Xiaozhong Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Xiaozhong Wu has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Jin Zhou
School of Chemistry and Chemical Engineering, Shandong University of Technology, Zibo 255000, PR China
10 shared publications - Shuping Zhuo
School of Chemical Engineering, Shandong University of Technology, Zibo, People’s Republic of China
9 shared publications - Pengfei Zhou
Shandong University of Technology
5 shared publications - Zhichao Miao
School of Chemistry and Chemical Engineering, Shandong University of Technology, Zibo 255000, PR China
5 shared publications Wei Xing
4 shared publications- Wei Xing
Shandong Key Laboratory of Intelligent Energy Materials, School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
4 shared publications
Latest Publications
- 11 August 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (9) , 6166-6176
Coupling LiF Dissolution Chemistry with Solvation Regulation for High-Power and Wide-Temperature Li/CF x Batteries
Lithium/fluorinated carbon (Li/CFx) batteries are promising for mission-critical power sources, but their practical performance is hindered by solvent-dominated Li+ solvation and insulating LiF accumulation. Herein, 2-fluoro-6-methoxyphenylboronic acid (FMPB) is introduced as a dual-functional electrolyte additive to regulate LiF dissolution and Li+ solvation. Experimental and theoretical analyses reveal that the Lewis acidic B center promotes B−F coordination, lowering LiF dissociation energy and facilitating LiF dissolution. Meanwhile, electronegative O and electron-deficient B sites induce BF4− participation in the inner solvation sheath, accelerating Li+ desolvation and constructing an inorganic-rich interphase. Benefiting from these synergistic effects, Li/CFx batteries achieve a record-high power density of 88,661 W kg−1 at 492.4 Wh kg−1 (30 °C, 50 A g−1) and stable operation from −35 to 60 °C. A 2 Ah pouch cell delivers 460.3 Wh kg−1 based on the entire cell mass. This work provides a strategy for electrolyte design in high-power Li/CFx batteries.
- 11 August 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (9) , 6166-6176
Coupling LiF Dissolution Chemistry with Solvation Regulation for High-Power and Wide-Temperature Li/CF x Batteries
Lithium/fluorinated carbon (Li/CFx) batteries are promising for mission-critical power sources, but their practical performance is hindered by solvent-dominated Li+ solvation and insulating LiF accumulation. Herein, 2-fluoro-6-methoxyphenylboronic acid (FMPB) is introduced as a dual-functional electrolyte additive to regulate LiF dissolution and Li+ solvation. Experimental and theoretical analyses reveal that the Lewis acidic B center promotes B−F coordination, lowering LiF dissociation energy and facilitating LiF dissolution. Meanwhile, electronegative O and electron-deficient B sites induce BF4− participation in the inner solvation sheath, accelerating Li+ desolvation and constructing an inorganic-rich interphase. Benefiting from these synergistic effects, Li/CFx batteries achieve a record-high power density of 88,661 W kg−1 at 492.4 Wh kg−1 (30 °C, 50 A g−1) and stable operation from −35 to 60 °C. A 2 Ah pouch cell delivers 460.3 Wh kg−1 based on the entire cell mass. This work provides a strategy for electrolyte design in high-power Li/CFx batteries.
- 16 December 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (1) , 185-194
Unlocking Charge Transfer Limitation toward Advanced Low-Temperature Sodium-Ion Batteries
- 16 December 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (1) , 185-194
Unlocking Charge Transfer Limitation toward Advanced Low-Temperature Sodium-Ion Batteries
- 7 September 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 506
Manipulating micropore structure of hard carbon as high‐performance anode for Sodium-Ion Batteries
- 7 September 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 506
Manipulating micropore structure of hard carbon as high‐performance anode for Sodium-Ion Batteries
- Open Access
- 15 May 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (22) , 14797-14807
Fluorinated saccharide-derived hard carbon as a cathode material of lithium primary batteries: effect of the polymerization degree of the starting saccharide
Fluorinated hard carbon materials have been considered to be a good candidate of cathode materials of Li/CFx batteries. However, the effect of the precursor structure of the hard carbon on the structure and electrochemical performance of fluorinated carbon cathode materials has yet to be fully studied. In this paper, a series of fluorinated hard carbon (FHC) materials are prepared by gas phase fluorination using saccharides with different degrees of polymerization as a carbon source, and their structure and electrochemical properties are studied. The experimental results show that the specific surface area, pore structure, and defect degree of hard carbon (HC) are enhanced as the polymerization degree (i.e. molecular weight) of the starting saccharide increases. At the same time, the F/C ratio increases after fluorination at the same temperature, and the contents of electrochemically inactive –CF2 and –CF3 groups also become higher. At the fluorination temperature of 500 °C, the obtained fluorinated glucose pyrolytic carbon shows good electrochemical properties, with a specific capacity of 876 mA h g−1, an energy density of 1872 W kg−1, and a power density of 3740 W kg−1. This study provides valuable insights and references for selecting suitable hard carbon precursors to develop high-performance fluorinated carbon cathode materials.
