Jessica E. Sanow
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jessica E. Sanow has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Steven R. Fassnacht
ESS-Watershed Science, Colorado State University, Fort Collins, Colorado, USA
10 shared publications - Kazuyoshi Suzuki
Institute of Arctic Climate and Environment Research, JAMSTEC, Yokohama, Japan
3 shared publications - Molly E. Tedesche
US Army Corps Engineer Research and Development Center, Cold Regions Research and Engineering Laboratory, Hanover, NH, USA, and Coastal and Hydraulics Laboratory, Vicksburg, MS, USA
3 shared publications - Anna K. D. Pfohl
ESS-Watershed Science, Colorado State University, Fort Collins, CO 80523-1476, USA
2 shared publications - Graham A. Sexstone
U.S. Geological Survey, Colorado Water Science Center, Lakewood, CO 80225, USA
2 shared publications - Iuliana Oprea
Department of Mathematics, Colorado State University, Fort Collins, CO 80523, USA
2 shared publications
Latest Publications
- Open Access
Snow Surface Roughness at a Ski Resort During Melt
When snow is present, the snow surface is the interface between the atmosphere and the Earth’s surface. The snowpack energy balance is dictated in part by snow surface roughness, which can be quite dynamic. At the Sierra Nevada ski resort in Spain, we measured several snow surface forms: natural, with the presence of dust, with the presence of sun cups, and groomed snow (tracked and between tracks). The snow surface was assessed in 2-dimensions from snow roughness boards and in 3-dimensions from iPad surface scanning to measure across resolutions. Both data collection methods yielded similar roughness estimates via random roughness (RR) and variogram analysis (scale break, SB, and fractal dimension, D) for each distinct surface, yet the roughness differences between the surfaces were substantial. The geometry-based aerodynamic roughness length () was computed for the iPad-scanned surfaces, yielding an order-of-magnitude variability in . This produced an order-of-magnitude difference in modelled sublimation. This work can inform snow management at ski areas and reflects some of the snow-surface conditions encountered in a natural snowpack.Open AccessSnow Surface Roughness at a Ski Resort During Melt
When snow is present, the snow surface is the interface between the atmosphere and the Earth’s surface. The snowpack energy balance is dictated in part by snow surface roughness, which can be quite dynamic. At the Sierra Nevada ski resort in Spain, we measured several snow surface forms: natural, with the presence of dust, with the presence of sun cups, and groomed snow (tracked and between tracks). The snow surface was assessed in 2-dimensions from snow roughness boards and in 3-dimensions from iPad surface scanning to measure across resolutions. Both data collection methods yielded similar roughness estimates via random roughness (RR) and variogram analysis (scale break, SB, and fractal dimension, D) for each distinct surface, yet the roughness differences between the surfaces were substantial. The geometry-based aerodynamic roughness length () was computed for the iPad-scanned surfaces, yielding an order-of-magnitude variability in . This produced an order-of-magnitude difference in modelled sublimation. This work can inform snow management at ski areas and reflects some of the snow-surface conditions encountered in a natural snowpack. - Open Access
- 2 December 2025
- Published by MDPI AG in Preprints.org
Ski Resort Snow Surface Roughness
The snowpack is the interface between the atmosphere and the earth’s surface when snow is present. The snowpack energy balance is dictated in part by the nature of the snow surface. The roughness of the snow surface can be quite dynamic. At the Sierra Nevada ski resort in Spain, we measured several snow surface forms: natural, with the presence of dust, with the presence of sun cups, and groomed snow (tracked and between tracks). The snow surface was assessed in 2-D from snow roughness boards and in 3-D from iPad surface scanning to measure across resolutions. Both data collection methods provided similar roughness estimates via the random roughness (RR) and variogram analysis (scale break, SB and fractal dimension, D) for each distinct surface. The geometry-based aerodynamic roughness length (z0) was computed for the iPad-scanned surfaces yielding an order of magnitude variability in z0. This produced substantial differences in modelled sublimation.
- 2 December 2025
- Published by MDPI AG in Preprints.org
Open AccessSki Resort Snow Surface Roughness
The snowpack is the interface between the atmosphere and the earth’s surface when snow is present. The snowpack energy balance is dictated in part by the nature of the snow surface. The roughness of the snow surface can be quite dynamic. At the Sierra Nevada ski resort in Spain, we measured several snow surface forms: natural, with the presence of dust, with the presence of sun cups, and groomed snow (tracked and between tracks). The snow surface was assessed in 2-D from snow roughness boards and in 3-D from iPad surface scanning to measure across resolutions. Both data collection methods provided similar roughness estimates via the random roughness (RR) and variogram analysis (scale break, SB and fractal dimension, D) for each distinct surface. The geometry-based aerodynamic roughness length (z0) was computed for the iPad-scanned surfaces yielding an order of magnitude variability in z0. This produced substantial differences in modelled sublimation.
