Yufeng Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yufeng Wang has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Hui Zhou
National Key Laboratory of Petroleum Resources and Engineering, CNPC Key Laboratory of Geophysical Exploration, China University of Petroleum (Beijing), Beijing, China
11 shared publications - Yangkang Chen
Bureau of Economic Geology The University of Texas at Austin Austin TX USA
6 shared publications - Hanming Chen
China University of Petroleum (Beijing)
5 shared publications - Yuanpeng Zhang
Institute of Geophysical and Geochemical Exploration (IGGE), Chinese Academy of Geological Sciences, Langfang, China
5 shared publications Yangkang Chen
School of Earth Sciences, Zhejiang University, Hangzhou, Zhejiang Province 310027, China
4 shared publications- Xiangyun Hu
School of Geophysics and Geomatics, China University of Geosciences (Wuhan), Wuhan, China
3 shared publications
Latest Publications
- 24 June 2026
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 91 (4) , M91-M103
Total variation-regularized poststack seismic impedance inversion based on the L 1–2 norm
Seismic impedance inversion is a key approach for oil and gas reservoir prediction, and the quality of inversion results directly affects the accuracy of reservoir identification and quantitative interpretation. Given that the stratigraphic impedance usually has blocky characteristics, total variation (TV) regularization with edge-preserving properties has shown excellent performance in seismic impedance inversion. However, the limited ability of TV regularization to sparsely represent the signal and its tendency to produce staircase artifacts during the inversion process lead to poor accuracy of the impedance inversion result in depicting the geologic structure boundaries. To enhance the accuracy and reliability of the inversion result, a TV regularization based on the L1–2 norm was developed, which provides a more sparse inversion result and is less prone to staircase artifacts than the conventional TV constraint when applied to poststack seismic impedance inversion. The objective function of the proposed method can be solved efficiently by the difference of convex algorithm and split-Bregman iterative algorithm. Synthetic and real data tests confirmed that the method can improve the resolution of the inverted impedance while mitigating the staircase artifacts, thereby realizing the fine depiction of reservoir characteristics, which indicates that it has a broad application prospect.
- 24 June 2026
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 91 (4) , M91-M103
Total variation-regularized poststack seismic impedance inversion based on the L 1–2 norm
Seismic impedance inversion is a key approach for oil and gas reservoir prediction, and the quality of inversion results directly affects the accuracy of reservoir identification and quantitative interpretation. Given that the stratigraphic impedance usually has blocky characteristics, total variation (TV) regularization with edge-preserving properties has shown excellent performance in seismic impedance inversion. However, the limited ability of TV regularization to sparsely represent the signal and its tendency to produce staircase artifacts during the inversion process lead to poor accuracy of the impedance inversion result in depicting the geologic structure boundaries. To enhance the accuracy and reliability of the inversion result, a TV regularization based on the L1–2 norm was developed, which provides a more sparse inversion result and is less prone to staircase artifacts than the conventional TV constraint when applied to poststack seismic impedance inversion. The objective function of the proposed method can be solved efficiently by the difference of convex algorithm and split-Bregman iterative algorithm. Synthetic and real data tests confirmed that the method can improve the resolution of the inverted impedance while mitigating the staircase artifacts, thereby realizing the fine depiction of reservoir characteristics, which indicates that it has a broad application prospect.
- 26 February 2026
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 91 (2) , R65-R80
Multiscale neural decoding and weighting for reparameterized seismic full-waveform inversion
Seismic full-waveform inversion (FWI) stands as a cornerstone technique in subsurface imaging, offering unparalleled insights into subsurface structures. However, conventional FWI methods often face challenges related to nonlinearity and ill-posedness, particularly in handling inaccurate initial models and uncertainty of observations. To address these issues, a novel approach termed multiscale neural decoding and weighting for seismic FWI (MNDW-FWI) was proposed. Our method leverages a multiscale decoding neural network to effectively reparameterize velocity models and capture diverse scales of subsurface features. Furthermore, a flexible weighting mechanism was introduced to assign distinct weights to individual branches of the decoder networks, thereby enabling tailored emphasis on different scales of the velocity models. The integration of these advancements into a recurrent neural network-based FWI (RNN-FWI) framework yields significant improvements in accuracy and robustness. By incorporating the MNDW strategy and automatic differentiation (AD) technique, our approach offers superior performance in capturing intricate subsurface structures from an inaccurate initial model and mitigating the effects of the presence of noise and the absence of low-frequency components in seismic records. Through comprehensive experimental evaluations on synthetic examples with noisy and limited bandwidth observations, the efficacy of our proposed method in enhancing the accuracy and flexibility of inversion was demonstrated.
