Florian-Emanuel Brack
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Florian-Emanuel Brack has a total of 289 co-authors. Here are the top co-authors by number of shared publications:
- Ulrich Schramm
Helmholtz-Zentrum Dresden-Rossendorf
31 shared publications - Florian Kroll
Helmholtz-Zentrum Dresden - Rossendorf, Dresden, 01328, Germany
25 shared publications - Karl Zeil
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
24 shared publications - Josefine Metzkes-Ng
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
21 shared publications - Hans-Peter Schlenvoigt
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
19 shared publications - Stephan D. Kraft
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
17 shared publications
Latest Publications
- Open Access
- 1 September 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (9)
Publisher’s Note: “Absolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches” [Rev. Sci. Instrum. 95, 073303 (2024)]
This article was originally published online on 26 July 2024 with missing affiliations for several authors. All author affiliations appear correctly above. AIP This article was originally published online on 26 July 2024 with missing affiliations for several authors. All author affiliations appear correctly above. AIP
- 1 September 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (9)
Open AccessPublisher’s Note: “Absolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches” [Rev. Sci. Instrum. 95, 073303 (2024)]
This article was originally published online on 26 July 2024 with missing affiliations for several authors. All author affiliations appear correctly above. AIP This article was originally published online on 26 July 2024 with missing affiliations for several authors. All author affiliations appear correctly above. AIP
- Open Access
- 1 July 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (7)
Absolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches
Laser-plasma accelerators (LPAs) can deliver pico- to nanosecond long proton bunches with ≳100 nC of charge dispersed over a broad energy spectrum. Increasing the repetition rates of today’s LPAs is a necessity for their practical application. This, however, creates a need for real-time proton bunch diagnostics. Scintillating screens are one detector solution commonly applied in the field of electron LPAs for spatially resolved particle and radiation detection. Yet their establishment for LPA proton detection is only slowly taking off, also due to the lack of available calibrations. In this paper, we present an absolute proton number calibration for the scintillating screen type DRZ High (Mitsubishi Chemical Corporation, Düsseldorf, Germany), one of the most sensitive screens according to calibrations for relativistic electrons and x rays. The presented absolute light yield calibration shows an uncertainty of the proton number of 10% and can seamlessly be applied at other LPA facilities. For proton irradiation of the DRZ High screen, we find an increase in light yield of >60% compared to reference calibration data for relativistic electrons. Moreover, we investigate the scintillating screen light yield dependence on proton energy since many types of scintillators (e.g., plastic, liquid, and inorganic) show a reduced light yield for increased local energy deposition densities, an effect termed ionization quenching. The ionization quenching can reduce the light yield for low-energy protons by up to ∼20%. This work provides all necessary data for absolute spectral measurements of LPA protons with DRZ High scintillating screens, e.g., when used in the commonly applied Thomson parabola spectrometers.
- 1 July 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (7)
Open AccessAbsolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches
Laser-plasma accelerators (LPAs) can deliver pico- to nanosecond long proton bunches with ≳100 nC of charge dispersed over a broad energy spectrum. Increasing the repetition rates of today’s LPAs is a necessity for their practical application. This, however, creates a need for real-time proton bunch diagnostics. Scintillating screens are one detector solution commonly applied in the field of electron LPAs for spatially resolved particle and radiation detection. Yet their establishment for LPA proton detection is only slowly taking off, also due to the lack of available calibrations. In this paper, we present an absolute proton number calibration for the scintillating screen type DRZ High (Mitsubishi Chemical Corporation, Düsseldorf, Germany), one of the most sensitive screens according to calibrations for relativistic electrons and x rays. The presented absolute light yield calibration shows an uncertainty of the proton number of 10% and can seamlessly be applied at other LPA facilities. For proton irradiation of the DRZ High screen, we find an increase in light yield of >60% compared to reference calibration data for relativistic electrons. Moreover, we investigate the scintillating screen light yield dependence on proton energy since many types of scintillators (e.g., plastic, liquid, and inorganic) show a reduced light yield for increased local energy deposition densities, an effect termed ionization quenching. The ionization quenching can reduce the light yield for low-energy protons by up to ∼20%. This work provides all necessary data for absolute spectral measurements of LPA protons with DRZ High scintillating screens, e.g., when used in the commonly applied Thomson parabola spectrometers.
