MWMark E. Wilkinson

Mark E. Wilkinson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mark E. Wilkinson has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    TSA ‐ DOT : A Decision Support Tool for Designing and Optimising Nature‐Based Solutions for Flood Mitigation

    by Martyn T. Roberts, Josie Geris, Paul F. Quinn, Paul D. Hallett, Mark E. Wilkinson

    Nature‐based solutions, such as temporary storage areas (TSAs), are increasingly implemented within natural flood management strategies to mitigate flooding and soil erosion by attenuating surface runoff during storm events. However, guidance on optimising site‐specific TSA designs for runoff attenuation remains limited, and no existing approach comprehensively evaluates TSA effectiveness across multiple flood mitigation metrics. This study addresses these gaps by introducing the TSA Design Optimiser Tool (TSA‐DOT), a decision support tool for designing and optimising TSAs as effective nature‐based solutions for runoff attenuation, contributing to flood mitigation. The tool evaluates TSA performance using five flood mitigation metrics: storage efficiency index, mean retention time, peak flow attenuation, peak flow reduction, and changes in peak flow travel time. It incorporates site‐specific data such as topography and potential storage capacity, soil infiltration rates, and design storm events. Users can prioritise and customise flood mitigation metrics, making the tool suitable for a wide range of catchment settings. When applied at two agricultural TSA sites in northeast Scotland, the tool identified the importance of optimising storage‐to‐drainage relationships for effective runoff attenuation and highlighted the need for increased storage capacity or drainage adjustments under extreme storm events or limited soil infiltration. TSA‐DOT provides practical guidance for using TSAs as part of flood risk management, with integration potential into catchment‐scale hydrological models for scalable, site‐specific applications.

  • Open Access

    Integration of Thermal Infrared Imagery With an In Situ Sensor System Reveals Effects of Thermal Discharge Against Natural Background Variations in Water Temperature

    by Eva Loerke, Mark E. Wilkinson, Ina Pohle, Ronald Daalmans, Stephen Addy, Josie Geris

    Direct and indirect anthropogenic influences, such as water resources management and land use change, can show local and regional effects on stream water temperature, which is increasingly exacerbated by climate change. Characterisation of these influences is important, for example, for assessing and managing aquatic habitats. However, this is often constrained not only by limited overall data availability but more critically by the coarse temporal and spatial resolution of the existing data. Here, we explored the use of a novel low‐cost, in situ 3D temperature sensor system and combined this with traditional stream water temperature loggers and remotely sensed thermal infrared (TIR) data to obtain insights into high‐resolution 3D spatial thermal patterns in river systems at different spatial and temporal scales. We applied this to the River Livet (104 km 2 ) in NE Scotland, which is influenced by the release of cooling‐water (thermal discharge) from a local distillery. We collected stream water temperature data under contrasting ambient conditions and explored the effects of the thermal discharge against the background of natural variability by comparing stream water temperature patterns at times with and without thermal discharge releases. Despite variations in natural background temperatures and flow, and with or without thermal discharge, we consistently observed a general water temperature increase from upstream to downstream along a 900 m reach. This means that the overall pattern in thermal variability in this river was not affected by the release of thermal discharge. However, results from this first multi‐method application in a complex river system also showed that a warm thermal plume related to the underwater release of thermal discharge obscured the natural thermal variability locally (across 30 m). These effects could be detected at the air‐water interface. The magnitude of these effects also appeared to depend on background conditions, with the largest noticeable impacts observed during relatively low flow (1.5 m 3 /s), with cold background air (1.7°C) and stream water temperatures (4.4°C). Our approach has enabled us to identify small‐scale thermal patterns in an anthropogenic‐influenced river. In the future, this approach could be used to determine thermal patterns in 3D in various natural and anthropogenically influenced hydrological environments.