- 26 February 2026
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 91 (2) , R65-R80
Multiscale neural decoding and weighting for reparameterized seismic full-waveform inversion
Seismic full-waveform inversion (FWI) stands as a cornerstone technique in subsurface imaging, offering unparalleled insights into subsurface structures. However, conventional FWI methods often face challenges related to nonlinearity and ill-posedness, particularly in handling inaccurate initial models and uncertainty of observations. To address these issues, a novel approach termed multiscale neural decoding and weighting for seismic FWI (MNDW-FWI) was proposed. Our method leverages a multiscale decoding neural network to effectively reparameterize velocity models and capture diverse scales of subsurface features. Furthermore, a flexible weighting mechanism was introduced to assign distinct weights to individual branches of the decoder networks, thereby enabling tailored emphasis on different scales of the velocity models. The integration of these advancements into a recurrent neural network-based FWI (RNN-FWI) framework yields significant improvements in accuracy and robustness. By incorporating the MNDW strategy and automatic differentiation (AD) technique, our approach offers superior performance in capturing intricate subsurface structures from an inaccurate initial model and mitigating the effects of the presence of noise and the absence of low-frequency components in seismic records. Through comprehensive experimental evaluations on synthetic examples with noisy and limited bandwidth observations, the efficacy of our proposed method in enhancing the accuracy and flexibility of inversion was demonstrated.
- 7 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-11
Transfer Learning Fourier Neural Operator for Solving Parametric Frequency-Domain Wave Equations
Fourier neural operator (FNO) is a recently proposed data-driven scheme to approximate the implicit operators characterized by partial differential equations (PDEs) between functional spaces. The infinite-dimensional functional mapping from the parameter space to the state variable space enables us to solve parametric PDEs efficiently. To explore the potential of neural operator learning in geophysics exploration, we devise a transfer learning approach with the fine-tuning FNO backbone, termed transfer learning FNO (TL-FNO), to gain good generalization ability in solving frequency-domain wave equations at multiple source locations and frequencies. The baseline FNO model is initially trained at a single source location and frequency and then shared with the downstream tasks for seamlessly predicting the frequency-domain wavefields at different sources and frequencies. We conduct an in-depth analysis of the behavior of TL-FNO in diverse training settings, exploring dimensions such as data scale, training scale, and fine-tuning recipes. Our focus extends to understanding the scaling and transfer learning dynamics, as well as the generalization performance in out-of-distribution (OOD) scenarios. This comprehensive study aims to unveil the intricate relationships between these factors and the efficacy of TL-FNO across a range of conditions. Numerical examples demonstrate the notable superiority of the proposed TL-FNO over vanilla FNO in terms of accuracy and efficiency. We anticipate that the proposed TL-FNO is expected to be an efficient surrogate model to accelerate forward simulations in parametric wave equation inversion problems.