- Top Cited PapersOpen Access
- 13 May 2024
- Published by Springer Nature in Nature Physics
- Vol. 20 (7) , 1211-1216
Laser-driven high-energy proton beams from cascaded acceleration regimes
Laser-driven ion accelerators can deliver high-energy, high-peak current beams and are thus attracting attention as a compact alternative to conventional accelerators. However, achieving sufficiently high energy levels suitable for applications such as radiation therapy remains a challenge for laser-driven ion accelerators. Here we generate proton beams with a spectrally separated high-energy component of up to 150 MeV by irradiating solid-density plastic foil targets with ultrashort laser pulses from a repetitive petawatt laser. The preceding laser light heats the target, leading to the onset of relativistically induced transparency upon main pulse arrival. The laser peak then penetrates the initially opaque target and triggers proton acceleration through a cascade of different mechanisms, as revealed by three-dimensional particle-in-cell simulations. The transparency of the target can be used to identify the high-performance domain, making it a suitable feedback parameter for automated laser and target optimization to enhance stability of plasma accelerators in the future.
- 13 May 2024
- Published by Springer Nature in Nature Physics
- Vol. 20 (7) , 1211-1216
Top Cited PapersOpen AccessLaser-driven high-energy proton beams from cascaded acceleration regimes
Laser-driven ion accelerators can deliver high-energy, high-peak current beams and are thus attracting attention as a compact alternative to conventional accelerators. However, achieving sufficiently high energy levels suitable for applications such as radiation therapy remains a challenge for laser-driven ion accelerators. Here we generate proton beams with a spectrally separated high-energy component of up to 150 MeV by irradiating solid-density plastic foil targets with ultrashort laser pulses from a repetitive petawatt laser. The preceding laser light heats the target, leading to the onset of relativistically induced transparency upon main pulse arrival. The laser peak then penetrates the initially opaque target and triggers proton acceleration through a cascade of different mechanisms, as revealed by three-dimensional particle-in-cell simulations. The transparency of the target can be used to identify the high-performance domain, making it a suitable feedback parameter for automated laser and target optimization to enhance stability of plasma accelerators in the future.
- Open Access
- 1 April 2024
- Published by Cambridge University Press (CUP) in Journal of Plasma Physics
- Vol. 90 (3) , 905900302
Towards ion stopping power experiments with the laser-driven LIGHT beamline
The main emphasis of the Laser Ion Generation, Handling and Transport (LIGHT) beamline at GSI Helmholtzzentrum für Schwerionenforschung GmbH are phase-space manipulations of laser-generated ion beams. In recent years, the LIGHT collaboration has successfully generated and focused intense proton bunches with an energy of 8 MeV and a temporal duration shorter than 1 ns (FWHM). An interesting area of application that exploits the short ion bunch properties of LIGHT is the study of ion-stopping power in plasmas, a key process in inertial confinement fusion for understanding energy deposition in dense plasmas. The most challenging regime is found when the projectile velocity closely approaches the thermal plasma electron velocity ( $v_{i}\approx v_{e,\text {th}}$ ), for which existing theories show high discrepancies. Since conclusive experimental data are scarce in this regime, we plan to conduct experiments on laser-generated plasma probed with ions generated with LIGHT at a higher temporal resolution than previously achievable. The high temporal resolution is important because the parameters of laser-generated plasmas are changing on the nanosecond time scale. To meet this goal, our recent studies have dealt with ions of lower kinetic energies. In 2021, laser accelerated carbon ions were transported with two solenoids and focused temporally with LIGHT's radio frequency cavity. A bunch length of 1.2 ns (FWHM) at an energy of 0.6 MeV u $^{-1}$ was achieved. In 2022, protons with an energy of 0.6 MeV were transported and temporally compressed to a bunch length of 0.8 ns. The proton beam was used to measure the energy loss in a cold foil. Both the ion and proton beams will also be employed for energy loss measurements in a plasma target.- 1 April 2024
- Published by Cambridge University Press (CUP) in Journal of Plasma Physics
- Vol. 90 (3) , 905900302
Open AccessTowards ion stopping power experiments with the laser-driven LIGHT beamline
The main emphasis of the Laser Ion Generation, Handling and Transport (LIGHT) beamline at GSI Helmholtzzentrum für Schwerionenforschung GmbH are phase-space manipulations of laser-generated ion beams. In recent years, the LIGHT collaboration has successfully generated and focused intense proton bunches with an energy of 8 MeV and a temporal duration shorter than 1 ns (FWHM). An interesting area of application that exploits the short ion bunch properties of LIGHT is the study of ion-stopping power in plasmas, a key process in inertial confinement fusion for understanding energy deposition in dense plasmas. The most challenging regime is found when the projectile velocity closely approaches the thermal plasma electron velocity ( $v_{i}\approx v_{e,\text {th}}$ ), for which existing theories show high discrepancies. Since conclusive experimental data are scarce in this regime, we plan to conduct