- Open Access
Let Us Change the Aerodynamic Roughness Length as a Function of Snow Depth
A shallow, seasonal snowpack is rarely homogeneous in depth, layer characteristics, or surface structure throughout an entire winter. Aerodynamic roughness length () is typically considered a static parameter within hydrologic and atmospheric models. Here, we present observations showing as a dynamic variable that is a function of snow depth (). This has a significant impact on sublimation modeling, especially for shallow snowpacks. Terrestrial LiDAR data were collected at nine different study sites in northwest Colorado from the 2019 to 2020 winter season to measure the spatial and temporal variability of the snowpack surface. These data were used to estimate the geometric from 91 site visits. Values of decrease during initial snow accumulation, as the snow conforms to the underlying terrain. Once the snowpack is sufficiently deep, which depends on the height of the ground surface roughness features, the surface becomes more uniform. As melt begins, increases, when the snow surface becomes more irregular. The correlation value of was altered by human disturbance at several of the sites. The versus correlation was almost constant, regardless of the initial roughness conditions that only affected the initial .Open AccessLet Us Change the Aerodynamic Roughness Length as a Function of Snow Depth
A shallow, seasonal snowpack is rarely homogeneous in depth, layer characteristics, or surface structure throughout an entire winter. Aerodynamic roughness length () is typically considered a static parameter within hydrologic and atmospheric models. Here, we present observations showing as a dynamic variable that is a function of snow depth (). This has a significant impact on sublimation modeling, especially for shallow snowpacks. Terrestrial LiDAR data were collected at nine different study sites in northwest Colorado from the 2019 to 2020 winter season to measure the spatial and temporal variability of the snowpack surface. These data were used to estimate the geometric from 91 site visits. Values of decrease during initial snow accumulation, as the snow conforms to the underlying terrain. Once the snowpack is sufficiently deep, which depends on the height of the ground surface roughness features, the surface becomes more uniform. As melt begins, increases, when the snow surface becomes more irregular. The correlation value of was altered by human disturbance at several of the sites. The versus correlation was almost constant, regardless of the initial roughness conditions that only affected the initial . - Open Access
- 25 September 2025
- Published by MDPI AG in Preprints.org
Let Us Change the Aerodynamic Roughness Length Hysteretically as a Function of Snow Depth
A shallow, seasonal snowpack is rarely homogeneous in depth, layer characteristics, or surface structure throughout an entire winter. Aerodynamic roughness length (z0) is typically considered a static parameter within hydrologic and atmospheric models. However, observations have shown that z0 is a dynamic variable, necessitating accurate spatial and temporal measurements of z0. Terrestrial LiDAR data were collected at nine different study sites in northwest Colorado from the 2019-2020 winter season to observe variability of the snowpack surface. Geometric z0 and snow depth (ds) observation over 112 site visits illustrated a change in z0 as a function of ds. Values of z0 decrease during initial snow accumulation, as the snow conforms to the underlying terrain. Once the snowpack is sufficiently deep, which depends on the height of the ground surface roughness features, the surface becomes more uniform. As melt begins, z0 increases, when the snow surface becomes more irregular. The correlation varied spatially and temporally though; it was obscured by snowpack surface modifications, such as the presence of vegetation, anthropogenic or ecologic influence. The rate of change in the z0 versus ds correlation was almost constant, regardless of the initial roughness conditions that only affected the initial z0.
- 25 September 2025
- Published by MDPI AG in Preprints.org
Open AccessLet Us Change the Aerodynamic Roughness Length Hysteretically as a Function of Snow Depth
A shallow, seasonal snowpack is rarely homogeneous in depth, layer characteristics, or surface structure throughout an entire winter. Aerodynamic roughness length (z0) is typically considered a static parameter within hydrologic and atmospheric models. However, observations have shown that z0 is a dynamic variable, necessitating accurate spatial and temporal measurements of z0. Terrestrial LiDAR data were collected at nine different study sites in northwest Colorado from the 2019-2020 winter season to observe variability of the snowpack surface. Geometric z0 and snow depth (ds) observation over 112 site visits illustrated a change in z0 as a function of ds. Values of z0 decrease during initial snow accumulation, as the snow conforms to the underlying terrain. Once the snowpack is sufficiently deep, which depends on the height of the ground surface roughness features, the surface becomes more uniform. As melt begins, z0 increases, when the snow surface becomes more irregular. The correlation varied spatially and temporally though; it was obscured by snowpack surface modifications, such as the presence of vegetation, anthropogenic or ecologic influence. The rate of change in the z0 versus ds correlation was almost constant, regardless of the initial roughness conditions that only affected the initial z0.