- 7 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-11
Transfer Learning Fourier Neural Operator for Solving Parametric Frequency-Domain Wave Equations
Fourier neural operator (FNO) is a recently proposed data-driven scheme to approximate the implicit operators characterized by partial differential equations (PDEs) between functional spaces. The infinite-dimensional functional mapping from the parameter space to the state variable space enables us to solve parametric PDEs efficiently. To explore the potential of neural operator learning in geophysics exploration, we devise a transfer learning approach with the fine-tuning FNO backbone, termed transfer learning FNO (TL-FNO), to gain good generalization ability in solving frequency-domain wave equations at multiple source locations and frequencies. The baseline FNO model is initially trained at a single source location and frequency and then shared with the downstream tasks for seamlessly predicting the frequency-domain wavefields at different sources and frequencies. We conduct an in-depth analysis of the behavior of TL-FNO in diverse training settings, exploring dimensions such as data scale, training scale, and fine-tuning recipes. Our focus extends to understanding the scaling and transfer learning dynamics, as well as the generalization performance in out-of-distribution (OOD) scenarios. This comprehensive study aims to unveil the intricate relationships between these factors and the efficacy of TL-FNO across a range of conditions. Numerical examples demonstrate the notable superiority of the proposed TL-FNO over vanilla FNO in terms of accuracy and efficiency. We anticipate that the proposed TL-FNO is expected to be an efficient surrogate model to accelerate forward simulations in parametric wave equation inversion problems.
- 31 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-10
Structurally Constrained Initial Impedance Modeling for Poststack Seismic Inversion
The establishment of initial subsurface model is a crucial step for seismic inversion. An accurate and reasonable initial model can mitigate the ill-posedness of seismic inversion and improve the quality of inversion result. A common method for building initial model is the well-log data interpolation. However, the traditional well-log interpolation method ignores the structural information of the subsurface, resulting in the constructed initial model lacking geological meaning. We propose a novel structurally constrained modeling method (SCMM) to obtain a geologically reasonable initial impedance model for poststack seismic inversion. Well-log interpolation can be represented as an inverse problem. SCMM constrains the inversion process by using a regularization operator that forces the well-log data to be extended to the entire seismic working area along the subsurface local structural direction. First, we calculate the seismic dip from the poststack seismic profile. Then, we design the structural operator based on the estimated seismic dip information to constrain the interpolation process. Under the framework of inversion, the interpolation objective function can be established by combining the structural operator with the well-log data misfit term, and it can be solved efficiently by the conjugate gradient algorithm. Synthetic and field data tests show that the initial model built by SCMM is more consistent with the geological rules than that built by traditional method, and the poststack impedance inversion using SCMM is better than that using traditional modeling method in terms of convergence property and accuracy of inversion result.
- 31 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-10
Structurally Constrained Initial Impedance Modeling for Poststack Seismic Inversion
The establishment of initial subsurface model is a crucial step for seismic inversion. An accurate and reasonable initial model can mitigate the ill-posedness of seismic inversion and improve the quality of inversion result. A common method for building initial model is the well-log data interpolation. However, the traditional well-log interpolation method ignores the structural information of the subsurface, resulting in the constructed initial model lacking geological meaning. We propose a novel structurally constrained modeling method (SCMM) to obtain a geologically reasonable initial impedance model for poststack seismic inversion. Well-log interpolation can be represented as an inverse problem. SCMM constrains the inversion process by using a regularization operator that forces the well-log data to be extended to the entire seismic working area along the subsurface local structural direction. First, we calculate the seismic dip from the poststack seismic profile. Then, we design the structural operator based on the estimated seismic dip information to constrain the interpolation process. Under the framework of inversion, the interpolation objective function can be established by combining the structural operator with the well-log data misfit term, and it can be solved efficiently by the conjugate gradient algorithm. Synthetic and field data tests show that the initial model built by SCMM is more consistent with the geological rules than that built by traditional method, and the poststack impedance inversion using SCMM is better than that using traditional modeling method in terms of convergence property and accuracy of inversion result.
