HWHuai-Yung Wang

Huai-Yung Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huai-Yung Wang has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Degenerate 2-λ Resonant VCSEL as Microwave Photonic Bit-Loaded QAM-DMT Transmitter

    by Huai-Yung Wang, Chih-Hsien Cheng, Yu-Sheng Liao, Yu-Chieh Chi, Atsushi Matsumoto, Kouichi Akahane, Gong-Ru Lin

  • Ultrahigh Capacity MMWoF Link Using 2-λ VCSEL Front-Haul Transmitter Encoded With Broadband Generalized FDM Data Stream

    by Huai-Yung Wang, Chih-Hsien Cheng, Borching Su, Gong-Ru Lin

    By employing a dual-wavelength (2-λ) vertical cavity surface emitting laser (VCSEL) directly encoded by novel quadrature amplitude modulation generalized frequency division multiplexing (QAM-GFDM) modulation schemes with optimized data capacity, a 28-GHz millimeter-wave-over-fiber (MMWoF) link is created for fusing the long-reach single-mode-fiber wired network and the beyond fifth generation (B5G) mobile wireless network without using any localized synthesizer and mixer at the remote receiver end. Detuning the k subcarrier to 2 optimizes the electrical-to-electrical 5-GHz 64-QAM-GFDM link with an error vector magnitude (EVM) of 3.04%, a signal-to-noise ratio (SNR) of 30.3 dB and a bit error ratio (BER) of 2.1×10 -13 . By using this condition to perform the long-reach 50-km optical transmission, the 5-GHz 64-QAM GFDM carried by the 2-λ VCSEL exhibits an SNR of 23.8 dB, an EVM of 6.47% and a BER of 2.2×10 -4 . By fixing the optimized k subcarriers, the maximal bandwidth and raw data rate of the 64-QAM-GFDM transmission can be achieved to 6.75 GHz and 40 Gbit/s, respectively. For the wireless transmission at the remote end, the photo-mixed MMW carrier at 28-GHz exhibits a peak power of -11.4 dBm and a carrier-to-noise ratio (CNR) of 45 dB. After performing the self-heterodyne down-conversion via power envelope detection, the receiving data amplitude is improved from 26.2 to 132 mV with adding a 3-dB attenuator for impedance matching. Under the 2-m wireless transmission via horn antenna pair, the maximal bandwidth and data rate of the received 4-QAM GFDM data respectively achieve 2 GHz and 4 Gbit/s.


  • QAM-GFDM of Dual-Mode VCSEL Mixed 28-GHz MMW Carrier for Fiber-Wireless Link

    by Huai-Yung Wang, Chih-Hsien Cheng, Borching Su, Gong-Ru Lin

    An optical heterodyned 28-GHz carrier generation is demonstrated for synthesizer-free fifth-generation (5G) millimeter wave over fiber (MMWoF) link by using orthogonally polarized dual-mode vertical-cavity surface-emitting laser (VCSEL) as the frontend transmitter, and the power envelope detection is employed for self-heterodyne down-conversion of the generalized frequency division multiplexing (GFDM) data stream. The demonstrated MMWoF link exhibits superior immunity to the residual frequency and phase noises as well as the inter-carrier interference induced by the free-running dual-mode carrier. For back-to-back optical downstream wireline transmission, the receiving GFDM data optimizes its bit error rate (BER) to 2.2×10 −4 by adjusting the bias current of the dual-mode VCSEL to 8 mA (3 I th ), and by grouping the GFDM data matrix with total symbols of N = K×M with K = 2 subcarriers and M = 24 timeslots. After a long-reach delivering the optical data stream over 50-km dispersion-managed single-mode fiber (DM-SMF), the qualified receiving power sensitivity is −12 dBm, whereas the decoding GFDM data reveals improved receiving sensitivity with an extremely low power penalty of only 0.3 dB. For the wireless transmission after optical downstream receiving at the remote node, the self-heterodyned MMW carrier exhibits peak power of −62.3 dBm and carrier-to-noise (CNR) of 26.8 dB over long-reach 50-km DM-SMF downstream optical link. In comparison with the mutual heterodyned from two incoherent optical carriers, the self-heterodyned frequency fluctuation can be suppressed from >500 to −3 . By combining the free-running dual-mode source with two advanced techniques including mode-power equalization and self-heterodyned power envelope detection, the proposed synthesizer-free MMWoF network has demonstrated excellent immunity to the phase/frequency noise, inter-carrier interference which is particularly suitable for building up the compact and simplified optical transmitter and microwave receiver modules with cost-effective MMW self-heterodyne scheme.