- Open Access
- 8 June 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17  (12) , 1984
A New Formulation and Code to Compute Aerodynamic Roughness Length for Gridded Geometry—Tested on Lidar-Derived Snow Surfaces
The roughness of the Earth’s surface dictates the nature of air flow across it. Detailed meteorological data that are necessary to access the aerodynamic roughness () are not widely collected and, as such, the geometry of a surface can be used to estimate . Here, we present a novel formulation, and the corresponding computer code, to compute based on the Lettau (1969) geometric approach. The new code produces a mean , as well as a histogram of all values for each individual roughness element (e.g., 10 s of thousand for the 1000 × 1000 grids) discretized using watersheds, as well as directional diagrams, which can be matches with the wind rose for the location. The formulation includes two parameters that may optionally be applied to smooth the surface before calculating . By calculating as a function of these two parameters, we demonstrate the sensitivity of the value to these parameter choices. Since a large portion of the Earth’s surface is snow covered during some parts of the year, and the roughness of the snow surface varies over the snow season and over space, we apply the code to three snow surface datasets. Each surface is during a different phases of the snowpack. Each surface is evaluated at two resolutions). These surfaces are: fresh snow accumulation (1 m2 at 1 and 10 mm), peak accumulation (1 km2 at 1 and 10 m) and ablation sun cups (25 m2 at 5 and 50 mm).- 8 June 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17  (12) , 1984
Open AccessA New Formulation and Code to Compute Aerodynamic Roughness Length for Gridded Geometry—Tested on Lidar-Derived Snow Surfaces
The roughness of the Earth’s surface dictates the nature of air flow across it. Detailed meteorological data that are necessary to access the aerodynamic roughness () are not widely collected and, as such, the geometry of a surface can be used to estimate . Here, we present a novel formulation, and the corresponding computer code, to compute based on the Lettau (1969) geometric approach. The new code produces a mean , as well as a histogram of all values for each individual roughness element (e.g., 10 s of thousand for the 1000 × 1000 grids) discretized using watersheds, as well as directional diagrams, which can be matches with the wind rose for the location. The formulation includes two parameters that may optionally be applied to smooth the surface before calculating . By calculating as a function of these two parameters, we demonstrate the sensitivity of the value to these parameter choices. Since a large portion of the Earth’s surface is snow covered during some parts of the year, and the roughness of the snow surface varies over the snow season and over space, we apply the code to three snow surface datasets. Each surface is during a different phases of the snowpack. Each surface is evaluated at two resolutions). These surfaces are: fresh snow accumulation (1 m2 at 1 and 10 mm), peak accumulation (1 km2 at 1 and 10 m) and ablation sun cups (25 m2 at 5 and 50 mm). - Open Access
- 29 March 2025
- Published by MDPI AG in Preprints.org
A Geometric-based Aerodynamic Roughness Length Formulation and Code Applied to Lidar-derived Snow Surfaces
The roughness of the Earth’s surface dictates the nature of air flow across it. During some parts of the year, a large portion of the Earth’s surface is snow covered, and the roughness of the snow surface varies over the snow season and over space. Detailed meteorological data that are necessary to access the aerodynamic roughness (z0) are not widely collected and as such the geometry of a surface can be used to estimate z0. Here we present a formulation and the corresponding computer code to compute z0 based on the Lettau (1969) geometric approach. We apply it to three snow surface datasets, each at different phases of the snowpack (and each at two resolutions): fresh snow accumulation (1 m2 at 1 and 10 mm), peak accumulation (1 km2 at 1 and 10 m) and ablation sun cups (25 m2 at 5 and 50 mm). The new code produces a mean z0, as well as a histogram of all z0 values for each individual roughness element (10s of thousand for the 1000 x 1000 grids), as well as directional z0 diagrams, which can be matches with the wind rose for the location. The formulation includes two parameters that may optionally be applied to smooth the surface before calculating z0. By calculating z0 as a function of these two parameters, we demonstrate the sensitivity of the z0 value to these parameter choices.