- 2 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-9
Structure-Guided L1-2 Minimization for Stable Multichannel Seismic Attenuation Compensation
Absorption in subsurface media severely degrades seismic data quality. Seismic attenuation compensation as an important processing method can effectively improve the resolution and fidelity of seismic data. Based on sparse reflectivity model and attenuated convolution function, inversion-based compensation approaches show better stability and accuracy over traditional direct compensation schemes. However, conventional inversion-based compensation methods are conducted on single trace, which ignore the subsurface spatial continuity and make the compensated result contaminated with high-frequency noise. In this paper, we develop a structurally constrained multichannel L1-2 minimization for seismic attenuation compensation. We first estimate structure tensors from migrated seismic images. The structure tensors can be decomposed by eigenvalues and eigenvectors, which can reflect the structural orientations. Then, we introduce the estimated orientations as a regularization term to the L1-2 inversion-based compensation objective function. In this way, we can improve the stability of the compensation result and enhance the spatial continuity of the compensated seismic reflectors. The structure-guided L1-2 regularized compensation objective function can be efficiently solved via difference of convex algorithm and alternating direction method of multipliers. Synthetic and field data examples demonstrate that the proposed method possesses superior performance over conventional L1-2 regularized inversion-based compensation.
- 2 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-9
Structure-Guided L1-2 Minimization for Stable Multichannel Seismic Attenuation Compensation
Absorption in subsurface media severely degrades seismic data quality. Seismic attenuation compensation as an important processing method can effectively improve the resolution and fidelity of seismic data. Based on sparse reflectivity model and attenuated convolution function, inversion-based compensation approaches show better stability and accuracy over traditional direct compensation schemes. However, conventional inversion-based compensation methods are conducted on single trace, which ignore the subsurface spatial continuity and make the compensated result contaminated with high-frequency noise. In this paper, we develop a structurally constrained multichannel L1-2 minimization for seismic attenuation compensation. We first estimate structure tensors from migrated seismic images. The structure tensors can be decomposed by eigenvalues and eigenvectors, which can reflect the structural orientations. Then, we introduce the estimated orientations as a regularization term to the L1-2 inversion-based compensation objective function. In this way, we can improve the stability of the compensation result and enhance the spatial continuity of the compensated seismic reflectors. The structure-guided L1-2 regularized compensation objective function can be efficiently solved via difference of convex algorithm and alternating direction method of multipliers. Synthetic and field data examples demonstrate that the proposed method possesses superior performance over conventional L1-2 regularized inversion-based compensation.
- 20 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-11
Crosswell Seismic Imaging Using Q-Compensated Viscoelastic Reverse Time Migration With Explicit Stabilization
The increasing complexity of seismic exploration projects and the request for higher imaging resolution have driven the geophysics community to look for a sound understanding of the subsurface formation to optimize seismic structure interpretation and reservoir characterization. Crosswell seismic survey aims at obtaining higher resolution images of the interwell regions and more accurately characterizing the reservoir dynamics. However, the presence of the intrinsic seismic attenuation of rocks as seismic waves propagate through the subsurface results in amplitude decay and velocity dispersion. This inevitably decreases the imaging resolution and the reliability of the subsequent seismic interpretation and reservoir characterization. To compensate for the attenuating effect, one may restore to attenuation compensation technique during seismic imaging. We here present the $Q$ -compensated viscoelastic reverse time migration ( $Q$ -ERTM) based on the decoupled fractional Laplacian (DFL) viscoelastic wave equation for high-resolution crosswell imaging. We develop an explicit stabilization scheme to resolve the cumbersome numerical instability issue in $Q$ -ERTM. The merits of explicit stabilization are twofold. First, it simplifies the workflows of the $Q$ -ERTM by avoiding domain transforms. In addition, it provides a flexible way for stabilization parameter tuning by introducing a reference scaling factor. We follow the best practices of high-performance computing with the MPI + CUDA configuration for numerical implementation. A toy crosswell imaging example and a more realistic time-lapse crosswell seismic survey with a CO 2 plume injection are provided to verify the feasibility and stability of the proposed method.