experiments on laser-generated plasma probed with ions generated with LIGHT at a higher temporal resolution than previously achievable. The high temporal resolution is important because the parameters of laser-generated plasmas are changing on the nanosecond time scale. To meet this goal, our recent studies have dealt with ions of lower kinetic energies. In 2021, laser accelerated carbon ions were transported with two solenoids and focused temporally with LIGHT's radio frequency cavity. A bunch length of 1.2 ns (FWHM) at an energy of 0.6 MeV u $^{-1}$ was achieved. In 2022, protons with an energy of 0.6 MeV were transported and temporally compressed to a bunch length of 0.8 ns. The proton beam was used to measure the energy loss in a cold foil. Both the ion and proton beams will also be employed for energy loss measurements in a plasma target. - Open Access
- 23 January 2024
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 12, 1-11
miniSCIDOM: a scintillator-based tomograph for volumetric dose reconstruction of single laser-driven proton bunches
Laser plasma accelerators (LPAs) enable the generation of intense and short proton bunches on a micrometre scale, thus offering new experimental capabilities to research fields such as ultra-high dose rate radiobiology or material analysis. Being spectrally broadband, laser-accelerated proton bunches allow for tailored volumetric dose deposition in a sample via single bunches to excite or probe specific sample properties. The rising number of such experiments indicates a need for diagnostics providing spatially resolved characterization of dose distributions with volumes of approximately 1 cm ${}^3$ for single proton bunches to allow for fast online feedback. Here we present the scintillator-based miniSCIDOM detector for online single-bunch tomographic reconstruction of dose distributions in volumes of up to approximately 1 cm ${}^3$ . The detector achieves a spatial resolution below 500 $\unicode{x3bc}$ m and a sensitivity of 100 mGy. The detector performance is tested at a proton therapy cyclotron and an LPA proton source. The experiments’ primary focus is the characterization of the scintillator’s ionization quenching behaviour.- 23 January 2024
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 12, 1-11
Open AccessminiSCIDOM: a scintillator-based tomograph for volumetric dose reconstruction of single laser-driven proton bunches
Laser plasma accelerators (LPAs) enable the generation of intense and short proton bunches on a micrometre scale, thus offering new experimental capabilities to research fields such as ultra-high dose rate radiobiology or material analysis. Being spectrally broadband, laser-accelerated proton bunches allow for tailored volumetric dose deposition in a sample via single bunches to excite or probe specific sample properties. The rising number of such experiments indicates a need for diagnostics providing spatially resolved characterization of dose distributions with volumes of approximately 1 cm ${}^3$ for single proton bunches to allow for fast online feedback. Here we present the scintillator-based miniSCIDOM detector for online single-bunch tomographic reconstruction of dose distributions in volumes of up to approximately 1 cm ${}^3$ . The detector achieves a spatial resolution below 500 $\unicode{x3bc}$ m and a sensitivity of 100 mGy. The detector performance is tested at a proton therapy cyclotron and an LPA proton source. The experiments’ primary focus is the characterization of the scintillator’s ionization quenching behaviour. - Open Access
- 8 September 2023
- Published by IOP Publishing in Physics in Medicine & Biology
- Vol. 68 (18) , 185009
Dosimetry for radiobiological in vivo experiments at laser plasma-based proton accelerators
Objective. Laser plasma-based accelerators (LPAs) of protons can contribute to research of ultra-high dose rate radiobiology as they provide pulse dose rates unprecedented at medical proton sources. Yet, LPAs pose challenges regarding precise and accurate dosimetry due to the high pulse dose rates, but also due to the sources’ lower spectral stability and pulsed operation mode. For in vivo models, further challenges arise from the necessary small field dosimetry for volumetric dose distributions. For these novel source parameters and intended applications, a dosimetric standard needs to be established. Approach. In this work, we present a dosimetry and beam monitoring framework for in vivo irradiations of small target volumes with LPA protons, solving aforementioned challenges. The volumetric dose distribution in a sample (mean dose value and lateral/depth dose inhomogeneity) is provided by combining two independent dose measurements using radiochromic films (dose rate-independent) and ionization chambers (dose rate-dependent), respectively. The unique feature of the dosimetric setup is beam monitoring with a transmission time-of-flight spectrometer to quantify spectral fluctuations of the irradiating proton pulses. The resulting changes in the depth dose profile during irradiation of an in vivo sample are hence accessible and enable pulse-resolved depth dose correction for each dose measurement. Main results. A first successful small animal pilot study using an LPA proton source serves as a testcase for the presented dosimetry approach and proves its performance in a realistic setting. Significance. With several facilities worldwide either setting up or already using LPA infrastructure for radiobiological studies with protons, the importance of LPA-adapted dosimetric frameworks as presented in this work is clearly underlined.
