SNStefan Nevlacsil

Stefan Nevlacsil

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Stefan Nevlacsil has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Top Cited Papers
    Open Access

    Toward optical coherence tomography on a chip: in vivo three-dimensional human retinal imaging using photonic integrated circuit-based arrayed waveguide gratings

    by Elisabet A. Rank, Ryan Sentosa, Danielle J. Harper, Matthias Salas, Anna Gaugutz, Dana Seyringer, Stefan Nevlacsil, Alejandro Maese-Novo, Moritz Eggeling, Paul Muellner, et al.

    In this work, we present a significant step toward in vivo ophthalmic optical coherence tomography and angiography on a photonic integrated chip. The diffraction gratings used in spectral-domain optical coherence tomography can be replaced by photonic integrated circuits comprising an arrayed waveguide grating. Two arrayed waveguide grating designs with 256 channels were tested, which enabled the first chip-based optical coherence tomography and angiography in vivo three-dimensional human retinal measurements. Design 1 supports a bandwidth of 22 nm, with which a sensitivity of up to 91 dB (830 µW) and an axial resolution of 10.7 µm was measured. Design 2 supports a bandwidth of 48 nm, with which a sensitivity of 90 dB (480 µW) and an axial resolution of 6.5 µm was measured. The silicon nitride-based integrated optical waveguides were fabricated with a fully CMOS-compatible process, which allows their monolithic co-integration on top of an optoelectronic silicon chip. As a benchmark for chip-based optical coherence tomography, tomograms generated by a commercially available clinical spectral-domain optical coherence tomography system were compared to those acquired with on-chip gratings. The similarities in the tomograms demonstrate the significant clinical potential for further integration of optical coherence tomography on a chip system.


  • Open Access

    Multi-channel swept source optical coherence tomography concept based on photonic integrated circuits

    by Stefan Nevlacsil, Paul Muellner, Alejandro Maese-Novo, Moritz Eggeling, Florian Vogelbacher, Martin Sagmeister, Jochen Kraft, Elisabet Rank, Wolfgang Drexler, Rainer Hainberger

    In this paper, we present a novel concept for a multi-channel swept source optical coherence tomography (OCT) system based on photonic integrated circuits (PICs). At the core of this concept is a low-loss polarization dependent path routing approach allowing for lower excess loss compared to previously shown PIC-based OCT systems, facilitating a parallelization of measurement units. As a proof of concept for the low-loss path routing, a silicon nitride PIC-based single-channel swept source OCT system operating at 840 nm was implemented and used to acquire in-vivo tomograms of a human retina. The fabrication of the PIC was done via CMOS-compatible plasma-enhanced chemical vapor deposition to allow future monolithic co-integration with photodiodes and read-out electronics. A performance analysis using the results of the implemented photonic building blocks shows a potential tenfold increase of the acquisition speed for a multi-channel system compared to an ideal lossless single-channel system with the same signal-to-noise ratio.

  • Multi-channel swept source optical coherence tomography concept based on photonic integrated circuits

    by Stefan Nevlacsil, Paul Muellner, Alejandro Maese-Novo, Moritz Eggeling, Florian Vogelbacher, Martin Sagmeister, Jochen Kraft, Elisabet Rank, Wolfgang Drexler, Rainer Hainberger

    In this paper, we present a novel concept for a multi-channel swept source optical coherence tomography (OCT) system based on photonic integrated circuits (PICs). At the core of this concept is a low-loss polarization dependent path routing approach allowing for lower excess loss compared to previously shown PIC-based OCT systems, facilitating a parallelization of measurement units. As a proof of concept for the low-loss path routing, a silicon nitride PIC-based single-channel swept source OCT system operating at 840 nm was implemented and used to acquire in-vivo tomograms of a human retina. The fabrication of the PIC was done via CMOS-compatible plasma-enhanced chemical vapor deposition to allow future monolithic co-integration with photodiodes and read-out electronics. A performance analysis using the results of the implemented photonic building blocks shows a potential tenfold increase of the acquisition speed for a multi-channel system compared to an ideal lossless single-channel system with the same signal-to-noise ratio.


  • Open Access

    Broadband low loss and ultra-low crosstalk waveguide crossings based on multimode interferometer for 840 nm operation

    by Stefan Nevlacsil, Paul Muellner, Martin Sagmeister, Jochen Kraft, Rainer Hainberger

    Broadband low loss and ultra-low crosstalk waveguide crossings are a crucial component for photonic integrated circuits to allow a higher integration density of functional components and an increased flexibility in the layout. We report the design of optimized silicon nitride waveguide crossings based on multimode interferometer structures for intersecting light paths of TE/TE-like, TM/TM-like and TE/TM-like polarized light in the near infrared wavelength region of 790 nm to 890 nm. The crossing design for diverse polarization modes facilitates dual polarization operation on a single chip. For all configurations the loss of a single crossing was measured to be 0.05 dB at 840 nm. Within the 100 nm bandwidth losses stayed below 0.16 dB. The crosstalk was estimated to be on the order of -60 dB by means of 3D finite difference time domain simulations.