- 20 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-11
Crosswell Seismic Imaging Using Q-Compensated Viscoelastic Reverse Time Migration With Explicit Stabilization
The increasing complexity of seismic exploration projects and the request for higher imaging resolution have driven the geophysics community to look for a sound understanding of the subsurface formation to optimize seismic structure interpretation and reservoir characterization. Crosswell seismic survey aims at obtaining higher resolution images of the interwell regions and more accurately characterizing the reservoir dynamics. However, the presence of the intrinsic seismic attenuation of rocks as seismic waves propagate through the subsurface results in amplitude decay and velocity dispersion. This inevitably decreases the imaging resolution and the reliability of the subsequent seismic interpretation and reservoir characterization. To compensate for the attenuating effect, one may restore to attenuation compensation technique during seismic imaging. We here present the $Q$ -compensated viscoelastic reverse time migration ( $Q$ -ERTM) based on the decoupled fractional Laplacian (DFL) viscoelastic wave equation for high-resolution crosswell imaging. We develop an explicit stabilization scheme to resolve the cumbersome numerical instability issue in $Q$ -ERTM. The merits of explicit stabilization are twofold. First, it simplifies the workflows of the $Q$ -ERTM by avoiding domain transforms. In addition, it provides a flexible way for stabilization parameter tuning by introducing a reference scaling factor. We follow the best practices of high-performance computing with the MPI + CUDA configuration for numerical implementation. A toy crosswell imaging example and a more realistic time-lapse crosswell seismic survey with a CO 2 plume injection are provided to verify the feasibility and stability of the proposed method.
- Open Access
- 18 March 2022
- Published by Wolters Kluwer Health in Medicine
- Vol. 101 (11)
Effectiveness and safety of aromatherapy massage for knee osteoarthritis
Background: The purpose of this study was to evaluate the effectiveness and safety of aromatherapy massage in the treatment of knee osteoarthritis. Methods: To collect relevant literature, we will research following databases: PubMed, Web of Science, Scopus, Cochrane Library, Embase, China National Knowledge Infrastructure, China Science and Technology Journal Database and Wanfang Data the time is from inception to December 30, 2021, and the language is limited to Chinese and English. In addition, we will retrieve other literature resources, including the Chinese Clinical Trial Register, conference papers. Two reviewers will independently complete the literature screen and data extraction, and quality assessment of the included studies will be independently completed by 2 other researchers. The primary outcomes included the Western Ontario and McMaster Universities Osteoarthritis Index scale, the visual analog scale, symptom score, Lysholm knee scoring scale, adverse events, and adverse reactions as secondary outcomes would be assessed. RevMan V.5.4.1 software will be used for meta-analysis, and the Grading of Recommendations Assessment, Development and Evaluation (GRADE) will be used to assess the quality of evidence. Results: This systematic review will be showed a high-quality synthesis to evaluate the efficacy and safety of aromatherapy massage in the treatment of knee osteoarthritis, providing reference for the safe and effective treatment of knee osteoarthritis. Conclusion: This study provides evidence of whether aromatherapy massage is effective. Systematic review registration: INPLASY202210010 URL: https://inplasy.com/inplasy-2022-1-0010/
- 18 March 2022
- Published by Wolters Kluwer Health in Medicine
- Vol. 101 (11)
Open AccessEffectiveness and safety of aromatherapy massage for knee osteoarthritis
Background: The purpose of this study was to evaluate the effectiveness and safety of aromatherapy massage in the treatment of knee osteoarthritis. Methods: To collect relevant literature, we will research following databases: PubMed, Web of Science, Scopus, Cochrane Library, Embase, China National Knowledge Infrastructure, China Science and Technology Journal Database and Wanfang Data the time is from inception to December 30, 2021, and the language is limited to Chinese and English. In addition, we will retrieve other literature resources, including the Chinese Clinical Trial Register, conference papers. Two reviewers will independently complete the literature screen and data extraction, and quality assessment of the included studies will be independently completed by 2 other researchers. The primary outcomes included the Western Ontario and McMaster Universities Osteoarthritis Index scale, the visual analog scale, symptom score, Lysholm knee scoring scale, adverse events, and adverse reactions as secondary outcomes would be assessed. RevMan V.5.4.1 software will be used for meta-analysis, and the Grading of Recommendations Assessment, Development and Evaluation (GRADE) will be used to assess the quality of evidence. Results: This systematic review will be showed a high-quality synthesis to evaluate the efficacy and safety of aromatherapy massage in the treatment of knee osteoarthritis, providing reference for the safe and effective treatment of knee osteoarthritis. Conclusion: This study provides evidence of whether aromatherapy massage is effective. Systematic review registration: INPLASY202210010 URL: https://inplasy.com/inplasy-2022-1-0010/