- 8 September 2023
- Published by IOP Publishing in Physics in Medicine & Biology
- Vol. 68 (18) , 185009
Open AccessDosimetry for radiobiological in vivo experiments at laser plasma-based proton accelerators
Objective. Laser plasma-based accelerators (LPAs) of protons can contribute to research of ultra-high dose rate radiobiology as they provide pulse dose rates unprecedented at medical proton sources. Yet, LPAs pose challenges regarding precise and accurate dosimetry due to the high pulse dose rates, but also due to the sources’ lower spectral stability and pulsed operation mode. For in vivo models, further challenges arise from the necessary small field dosimetry for volumetric dose distributions. For these novel source parameters and intended applications, a dosimetric standard needs to be established. Approach. In this work, we present a dosimetry and beam monitoring framework for in vivo irradiations of small target volumes with LPA protons, solving aforementioned challenges. The volumetric dose distribution in a sample (mean dose value and lateral/depth dose inhomogeneity) is provided by combining two independent dose measurements using radiochromic films (dose rate-independent) and ionization chambers (dose rate-dependent), respectively. The unique feature of the dosimetric setup is beam monitoring with a transmission time-of-flight spectrometer to quantify spectral fluctuations of the irradiating proton pulses. The resulting changes in the depth dose profile during irradiation of an in vivo sample are hence accessible and enable pulse-resolved depth dose correction for each dose measurement. Main results. A first successful small animal pilot study using an LPA proton source serves as a testcase for the presented dosimetry approach and proves its performance in a realistic setting. Significance. With several facilities worldwide either setting up or already using LPA infrastructure for radiobiological studies with protons, the importance of LPA-adapted dosimetric frameworks as presented in this work is clearly underlined.
- Open Access
- 7 July 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Ultra-short pulse laser acceleration of protons to 80 MeV from cryogenic hydrogen jets tailored to near-critical density
Laser plasma-based particle accelerators attract great interest in fields where conventional accelerators reach limits based on size, cost or beam parameters. Despite the fact that particle in cell simulations have predicted several advantageous ion acceleration schemes, laser accelerators have not yet reached their full potential in producing simultaneous high-radiation doses at high particle energies. The most stringent limitation is the lack of a suitable high-repetition rate target that also provides a high degree of control of the plasma conditions required to access these advanced regimes. Here, we demonstrate that the interaction of petawatt-class laser pulses with a pre-formed micrometer-sized cryogenic hydrogen jet plasma overcomes these limitations enabling tailored density scans from the solid to the underdense regime. Our proof-of-concept experiment demonstrates that the near-critical plasma density profile produces proton energies of up to 80 MeV. Based on hydrodynamic and three-dimensional particle in cell simulations, transition between different acceleration schemes are shown, suggesting enhanced proton acceleration at the relativistic transparency front for the optimal case.
