Julien Michelot
Research Subjects
Julien Michelot has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Antoine Salih Alj
ISAE-SUPAERO, Universit de Toulouse, Toulouse, France
5 shared publications Pierre Magnan
ISAE-SUPAERO, Toulouse, France
5 shared publications- Vincent Goiffon
ISAE-SUPAERO, Universit de Toulouse, Toulouse, France
5 shared publications - François Roy
STMicroelectronics, Crolles, France
4 shared publications - Stéphane Demiguel
Thales Alenia Space, Cannes, France
4 shared publications Cédric Virmontois
Centre national d'études spatiale 18 avenue Edouard Belin 31401 Toulouse France
3 shared publications
Latest Publications
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (1) , 330-336
Trapeze Active Deep Trench Designs for Enhanced Charge Transfer Performances in CCD-on-CMOS Image Sensor
A new design of active deep trench CCD-on-CMOS is described and characterized, featuring a two-phase pixel with a built-in electric field that enables highly efficient and fast charge transfer. A charge transfer inefficiency of 10-5 is achieved with just 100 ns transfer time in 12 μm pixels. Improvements in dark current and noise are reported as an effect of dynamic interface pinning, down to 21 pA.cm-2 and 5.3 e-, respectively. The effects of pixel pitch and transfer time on transfer efficiency are discussed.
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (1) , 330-336
Trapeze Active Deep Trench Designs for Enhanced Charge Transfer Performances in CCD-on-CMOS Image Sensor
A new design of active deep trench CCD-on-CMOS is described and characterized, featuring a two-phase pixel with a built-in electric field that enables highly efficient and fast charge transfer. A charge transfer inefficiency of 10-5 is achieved with just 100 ns transfer time in 12 μm pixels. Improvements in dark current and noise are reported as an effect of dynamic interface pinning, down to 21 pA.cm-2 and 5.3 e-, respectively. The effects of pixel pitch and transfer time on transfer efficiency are discussed.
- Open Access
GIGAPYX sensor performance in space environments
We present the results of the GIGAPYX-4600 image sensor in space environment, more specifically under different types of irradiations (protons and heavy ions). The GIGAPYX-4600 is a state-of-the-art 46M pixel multi-purpose, backside illuminated CMOS image sensor. The sensor features high-speed (200 fps), low-noise (< 2e-rms), rolling shutter readout. It has been fabricated using 65 nm node CMOS technology, making use of capacitive deep trench isolation, thus exhibiting good MTF as well as excellent dark current characteristics. The GIGAPYX image sensor family is meant to be easily scalable thanks to a novel use of stitching technology. The assessed sensor features an impressive 46 Mpixels, but the sensor family is meant to be scaled up to 220 M pixels. The idea of this study was to investigate the radiation hardness of a commercially available off-the-shelf (COTS) image sensor that could be suitable for space-borne applications, such as earth observation or satellite vicinity surveillance. In the near future a radiation hard readout electronic for this sensor family will be made available off-the-shelf by Pyxalis. This presentation will overview the different sensor key performances evolutions after proton irradiation up to a total fluence of 2.3e11 p+/cm${}^2$ (62 MeV): dark current, dark current non-uniformity (DCNU), noise, non-linearity, saturation charge and photo-response non-uniformity (PRNU). As expected, degradations mostly occur on the dark current, DCNU and temporal noise. The orders of magnitude of the degradation are in the range of the already published high performance CIS technologies. Results obtained from heavy ions irradiations will demonstrate that the GIGAPYX is not only latch-up free at least up to 57 Mev.cm2/mg, but resistant to the blooming effects induced by a SET at pixel level thanks to its capacitive deep trench isolations. Various SEE effects have been studied, demonstrating encouraging results for such COTS device in order to fly, in particular in GEO orbit. All these radiations results will be used as inputs in designing space camera based on the GIGAPYX sensors, compatible with multiple-mission types.
Open AccessGIGAPYX sensor performance in space environments
We present the results of the GIGAPYX-4600 image sensor in space environment, more specifically under different types of irradiations (protons and heavy ions). The GIGAPYX-4600 is a state-of-the-art 46M pixel multi-purpose, backside illuminated CMOS image sensor. The sensor features high-speed (200 fps), low-noise (< 2e-rms), rolling shutter readout. It has been fabricated using 65 nm node CMOS technology, making use of capacitive deep trench isolation, thus exhibiting good MTF as well as excellent dark current characteristics. The GIGAPYX image sensor family is meant to be easily scalable thanks to a novel use of stitching technology. The assessed sensor features an impressive 46 Mpixels, but the sensor family is meant to be scaled up to 220 M pixels. The idea of this study was to investigate the radiation hardness of a commercially available off-the-shelf (COTS) image sensor that could be suitable for space-borne applications, such as earth observation or satellite vicinity surveillance. In the near future a radiation hard readout electronic for this sensor family will be made available off-the-shelf by Pyxalis. This presentation will overview the different sensor key performances evolutions after proton irradiation up to a total fluence of 2.3e11 p+/cm${}^2$ (62 MeV): dark current, dark current non-uniformity (DCNU), noise, non-linearity, saturation charge and photo-response non-uniformity (PRNU). As expected, degradations mostly occur on the dark current, DCNU and temporal noise. The orders of magnitude of the degradation are in the range of the already published high performance CIS technologies. Results obtained from heavy ions irradiations will demonstrate that the GIGAPYX is not only latch-up free at least up to 57 Mev.cm2/mg, but resistant to the blooming effects induced by a SET at pixel level thanks to its capacitive deep trench isolations. Various SEE effects have been studied, demonstrating encouraging results for such COTS device in order to fly, in particular in GEO orbit. All these radiations results will be used as inputs in designing space camera based on the GIGAPYX sensors, compatible with multiple-mission types.
