Pragya Singh

Nitric oxide (NO) is a toxic gas, which is dangerous for human health and causes many respiratory infections, poisoning, and lung damage. In this work, we have successfully grown ZnO nanorod film on annealed ZnO seed layer in different ambient temperatures, and the morphology of the nanorods sensing layer that affects the gas sensing response to nitric oxide (NO) gas were investigated. To acknowledge the effect of annealing treatment, the devices were fabricated with annealed seed layers in air and argon ambient at 300 °C and 500 °C for 1 h. To simulate a vertical device structure, a silver nanowire electrode covered in ZnO nanorod film was placed onto the hydrothermal grown ZnO nanorod film. We found that annealing treatment changes the seed layer’s grain size and defect concentration and is responsible for this phenomenon. The I–V and gas sensing characteristics were dependent on the oxygen defects concentration and porosity of nanorods to react with the target gas. The resulting as-deposited ZnO seed layer shows better sensing response than that annealed in an air and argon environment due to the nanorod morphology and variation in oxygen defect concentration. At room temperature, the devices show good sensing response to NO concentration of 10 ppb and up to 100 ppb. Shortly, these results can be beneficial in the NO breath detection for patients with chronic inflammatory airway disease, such as asthma.

Oriental Journal of Chemistry is a peer reviewed quarterly research journal of pure and applied chemistry. It publishes standard research papers in almost all thrust areas of current chemistry of academic and commercial importance. It provides a platform for rapid publication of quality research papers, reviews and chemistry letters. Oriental Journal of Chemistry is abstracted and indexed in almost all reputed National and International agencies.

The effect of the TiW barrier layer on the switching properties of Ga-doped ZnO (GZO) nanorods based on Electrochemical Metallization Memory is investigated. Vertically well-aligned and uniform GZO nanorods having a diameter of approximately 35 nm are hydrothermally grown on a seeding layer of ZnO deposited on indium tin oxide (ITO) coated glass substrate, to fabricate Cu/TiW/nanorods/ITO/Glass devices. The remarkable enhancement in the memory window (on/off ratio) is achieved in the 5 nm TiW barrier layer embedded device. This device exhibits endurance of more than 103 cycles and a large memory window of ~103. The conduction mechanism at different current regions is studied, and it is found that Schottky emission is dominated in the low field region. The TiW barrier layer helps to retain the Cu ions and control the Cu ions diffusion, hence control the filament growth into the resistive layer, confirmed from the X-ray photoelectron spectroscopy (XPS) analysis. This device is suitable for the future low power non-volatile memory devices.

Biosensors with high sensitivity, selectivity and a low limit of detection, reaching nano/picomolar concentrations of biomolecules, are important to the medical sciences and healthcare industry for evaluating physiological and metabolic parameters. Over the last decade, different nanomaterials have been exploited to design highly efficient biosensors for the detection of analyte biomolecules. The discovery of graphene has spectacularly accelerated research on fabricating low-cost electrode materials because of its unique physical properties, including high specific surface area, high carrier mobility, high electrical conductivity, flexibility, and optical transparency. Graphene and its oxygenated derivatives, including graphene oxide (GO) and reduced graphene oxide (rGO), are becoming an important class of nanomaterials in the field of biosensors. The presence of oxygenated functional groups makes GO nanosheets strongly hydrophilic, facilitating chemical functionalization. Graphene, GO and rGO nanosheets can be easily combined with various types of inorganic nanoparticles, including metals, metal oxides, semiconducting nanoparticles, quantum dots, organic polymers and biomolecules, to create a diverse range of graphene-based nanocomposites with enhanced sensitivity for biosensor applications. This review summarizes the advances in two-dimensional (2D) and three-dimensional (3D) graphene-based nanocomposites as emerging electrochemical and fluorescent biosensing platforms for the detection of a wide range of biomolecules with enhanced sensitivity, selectivity and a low limit of detection. The biofunctionalization and nanocomposite formation processes of graphene-based materials and their unique properties, surface functionalization, enzyme immobilization strategies, covalent immobilization, physical adsorption, biointeractions and direct electron transfer (DET) processes are discussed in connection with the design and fabrication of biosensors. The enzymatic and nonenzymatic reactions on graphene-based nanocomposite surfaces for glucose- and cholesterol-related electrochemical biosensors are analyzed. This review covers a very broad range of graphene-based electrochemical and fluorescent biosensors for the detection of glucose, cholesterol, hydrogen peroxide (H₂O₂), nucleic acids (DNA/RNA), genes, enzymes, cofactors nicotinamide adenine dinucleotide (NADH) and adenosine triphosphate (ATP), dopamine (DA), ascorbic acid (AA), uric acid (UA), cancer biomarkers, pathogenic microorganisms, food toxins, toxic heavy metal ions, mycotoxins, and pesticides. The sensitivity and selectivity of graphene-based electrochemical and fluorescent biosensors are also examined with respect to interfering analytes present in biological systems. Finally, the future outlook for the development of graphene based biosensing technology is outlined.

We successfully demonstrated a simple and low-cost nitric oxide (NO) gas sensor to deliver parts-per-billion (ppb) regime detection at room temperature operation. A vertical-channel ZnO nanorods resistor is fabricated by putting silver nanowire electrode onto the hydrothermal ZnO nanorods film. With suitable process condition, the nanorods film exhibits a uniform morphology to enable the formation of gas-permeable nanowire top electrode while also the nanorods provide good surface-to-volume ratio to deliver strong reaction with NO gas. A detection limit to 10 ppb NO is observed while the sensing dynamic range from 10 ppb to 100 ppb is obtained. The sensor is reversible and the real-time sensing response is within 30 s. The results benefit the NO breath detection for patients with chronic inflammatory airway disease, such as asthma.

In this study, we report the electrophoretic deposition (EPD) of nitrogen-boron co-doped graphene (NBG) synthesized via simple hydrothermal method and subsequent annealing at 750℃ in reducing environment. The structural, chemical-compositional and morphological investigations of the as synthesized NBG are investigated using X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The electrochemical properties of the samples are studied via cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) cycling and electrochemical impedance spectroscopy (EIS) in a conventional three-electrode system using 6M KOH aqueous electrolyte. The EPD grown binder free NBG electrode exhibits high specific capacitance of 217 Fg^-1 at the scan rate of 5 mVs^-1 which is about 1.2 times higher than the specific capacitance (180 Fg^-1 at 5 mVs^-1) of pristine reduced graphene oxide. Furthermore, this sample exhibits excellent rate capability and ~103% retention after 8800 successive charge-discharge cycles at 1 Ag^-1.