  • CMOS-compatible silicon nitride waveguide photonic building blocks and their application for optical coherence tomography and other sensing applications

    by Rainer Hainberger, Paul Muellner, Moritz Eggeling, Alejandro Maese-Novo, Stefan Nevlacsil, Jörg Schotter, Florian Vogelbacher, Jochen Kraft, Martin Sagmeister, Xue Zhou, et al.

    In this paper, we report our recent advances in the development of CMOS compatible PECVD silicon nitride waveguide based photonic key building blocks for optical coherence tomography (OCT) in the 850 nm wavelength region and for biosensing applications in the visible domain around 650 nm wavelength. We discuss the design and experimental verification of compact low-loss waveguide bends, broadband couplers with varying power splitting ratios required for PIC based OCT systems, arrayed waveguide gratings for spectral domain OCT, and a monolithically integrated optically pumped organic solid-state laser for low-cost biosensing applications.


  • Broadband low loss and ultra-low crosstalk waveguide crossings based on a multimode interferometer for 840 nm operation

    by Stefan Nevlacsil, Paul Muellner, Martin Sagmeister, Jochen Kraft, Rainer Hainberger

    Broadband low loss and ultra-low crosstalk waveguide crossings are a crucial component for photonic integrated circuits to allow a higher integration density of functional components and an increased flexibility in the layout. We report the design of optimized silicon nitride waveguide crossings based on multimode interferometer structures for intersecting light paths of TE/TE-like, TM/TM-like, and TE/TM-like polarized light in the near infrared wavelength region of 790 nm to 890 nm. The crossing design for diverse polarization modes facilitates dual polarization operation on a single chip. For all configurations the loss of a single crossing was measured to be ~0.05 dB at 840 nm. Within the 100 nm bandwidth losses stayed below 0.16 dB. The crosstalk was estimated to be on the order of −60 dB by means of 3D finite difference time domain simulations.


  • Analysis of silicon nitride partial Euler waveguide bends

    by Florian Vogelbacher, Stefan Nevlacsil, Martin Sagmeister, Jochen Kraft, Karl Unterrainer, Rainer Hainberger

    In this work, we present a detailed analysis of individual loss mechanisms in silicon nitride partial Euler bends at a wavelength of 850 nm. This structure optimizes the transmission through small radii optical waveguide bends. The partial Euler bend geometry balances losses arising from the transition from the straight to the bend waveguide mode and radiative losses of the bend waveguide mode. Numerical analyses are presented for 45-degree bends commonly employed in S-bend configurations to create lateral offsets, as well as 90- and 180-degree bends. Additionally, 90-degree partial Euler bends were fabricated on a silicon nitride photonic platform to experimentally complement the theoretical findings. The optimized waveguide bends allow for a reduced effective radius without increasing the total bend loss and, thus, enable a higher component density in photonic integrated circuits.


  • Spectral domain and swept source optical coherence tomography on a photonic integrated circuit at 840nm for ophthalmic application

    by Elisabet A. Rank, Stefan Nevlacsil, Paul Muellner, Rainer Hainberger, Alejandro Maese-Novo, Marcus Duelk, Stefan Gloor, Matthias Voelker, Nanko Verwaal, Gerald Meinhardt, et al.


  • PECVD silicon nitride optical waveguide devices for sensing applications in the visible and <1µm near infrared wavelength region

    by Rainer Hainberger, Paul Muellner, Stefan Nevlacsil, Florian Vogelbacher, Moritz Eggeling, Alejandro Maese-Novo, Martin Sagmeister, Guenther Koppitsch, Jochen Kraft, Xue Zhou, et al.

    We report several PECVD silicon nitride photonic building blocks required for the implementation of a CMOS-compatible photonic integrated circuit technology platform operating in the 850 nm and 600 nm wavelength domain. In particular, for the 850 nm wavelength region we discuss a low-loss broadband 1x2 power splitter and a loop mirror. In the 600 nm wavelength region, we present new results on an optically pumped integrated dye-doped polymer laser that couples its light directly into a silicon nitride waveguide. Moreover, we discuss design considerations for a waveguide based gas sensing concept detecting target gas specific absorption changes in a thin dye-doped polymer cladding layer.


  • Open Access

    Broadband SiN asymmetric directional coupler for 840 nm operation

    by Stefan Nevlacsil, Moritz Eggeling, Paul Muellner, Guenther Koppitsch, Martin Sagmeister, Jochen Kraft, Rainer Hainberger

    Silicon nitride based photonic integrated circuits offer a wavelength operation window in the near infrared down to visible light, which makes them attractive for life science applications. However, they exhibit significantly different behavior in comparison with better-established silicon on insulator counterparts due to the lower index contrast. Among the most important building blocks in photonic integrated circuits are broadband couplers with a defined coupling ratio. We present silicon nitride broadband asymmetric directional coupler designs with 50/50 and 90/10 splitting ratios with a central wavelength of 840 nm for both TE- and TM-like polarization. We show that silicon nitride broadband asymmetric directional couplers can be designed accurately in a time efficient way by using a general implementation of the coupled mode theory. The accuracy of the coupled mode theory approach is validated with finite difference time domain simulations and confirmed with measurements of four coupler configurations.