  • Open Access

    Spatial and Temporal Variations in Arable Soil Structure and Hydrology Affect the Functioning of Nature‐Based Solutions for Flood Mitigation

    by Martyn T. Roberts, Mark E. Wilkinson, Josie Geris, Paul D. Hallett

    Temporary storage areas (TSAs) are nature‐based solutions designed to mitigate flooding and soil erosion by creating dispersed catchment‐based storage to attenuate surface runoff during storm events. While the uptake of TSAs is increasing, their hydrological function can vary over time. To better understand the factors influencing time‐variable TSA functioning, this study investigated how TSA soil physical and hydraulic properties respond to temporal events such as land management practices and flooding, and how these responses vary spatially across land uses and within TSA footprints. For two typical TSAs on arable land in NE Scotland, we monitored rainfall, TSA water levels and soil moisture over 2 years. Bulk density, macroporosity and saturated hydraulic conductivity were measured on 6 to 7 occasions within TSA footprints and adjacent contributing areas. Soil structural degradation following flood inundation and minor sedimentation was most pronounced within the TSA footprint, particularly in bare arable soils. Soil structural changes varied spatially across field management zones and between intermittently flooded and non‐flooded areas. They also differed temporally in response to seasonal conditions and tillage. For example, macroporosity decreased from 0.16 m 3 m −3 post‐tillage to 0.07 m 3 m −3 post‐winter and saturated hydraulic conductivity was lower in TSA soils (6.1e −5 ± 1.6e −4 m s −1 ) compared to contributing areas (1.8e −4 ± 1.3e −4 m s −1 ) post‐flood. Tillage temporarily improved topsoil structure and hydraulic properties but increased vulnerability to slumping and erosion when poorly timed relative to flooding. In contrast, vegetated TSA soils maintained more favourable physical and hydraulic properties post‐flood, indicating greater resilience. Although downstream flood impacts were not quantified, the results improve understanding of the dynamic soil and hydrological processes that influence TSA functioning over time. Reduced infiltration capacity due to soil structural degradation may limit available surface water storage within TSAs, affecting their ability to attenuate surface runoff during storm events. Recognising these spatial and temporal changes can inform management strategies that help maintain or enhance TSA hydrological functioning for effective surface runoff attenuation.


  • Open Access

    Mitigating floods and attenuating surface runoff with temporary storage areas in headwaters

    by Martyn T. Roberts, Josie Geris, Paul D. Hallett, Mark E. Wilkinson

    Temporary storage areas (TSAs) represent a category of soft‐engineered nature‐based solutions that can provide dispersed, small‐scale storage throughout a catchment. TSAs store and attenuate surface runoff, providing new additional storage during flood events. The need for such additional catchment storage will become more urgent as the frequency and magnitude of extreme hydrological events increases due to climate change. Implementation of TSAs in headwater catchments is slowly gaining momentum, but practitioners still require further evidence on how such measures function during flood events. This review focuses on the role of relatively small‐scale (3) TSAs in headwater catchments for flood risk management. It also explores the potential wider benefits for implementing these as part of an integrated catchment management approach. TSA flood mitigation effectiveness is primarily determined by the TSA's available storage prior to the event. At the local scale, this can be represented by the relationship between TSA inputs, outputs and total storage. Factors influencing the local functioning and effectiveness of TSAs are discussed, with potential considerations for optimizing future TSA design and management. Hydrological models have suggested that TSAs could be used to effectively attenuate high magnitude events. However, future considerations should involve addressing the lack of empirical evidence showing TSA catchment scale effectiveness and how local TSA functioning might change in time. Small‐scale headwater TSAs offer a holistic and sustainable approach to catchment management that can deliver both local benefits to landowners and wider flood risk mitigation for society.This article is categorized under: Engineering Water > Sustainable Engineering of Water Science of Water > Water Extremes Science of Water > Hydrological Processes


  • Open Access

    The Role of Runoff Attenuation Features (RAFs) in Natural Flood Management

    by Paul Francis Quinn, Caspar J. M. Hewett, Mark E. Wilkinson, Russell Adams

    Natural Flood Management (NFM) and catchment-based solutions for flood risk management and environmental problems are wide-ranging and complex. Management of fluvial flood risk in the UK is undergoing a fundamental shift, with a change in emphasis from solely working with structural defences to considering catchment-based measures which attenuate flood runoff. At the heart of this change are NFM and nature-based solutions. One key type of intervention is the Runoff Attenuation Feature (RAF): a class of features that targets runoff flow pathways and creates new temporary flow storage (such as ponds and leaky barriers). However, there is currently a lack of evidence for the effectiveness of NFM and RAFs at larger catchment scales and for managing extreme flood events. Nevertheless, there is a strong evidence base to suggest that well-designed RAFs deliver a range of ecosystem services if installed in the correct location. This paper reviews and critiques the role of RAFs and NFM as an interventionist and holistic approach to lowering runoff rates. The link between RAF design types and their relationship to land use and scale is made. Recent novel innovations and attempts to scale up RAFs are discussed. The role of antecedent conditions, groundwater and the change in residence time of processes is highlighted. The uncertainty and complexity of proving NFM effectiveness underpin a view that new thinking in catchment flood management is needed. New research is required, and many questions are raised about RAFs and NFM. The direction of travel is that a positive and proactive NFM community can now embrace the problem. Proof that RAFs and NFM can address flood management is not likely to be resolved without a great deal of further research but confidence that RAFs do beneficial work is growing and an argument for greater amounts of runoff attenuation is made.


