HJHongzhi Jiang

Hongzhi Jiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hongzhi Jiang has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Omnidirectional Vision Sensor for 3-D Measurement of Large-Scale Structures

    by Qi Wang, Hongzhi Jiang, Huijie Zhao, Xudong Li, Wenxuan Peng

    Conventional 3D measurement techniques face challenges when applied to large-scale structures, including limited depth of field, narrow field of view, poor real-time performance, and low efficiency. Omnidirectional vision sensor enables simultaneous multi-directional measurements and offer significant advantages for deployable structures. To achieve clear imaging in both near-field and far-field regions, this paper proposes a composite omnidirectional vision sensor consisting of two sub-sensors. Each sub-sensor utilizes a hexagonal pyramid mirror to reflect images captured by a single camera and reconstructs 3D data based on depth estimation. The mechanical structure and field of view are analyzed. Camera intrinsic parameters are calibrated using a planar circular calibration target, while relative poses between virtual cameras are determined by the geometry of the mirrors. A global coordinate transformation is used to merge data from both sub-sensors. Experimental results demonstrate that the proposed sensor achieves a measurement error of less than 0.7 mm within 50 meters. Dynamic reconstruction experiments on vibrating targets confirm the feasibility and effectiveness of the method.

  • Open Access

    Harmonization of Gaofen-1/WFV Imagery with the HLS Dataset Using Conditional Generative Adversarial Networks

    by Haseeb Ur Rehman, Guanhua Zhou, Franz Pablo Antezana Lopez, Hongzhi Jiang

    The harmonized multi-sensor satellite data assists users by providing seamless analysis-ready data with enhanced temporal resolution. The Harmonized Landsat Sentinel (HLS) product has gained popularity due to the seamless integration of Landsat OLI and Sentinel-2 MSI, achieving a temporal resolution of 2.8 to 3.5 days. However, applications that require monitoring intervals of less than three days or cloudy data can limit the usage of HLS data. Gaofen-1 (GF-1) Wide Field of View (WFV) data provides the capacity further to enhance the data availability by harmonization with HLS. In this study, GF-1/WFV data is harmonized with HLS by employing deep learning-based conditional Generative Adversarial Networks (cGANs). The harmonized WFV data with HLS provides an average temporal resolution of 1.5 days (ranging from 1.2 to 1.7 days), whereas the temporal resolution of HLS varies from 2.8 to 3.5 days. This enhanced temporal resolution will benefit applications that require frequent monitoring. Various processes are employed in HLS to achieve seamless products from the Operational Land Imager (OLI) and Multispectral Imager (MSI). This study applies 6S atmospheric correction to obtain GF-1/WFV surface reflectance data, employs MFC cloud masking, resamples the data to 30 m, and performs geographical correction using AROP relative to HLS data, to align preprocessing with HLS workflows. Harmonization is achieved without using BRDF normalization and bandpass adjustment like in the HLS workflows; instead, cGAN learns cross-sensor reflectance mapping by utilizing a U-Net generator and a patchGAN discriminator. The harmonized GF-1/WFV data were compared to the reference HLS data using various quality indices, including SSIM, MBE, and RMSD, across 126 cloud-free validation tiles covering various land covers and seasons. Band-wise scatter plots, histograms, and visual image color quality were compared. All these indices, including the Sobel filter, histograms, and visual comparisons, indicated that the proposed method has effectively reduced the spectral discrepancies between the GF-1/WFV and HLS data.


  • Open Access

    Geospatial Robust Wheat Yield Prediction Using Machine Learning and Integrated Crop Growth Model and Time-Series Satellite Data

    by Rana Ahmad Faraz Ishaq, Guanhua Zhou, Guifei Jing, Syed Roshaan Ali Shah, Aamir Ali, Muhammad Imran, Hongzhi Jiang, Obaid- Ur- Rehman

    Accurate crop yield modeling (CYM) is inherently challenging due to the complex, nonlinear, and temporally dynamic interactions of biotic and abiotic factors. Crop traits, which historically capture the cumulative effect of these factors, exhibit functional relationships critical for optimizing productivity. This underscores the necessity of multi-trait-based CYM approaches. Crop growth models enable trait dynamics with reflectance data and spectral indices as proxies for crop health and traits, respectively, to have real-time, spatially explicit monitoring. The Agricultural Production Systems sIMulator was calibrated to simulate multiple traits across the growth season based on geo-tagged wheat field ground information. Reflectance and spectral indices were processed for the geo-tagged fields across temporal observations to enable real-time, spatially explicit monitoring. Based on these parameters, this study addresses a critical gap in existing CYM frameworks by proposing a machine learning-based model that synergized multiple crop traits with reflectance and spectral indices to generate site-specific yield estimates. The performance evaluation revealed that the Long Short-Term Memory (LSTM) model achieved superior accuracy for the integrated parameters (RMSE = 250.68 kg/ha, MAE = 193.76 kg/ha, and R2 = 0.84), followed by traits alone. The Random Forest model followed the LSTM model, with an RMSE = 293.56 kg/ha, MAE = 230.68 kg/ha, and R2 = 0.78 for integrated parameters, and an RMSE = 291.73 kg/ha, MAE = 223.17 kg/ha, and R2 = 0.78 for crop traits. The superior prediction demonstrated the dominant role of multiple crop traits with satellite-derived reflectance metrics to develop robust CYM frameworks capable of capturing intra- and inter-field yield variability.


