Joyraj Chakraborty
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Joyraj Chakraborty has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Andrzej Katunin
Department of Fundamentals of Machinery Design, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland
5 shared publications Marek Salamak
3 shared publications- Marek Stolinski
Neostrain Company, Kraków, Poland
3 shared publications - Martin J. Reed
School of Computer Science and Electronic Engineering, University of Essex, UK
3 shared publications Piotr Klikowicz
3 shared publicationsBerwich Sluer
2 shared publications
Latest Publications
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Signal Processing Letters
- Vol. 33, 1-5
S 3 G-Net: Lightweight Banded Network for Real-Time Speech Enhancement
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Signal Processing Letters
- Vol. 33, 1-5
S 3 G-Net: Lightweight Banded Network for Real-Time Speech Enhancement
- 24 September 2025
- Published by Springer Nature
- p. 69-84
Data Virtualization for Machine Learning
- 15 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Audio, Speech and Language Processing
- Vol. 33, 3609-3622
Neuro-Fuzzy Voice Quality Improvement for Low-Power, Half-Duplex, Communication
Half-duplex mobile radio systems are commonly used for speech communication, often in challenging environments where background noise may prevent speech intelligibility. These systems usually operate with modest battery capacity which strictly limits the available computational power. In this paper, we present a noise suppression approach that uses lightweight machine learning. The machine learning leverages a neuro-fuzzy logic-based neural network to create accurate noise estimation that is used adaptively to create a filter for noise reduction. The system buffers a number of noise samples, triggered by the half-duplex key press, allowing the solution to adapt to recent changes in the background auditory noise. The selection of a neuro-fuzzy logic-based neural network is driven by the necessity for a low-power implementation suitable for mobile, power-constrained terminals. The proposed system is compared with both traditional noise suppression methods as well as with a deep convolutional neural network (DCNN) variant of our system. The results demonstrate that our system significantly outperforms traditional methods in terms of both subjective and objective quality metrics. Further, they show that, although the DCNN variant achieves comparable performance, it has a high computational cost which renders it unsuitable for low-power digital personal radio systems. To validate its practicality, the proposed method is tested in a real-time system, demonstrating its compatibility with constrained devices.
- 15 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Audio, Speech and Language Processing
- Vol. 33, 3609-3622
Neuro-Fuzzy Voice Quality Improvement for Low-Power, Half-Duplex, Communication
Half-duplex mobile radio systems are commonly used for speech communication, often in challenging environments where background noise may prevent speech intelligibility. These systems usually operate with modest battery capacity which strictly limits the available computational power. In this paper, we present a noise suppression approach that uses lightweight machine learning. The machine learning leverages a neuro-fuzzy logic-based neural network to create accurate noise estimation that is used adaptively to create a filter for noise reduction. The system buffers a number of noise samples, triggered by the half-duplex key press, allowing the solution to adapt to recent changes in the background auditory noise. The selection of a neuro-fuzzy logic-based neural network is driven by the necessity for a low-power implementation suitable for mobile, power-constrained terminals. The proposed system is compared with both traditional noise suppression methods as well as with a deep convolutional neural network (DCNN) variant of our system. The results demonstrate that our system significantly outperforms traditional methods in terms of both subjective and objective quality metrics. Further, they show that, although the DCNN variant achieves comparable performance, it has a high computational cost which renders it unsuitable for low-power digital personal radio systems. To validate its practicality, the proposed method is tested in a real-time system, demonstrating its compatibility with constrained devices.
- 10 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 71 (2) , 3143-3155
Intelligent Speech Handover for Smart Speakers Through Deep Learning: A Custom Loss Function Approach
The consistent growth of the smart speaker market has established far-field speech communication as an alternative to traditional handsets. When multiple smart speakers are used, a mechanism for seamless handover is needed, which is not currently supported. This paper presents two novel contributions that, together, enable seamless handover: using speech signals to select a suitable smart speaker through machine learning; and, reduction in media disruption during handover by local modifications to the session initiation protocol (SIP). The proposed solution uses prediction based on a one-dimensional convolutional neural network (1DCNN) and a custom loss function. A comprehensive evaluation with multiple datasets incorporating different types of audio signals, movement loci, and, varying room scenarios demonstrates the effectiveness of the suggested method in predicting the most appropriate smart speaker. Our proposal is shown to be highly effective when compared against a previously proposed predictor or using a standard 1DCNN loss function and operates with a low computational cost, suitable for consumer smart speakers.