  • Open Access

    Assessing the role of location and scale of Nature Based Solutions for the enhancement of low flows

    by Jessica Fennell, Chris Soulsby, Mark E. Wilkinson, Ronald Daalmans, Josie Geris

    Water resources management during drought is a significant challenge worldwide, particularly for upland areas. Additionally, variations in water availability are becoming more extreme with climate change. Nature Based Solutions (NBS) e.g. Runoff Attenuation Features (RAFs) could provide an alternative to hard-engineering. Using more natural processes, flow pathways are intercepted and attenuated in features during wet periods, increasing infiltration opportunity and thus water availability for use later. NBS research has primarily focused on flood mitigation, but little is known about low flow impacts; knowledge is required on where and at what scale to implement NBS. To explore these questions, we used a physically-based catchment model (MIKE SHE) integrated with a hydraulic river model (MIKE 11) to evaluate scenarios with varying RAF volumes and locations. We applied this to an intensively monitored upland Scottish catchment (0.9 km2) where 40 RAFs (∼2m3 storage each) were installed for low flow enhancement. Model results showed installed RAFs increase recharge (∼0.1%), groundwater contribution to streamflow (∼4%) and low flows (∼1%) and reduce high (∼5%) and mean flows (∼2%), suggesting RAFs could be used to mitigate extreme flows. The scenarios revealed that RAF location (primarily soil type) and scale (total storage volume and spread of features) were both important. Doubling installed RAF volumes increased impact on low flows by ∼25% and high flows by ∼40%, although lower additional benefits were predicted with further storage increases. RAFs had greater impact in freely-draining soils than poorly-draining, however distributing the same storage volume across many smaller RAFs over greater areas (both soil types) provided the largest effect. Absolute changes observed were relatively small, and given model uncertainty, should be treated with caution. Nevertheless, the direction of change was clear and given ecological systems and water supply rely on small margins of change, even slight increases in low flows will likely be beneficial.


  • Open Access

    Stormwater Detention Ponds in Urban Catchments—Analysis and Validation of Performance of Ponds in the Ouseburn Catchment, Newcastle upon Tyne, UK

    by Stephen J. Birkinshaw, Chris Kilsby, Greg O’donnell, Paul Quinn, Russell Adams, Mark E. Wilkinson

    The impact of stormwater drainage and detention ponds on flooding is assessed using statistical analysis and physically based computer simulation of a 45-year case study for a peri-urban catchment. In 1978, the 54 km2 Ouseburn catchment in Newcastle upon Tyne was impacted by the connection of a new 2.1 km2 residential development, directly to the Ouseburn River, via a stormwater drain, which reduced the time to peak and increased flood risk. Further residential developments of 1.6 km2 have been built since 2004, again with separated sewer systems, but this time linked to stormwater detention ponds before draining into the Ouseburn River. Detailed analysis of the data, confirmed with computer simulation, shows that in contrast with the 1978 intervention, these new developments had only a minimal effect on the flows in the Ouseburn River, in fact achieving a small reduction in peak flows for large events. This study assesses the post-construction efficiency of such systems, and we show that the stormwater detention ponds are working as designed.


  • Open Access

    Lessons from the 2018 drought for management of local water supplies in upland areas: A tracer‐based assessment

    by Jessica Fennell, Josie Geris, Mark E. Wilkinson, Ronald Daalmans, Chris Soulsby

