Kaiyu Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kaiyu Xie has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ali Reza Kamali
Northeastern University
5 shared publications Ali Reza Kamali
2 shared publications- Qiang Sun
School of Metallurgy, Northeastern University, Shenyang 110819, P. R. China
2 shared publications Zhongning Shi
2 shared publicationsDongwei Qiao
Energy and Environmental Materials Research Centre (E2MC), School of Metallurgy, Northeastern University, Shenyang 110819, China
1 shared publicationDuo Wang
1 shared publication
Latest Publications
- 11 March 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (16) , 4320-4329
Water-assisted clean electro-preparation of Co3Fe7 in molten salts: its enhanced ferromagnetic properties and hydrogen evolution rate
A green and efficient molten salt method is reported for the extractive synthesis of intermetallic Co3Fe7, which exhibits outstanding ferromagnetic properties and demonstrates promising performance in hydrogen production within the molten salt.
- 11 March 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (16) , 4320-4329
Water-assisted clean electro-preparation of Co3Fe7 in molten salts: its enhanced ferromagnetic properties and hydrogen evolution rate
A green and efficient molten salt method is reported for the extractive synthesis of intermetallic Co3Fe7, which exhibits outstanding ferromagnetic properties and demonstrates promising performance in hydrogen production within the molten salt.
- 21 June 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (14) , 8348-8359
Steam-assisted electro-reduction of NiO: a sustainable alternative to conventional hydrogen reduction
Conventional methods of hydrogen reduction employed for green nickel production face challenges due to the high potentials required for water splitting at room temperature (>1.8 V) and/or the necessity for expensive catalysts. Additionally, the transportation of hydrogen from the production unit to the reduction unit (generally at 900 °C) presents hazards due to potential hydrogen leakage. Our findings address these challenges by proposing an innovative approach that utilises hydrogen generated via electrolysis at high temperatures for the in situ reduction of NiO in molten salt electrolytes. This process involves the hydrolysis of molten salts, generating protons which are then cathodically discharged to produce hydrogen at a low cell voltage, ranging from 1.0 to 1.4 V. Two different setups are investigated, utilising either NiO cathode pellets or NiO powder immersed in the melt to explore the hydrogen evolution and subsequent reduction of the oxide phase. Various parameters, including cell voltage, cell configuration, electrolyte chemical composition and temperature are examined for their impact on the reduction process. It is observed that the composition of the molten salt electrolyte significantly influences the reduction kinetics. The addition of KCl to LiCl electrolyte aids the reduction process by improving the wettability of electrodes, while CaCl2 enhances the hydrolysis of the molten electrolyte. In particular, NiO pellets demonstrate efficient reduction to Ni in LiCl–30 wt% KCl, achieving a remarkable current efficiency of 97.4% with an energy consumption of 1.28 kW h per kilogram of produced Ni.
- 21 June 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (14) , 8348-8359
Steam-assisted electro-reduction of NiO: a sustainable alternative to conventional hydrogen reduction
Conventional methods of hydrogen reduction employed for green nickel production face challenges due to the high potentials required for water splitting at room temperature (>1.8 V) and/or the necessity for expensive catalysts. Additionally, the transportation of hydrogen from the production unit to the reduction unit (generally at 900 °C) presents hazards due to potential hydrogen leakage. Our findings address these challenges by proposing an innovative approach that utilises hydrogen generated via electrolysis at high temperatures for the in situ reduction of NiO in molten salt electrolytes. This process involves the hydrolysis of molten salts, generating protons which are then cathodically discharged to produce hydrogen at a low cell voltage, ranging from 1.0 to 1.4 V. Two different setups are investigated, utilising either NiO cathode pellets or NiO powder immersed in the melt to explore the hydrogen evolution and subsequent reduction of the oxide phase. Various parameters, including cell voltage, cell configuration, electrolyte chemical composition and temperature are examined for their impact on the reduction process. It is observed that the composition of the molten salt electrolyte significantly influences the reduction kinetics. The addition of KCl to LiCl electrolyte aids the reduction process by improving the wettability of electrodes, while CaCl2 enhances the hydrolysis of the molten electrolyte. In particular, NiO pellets demonstrate efficient reduction to Ni in LiCl–30 wt% KCl, achieving a remarkable current efficiency of 97.4% with an energy consumption of 1.28 kW h per kilogram of produced Ni.
- Open Access
- 1 February 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (2) , 026508
Water-Assisted Green Production of Steel Powder in Molten Salt
We report on the production of hydrogen in molten salt and its in situ utilization for the reduction of ball-milled Fe2O3–Cr2O3–NiO mixed oxides. In this process, the mixed oxides in the form of powders are directly reduced by the hydrogen electro-generated in molten LiCl through the galvanostatic polarization of an iron cathode immersed in the melt at 670 °C, providing an order of magnitude higher extraction rate than those of conventional electrolytic technologies. The reduced powder has a nanostructured morphology consisted of Ni- and Cr-rich Fe nanocrystals, with no detectable intermediate phase. This processing approach is substantially less complicated and more sustainable in comparison with the available methods for scalable production of alloy powders.
- 1 February 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (2) , 026508
Open AccessWater-Assisted Green Production of Steel Powder in Molten Salt
We report on the production of hydrogen in molten salt and its in situ utilization for the reduction of ball-milled Fe2O3–Cr2O3–NiO mixed oxides. In this process, the mixed oxides in the form of powders are directly reduced by the hydrogen electro-generated in molten LiCl through the galvanostatic polarization of an iron cathode immersed in the melt at 670 °C, providing an order of magnitude higher extraction rate than those of conventional electrolytic technologies. The reduced powder has a nanostructured morphology consisted of Ni- and Cr-rich Fe nanocrystals, with no detectable intermediate phase. This processing approach is substantially less complicated and more sustainable in comparison with the available methods for scalable production of alloy powders.
- Open Access
- 24 August 2020
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 1 (7) , 2225-2235
Green production of hydrogen-doped faceted cobalt microcrystals using water-assisted molten salt electro-reduction method
This article concerns the low voltage electro-production of hydrogen in molten salt, and the in situ utilisation of the generated hydrogen for the clean and efficient reduction of cobalt oxide into highly faceted cobalt microcrystals.
- 24 August 2020
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 1 (7) , 2225-2235
Open AccessGreen production of hydrogen-doped faceted cobalt microcrystals using water-assisted molten salt electro-reduction method
This article concerns the low voltage electro-production of hydrogen in molten salt, and the in situ utilisation of the generated hydrogen for the clean and efficient reduction of cobalt oxide into highly faceted cobalt microcrystals.
- 29 November 2018
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 21 (2) , 198-204
Electro-reduction of hematite using water as the redox mediator
Molten salt electrolytic reduction of Fe 2 O 3 in the presence of water is proposed as a sustainable and cost-effective approach for large-scale production of iron.
- 29 November 2018
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 21 (2) , 198-204
Electro-reduction of hematite using water as the redox mediator
Molten salt electrolytic reduction of Fe 2 O 3 in the presence of water is proposed as a sustainable and cost-effective approach for large-scale production of iron.