- 14 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 1217-1227
Displacement Damage Effects on a CDTI-Based CCD-on-CMOS: Dark Current and Charge Transfer Inefficiency
Displacement Damage effects induced by proton and neutron irradiation are explored in a capacitive deep trench CCD-on-CMOS image sensor. Dark current and charge transfer inefficiency are investigated to exhibit respectively the generation and capture-emission mechanisms arising with defect clusters and point defects introduction. This paper reports the trends in damage factor, trap production rate, trap cross-section, and energy distribution with respect to particle fluence and annealing. Charge transfer inefficiency mitigation techniques based on the temperature and clocking of operation are discussed.
- 14 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 1217-1227
Displacement Damage Effects on a CDTI-Based CCD-on-CMOS: Dark Current and Charge Transfer Inefficiency
Displacement Damage effects induced by proton and neutron irradiation are explored in a capacitive deep trench CCD-on-CMOS image sensor. Dark current and charge transfer inefficiency are investigated to exhibit respectively the generation and capture-emission mechanisms arising with defect clusters and point defects introduction. This paper reports the trends in damage factor, trap production rate, trap cross-section, and energy distribution with respect to particle fluence and annealing. Charge transfer inefficiency mitigation techniques based on the temperature and clocking of operation are discussed.
- 16 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (16) , 25652-25661
Dark Current and Clock-Induced Charges in a Fully Depleted Charge Domain CDTI-Based CCD-on-CMOS Image Sensor
The Charge-Coupled Device (CCD) is an essential image sensor for spaceborne scientific applications, high-resolution Earth observation, and low-light imaging due its charge transfer feature yielding intrinsically a high dynamic range. To create a high-performance image sensor that can integrate with CMOS technology, a new design of CCDs using advanced CMOS manufacturing has been developed. In this paper, a charge domain fully depleted CCD-on-CMOS image sensor built with capacitive deep trench isolation is described and characterized. Dark current and clock-induced charges are investigated through their dependence on operational parameters such as biasing, clocking and temperature. The contributions of each charge generation source are separated, identified and quantified to provide an accurate depiction of the device behavior in multi-pinned phase charge transfer mode. In the light of the physical phenomena at play, involving interface state charge generation and impact ionization, an optimization on the device’s clocking is proposed as the best trade-off on clock-induced charges and dark current. Perspectives aiming at further enlarging the applicative field of this image sensor are discussed.
- 16 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (16) , 25652-25661
Dark Current and Clock-Induced Charges in a Fully Depleted Charge Domain CDTI-Based CCD-on-CMOS Image Sensor
The Charge-Coupled Device (CCD) is an essential image sensor for spaceborne scientific applications, high-resolution Earth observation, and low-light imaging due its charge transfer feature yielding intrinsically a high dynamic range. To create a high-performance image sensor that can integrate with CMOS technology, a new design of CCDs using advanced CMOS manufacturing has been developed. In this paper, a charge domain fully depleted CCD-on-CMOS image sensor built with capacitive deep trench isolation is described and characterized. Dark current and clock-induced charges are investigated through their dependence on operational parameters such as biasing, clocking and temperature. The contributions of each charge generation source are separated, identified and quantified to provide an accurate depiction of the device behavior in multi-pinned phase charge transfer mode. In the light of the physical phenomena at play, involving interface state charge generation and impact ionization, an optimization on the device’s clocking is proposed as the best trade-off on clock-induced charges and dark current. Perspectives aiming at further enlarging the applicative field of this image sensor are discussed.
- 25 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1774-1782
Total Ionizing Dose Effects on a CDTI-Based CCD-on-CMOS Through Buildup of Interface Traps and Oxide Charges
Total Ionizing Dose (TID) effects are explored in a fully depleted n-type CCD-on-CMOS based on Capacitive Deep Trench Isolation (CDTI). The root cause of the observed degradation on Full Well Charge (FWC), Charge Transfer Efficiency (CTE) and Dark current is investigated by discriminating the role of interface states and oxide traps. Biasing conditions on irradiation and long-term annealing are explored to provide more elements of comparison with the state of the art of TID effects on modern CMOS devices.