    Climate change, combined with industrial growth and increasing demand, could result in serious future water shortages and related water quality and temperature issues, especially for upland and humid areas. The extreme 2018 drought that prevailed throughout Europe provided an opportunity to investigate conditions likely to become more frequent in the future. For an upland rural catchment utilised by the distilling industry in North‐East Scotland, a tracer‐based survey combined discharge, electrical conductivity, stable water isotopes and temperature measurements to understand the impacts of drought on dominant stream water and industry water sources, both in terms of water quantity and quality (temperature). Results showed that water types (groundwater, ephemeral stream water, perennial stream water and water from small dams) were spatially distinct and varied more in space than time. With regards to the drought conditions we found that streams were largely maintained by groundwater during low flows. This also buffered stream water temperatures. Water types with high young water fractions were less resilient, resulting in streams with an ephemeral nature. Although our results demonstrated the importance of groundwater for drought resilience, water balance data revealed these storage reserves were being depleted and only recovered towards the end of the following year because of above average rainfall in 2019. Increased storage depletion under continued trends of extreme drought and water abstraction could be addressed via informed (nature based) management strategies which focus on increasing recharge. This may improve resilience to droughts as well as floods, but site specific testing and modelling are required to understand their potential. Results could have implications for management of water volumes and temperature, particularly for the sustainability of an historic industry, balancing requirements of rural communities and the environment.


  • Open Access

    Representing natural and artificial in‐channel large wood in numerical hydraulic and hydrological models

    by Stephen Addy, Mark E. Wilkinson

    The influence of naturally occurring in‐channel large wood (LW) on the hydraulics, hydrology and geomorphology of rivers is well documented. To inform management and better understand naturally occurring or artificially placed LW, hydraulic and hydrological models are applied to predict the possible benefits and drawbacks for habitat, sediment management and flood risk mitigation. However, knowledge and guidance on appropriate representation in models, needed to underpin realistic predictions, is lacking. This could lead to unrealistic expectations of the effectiveness of LW for different river management goals. To date, seven types of LW representation in hydraulic and hydrological models have been applied, the range partly reflecting the variety of LW, model types, scales and purposes. The most common approach is by altering channel roughness to represent flow resistance. Although qualitatively the effects of LW have been captured using models, to date quantitative validation, as well as transferable knowledge to help a priori parameterization of LW representations, remain limited. Therefore, additional empirical investigations and robust model validation are required to inform defensible LW representations for specific purposes and scales in numerical models coupled with better accounting of input uncertainty to improve confidence in predictions. Future studies should also consider a greater range of artificial and natural LW features, settings, larger spatial scales and better account for temporal variability of flow, morphology and LW configuration.This article is categorized under: Water and Life > Methods Science of Water > Methods Water and Life > Nature of Freshwater Ecosystems


  • Open Access

    Structure from motion photogrammetry in ecology: Does the choice of software matter?

    by Joel Forsmoo, Karen Anderson, Christopher J. A. Macleod, Mark E. Wilkinson, Leon DeBell, Richard E. Brazier

    Image‐based modeling, and more precisely, Structure from Motion (SfM) and Multi‐View Stereo (MVS), is emerging as a flexible, self‐service, remote sensing tool for generating fine‐grained digital surface models (DSMs) in the Earth sciences and ecology. However, drone‐based SfM + MVS applications have developed at a rapid pace over the past decade and there are now many software options available for data processing. Consequently, understanding of reproducibility issues caused by variations in software choice and their influence on data quality is relatively poorly understood. This understanding is crucial for the development of SfM + MVS if it is to fulfill a role as a new quantitative remote sensing tool to inform management frameworks and species conservation schemes. To address this knowledge gap, a lightweight multirotor drone carrying a Ricoh GR II consumer‐grade camera was used to capture replicate, centimeter‐resolution image datasets of a temperate, intensively managed grassland ecosystem. These data allowed the exploration of method reproducibility and the impact of SfM + MVS software choice on derived vegetation canopy height measurement accuracy. The quality of DSM height measurements derived from four different, yet widely used SfM‐MVS software—Photoscan, Pix4D, 3DFlow Zephyr, and MICMAC, was compared with in situ data captured on the same day as image capture. We used both traditional agronomic techniques for measuring sward height, and a high accuracy and precision differential GPS survey to generate independent measurements of the underlying ground surface elevation. Using the same replicate image dataset (n = 3) as input, we demonstrate that there are 1.7, 2.0, and 2.5 cm differences in RMSE (excluding one outlier) between the outputs from different SfM + MVS software using High, Medium, and Low quality settings, respectively. Furthermore, we show that there can be a significant difference, although of small overall magnitude between replicate image datasets (n = 3) processed using the same SfM + MVS software, following the same workflow, with a variance in RMSE of up to 1.3, 1.5, and 2.7 cm (excluding one outlier) for “High,” “Medium,” and “Low” quality settings, respectively. We conclude that SfM + MVS software choice does matter, although the differences between products processed using “High” and “Medium” quality settings are of small overall magnitude.