- 10 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 71 (2) , 3143-3155
Intelligent Speech Handover for Smart Speakers Through Deep Learning: A Custom Loss Function Approach
The consistent growth of the smart speaker market has established far-field speech communication as an alternative to traditional handsets. When multiple smart speakers are used, a mechanism for seamless handover is needed, which is not currently supported. This paper presents two novel contributions that, together, enable seamless handover: using speech signals to select a suitable smart speaker through machine learning; and, reduction in media disruption during handover by local modifications to the session initiation protocol (SIP). The proposed solution uses prediction based on a one-dimensional convolutional neural network (1DCNN) and a custom loss function. A comprehensive evaluation with multiple datasets incorporating different types of audio signals, movement loci, and, varying room scenarios demonstrates the effectiveness of the suggested method in predicting the most appropriate smart speaker. Our proposal is shown to be highly effective when compared against a previously proposed predictor or using a standard 1DCNN loss function and operates with a low computational cost, suitable for consumer smart speakers.
- Open Access
- 24 February 2022
- Published by MDPI AG in Mathematics
- Vol. 10 (5) , 724
Signal-Level Fusion Approach for Embedded Ultrasonic Sensors in Damage Detection of Real RC Structures
This paper presents a novel methodology to fuse signals from multiple ultrasonic sensors and detect cracks in the reinforced concrete reference structure using nondecimate discrete wavelet transform. The behaviour of a reinforced concrete structure subjected to operational changes is considered. The changes/damage detection procedure is based on a novel sensor fusion method. Several advantages of the proposed approach using the sensor fusion method with respect to features from single pair of sensors were shown and discussed based on the tested objects. A CWT feature-based approach is considered to extract damage-sensitive features. Experimental results using the proposed approach show a probability of detection greater than 94% when detecting cracks due to quasistatic load. Due to the comprehensive effectiveness and low computational complexity, the proposed approach could be performed in large real structural damage assessment problems as well.
- 24 February 2022
- Published by MDPI AG in Mathematics
- Vol. 10 (5) , 724
Open AccessSignal-Level Fusion Approach for Embedded Ultrasonic Sensors in Damage Detection of Real RC Structures
This paper presents a novel methodology to fuse signals from multiple ultrasonic sensors and detect cracks in the reinforced concrete reference structure using nondecimate discrete wavelet transform. The behaviour of a reinforced concrete structure subjected to operational changes is considered. The changes/damage detection procedure is based on a novel sensor fusion method. Several advantages of the proposed approach using the sensor fusion method with respect to features from single pair of sensors were shown and discussed based on the tested objects. A CWT feature-based approach is considered to extract damage-sensitive features. Experimental results using the proposed approach show a probability of detection greater than 94% when detecting cracks due to quasistatic load. Due to the comprehensive effectiveness and low computational complexity, the proposed approach could be performed in large real structural damage assessment problems as well.
- Open Access
Analysis of Sensitivity of Distance between Embedded Ultrasonic Sensors and Signal Processing on Damage Detectability in Concrete Structures
Damage detection of reinforced concrete (RC) structures is becoming a more attractive domain due to the safety issues arising in the last few decades. The damage in concrete can be caused by excessive exploitation of the structure or environmental effects. The cracks in concrete can be detected by different nondestructive testing methods. However, the available methods used for this purpose have numerous limitations. The technologies available in the market nowadays have difficulties detecting slowly progressive, locally limited damage. In addition, some of these methods cannot be applied, especially in hard-to-reach areas in the superstructures. In order to avoid these deficiencies, an embedded ultrasonic methodology can be used to detect cracks in RC structures. In this study, the methodology of crack detection supported with the advanced signal processing algorithm was proposed and verified on RC structures of various types, and cracks occurring between embedded sensors can be detected. Moreover, different pairs of ultrasonic sensors located in the considered structures are used for the analysis of the sensitivity of distance between them. It is shown that the ultrasonic sensors placed in the range of 1.5–2 m can detect cracks, even when the other methods failed to detect changes in the structure. The obtained results confirmed that diffuse ultrasonic sensor methodology is able to monitor real structures more effectively than traditional techniques.
