time and space domains, respectively. However, the impact of these effects on the positioning performance is not well studied. In this paper, we will investigate this issue and show that these two effects are not only challenges, but also provide great opportunities in terms of positioning in vehicular networks. Particularly, we will conduct system modeling, algorithm design, and fundamental performance analysis of simultaneous localization and communications (SLAC) in mmWave-based vehicular networks, exclusively dependent on channel state information. The major challenge in algorithm design is the high computational complexity that comes with the huge antenna arrays and bandwidth. For high-speed vehicle positioning, timeliness is as important as accuracy. For performance evaluation, the Cramér-Rao lower bounds (CRLB) will be derived as benchmarks. We will show that it is possible to achieve CRLB-level positioning accuracy, with almost linear complexity. With the closed-form theoretical results, we will evaluate how different system parameters contribute to positioning accuracy, such as bandwidth, carrier frequency, size and orientation of antenna arrays, etc. These results will shed light on system-level design and optimization of SLAC with ultra-wide frequency band in highly dynamic environments, i.e., very strong spatial wideband and Doppler effects. Comprehensive numerical results will also be presented to verify the theoretical analyses and the effectiveness of the proposed algorithms.