  • Effect of Chirped Dispersion and Modal Partition Noise on Multimode VCSEL Encoded With NRZ-OOK and PAM-4 Formats

    by Wei-Chi Lo, Wei-Li Wu, Chih-Hsien Cheng, Huai-Yung Wang, Cheng-Ting Tsai, Chao-Hsin Wu, Gong-Ru Lin

    Chirp-dispersion and data transmission analyses of the multimode vertical-cavity surface-emitting laser (MM-VCSEL) with a 7.5-m oxide-confined aperture and a root-mean-square spectral linewidth of 1 nm is performed for intra-data-center application. For directly modulating the NRZ-OOK and the PAM-4 data streams, an optimized bias current of 17 mA and a data amplitude of 800 mV are selected to provide the MM-VCSEL with an output optical power of 6.1 mW and a transverse mode number of 17. Such an optimized operation enables the MM-VCSEL with a differential resistance of 45.3 to approach the impedance matching by driving the circuit such that the -3-dB bandwidth can be achieved to 23.8 GHz. The relative intensity noise and mode-partition-noise of the MM-VCSEL are analyzed to perform the optimized NRZ-OOK/PAM4 data encoding. By utilizing the pre-emphasis technique to compensate for the intensity and phase variation, the encoded NRZ-OOK and PAM-4 can be respectively promoted to 61 Gbit/s and 96 Gbit/s in the BtB case. After passing through the 100-m OM5 MMF link to suffer the severe modal dispersion, the data rate would respectively degrade to 45 Gbit/s (or 4.5 Gbitkm/s) and 70 Gbit/s (or 7 Gbitkm/s) for OOK and PAM-4 transmission.


  • Quad-Mode VCSEL Optical Carrier for Long-Reach Ka-Band Millimeter-Wave Over Fiber Link

    by Cheng-Ting Tsai, Huai-Yung Wang, Yu-Chieh Chi, Chih-Hsien Cheng, Gong-Ru Lin

    A quad-mode optical carrier generated by mode-deviated injection-locking a vertical-cavity surface-emitting laser (VCSEL) at a beating frequency of 40 GHz is demonstrated for establishing a long-reach millimeter-wave over fiber (MMWoF) link, in which only one mode of the quad-mode optical carriers is modulated by the 16-quadrature amplitude modulation (16-QAM) orthogonal frequency division multiplexing (OFDM) data stream to achieve an optical single-carrier modulation (OSCM). Such an OSCM operation reduces the long-reach single-mode-fiber (SMF) transmission induced RF power fading effect to significantly suppress the frequency notch in the modulated spectrum of the delivered QAM-OFDM data after remotely heterodyne detection. With destructively interfered beating the quad-mode optical carrier at the remote node, the peak power of the optically heterodyned MMW central carrier can be attenuated by 38.3 dB, which saves the gain of the photodetector and electrical amplifier to efficiently boost the carried QAM-OFDM data. This architecture ensures sufficient power of the 16-QAM OFDM data after optoelectrical conversion and facilitates the quad-mode optical carrier based MMWoF link to achieve 50-km wired SMF and 10-m wireless MMW transmissions with the error vector magnitude of 17.2%, signal-to-noise ratio of 15.28 dB, and bit error rate of 3.5×10 -3 at a data rate of 12 Gbps.


  • Nonlinear and low-loss tantalum pentoxide based micro-ring resonator by ion-assisted electron-beam deposition

    by Yi-Jen Chiu, Fu-Yan Yan, Jia-Wei Liu, Jia-Chi Lan, Te-Keng Wang, Chao-Hong Lin, Sung-Wen Huang Chen, Hao-Chung Kuo, Huai-Yung Wang, Chih-Hsien Cheng, et al.

    Tantalum pentoxide (Ta2O5) is a promising material for optical waveguide applications of photonics integration due to its excellent linear and nonlinear optical properties, such as high refractive index, large bandgap, and high nonlinearity. The quality of thin film deposition will then be critical for realizing optical waveguide devices and modules. In this work, an ion-assisted electron-beam evaporation system has been used to deposit such thin film. As low as 0.73 nm thickness roughness has been demonstrated in a 700 nm thick film, indicating it as a candidate for fabricating a low-loss waveguide. An optical waveguide-based ring resonator was made for examining the optical waveguide performance. Through the flat surface morphology, a low propagation loss of 1.4 dB/cm with an unloaded quality factor of 3 × 105 ring resonance has been realized. The nonlinear index of refraction (n2) in as-deposited Ta2O5 film was found to be in an order of magnitude of 10−14 cm2/W, which was also confirmed by both Z-scan technique and all-optical modulation technique. By such high bandgap properties, a nonlinear absorption threshold of few TW/cm2 was also observed for the first time. The measured device performances are comparable to the state-of-the-art results from up-to-date counterparts.


  • 4-QAM OFDM Data Switching via Free Carrier Absorption in Si-Rich SiC Waveguide

    by Yen-Wei Hsueh, Chih-Hsien Cheng, Cai-Syuan Fu, Huai-Yung Wang, Bo-Ji Huang, Gong-Ru Lin

    The all-optical cross-wavelength quadrature amplitude modulation orthogonal frequency-division multiplexing (QAM-OFDM) data switching in the silicon rich silicon carbide (Si-rich SiC) micro-ring (μ-ring) waveguide is demonstrated for the first time by using the two-photon absorption (TPA) induced free carrier absorption (FCA) process. With enlarging the allowable 4-QAM OFDM data bandwidth to 1.16 GHz, the all-optical 4-QAM OFDM pump-to-probe switching with allowable bandwidth of 1.16 GHz can achieve a raw data rate up to 2.32 Gbit/s with forward error correction (FEC) qualified error vector magnitude (EVM), signal-to-noise ratio (SNR), and bit-err-ratio (BER) of 31.9%, 9.92 dB, and 8.7× ${10^{-4}}$ , respectively. With upgrading the bandwidth of electrical pre-amplifier to 1.5 GHz, the wavelength-converted probe data can successfully pass the FEC criterion with qualified SNR of 9.49 dB, BER of 1.4×10 ${m^{-3}}$ and EVM of 33.5%, to demonstrate the all-optical switching data rate approaching 3 Gbit/s.