Open AccessAnalysis of Sensitivity of Distance between Embedded Ultrasonic Sensors and Signal Processing on Damage Detectability in Concrete Structures
Damage detection of reinforced concrete (RC) structures is becoming a more attractive domain due to the safety issues arising in the last few decades. The damage in concrete can be caused by excessive exploitation of the structure or environmental effects. The cracks in concrete can be detected by different nondestructive testing methods. However, the available methods used for this purpose have numerous limitations. The technologies available in the market nowadays have difficulties detecting slowly progressive, locally limited damage. In addition, some of these methods cannot be applied, especially in hard-to-reach areas in the superstructures. In order to avoid these deficiencies, an embedded ultrasonic methodology can be used to detect cracks in RC structures. In this study, the methodology of crack detection supported with the advanced signal processing algorithm was proposed and verified on RC structures of various types, and cracks occurring between embedded sensors can be detected. Moreover, different pairs of ultrasonic sensors located in the considered structures are used for the analysis of the sensitivity of distance between them. It is shown that the ultrasonic sensors placed in the range of 1.5–2 m can detect cracks, even when the other methods failed to detect changes in the structure. The obtained results confirmed that diffuse ultrasonic sensor methodology is able to monitor real structures more effectively than traditional techniques.
- Open Access
Damage Detection in Multiple RC Structures Based on Embedded Ultrasonic Sensors and Wavelet Transform
This paper summarizes the results of research aimed at assessing cracks in reinforced concrete structures using embedded ultrasonic sensors. The diffuse ultrasonic waves were considered to evaluate the health status of the tested structures. There are different algorithms used to detect cracks in the structure, but most studies have been performed on benchmark reinforced concrete (RC) structures and in laboratory conditions. Since there were difficulties with the validity of damage detection in real structures in the presence of environmental changes and noises, the application of advanced signal processing methods was necessary. Therefore, the wavelet transform was applied to process ultrasonic signals acquired from multiple civil structures. It is shown that the ultrasonic sensors with an applied wavelet transform algorithm on collected signals can successfully detect cracks in the laboratory as well as in a real environment. Experimental results showed a perfect match for detecting damage and quasi-static load in the presence of environmental changes. The results were confirmed with other techniques. In addition, designing an extra filter for removing noises can be avoided by using the applied algorithms. The obtained results confirmed that diffuse ultrasonic sensor methodology with the proposed algorithm is useful and effective in monitoring real RC structures, and it is better than traditional techniques.
Open AccessDamage Detection in Multiple RC Structures Based on Embedded Ultrasonic Sensors and Wavelet Transform
This paper summarizes the results of research aimed at assessing cracks in reinforced concrete structures using embedded ultrasonic sensors. The diffuse ultrasonic waves were considered to evaluate the health status of the tested structures. There are different algorithms used to detect cracks in the structure, but most studies have been performed on benchmark reinforced concrete (RC) structures and in laboratory conditions. Since there were difficulties with the validity of damage detection in real structures in the presence of environmental changes and noises, the application of advanced signal processing methods was necessary. Therefore, the wavelet transform was applied to process ultrasonic signals acquired from multiple civil structures. It is shown that the ultrasonic sensors with an applied wavelet transform algorithm on collected signals can successfully detect cracks in the laboratory as well as in a real environment. Experimental results showed a perfect match for detecting damage and quasi-static load in the presence of environmental changes. The results were confirmed with other techniques. In addition, designing an extra filter for removing noises can be avoided by using the applied algorithms. The obtained results confirmed that diffuse ultrasonic sensor methodology with the proposed algorithm is useful and effective in monitoring real RC structures, and it is better than traditional techniques.
- Top Cited PapersOpen Access
- 11 January 2021
- Published by Springer Nature in Journal of Nondestructive Evaluation
- Vol. 40 (1) , 1-14
Noise Reduction for Improvement of Ultrasonic Monitoring Using Coda Wave Interferometry on a Real Bridge
Reinforced concrete bridges are iconic parts of modern infrastructure. They are designed for a minimum service life of 100 years. However, environmental factors and/or inappropriate use might cause overload and accelerate the deterioration of bridges. In extreme cases, bridges could collapse when necessary maintenance lacks. Thus, the permanent monitoring for structure health assessment has been proposed, which is the aim of structural health monitoring (SHM). Studies in laboratories have shown that ultrasonic (US) coda wave interferometry (CWI) using diffuse waves has high sensitivity and reliability to detect subtle changes in concrete structures. The creation of micro-cracks might be recognized at an early stage. Moreover, large-volume structures can be monitored with a relatively small number of US transducers. However, it is still a challenge to implement the CWI method in real SHM practical applications in an outdoor environment because of the complex external factors, such as various noise sources that interfere with the recorded signals. In this paper, monitoring data from a 36-m long bridge girder in Gliwice, Poland, instrumented with embedded US transducers, thermistors, and vibrating wire strain gauges, is presented. Noise estimation and reduction methods are discussed, and the influence of traffic, as well as temperature variation, are studied. As a result, the relative velocity variation of US waves following the temperature change with a very high precision of $$10^{-4} \%$$ is shown, and a good bridge health condition is inferred. The influence of lightweight real traffic is negligible. The study verified the feasibility of the implementation of the CWI method on real bridge structures.- 11 January 2021
