MRMarco Ranocchiari

Marco Ranocchiari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marco Ranocchiari has a total of 235 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Structure–Performance Relationships in Metal–Organic Framework Mg 2 (olz) Catalysts for CO 2 Adsorption and Hydrogenation to Methanol

    by Anna Liutkova, Fabio André Peixoto Esteves, Anastasia Molokova, Marianela López Romero, Davide Salusso, Andrea Testino, Emiliya Poghosyan, Marco Ranocchiari

    We investigated a Cu–Zn‐modified Mg 2 (olz) catalyst for carbon dioxide (CO 2 ) hydrogenation to methanol under low CO 2 partial pressures, relevant to dilute CO 2 streams in industrial gas treatment and carbon capture. The catalyst was prepared via wet impregnation of presynthesized Cu–Zn species into the metal‐organic framework (MOF). Batch tests under mild temperatures and low CO 2 concentration showed that the MOF‐based system achieved higher methanol yields than a commercial catalyst at 150 °C. Step‐response experiments in a plug‐flow reactor revealed that the MOF retained a significant amount of CO 2 under high‐pressure and dynamic conditions. In situ diffuse reflectance infrared Fourier transform spectroscopy identified methanol‐related surface intermediates, while ex situ postreaction 1 H nuclear magnetic resonance spectroscopy supported the formation and retention of methanol and oxygenated species in the MOF‐based catalyst. X‐ray absorption spectroscopy showed partial reduction of oxygenated Cu species during reaction, while in situ X‐ray diffraction demonstrated structural stability of the Mg 2 (olz) MOF framework. These results indicate that Mg 2 (olz)‐based materials combine CO 2 adsorption capacity with catalytic functionality. Adsorption and catalytic functions coexist rather than being directly coupled. The material exhibits methanol productivity at low temperature in the presence of a solvent phase and remains structurally stable under the investigated catalytic conditions.

  • Open Access

    Stabilization of Cu Species in UiO‐66 Metal–Organic Framework for CO 2 ‐to‐Methanol: Insights From Operando X‐ray and Electron Microscopy Studies

    by Anna Liutkova, Fabio André Peixoto Esteves, Marianela López Romero, Margareth S. Baidun, Anastasia Molokova, Davide Salusso, Kirill A. Lomachenko, Andrea Testino, Alexander A. Kolganov, Evgeny A. Pidko, et al.

    UiO‐66, a Zr‐based metal–organic framework (MOF), provides an ordered porous environment capable of adsorbing/retaining CO 2 and oxygenated intermediates relevant for methanol synthesis. Although UiO‐66‐based composites containing Cu and Cu‐Zn species show promising performance for CO 2 ‐to‐methanol conversion, the role of the MOF framework in stabilizing the active metallic species under working conditions remains insufficiently understood. Here, the stabilization of copper species by UiO‐66 and the influence of Zn promotion on Cu speciation and catalytic performance during CO 2 hydrogenation are investigated. Operando X‐ray absorption spectroscopy at the Cu, Zn, and Zr K‐edges is combined with electron microscopy and density functional theory calculations to follow the evolution of metal species and the framework during reduction, reaction, and transient switching experiments. Zn promotes the formation and stability of highly dispersed Cu under reaction conditions, while the Zr 6 nodes of UiO‐66 respond dynamically through reversible hydroxylation and dehydroxylation. By correlating metal speciation, framework response, and methanol productivity under continuous‐flow conditions, this work provides molecular‐level insight into metal stabilization in Zr‐based MOFs and informs the design of MOF‐based catalysts for CO 2 hydrogenation.


  • Open Access

    Structure-activity relationships for Mg-IRMOF-74-based catalysts integrating CO₂ adsorption and hydrogenation to methanol

    by Anna Liutkova, Fabio André Peixoto Esteves, Anastasia Molokova, Marianela López Romero, Davide Salusso, Andrea Testino, Emiliya Poghosyan, Marco Ranocchiari