- 29 March 2025
- Published by MDPI AG in Preprints.org
Open AccessA Geometric-based Aerodynamic Roughness Length Formulation and Code Applied to Lidar-derived Snow Surfaces
The roughness of the Earth’s surface dictates the nature of air flow across it. During some parts of the year, a large portion of the Earth’s surface is snow covered, and the roughness of the snow surface varies over the snow season and over space. Detailed meteorological data that are necessary to access the aerodynamic roughness (z0) are not widely collected and as such the geometry of a surface can be used to estimate z0. Here we present a formulation and the corresponding computer code to compute z0 based on the Lettau (1969) geometric approach. We apply it to three snow surface datasets, each at different phases of the snowpack (and each at two resolutions): fresh snow accumulation (1 m2 at 1 and 10 mm), peak accumulation (1 km2 at 1 and 10 m) and ablation sun cups (25 m2 at 5 and 50 mm). The new code produces a mean z0, as well as a histogram of all z0 values for each individual roughness element (10s of thousand for the 1000 x 1000 grids), as well as directional z0 diagrams, which can be matches with the wind rose for the location. The formulation includes two parameters that may optionally be applied to smooth the surface before calculating z0. By calculating z0 as a function of these two parameters, we demonstrate the sensitivity of the z0 value to these parameter choices.
- 27 August 2024
- Published by Elsevier in Polar Science
- Vol. 41
How does a dynamic surface roughness affect snowpack modeling?
- 27 August 2024
- Published by Elsevier in Polar Science
- Vol. 41
How does a dynamic surface roughness affect snowpack modeling?
- Open Access
Location Dictates Snow Aerodynamic Roughness
We conducted an experiment comparing wind speeds and aerodynamic roughness length (z0) values over three snow surface conditions, including a flat smooth surface, a wavy smooth surface, and a wavy surface with fresh snow added, using the wind simulation tunnel at the Shinjo Cryospheric Laboratory in Shinjo, Japan. The results indicate that the measurement location impacts the computed z0 values up to a certain measurement height. When we created small (4 cm high) snow bedforms as waves with a 50 cm period, the computed z0 values varied by up to 35% based on the horizontal sampling location over the wave (furrow versus trough). These computed z0 values for the smooth snow waves were not significantly different than those for the smooth flat snow surface. Fresh snow was then blown over the snow waves. Here, for three of four horizontal sampling locations, the computed z0 values were significantly different over the fresh snow-covered waves as compared to those over the smooth snow waves. Since meteorological stations are usually established over flat land surfaces, a smooth snow surface texture may seem to be an appropriate assumption when calculating z0, but the snowpack surface can vary substantially in space and time. Therefore, the nature of the snow surface geometry should be considered variable when estimating a z0 value, especially for modeling purposes.
Open AccessLocation Dictates Snow Aerodynamic Roughness
We conducted an experiment comparing wind speeds and aerodynamic roughness length (z0) values over three snow surface conditions, including a flat smooth surface, a wavy smooth surface, and a wavy surface with fresh snow added, using the wind simulation tunnel at the Shinjo Cryospheric Laboratory in Shinjo, Japan. The results indicate that the measurement location impacts the computed z0 values up to a certain measurement height. When we created small (4 cm high) snow bedforms as waves with a 50 cm period, the computed z0 values varied by up to 35% based on the horizontal sampling location over the wave (furrow versus trough). These computed z0 values for the smooth snow waves were not significantly different than those for the smooth flat snow surface. Fresh snow was then blown over the snow waves. Here, for three of four horizontal sampling locations, the computed z0 values were significantly different over the fresh snow-covered waves as compared to those over the smooth snow waves. Since meteorological stations are usually established over flat land surfaces, a smooth snow surface texture may seem to be an appropriate assumption when calculating z0, but the snowpack surface can vary substantially in space and time. Therefore, the nature of the snow surface geometry should be considered variable when estimating a z0 value, especially for modeling purposes.