- 7 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-10
A Novel Multichannel Seismic Deconvolution Method via Structure-Oriented Regularization
Seismic deconvolution is an effective approach to improve the resolution of seismic data and plays an important role in migration imaging, reservoir prediction and other fields. However, conventional deconvolution methods are usually based on sparse-type regularization (e.g., $L_{1}$ -norm) and adopt a trace-by-trace inversion strategy to reconstruct the subsurface reflectivity series. Although such methods can improve the resolution of seismic records to a certain extent, the lack of spatial constraint will result in poor spatial continuity in the reconstructed reflectivity. This phenomenon is particularly obvious in regions with complicated geologic structures. For the purpose of overcoming this issue, we have developed a structure-oriented regularization-based multichannel sparse spike deconvolution (SOR-based MSSD) method. This method imposes $L_{1}$ -norm regularization on the reflectivity to obtain the high-resolution subsurface reflectivity series and imposes structure-oriented regularization (SOR) on the expected high-resolution seismic data to improve the spatial continuity of the inversion result. First, we construct SOR term based on the local structural orientations which can be estimated from the poststack seismic data. Then, we integrate the seismic data misfit term, the $L_{1}$ -norm constraint term, and the SOR term to formulate the objective function. At last, we use the alternating direction method of multipliers (ADMMs) to efficiently solve the objective function. We compare the SOR-based MSSD with existing methods by using synthetic and field data. Both deconvolution examples illustrate the performance of proposed method in terms of improving the spatial continuity.
- 7 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-10
A Novel Multichannel Seismic Deconvolution Method via Structure-Oriented Regularization
Seismic deconvolution is an effective approach to improve the resolution of seismic data and plays an important role in migration imaging, reservoir prediction and other fields. However, conventional deconvolution methods are usually based on sparse-type regularization (e.g., $L_{1}$ -norm) and adopt a trace-by-trace inversion strategy to reconstruct the subsurface reflectivity series. Although such methods can improve the resolution of seismic records to a certain extent, the lack of spatial constraint will result in poor spatial continuity in the reconstructed reflectivity. This phenomenon is particularly obvious in regions with complicated geologic structures. For the purpose of overcoming this issue, we have developed a structure-oriented regularization-based multichannel sparse spike deconvolution (SOR-based MSSD) method. This method imposes $L_{1}$ -norm regularization on the reflectivity to obtain the high-resolution subsurface reflectivity series and imposes structure-oriented regularization (SOR) on the expected high-resolution seismic data to improve the spatial continuity of the inversion result. First, we construct SOR term based on the local structural orientations which can be estimated from the poststack seismic data. Then, we integrate the seismic data misfit term, the $L_{1}$ -norm constraint term, and the SOR term to formulate the objective function. At last, we use the alternating direction method of multipliers (ADMMs) to efficiently solve the objective function. We compare the SOR-based MSSD with existing methods by using synthetic and field data. Both deconvolution examples illustrate the performance of proposed method in terms of improving the spatial continuity.
- Open Access
- 1 January 2022
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 71 (7) , 076201-076201-8
In situ X-ray diffraction measurement of shock melting in vanadium
高压结构与相变研究对理解物质在极端压缩条件下的性质变化和动力学响应行为具有重要的科学价值, 然而部分过渡金属的动/静高压熔化线差异一直是多年来悬而未解的科学难题. 其中动、静高压固-液相界幅值差异最大的是第五副族金属, 以钒最为反常, 至今仍缺乏自洽的物理认识和理解. 本文采用高能脉冲激光驱动的瞬态X射线衍射诊断技术, 对冲击压缩下钒的熔化特性进行了研究, 首次获取了冲击压缩下钒在200 GPa范围内的晶体结构响应随压力变化的衍射图谱. 研究发现, 冲击压力为155 GPa时, 钒仍保持固态bcc相; 至约190 GPa时转变为液态. 这一结果否定了早期确定的静压熔化线, 与最新的冲击熔化线及高温高压相图符合, 为钒高压熔化线的统一认识提供了新的微观实验证据. 本工作亦可推广至其他材料熔化特性的研究工作中.
