TOThomas A. Ohki

Thomas A. Ohki

*This is an algorithmically generated author record based on publicly available information.

Thomas A. Ohki has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    rf quantum capacitance parametric amplifier

    by A. El Kass, B. Harlech-Jones, C. T. Jin, J. D. Watson, G. C. Gardner, S. Fallahi, M. J. Manfra, T. A. Ohki, D. J. Reilly

    We report an rf parametric amplifier that exploits the gate-tunable quantum capacitance of a semiconductor two-dimensional electron gas at cryogenic temperatures. The prototype amplifier exhibits a gain approximately 30 dB up to an input power of − 66 dBm and a noise temperature T N ∼ 2 K at approximately 370 MHz while dissipating approximately a microwatt of power. Operable at tesla-scale magnetic fields and temperatures ranging from millikelvin to a few kelvin, the quantum capacitance parametric amplifier may find utility in the readout circuit of spin qubits. Here, a quantum dot system is used to verify amplifier performance, improving the signal-to-noise ratio of the readout by approximately 9 dB.

  • Toward the Scalable Fabrication of Thin-Film Superconducting Parametric Amplifiers

    by A. El Kass, K. A. Fuguet Simoes, C. Chua, D. J. Reilly, K. Zuo, T. A. Ohki

    Kinetic inductance travelling-wave parametric amplifiers (KTWPAs) are emerging as core components in many applications where wideband cryogenic radio frequency (RF) amplification at or near the quantum limit of added noise is critical. These thin film superconducting devices are unique in their ability to simultaneously provide large dynamic range and quantum-limited amplification of single photon to 100 000 s of photon signals. Despite the promising performance of co-planar NbTiN thin-film KTWPAs, the original promise of a “simple” single-layer metal fabrication has encountered roadblocks and their broader adoption has been hindered by low fabrication yield. In this work, we present a post-lithography correction technique that eliminates short-circuits, significantly improving yield and enabling reliable wafer-scale production. Using automated image acquisition, error analysis, and correction, we successfully fabricated operational KTWPAs on high-resistivity silicon, achieving $>$10 dB between 2–4 GHz. This approach paves the way for the scaling up manufacturing of KTWPAs, positioning them for widespread deployment in quantum technologies.


  • Open Access

    Hilbert space as a computational resource in reservoir computing

    by W. D. Kalfus, G. J. Ribeill, G. E. Rowlands, H. K. Krovi, T. A. Ohki, L. C. G. Govia

    Accelerating computation with quantum resources is limited by the challenges of high-fidelity control of quantum systems. Reservoir computing presents an attractive alternative, as precise control and full calibration of system dynamics are not required. Instead, complex internal trajectories in a large state space are leveraged as a computational resource. Quantum systems offer a unique venue for reservoir computing, given the presence of interactions unavailable in classical systems and a potentially exponentially-larger computational space. With a reservoir comprised of a single d-dimensional quantum system, we demonstrate clear performance improvement with Hilbert space dimension at two benchmark tasks and advantage over the physically analogous classical reservoir. Quantum reservoirs as realized by current-era quantum hardware offer immediate practical implementation and a promising outlook for increased performance in larger systems.


  • Symmetry-aware reservoir computing

    by Wendson A. S. Barbosa, Aaron Griffith, Graham E. Rowlands, Luke C. G. Govia, Guilhem J. Ribeill, Minh-Hai Nguyen, Thomas A. Ohki, Daniel J. Gauthier

    We demonstrate that matching the symmetry properties of a reservoir computer (RC) to the data being processed dramatically increases its processing power. We apply our method to the parity task, a challenging benchmark problem that highlights inversion and permutation symmetries, and to a chaotic system inference task that presents an inversion symmetry rule. For the parity task, our symmetry-aware RC obtains zero error using an exponentially reduced neural network and training data, greatly speeding up the time to result and outperforming artificial neural networks. When both symmetries are respected, we find that the network size N necessary to obtain zero error for 50 different RC instances scales linearly with the parity-order n. Moreover, some symmetry-aware RC instances perform a zero error classification with only N=1 for n≤7. Furthermore, we show that a symmetry-aware RC only needs a training data set with size on the order of (n+n/2) to obtain such a performance, an exponential reduction in comparison to a regular RC which requires a training data set with size on the order of n2n to contain all 2n possible n-bit-long sequences. For the inference task, we show that a symmetry-aware RC presents a normalized root-mean-square error three orders-of-magnitude smaller than regular RCs. For both tasks, our RC approach respects the symmetries by adjusting only the input and the output layers, and not by problem-based modifications to the neural network. We anticipate that the generalizations of our procedure can be applied in information processing for problems with known symmetries.


  • Josephson junction infrared single-photon detector

    by Evan D. Walsh, Woochan Jung, Gil-Ho Lee, Dmitri K. Efetov, Bae-Ian Wu, K.-F. Huang, Thomas A. Ohki, Takashi Taniguchi, Kenji Watanabe, Philip Kim, et al.