- Published by Springer Nature in Journal of Nondestructive Evaluation
- Vol. 40 (1) , 1-14
Top Cited PapersOpen AccessNoise Reduction for Improvement of Ultrasonic Monitoring Using Coda Wave Interferometry on a Real Bridge
Reinforced concrete bridges are iconic parts of modern infrastructure. They are designed for a minimum service life of 100 years. However, environmental factors and/or inappropriate use might cause overload and accelerate the deterioration of bridges. In extreme cases, bridges could collapse when necessary maintenance lacks. Thus, the permanent monitoring for structure health assessment has been proposed, which is the aim of structural health monitoring (SHM). Studies in laboratories have shown that ultrasonic (US) coda wave interferometry (CWI) using diffuse waves has high sensitivity and reliability to detect subtle changes in concrete structures. The creation of micro-cracks might be recognized at an early stage. Moreover, large-volume structures can be monitored with a relatively small number of US transducers. However, it is still a challenge to implement the CWI method in real SHM practical applications in an outdoor environment because of the complex external factors, such as various noise sources that interfere with the recorded signals. In this paper, monitoring data from a 36-m long bridge girder in Gliwice, Poland, instrumented with embedded US transducers, thermistors, and vibrating wire strain gauges, is presented. Noise estimation and reduction methods are discussed, and the influence of traffic, as well as temperature variation, are studied. As a result, the relative velocity variation of US waves following the temperature change with a very high precision of $$10^{-4} \%$$ is shown, and a good bridge health condition is inferred. The influence of lightweight real traffic is negligible. The study verified the feasibility of the implementation of the CWI method on real bridge structures. - Open Access
Detection of Multiple Cracks in Four-Point Bending Tests Using the Coda Wave Interferometry Method
The enlargement of the cracks outside the permitted dimension is one of the main causes for the reduction of service life of Reinforced Concrete (RC) structures. Cracks can develop due to many causes such as dynamic or static load. When tensile stress exceeds the tensile strength of RC, cracks appear. Traditional techniques have limitations in early stage damage detection and localisation, especially on large-scale structures. The ultrasonic Coda Wave Interferometry (CWI) method using diffuse waves is one of the most promising methods to detect subtle changes in heterogeneous materials, such as concrete. In this paper, the assessment of the CWI method applied for multiple cracks opening detection on two specimens based on four-point bending test is presented. Both beams were monitored using a limited number of embedded Ultrasonic (US) transducers as well as other transducers and techniques (e.g., Digital Image Correlation (DIC), LVDT sensors, strain gauges, and Fiber Optics Sensor (FOS)). Results show that strain change and crack formation are successfully and efficiently detected by CWI method even earlier than by the other techniques. The CWI technique using embedded US transducers is undoubtedly a feasible, efficient, and promising method for long-term monitoring on real infrastructure.
Open AccessDetection of Multiple Cracks in Four-Point Bending Tests Using the Coda Wave Interferometry Method
The enlargement of the cracks outside the permitted dimension is one of the main causes for the reduction of service life of Reinforced Concrete (RC) structures. Cracks can develop due to many causes such as dynamic or static load. When tensile stress exceeds the tensile strength of RC, cracks appear. Traditional techniques have limitations in early stage damage detection and localisation, especially on large-scale structures. The ultrasonic Coda Wave Interferometry (CWI) method using diffuse waves is one of the most promising methods to detect subtle changes in heterogeneous materials, such as concrete. In this paper, the assessment of the CWI method applied for multiple cracks opening detection on two specimens based on four-point bending test is presented. Both beams were monitored using a limited number of embedded Ultrasonic (US) transducers as well as other transducers and techniques (e.g., Digital Image Correlation (DIC), LVDT sensors, strain gauges, and Fiber Optics Sensor (FOS)). Results show that strain change and crack formation are successfully and efficiently detected by CWI method even earlier than by the other techniques. The CWI technique using embedded US transducers is undoubtedly a feasible, efficient, and promising method for long-term monitoring on real infrastructure.
- Open Access
- 1 January 2020
- Published by Elsevier in Procedia Structural Integrity
- Vol. 25, 324-333
Damage Detection in Four Point Bending Test on Benchmark RC Structure Using Feature based Fusion
- 1 January 2020
- Published by Elsevier in Procedia Structural Integrity
- Vol. 25, 324-333
Open AccessDamage Detection in Four Point Bending Test on Benchmark RC Structure Using Feature based Fusion