- 7 July 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Open AccessUltra-short pulse laser acceleration of protons to 80 MeV from cryogenic hydrogen jets tailored to near-critical density
Laser plasma-based particle accelerators attract great interest in fields where conventional accelerators reach limits based on size, cost or beam parameters. Despite the fact that particle in cell simulations have predicted several advantageous ion acceleration schemes, laser accelerators have not yet reached their full potential in producing simultaneous high-radiation doses at high particle energies. The most stringent limitation is the lack of a suitable high-repetition rate target that also provides a high degree of control of the plasma conditions required to access these advanced regimes. Here, we demonstrate that the interaction of petawatt-class laser pulses with a pre-formed micrometer-sized cryogenic hydrogen jet plasma overcomes these limitations enabling tailored density scans from the solid to the underdense regime. Our proof-of-concept experiment demonstrates that the near-critical plasma density profile produces proton energies of up to 80 MeV. Based on hydrodynamic and three-dimensional particle in cell simulations, transition between different acceleration schemes are shown, suggesting enhanced proton acceleration at the relativistic transparency front for the optimal case.
- Open Access
- 19 May 2023
- Published by Springer Nature in Research Square
Laser-driven high-energy proton beams from cascaded acceleration regimes
Laser-driven ion accelerators can deliver high-energy, high peak current beams from relativistic laser plasmas formed in solid-density materials [1, 2]. This innovative concept attracts a lot of attention for various multidisciplinary applications as a compact alternative to conventional accelerators [3]. However, achieving energy levels suitable for applications such as radiation therapy remains a challenge for laser-driven ion accelerators. Here, we report on experimental generation of plasma-accelerated proton beams with a spectrally separated high-energy component of up to 150MeV by irradiating solid-density plastic foil targets with ultrashort laser pulses from a repetitive Petawatt laser. Three-dimensional particle-in-cell simulations reveal that the observed beam parameters result from cascaded acceleration regimes that occur at the onset of relativistically induced transparency. The ultrashort pulse duration allows a rapid sequence of these regimes at highest intensity, enabling proton acceleration to unprecedented energy levels. Target transparency was identified to discriminate the high-performance domain of the acquired data set, making it a suitable feedback parameter for automated laser and target optimisation to enhance stability of plasma accelerators in the future. Ultimately, our results encourage further exploration and application of laser-driven plasmas as compact proton accelerators in the multi-100MeV range.
- 19 May 2023
- Published by Springer Nature in Research Square
Open AccessLaser-driven high-energy proton beams from cascaded acceleration regimes
Laser-driven ion accelerators can deliver high-energy, high peak current beams from relativistic laser plasmas formed in solid-density materials [1, 2]. This innovative concept attracts a lot of attention for various multidisciplinary applications as a compact alternative to conventional accelerators [3]. However, achieving energy levels suitable for applications such as radiation therapy remains a challenge for laser-driven ion accelerators. Here, we report on experimental generation of plasma-accelerated proton beams with a spectrally separated high-energy component of up to 150MeV by irradiating solid-density plastic foil targets with ultrashort laser pulses from a repetitive Petawatt laser. Three-dimensional particle-in-cell simulations reveal that the observed beam parameters result from cascaded acceleration regimes that occur at the onset of relativistically induced transparency. The ultrashort pulse duration allows a rapid sequence of these regimes at highest intensity, enabling proton acceleration to unprecedented energy levels. Target transparency was identified to discriminate the high-performance domain of the acquired data set, making it a suitable feedback parameter for automated laser and target optimisation to enhance stability of plasma accelerators in the future. Ultimately, our results encourage further exploration and application of laser-driven plasmas as compact proton accelerators in the multi-100MeV range.