    A junction for single-photon detection: Josephson junctions are simple superconducting devices comprising an insulator or semiconductor separating two superconducting regions. They form the workhorse of superconducting technologies and are exquisitely sensitive to magnetic field. One long-sought proposal has been to use these devices to detect light. Walsh et al. have realized a photosensitive Josephson junction based on graphene that is capable of sensing single infrared photons. Such a photosensitive Josephson junction is expected to operate as a high-speed, low-power consumption optical interconnect for communication between superconducting-based supercomputers and quantum computers. Science , this issue p. 409


  • Open Access

    Quantum reservoir computing with a single nonlinear oscillator

    by L. C. G. Govia, G. J. Ribeill, G. E. Rowlands, H. K. Krovi, T. A. Ohki

    Realizing the promise of quantum information processing remains a daunting task given the omnipresence of noise and error. Adapting noise-resilient classical computing modalities to quantum mechanics may be a viable path towards near-term applications in the noisy intermediate-scale quantum era. Here, we propose continuous variable quantum reservoir computing in a single nonlinear oscillator. Through numerical simulation of our model we demonstrate quantum-classical performance improvement and identify its likely source: the nonlinearity of quantum measurement. Beyond quantum reservoir computing, this result may impact the interpretation of results across quantum machine learning. We study how the performance of our quantum reservoir depends on Hilbert space dimension, how it is impacted by injected noise, and briefly comment on its experimental implementation. Our results show that quantum reservoir computing in a single nonlinear oscillator is an attractive modality for quantum computing on near-term hardware.


  • Graphene-based Josephson junction microwave bolometer

    by Gil-Ho Lee, Dmitri K. Efetov, Woochan Jung, Leonardo Ranzani, Evan D. Walsh, Thomas A. Ohki, Takashi Taniguchi, Kenji Watanabe, Philip Kim, Dirk Englund, et al.

    Sensitive microwave detectors are essential in radioastronomy1, dark-matter axion searches2 and superconducting quantum information science3,4. The conventional strategy to obtain higher-sensitivity bolometry is the nanofabrication of ever smaller devices to augment the thermal response5,6,7. However, it is difficult to obtain efficient photon coupling and to maintain the material properties in a device with a large surface-to-volume ratio owing to surface contamination. Here we present an ultimately thin bolometric sensor based on monolayer graphene. To utilize the minute electronic specific heat and thermal conductivity of graphene, we develop a superconductor–graphene–superconductor Josephson junction8,9,10,11,12,13 bolometer embedded in a microwave resonator with a resonance frequency of 7.9 gigahertz and over 99 per cent coupling efficiency. The dependence of the Josephson switching current on the operating temperature, charge density, input power and frequency shows a noise-equivalent power of 7 × 10−19 watts per square-root hertz, which corresponds to an energy resolution of a single 32-gigahertz photon14, reaching the fundamental limit imposed by intrinsic thermal fluctuations at 0.19 kelvin. Our results establish that two-dimensional materials could enable the development of bolometers with the highest sensitivity allowed by the laws of thermodynamics.


  • Open Access

    Real-time processing of stabilizer measurements in a bit-flip code

    by Diego Ristè, Luke C. G. Govia, Brian Donovan, Spencer D. Fallek, William D. Kalfus, Markus Brink, Nicholas T. Bronn, Thomas A. Ohki

    Although qubit coherence times and gate fidelities are continuously improving, logical encoding is essential to achieve fault tolerance in quantum computing. In most encoding schemes, correcting or tracking errors throughout the computation is necessary to implement a universal gate set without adding significant delays in the processor. Here, we realize a classical control architecture for the fast extraction of errors based on multiple cycles of stabilizer measurements and subsequent correction. We demonstrate its application on a minimal bit-flip code with five transmon qubits, showing that real-time decoding and correction based on multiple stabilizers is superior in both speed and fidelity to repeated correction based on individual cycles. Furthermore, the encoded qubit can be rapidly measured, thus enabling conditional operations that rely on feed forward, such as logical gates. This co-processing of classical and quantum information will be crucial in running a logical circuit at its full speed to outpace error accumulation.


  • Demonstration of a superconducting nanowire microwave switch

    by A. Wagner, L. Ranzani, G. Ribeill, T. A. Ohki

    The functionality of a nanowire integrated into a superconducting transmission line acting as a single pole single throw switch is demonstrated. The switch has an instantaneous bandwidth from 2 to 8 GHz with more than 10 dB of isolation between the open and closed states. The switch consumes no power in the closed state and ≈ 15   nW in the open state. The rise and fall response time between open and closed states is approximately 370   ps .


  • Sub-nanosecond switching in a cryogenic spin-torque spin-valve memory element with a dilute permalloy free layer

    by L. Rehm, V. Sluka, G. E. Rowlands, M.-H. Nguyen, T. A. Ohki, A. D. Kent

    We present a study of pulsed current switching characteristics of spin-valve nanopillars with in-plane magnetized dilute permalloy and undiluted permalloy free layers in the ballistic regime at low temperatures. The dilute permalloy free layer device switches much faster: the characteristic switching time for a permalloy (Ni0.83Fe0.17) free layer device is 1.18 ns, while that for a dilute permalloy ([Ni0.83Fe0.17]0.6Cu0.4) free layer device is 0.475 ns. A ballistic macrospin model can capture the data trends with a reduced spin-torque asymmetry parameter, reduced spin polarization, and increased Gilbert damping for the dilute permalloy free layer relative to the permalloy devices. Our study demonstrates that reducing the magnetization of the free layer increases the switching speed while greatly reducing the switching energy and shows a promising route toward even lower power magnetic memory devices compatible with superconducting electronics.