- 25 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1774-1782
Total Ionizing Dose Effects on a CDTI-Based CCD-on-CMOS Through Buildup of Interface Traps and Oxide Charges
Total Ionizing Dose (TID) effects are explored in a fully depleted n-type CCD-on-CMOS based on Capacitive Deep Trench Isolation (CDTI). The root cause of the observed degradation on Full Well Charge (FWC), Charge Transfer Efficiency (CTE) and Dark current is investigated by discriminating the role of interface states and oxide traps. Biasing conditions on irradiation and long-term annealing are explored to provide more elements of comparison with the state of the art of TID effects on modern CMOS devices.
- 6 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 70 (8) , 2018-2026
Capacitive Deep Trench Isolation-Based CCD-on-CMOS Image Sensor Sensitivity to Total Ionizing Dose
This work presents a new type of Charge Coupled Device (CCD) manufactured using a CMOS process and featuring Capacitive Deep Trench Isolation (CDTI). The device is used in a Multi-Pinned Phase mode (MPP) enabling almost constant oxide interface passivation. Flatband shift, Dark current and Charge Transfer Inefficiency (CTI) induced by Total Ionizing Dose (TID) are investigated. Despite the increase of interface states, results show that dark current can be efficiently mitigated by use of short charge transfer duration, avoiding full interface depletion and free charge generation. It is further shown that trapping by interface states is only lightly affecting CTI as the Buried Channel keeps electrons far from interfaces. Finally, a clear correlation on flatband shift with Full Well Charge (FWC) reduction is established.
- 6 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 70 (8) , 2018-2026
Capacitive Deep Trench Isolation-Based CCD-on-CMOS Image Sensor Sensitivity to Total Ionizing Dose
This work presents a new type of Charge Coupled Device (CCD) manufactured using a CMOS process and featuring Capacitive Deep Trench Isolation (CDTI). The device is used in a Multi-Pinned Phase mode (MPP) enabling almost constant oxide interface passivation. Flatband shift, Dark current and Charge Transfer Inefficiency (CTI) induced by Total Ionizing Dose (TID) are investigated. Despite the increase of interface states, results show that dark current can be efficiently mitigated by use of short charge transfer duration, avoiding full interface depletion and free charge generation. It is further shown that trapping by interface states is only lightly affecting CTI as the Buried Channel keeps electrons far from interfaces. Finally, a clear correlation on flatband shift with Full Well Charge (FWC) reduction is established.
- Open Access
- 1 November 2020
- Published by Elsevier in Sensors and Actuators Reports
- Vol. 2 (1)
Miniature particulate matter counter and analyzer based on lens-free imaging of light scattering signatures with a holed image sensor
- 1 November 2020
- Published by Elsevier in Sensors and Actuators Reports
- Vol. 2 (1)
Open AccessMiniature particulate matter counter and analyzer based on lens-free imaging of light scattering signatures with a holed image sensor
- 8 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 65 (12) , 5400-5405
A New Analytical Charge Transfer Model for Time-of-Flight Image Sensors
A powerful tool for analyzing the performances of an image sensor designed for time-of-flight measurement purposes, the impulse response measurement (IRM), is presented. A way to measure the charges diffusion time (time for the to be collected by the photodiode) using the analysis of an IRM is given. An unexpected phenomenon that occurs when performing a specific IRM is then showcased: performing two successive transfers, a short duration one followed by a long duration one is actually less efficient than performing a single transfer of long duration (same duration as the second transfer in the first case). Accordingly, a mathematical sufficient condition on the charge transfer efficiency function (CTEF) is enounced. A physical modeling based on thermionic emission theory and the influence of the potential barrier's width on its effective height is presented. The model leads to a new CTEF expression that fulfills the mathematical requirement. Finally, a numerical simulation with the new CTEF fitting the experimental IRM data is performed.
- 8 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 65 (12) , 5400-5405
A New Analytical Charge Transfer Model for Time-of-Flight Image Sensors
A powerful tool for analyzing the performances of an image sensor designed for time-of-flight measurement purposes, the impulse response measurement (IRM), is presented. A way to measure the charges diffusion time (time for the to be collected by the photodiode) using the analysis of an IRM is given. An unexpected phenomenon that occurs when performing a specific IRM is then showcased: performing two successive transfers, a short duration one followed by a long duration one is actually less efficient than performing a single transfer of long duration (same duration as the second transfer in the first case). Accordingly, a mathematical sufficient condition on the charge transfer efficiency function (CTEF) is enounced. A physical modeling based on thermionic emission theory and the influence of the potential barrier's width on its effective height is presented. The model leads to a new CTEF expression that fulfills the mathematical requirement. Finally, a numerical simulation with the new CTEF fitting the experimental IRM data is performed.