- 1 January 2022
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 71 (7) , 076201-076201-8
Open AccessIn situ X-ray diffraction measurement of shock melting in vanadium
高压结构与相变研究对理解物质在极端压缩条件下的性质变化和动力学响应行为具有重要的科学价值, 然而部分过渡金属的动/静高压熔化线差异一直是多年来悬而未解的科学难题. 其中动、静高压固-液相界幅值差异最大的是第五副族金属, 以钒最为反常, 至今仍缺乏自洽的物理认识和理解. 本文采用高能脉冲激光驱动的瞬态X射线衍射诊断技术, 对冲击压缩下钒的熔化特性进行了研究, 首次获取了冲击压缩下钒在200 GPa范围内的晶体结构响应随压力变化的衍射图谱. 研究发现, 冲击压力为155 GPa时, 钒仍保持固态bcc相; 至约190 GPa时转变为液态. 这一结果否定了早期确定的静压熔化线, 与最新的冲击熔化线及高温高压相图符合, 为钒高压熔化线的统一认识提供了新的微观实验证据. 本工作亦可推广至其他材料熔化特性的研究工作中.
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-11
An Unsplit CFS-PML Scheme for the Second-Order Wave Equation With Its Application in Fractional Viscoacoustic Simulation
The unsplit complex frequency-shifted perfectly matched layer (CFS-PML) has been widely used in the first-order wave equation in velocity and stress while rarely formulated for the wave equation recast as a second-order system in displacement. Among different variants of PML, the unsplit CFS-PML for the second-order wave equation enjoys better absorbing performance and numerical stability, compared to the traditional PML, due to the presence of the general form of CFS stretching factors, as well as higher computational efficiency over the split PMLs since it avoids wave equation order reduction and splitting the state variables into multiple directional components. This study aims to develop an unsplit CFS-PML scheme for the second-order wave equation and devote specific attention to fractional viscoacoustic simulation where fractional time derivatives are involved and hard to be reformulated into a first-order form. In the complex space, PML is typically regarded as an analytical continuation of the real coordinates; thus, we define an explicit coordinate stretching operator acting on the Laplacian operator. This stretching operator consists of several convolution terms; each of them can be efficiently resolved by a recursive convolution updating strategy. Viscoacoustic simulations on homogeneous Pierre Shale, Marmousi model, and 3-D SEG/EAGE overthrust model verify the feasibility and absorbing the performance of our proposed scheme.
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-11
An Unsplit CFS-PML Scheme for the Second-Order Wave Equation With Its Application in Fractional Viscoacoustic Simulation
The unsplit complex frequency-shifted perfectly matched layer (CFS-PML) has been widely used in the first-order wave equation in velocity and stress while rarely formulated for the wave equation recast as a second-order system in displacement. Among different variants of PML, the unsplit CFS-PML for the second-order wave equation enjoys better absorbing performance and numerical stability, compared to the traditional PML, due to the presence of the general form of CFS stretching factors, as well as higher computational efficiency over the split PMLs since it avoids wave equation order reduction and splitting the state variables into multiple directional components. This study aims to develop an unsplit CFS-PML scheme for the second-order wave equation and devote specific attention to fractional viscoacoustic simulation where fractional time derivatives are involved and hard to be reformulated into a first-order form. In the complex space, PML is typically regarded as an analytical continuation of the real coordinates; thus, we define an explicit coordinate stretching operator acting on the Laplacian operator. This stretching operator consists of several convolution terms; each of them can be efficiently resolved by a recursive convolution updating strategy. Viscoacoustic simulations on homogeneous Pierre Shale, Marmousi model, and 3-D SEG/EAGE overthrust model verify the feasibility and absorbing the performance of our proposed scheme.