- 15 May 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (22) , 14797-14807
Open AccessFluorinated saccharide-derived hard carbon as a cathode material of lithium primary batteries: effect of the polymerization degree of the starting saccharide
Fluorinated hard carbon materials have been considered to be a good candidate of cathode materials of Li/CFx batteries. However, the effect of the precursor structure of the hard carbon on the structure and electrochemical performance of fluorinated carbon cathode materials has yet to be fully studied. In this paper, a series of fluorinated hard carbon (FHC) materials are prepared by gas phase fluorination using saccharides with different degrees of polymerization as a carbon source, and their structure and electrochemical properties are studied. The experimental results show that the specific surface area, pore structure, and defect degree of hard carbon (HC) are enhanced as the polymerization degree (i.e. molecular weight) of the starting saccharide increases. At the same time, the F/C ratio increases after fluorination at the same temperature, and the contents of electrochemically inactive –CF2 and –CF3 groups also become higher. At the fluorination temperature of 500 °C, the obtained fluorinated glucose pyrolytic carbon shows good electrochemical properties, with a specific capacity of 876 mA h g−1, an energy density of 1872 W kg−1, and a power density of 3740 W kg−1. This study provides valuable insights and references for selecting suitable hard carbon precursors to develop high-performance fluorinated carbon cathode materials.
- Open Access
- 25 October 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 2838
Enhanced Energy Density for P-Doped Hierarchically Porous Carbon-Based Symmetric Supercapacitor with High Operation Potential in Aqueous H2SO4 Electrolyte
Phosphorus-doped hierarchically porous carbon (HPC) is prepared with the assistance of freeze-drying using colloid silica and phytic acid dipotassium salt as a hard template and phosphorus source, respectively. Intensive material characterizations show that the freeze-drying process can effectively promote the porosity of HPC. The specific surface area and P content for HPC can reach up to 892 m2 g−1 and 2.78 at%, respectively. Electrochemical measurements in aqueous KOH and H2SO4 electrolytes reveal that K+ of a smaller size can more easily penetrate the inner pores compared with SO42−, while the developed microporosity in HPC is conducive to the penetration of SO42−. Moreover, P-doping leads to a high operation potential of 1.5 V for an HPC-based symmetric supercapacitor, resulting in an enhanced energy density of 16.4 Wh kg−1. Our work provides a feasible strategy to prepare P-doped HPC with a low dosage of phosphorus source and a guide to construct a pore structure suitable for aqueous H2SO4 electrolyte.
- 25 October 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 2838
Open AccessEnhanced Energy Density for P-Doped Hierarchically Porous Carbon-Based Symmetric Supercapacitor with High Operation Potential in Aqueous H2SO4 Electrolyte
Phosphorus-doped hierarchically porous carbon (HPC) is prepared with the assistance of freeze-drying using colloid silica and phytic acid dipotassium salt as a hard template and phosphorus source, respectively. Intensive material characterizations show that the freeze-drying process can effectively promote the porosity of HPC. The specific surface area and P content for HPC can reach up to 892 m2 g−1 and 2.78 at%, respectively. Electrochemical measurements in aqueous KOH and H2SO4 electrolytes reveal that K+ of a smaller size can more easily penetrate the inner pores compared with SO42−, while the developed microporosity in HPC is conducive to the penetration of SO42−. Moreover, P-doping leads to a high operation potential of 1.5 V for an HPC-based symmetric supercapacitor, resulting in an enhanced energy density of 16.4 Wh kg−1. Our work provides a feasible strategy to prepare P-doped HPC with a low dosage of phosphorus source and a guide to construct a pore structure suitable for aqueous H2SO4 electrolyte.