  • Open Access

    A Synergistic Framework for Coupling Crop Growth, Radiative Transfer, and Machine Learning to Estimate Wheat Crop Traits in Pakistan

    by Rana Ahmad Faraz Ishaq, Guanhua Zhou, Aamir Ali, Syed Roshaan Ali Shah, Cheng Jiang, Zhongqi Ma, Kang Sun, Hongzhi Jiang

    The integration of the Crop Growth Model (CGM), Radiative Transfer Model (RTM), and Machine Learning Algorithm (MLA) for estimating crop traits represents a cutting-edge area of research. This integration requires in-depth study to address RTM limitations, particularly of similar spectral responses from multiple input combinations. This study proposes the integration of CGM and RTM for crop trait retrieval and evaluates the performance of CGM output-based RTM spectra generation for multiple crop traits estimation without biased sampling using machine learning models. Moreover, PROSAIL spectra as training against Harmonized Landsat Sentinel-2 (HLS) as testing was also compared with HLS data only as an alternative. It was found that satellite data (HLS, 80:20) not only consistently performed better, but PROSAIL (train) and HLS (test) also had satisfactory results for multiple crop traits from uniform training samples in spite of differences in simulated and real data. PROSAIL-HLS has an RMSE of 0.67 for leaf area index (LAI), 5.66 µg/cm2 for chlorophyll ab (Cab), 0.0003 g/cm2 for dry matter content (Cm), and 0.002 g/cm2 for leaf water content (Cw) against the HLS only, with an RMSE of 0.40 for LAI, 3.28 µg/cm2 for Cab, 0.0002 g/cm2 for Cm, and 0.001 g/cm2 for Cw. Optimized machine learning models, namely Extreme Gradient Boost (XGBoost) for LAI, Support Vector Machine (SVM) for Cab, and Random Forest (RF) for Cm and Cw, were deployed for temporal mapping of traits to be used for wheat productivity enhancement.


  • Open Access

    A Systematic Review of Radiative Transfer Models for Crop Yield Prediction and Crop Traits Retrieval

    by Rana Ahmad Faraz Ishaq, Guanhua Zhou, Chen Tian, Yumin Tan, Guifei Jing, Hongzhi Jiang, Obaid- Ur- Rehman

    Radiative transfer models (RTMs) provide reliable information about crop yield and traits with high resource efficiency. In this study, we have conducted a systematic literature review (SLR) to fill the gaps in the overall insight of RTM-based crop yield prediction (CYP) and crop traits retrieval. Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, 76 articles were found to be relevant to crop traits retrieval and 15 for CYP. China had the highest number of RTM applications (33), followed by the USA (13). Crop-wise, cereals, and traits-wise, leaf area index (LAI) and chlorophyll, had a high number of research studies. Among RTMs, the PROSAIL model had the highest number of articles (62), followed by SCOPE (6) with PROSAIL accuracy for CYP (median R2 = 0.62) and crop traits (median R2 = 0.80). The same was true for crop traits retrieval with LAI (CYP median R2 = 0.62 and traits median R2 = 0.85), followed by chlorophyll (crop traits median R2 = 0.70). Document co-citation analysis also found the relevancy of selected articles within the theme of this SLR. This SLR not only focuses on information about the accuracy and reliability of RTMs but also provides comprehensive insight towards understanding RTM applications for crop yield and traits, further exploring possibilities of new endeavors in agriculture, particularly crop yield modeling.


  • Open Access

    Projective Parallel Single-Pixel Imaging: 3D Structured Light Scanning Under Global Illumination

    by Yuxi Li, Hongzhi Jiang, Huijie Zhao, Xudong Li

    We present projective parallel single-pixel imaging (pPSI), a 3D photography method that provides a robust and efficient way to analyze the light transport behavior and enables separation of light effect due to global illumination, thereby achieving 3D structured light scanning under global illumination. The light transport behavior is described by the light transport coefficients (LTC), which contain complete information for a projector camera pair, and is a 4D data set. However, the capture of LTC is generally time consuming. The 4D LTC in pPSI are reduced to projection functions, thereby enabling a highly efficient data capture process. We introduce the local maximum constraint, which provides constraint for the location of candidate correspondence matching points when projections are captured. Local slice extension (LSE) method is introduced to accelerate the capture of projection functions. Optimization is conducted for pPSI under several situations. The number of projection functions required for pPSI is optimized and the influence of capture ratio in LSE on the accuracy of the correspondence matching points is investigated. Discussions and experiments include two typical kinds of global illuminations: inter-reflections and subsurface scattering. The proposed method is validated with several challenging scenarios, and outperforms the state-of-the-art methods.

  • Open Access

    Compressive parallel single-pixel imaging for efficient 3D shape measurement in the presence of strong interreflections by using a sampling Fourier strategy

    by Yuxi Li, Hongzhi Jiang, Huijie Zhao, Xudong Li, Yunfan Wang, Yang Xu

    We present a compressive parallel single-pixel imaging (cPSI) method, which applies compressive sensing in the context of PSI, to achieve highly efficient light transport coefficients capture and 3D reconstruction in the presence of strong interreflections. A characteristic-based sampling strategy is introduced that has sampling frequencies with high energy and high probability. The characteristic-based sampling strategy is compared with various state-of-the-art sampling strategies, including the square, circular, uniform random, and distance-based sampling strategies. Experimental results demonstrate that the characteristic-based sampling strategy exhibits the best performance, and cPSI can obtain highly accurate 3D shape data in the presence of strong interreflections with high efficiency.