    We investigated a Cu-Zn-modified Mg2(olz) catalyst for carbon dioxide (CO₂) hydrogenation to methanol under low CO₂ partial pressures, relevant to flue gas treatment. The catalyst was prepared via wet impregnation of pre-synthesized Cu-Zn nanoparticles into the metal-organic framework (MOF) under moisture-free conditions. Batch tests under mild temperatures and low CO2 concentration showed that the MOF-based system achieved higher methanol yields than a commercial Cu/ZnO/Al₂O₃ catalyst at 150 °C. Step-response experiments in a plug-flow reactor revealed that the MOF retained significant amount of CO₂ under high-pressure and dynamic conditions. Post-reaction 1H Nuclear magnetic resonance spectroscopy demonstrated retention of methanol and oxygenated intermediates in the MOF-based catalyst. X-Ray absorption spectroscopy showed partial reduction of Cu₂O-like species to Cu⁰ during reaction, while in situ X-Ray diffraction demonstrated structural stability of the MOF framework. Transmission electron microscopy revealed sheet-like MOF structures (100–150 nm) with 21 Å interplanar spacing, aligning with the theoretical pore size and indicating high surface area for diffusion and catalysis. These results indicate that Mg2(olz)-based materials can integrate CO₂ adsorption and catalytic functions, showing high methanol productivity at low temperature and maintaining stability under catalytic conditions.

  • Open Access

    Hydrophobic Silica Gels and Aerogels for Direct Air Capture: Hybrid Grafting To Suppress Water Uptake and Capillary Condensation

    by Paweł P. Ziemiański, Mercy Cherotich, Ilia Sadykov, Chaima Mansour, Ivan Lunati, Marco Ranocchiari, Wim J. Malfait, Sandra Galmarini

    Direct air capture of CO2 (DAC) is critical to achieving climate goals, requiring the removal of approximately 220 000 Mt of CO2 by 2100. Amine-functionalized sorbents are promising for CO2 capture but face challenges under high humidity, where water sorption reduces the CO2 selectivity and capillary condensation may degrade the sorbent, especially the delicate silica aerogel backbone, compromising structural integrity. To address this issue, we introduce superhydrophobic silica gels functionalized by hybrid grafting of amine, long-aliphatic, and trimethylsilyl groups. These materials drastically reduce water uptake, from >50 wt % for nonhydrophobized gels to 5 wt % at 95% RH, and maintain high CO2/water selectivity at high relative humidity. This shows how to overcome a limitation of silica sorbents, which have shown poor performance up to now under realistic high-humidity DAC conditions. The hydrophobic functional groups shield the hydrophilic amine sites and prevent capillary condensation, preserving pore hydrophobicity, preventing pore clogging with water, and ensuring rapid CO2 diffusion, essential for sustained performance. We demonstrate that conventional single-component and dry-condition CO2 sorption tests overlook the critical role of moisture, underestimating the detrimental effect of presorbed water on nonhydrophobized silica gels, previously reported in the literature. The ability to apply ambient pressure drying without significant selectivity loss, along with the affordability of the silica matrix, enhances the feasibility of real-world implementation for silica-based DAC sorbents. Given the versatility of amorphous sorbents, this study paves the way for further material optimization tailored to DAC applications.


  • Open Access

    The role of Fe incorporation into Ni-MOF-74 derived oxygen evolution electrocatalysts for anion exchange membrane water electrolysis

    by Julia Linke, Thomas Rohrbach, Adam Hugh Clark, Camelia Borca, Thomas Huthwelker, Fabian Luca Buchauer, Mikkel Rykær Kraglund, Christodoulos Chatzichristodoulou, Eibhlin Meade, Julie Guehl, et al.

    The performance of Ni-based oxygen evolution reaction (OER) electrocatalysts is enhanced upon Fe incorporation into the structure during the synthesis process or electrochemical Fe uptake from the electrolyte. In light of the promising potential of metal–organic framework (MOF) electrocatalysts for water splitting, Ni-MOF-74 is used as a model catalyst to study the effect of Fe incorporation from KOH electrolyte on the electrocatalyst's OER activity and stability. The insights obtained from X-ray diffraction and operando X-ray absorption spectroscopy characterization of Ni-MOF-74 and an amorphous Ni metal organic compound (Ni-MOC*) reveal that Fe uptake enhances OER by two processes: higher Ni oxidation states and enhanced flexibility of both, the electronic state and the local structure, when cycling the potential below and above the OER onset. To demonstrate the impressive OER activity and stability in Fe containing KOH, an Ni-MOC* anode was implemented in an anion exchange membrane water electrolyzer (AEM-WE) with 3 ppm Fe containing 1 M KOH electrolyte resulting in an outstanding cell voltage of 1.7 V (at an anode potential of 1.51 V) at 60 °C and 0.5 A cm−2 exceeding 130 h of stable continuous operation.