- Open Access
- 30 January 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (1) , 014070
Transient Laser-Induced Breakdown of Dielectrics in Ultrarelativistic Laser-Solid Interactions
For high-intensity laser-solid interactions, the absolute density and surface density gradients of the target at the arrival of the ultrarelativistic laser peak are critical parameters. Accurate modeling of the leading edge-driven target preexpansion is desired to strengthen the predictive power of associated computer simulations. The transition from an initial solid state to a plasma state, i.e., the breakdown of the solid, defines the starting point of the subsequent target preexpansion. In this work, we report on the time-resolved observation of transient laser-induced breakdown (LIB) during the leading edge of high-intensity petawatt-class laser pulses with peak intensities of up to in interaction with dielectric cryogenic hydrogen jet targets. LIB occurs much earlier than what is typically expected following the concept of barrier suppression ionization. The observation is explained by comparing a characterization study of target-specific LIB thresholds with laser contrast measurements. The results demonstrate the relevance of the laser pulse duration dependence of LIB for high-intensity laser-solid interactions. We provide an effective approach to determine the onset of LIB and thereby the starting point of target preexpansion in other laser-target systems.- 30 January 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (1) , 014070
Open AccessTransient Laser-Induced Breakdown of Dielectrics in Ultrarelativistic Laser-Solid Interactions
For high-intensity laser-solid interactions, the absolute density and surface density gradients of the target at the arrival of the ultrarelativistic laser peak are critical parameters. Accurate modeling of the leading edge-driven target preexpansion is desired to strengthen the predictive power of associated computer simulations. The transition from an initial solid state to a plasma state, i.e., the breakdown of the solid, defines the starting point of the subsequent target preexpansion. In this work, we report on the time-resolved observation of transient laser-induced breakdown (LIB) during the leading edge of high-intensity petawatt-class laser pulses with peak intensities of up to in interaction with dielectric cryogenic hydrogen jet targets. LIB occurs much earlier than what is typically expected following the concept of barrier suppression ionization. The observation is explained by comparing a characterization study of target-specific LIB thresholds with laser contrast measurements. The results demonstrate the relevance of the laser pulse duration dependence of LIB for high-intensity laser-solid interactions. We provide an effective approach to determine the onset of LIB and thereby the starting point of target preexpansion in other laser-target systems. - Open Access
- 3 November 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (11) , 111301
Analyzing the filamentation of MeV-range proton bunches in a laser-driven ion beamline and optimizing their peak intensity
In this article, we report on the latest investigations and achievements in proton beam shaping with our laser-driven ion beamline at GSI Helmholtzzentrum für Schwerionenforschung GmbH. This beamline was realized within the framework of the Laser Ion Generation, Handling, and Transport (LIGHT) collaboration to study the combination of laser-driven ion beams with conventional accelerator components. At its current state, the ions are accelerated by the high-power laser PHELIX via target normal sheath acceleration, and two pulsed high-magnetic solenoids are used for energy selection, transport, and transverse focusing. In between the two solenoids, there is a rf cavity that gives the LIGHT beamline the capability to longitudinally manipulate and temporally compress ion bunches to sub-nanosecond durations. To get optimal results, the rf cavity has to be synchronized with the PHELIX laser and therefore a reliable measurement of the temporal ion beam profile is necessary. In the past, these measurements showed unexpected correlations between the temporal beam profile and the phase as well as the electric field strength of the cavity. In this article, we present a numerical simulation of the beam transport through the LIGHT beamline which explains this behavior by a beam filamentation. We also report on our latest experimental campaigns, in which we combined transverse and longitudinal focusing for the first time. This led to proton bunches with a peak intensity of at a central energy of () MeV. The intensity refers to a circle with a diameter of () mm that encloses 50% of the protons in the focal spot at the end of the beamline. The temporal bunch width at this position was () ps (FWHM).- 3 November 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (11) , 111301
Open AccessAnalyzing the filamentation of MeV-range proton bunches in a laser-driven ion beamline and optimizing their peak intensity
In this article, we report on the latest investigations and achievements in proton beam shaping with our laser-driven ion beamline at GSI Helmholtzzentrum für Schwerionenforschung GmbH. This beamline was realized within the framework of the Laser Ion Generation, Handling, and Transport (LIGHT) collaboration to study the combination of laser-driven ion beams with conventional accelerator components. At its current state, the ions are accelerated by the high-power laser PHELIX via target normal sheath acceleration, and two pulsed high-magnetic solenoids are used for energy selection, transport, and transverse focusing. In between the two solenoids, there is a rf cavity that gives the LIGHT beamline the capability to longitudinally manipulate and temporally compress ion bunches to sub-nanosecond durations. To get optimal results, the rf cavity has to be synchronized with the PHELIX laser and therefore a reliable measurement of the temporal ion beam profile is necessary. In the past, these measurements showed unexpected correlations between the temporal beam profile and the phase as well as the electric field strength of the cavity. In this article, we present a numerical simulation of the beam transport through the LIGHT beamline which explains this behavior by a beam filamentation. We also report on our latest experimental campaigns, in which we combined transverse and longitudinal focusing for the first time. This led to proton bunches with a peak intensity of at a central energy of () MeV. The intensity refers to a circle with a diameter of () mm that encloses 50% of the protons in the focal spot at the end of the beamline. The temporal bunch width at this position was () ps (FWHM).