- Open Access
Snow Surface Roughness across Spatio-Temporal Scales
The snow surface is at the interface between the atmosphere and Earth. The surface of the snowpack changes due to its interaction with precipitation, wind, humidity, short- and long-wave radiation, underlying terrain characteristics, and land cover. These connections create a dynamic snow surface that impacts the energy and mass balance of the snowpack, blowing snow potential, and other snowpack processes. Despite this, the snow surface is generally considered a constant parameter in many Earth system models. Data from the National Aeronautics and Space Administration (NASA) Cold Land Processes Experiment (CLPX) collected in 2002 and 2003 across northern Colorado were used to investigate the spatial and temporal variability of snow surface roughness. The random roughness (RR) and fractal dimension (D) metrics used in this investigation are well correlated. However, roughness is not correlated across scales, computed here from snow roughness boards at a millimeter resolution and airborne lidar at a meter resolution. Process scale differences were found based on land cover at each of the two measurement scales, as appraised through measurements in the forest and alpine.
Open AccessSnow Surface Roughness across Spatio-Temporal Scales
The snow surface is at the interface between the atmosphere and Earth. The surface of the snowpack changes due to its interaction with precipitation, wind, humidity, short- and long-wave radiation, underlying terrain characteristics, and land cover. These connections create a dynamic snow surface that impacts the energy and mass balance of the snowpack, blowing snow potential, and other snowpack processes. Despite this, the snow surface is generally considered a constant parameter in many Earth system models. Data from the National Aeronautics and Space Administration (NASA) Cold Land Processes Experiment (CLPX) collected in 2002 and 2003 across northern Colorado were used to investigate the spatial and temporal variability of snow surface roughness. The random roughness (RR) and fractal dimension (D) metrics used in this investigation are well correlated. However, roughness is not correlated across scales, computed here from snow roughness boards at a millimeter resolution and airborne lidar at a meter resolution. Process scale differences were found based on land cover at each of the two measurement scales, as appraised through measurements in the forest and alpine.
- Open Access
How Do We Define Climate Change? Considering the Temporal Resolution of Niveo-Meteorological Data
Historically, snowpack trends have been assessed using one fixed date to represent peak snow accumulation prior to the onset of melt. Subsequent trend analyses have considered the peak snow water equivalent (SWE), but the date of peak SWE can vary by several months due to inter-annual variability in snow accumulation and melt patterns. A 2018 assessment evaluated monthly SWE trends. However, since the month is a societal construct, this current work examines daily trends in SWE, cumulative precipitation, and temperature. The method was applied to 13 snow telemetry stations in Northern Colorado, USA for the period from 1981 to 2018. Temperature trends were consistent among all the stations; warming trends occurred 63% of the time from 1 October through 24 May, with the trends oscillating from warming to cooling over about a 10-day period. From 25 May to 30 September, a similar oscillation was observed, but warming trends occurred 86% of the time. SWE and precipitation trends illustrate temporal patterns that are scaled based on location. Specifically, lower elevations stations are tending to record more snowfall while higher elevation stations are recording less. The largest SWE, cumulative precipitation, and temperature trends were +30 to −70 mm/decade, +30 to −30 mm/decade, and +4 to −2.8 °C/decade, respectively. Trends were statistically significance an average of 25.8, 4.5, and 29.4% of the days for SWE, cumulative precipitation, and temperature, respectively. The trend in precipitation as snow ranged from +/−2%/decade, but was not significant at any station.
Open AccessHow Do We Define Climate Change? Considering the Temporal Resolution of Niveo-Meteorological Data
Historically, snowpack trends have been assessed using one fixed date to represent peak snow accumulation prior to the onset of melt. Subsequent trend analyses have considered the peak snow water equivalent (SWE), but the date of peak SWE can vary by several months due to inter-annual variability in snow accumulation and melt patterns. A 2018 assessment evaluated monthly SWE trends. However, since the month is a societal construct, this current work examines daily trends in SWE, cumulative precipitation, and temperature. The method was applied to 13 snow telemetry stations in Northern Colorado, USA for the period from 1981 to 2018. Temperature trends were consistent among all the stations; warming trends occurred 63% of the time from 1 October through 24 May, with the trends oscillating from warming to cooling over about a 10-day period. From 25 May to 30 September, a similar oscillation was observed, but warming trends occurred 86% of the time. SWE and precipitation trends illustrate temporal patterns that are scaled based on location. Specifically, lower elevations stations are tending to record more snowfall while higher elevation stations are recording less. The largest SWE, cumulative precipitation, and temperature trends were +30 to −70 mm/decade, +30 to −30 mm/decade, and +4 to −2.8 °C/decade, respectively. Trends were statistically significance an average of 25.8, 4.5, and 29.4% of the days for SWE, cumulative precipitation, and temperature, respectively. The trend in precipitation as snow ranged from +/−2%/decade, but was not significant at any station.