  • Temperature and Noise Dependence of Tri-Mode VCSEL Carried 120-Gbit/s QAM-OFDM Data in Back-to-Back and OM5-MMF Links

    by Cheng-Yi Huang, Cheng-Ting Tsai, Jui-Hung Weng, Chih-Hsien Cheng, Huai-Yung Wang, Chao-Hsin Wu, Milton Feng, Gong-Ru Lin

    The transmission performances of the tri-mode vertical cavity surface-emitting laser (VCSEL) carrying 16-quadrature amplitude modulation orthogonal frequency division multiplexing (16-QAM OFDM) data streams at a data rate beyond 100 Gbit/s are demonstrated in OM5 and OM4 multi-mode fibers (MMFs) over 100 m. By using the double oxide-confined aperture with a diameter of 5 μm, the tri-mode VCSEL provides three main transverse modes at a power of 2 mW and a quantum efficiency of 0.4 mW/mA, in which these main transverse modes individually contribute to 53.1%, 37.6%, and 9.3% of the output power from the tri-mode VCSEL for delivering the QAM-OFDM data. With optimizing the bias current of the tri-mode VCSEL to 8 mA (32 $I_th$ ) and pre-leveling the QAM-OFDM subcarrier amplitudes at a slope of 0.5 dB/GHz in the back-to-back (BtB) transmission case, the raw data rate up to 120 Gbit/s can be achieved under the FEC receiving criterion. In particular, the performance of the tri-mode VCSEL operating at the temperature of up to 85°C in BtB case is also demonstrated, while its lasing spectrum translates from tri-mode to quasi-single-mode because of the heating induced carrier dissipation and index reprofiling process. After propagating through the 100-m OM5-MMF, the pre-leveled 16-QAM OFDM data carried by the tri-mode VCSEL guarantees the 104-Gbit/s FEC-certified transmission with a receiving power penalty of 3.8 dB.


  • Suppression of Relative Intensity and Mode Partition Noises in Orthogonally Polarized Dual-Wavelength VCSEL

    by Huai-Yung Wang, Chih-Hsien Cheng, Gong-Ru Lin

    A synthesizer-free 28-GHz millimeter wave (MMW) carrier is generated by using orthogonally polarized dual-mode vertical-cavity surface-emitting laser (VCSEL) as the frontend transmitter. After equalizing the dual modes with an extremely weak power as low as -26 dBm (2.5 W) at TM-mode polarization, the dual-mode power extinction of only 5.4 dB is achieved for optimizing the remote-node optical heterodyne of 28-GHz MMW carrier with a peak power of -59.8 dBm before antenna propagation with remaining similar relative intensity noise (RIN) as compared to the free-running case. Moreover, the mode partition noise (MPN) is increased less than 2 dBc/Hz by TM-mode injection at -26 dBm, whereas the TE-mode control results in unchanged noise spectrum as same as that obtained in free-running case even if the master power is increased to -18 dBm.


  • White-light color conversion with red/green/violet laser diodes and yellow light-emitting diode mixing for 34.8 Gbit/s visible lighting communication

    by Wei-Chun Wang, Chih-Hsien Cheng, Huai-Yung Wang, Gong-Ru Lin

    The visible wavelength-division multiplexing (VWDM) optical wireless communication beyond 30 Gbit/s with a white-light beam mixed by red/green/violet (R/G/V) laser diodes (LDs) and yellow (Y) LED is demonstrated via quadrature amplitude modulation discrete multitone modulation (QAM DMT). To facilitate both high-quality indoor lighting and high-speed optical wireless communication, the R/G/V-LD white-light module incorporates with a Y-LED to provide a high color rendering index (CRI) and encapsulates with a frosted glass to enlarge its divergent angle. By respectively encoding the R/G/V-LDs with the filtered QAM DMT data in a back-to-back case, the total raw data rate as high as 34.8 Gbit/s is achieved by encoded R/G/V-LDs with respective VWDM data rates of 18/7.2/9.6 Gbit/s. To fulfill the demanded CRI and correlated color temperature (CCT) for indoor white-lighting, the yellow LED contributes the yellowish-orange luminescence with flexible CCT and CRI varying from 3952 K to 3031 K and from 0 to 45.9, respectively. A cold white-light carrier at a CCT of 4852 K, CRI of 71.6, and CIE of (0.3652, 0.4942) is also approached by attenuating the red LD power, and such a cold white-light spot with an illuminance of 6800 lux and a divergent solid angle of 0.89 steradian (sr) can support VWDM data transmission at 28.4 Gbit/s.