  • Open Access

    In Situ Neutron Diffraction of Zn-MOF-74 Reveals Nanoconfinement-Induced Effects on Adsorbed Propene

    by Patrick Gäumann, Davide Ferri, Denis Sheptyakov, Jeroen A. van Bokhoven, Przemyslaw Rzepka, Marco Ranocchiari

    Even though confinement was identified as a common element of selective catalysis and simulations predicted enhanced properties of adsorbates within microporous materials, experimental results on the characterization of the adsorbed phase are still rare. In this study, we provide experimental evidence of the increase of propene density in the channels of Zn-MOF-74 by 16(2)% compared to the liquid phase. The ordered propene molecules adsorbed within the pores of the MOF have been localized by in situ neutron powder diffraction, and the results are supported by adsorption studies. The formation of a second adsorbate layer, paired with nanoconfinement-induced short intermolecular distances, causes the efficient packing of the propene molecules and results in an increase of olefin density.


  • Open Access

    Tandem Hydroformylation‐Aldol Condensation Reaction Enabled by Zn‐MOF‐74

    by Patrick Gäumann, Thomas Rohrbach, Luca Artiglia, Daniele Ongari, Berend Smit, Jeroen A. van Bokhoven, Marco Ranocchiari

    The tandem hydroformylation‐aldol condensation (tandem HF‐AC) reaction offers an efficient synthetic route to the synthesis of industrially relevant products. The addition of Zn‐MOF‐74 to the cobalt‐catalyzed hydroformylation of 1‐hexene enables tandem HF‐AC under milder pressure and temperature conditions than the aldox process, where zinc salts are added to cobalt‐catalyzed hydroformylation reactions to promote aldol condensation. The yield of the aldol condensation products increases by up to 17 times compared to that of the homogeneous reaction without MOF and up to 5 times compared to the aldox catalytic system. Both Co2(CO)8 and Zn‐MOF‐74 are required to significantly enhance the activity of the catalytic system. Density functional theory simulations and Fourier‐transform infrared experiments show that heptanal, the product of hydroformylation, adsorbs on the open metal site (OMS) of Zn‐MOF‐74, thereby increasing the electrophilic character of the carbonyl carbon atom and facilitating the condensation.


  • Phosphine‐Functionalized Porous Materials for Catalytic Organic Synthesis

    by Patrick Gäumann, Daniele Cartagenova, Marco Ranocchiari

    Phosphine ligands are of unique importance in catalysis, especially as ligands for transition metals. Homogeneous catalysis is by far the broadest application of phosphines in industrial processes. The heterogenization of phosphines is challenging even though it would appeal to the chemical industry as a valid strategy for recovery and reutilization. In this Review, we discuss approaches for the immobilization of phosphines through the synthesis of phosphine‐functionalized porous polymers, such as metal‐organic frameworks (MOFs), covalent organic frameworks (COFs), and porous organic polymers (POPs). We critically discuss the synthetic strategies for preparing monomers, linkers, and porous materials. We highlight the most successful applications of phosphine‐based porous catalysts and correlate them with their properties, structure, and performance.


  • Open Access

    Unraveling the molecular mechanism of MIL-53(Al) crystallization

    by Daniil Salionov, Olesya O. Semivrazhskaya, Nicola P. M. Casati, Marco Ranocchiari, Saša Bjelić, René Verel, Jeroen A. van Bokhoven, Vitaly L. Sushkevich

    The vast structural and chemical diversity of metal−organic frameworks (MOFs) provides the exciting possibility of material’s design with tailored properties for gas separation, storage and catalysis. However, after more than twenty years after first reports introducing MOFs, the discovery and control of their synthesis remains extremely challenging due to the lack of understanding of mechanisms of their nucleation and growth. Progress in deciphering crystallization pathways depends on the possibility to follow conversion of initial reagents to products at the molecular level, which is a particular challenge under solvothermal conditions. The present work introduces a detailed molecular-level mechanism of the formation of MIL-53(Al), unraveled by combining in situ time-resolved high-resolution mass-spectrometry, magic angle spinning nuclear magnetic resonance spectroscopy and X-ray diffraction. In contrast to the general belief, the crystallization of MIL-53 occurs via a solid-solid transformation mechanism, associated with the spontaneous release of monomeric aluminum. The role of DMF hydrolysis products, formate and dimethylamine, is established. Our study emphasizes the complexity of MOF crystallization chemistry, which requires case-by-case investigation using a combination of advanced in situ methods for following the induction period, the nucleation and growth across the time domain.