- 1 November 2020
- Published by Elsevier in Electrochimica Acta
- Vol. 360
Heteroatom-doped hierarchical porous carbon via molten-salt method for supercapacitors
- 1 November 2020
- Published by Elsevier in Electrochimica Acta
- Vol. 360
Heteroatom-doped hierarchical porous carbon via molten-salt method for supercapacitors
- Open Access
Nickel-Embedded Carbon Materials Derived from Wheat Flour for Li-Ion Storage
The biomass-based carbons anode materials have drawn significant attention because of admirable electrochemical performance on account of their nontoxicity and abundance resources. Herein, a novel type of nickel-embedded carbon material (nickel@carbon) is prepared by carbonizing the dough which is synthesized by mixing wheat flour and nickel nitrate as anode material in lithium-ion batteries. In the course of the carbonization process, the wheat flour is employed as a carbon precursor, while the nickel nitrate is introduced as both a graphitization catalyst and a pore-forming agent. The in situ formed Ni nanoparticles play a crucial role in catalyzing graphitization and regulating the carbon nanocrystalline structure. Mainly owing to the graphite-like carbon microcrystalline structure and the microporosity structure, the NC-600 sample exhibits a favorable reversible capacity (700.8 mAh g−1 at 0.1 A g−1 after 200 cycles), good rate performance (51.3 mAh g−1 at 20 A g−1), and long-cycling durability (257.25 mAh g−1 at 1 A g−1 after 800 cycles). Hence, this work proposes a promising inexpensive and highly sustainable biomass-based carbon anode material with superior electrochemical properties in LIBs.
Open AccessNickel-Embedded Carbon Materials Derived from Wheat Flour for Li-Ion Storage
The biomass-based carbons anode materials have drawn significant attention because of admirable electrochemical performance on account of their nontoxicity and abundance resources. Herein, a novel type of nickel-embedded carbon material (nickel@carbon) is prepared by carbonizing the dough which is synthesized by mixing wheat flour and nickel nitrate as anode material in lithium-ion batteries. In the course of the carbonization process, the wheat flour is employed as a carbon precursor, while the nickel nitrate is introduced as both a graphitization catalyst and a pore-forming agent. The in situ formed Ni nanoparticles play a crucial role in catalyzing graphitization and regulating the carbon nanocrystalline structure. Mainly owing to the graphite-like carbon microcrystalline structure and the microporosity structure, the NC-600 sample exhibits a favorable reversible capacity (700.8 mAh g−1 at 0.1 A g−1 after 200 cycles), good rate performance (51.3 mAh g−1 at 20 A g−1), and long-cycling durability (257.25 mAh g−1 at 1 A g−1 after 800 cycles). Hence, this work proposes a promising inexpensive and highly sustainable biomass-based carbon anode material with superior electrochemical properties in LIBs.
- 27 December 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (4) , 967-977
Zn-Modified Co@N–C composites with adjusted Co particle size as catalysts for the efficient electroreduction of CO2
The Zn-Co@N–C composites are developed by direct annealing of Zn–Co ZIF materials. The size of Co particles could be adjusted by the introduced Zn species. The activity in CO2RR is gradually improved with the decrease of Co particle size.
- 27 December 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (4) , 967-977
Zn-Modified Co@N–C composites with adjusted Co particle size as catalysts for the efficient electroreduction of CO2
The Zn-Co@N–C composites are developed by direct annealing of Zn–Co ZIF materials. The size of Co particles could be adjusted by the introduced Zn species. The activity in CO2RR is gradually improved with the decrease of Co particle size.
- 1 October 2019
- Published by Elsevier in Journal of Power Sources
- Vol. 438
Stabilizing the high-voltage cycle performance of LiNi0.8Co0.1Mn0.1O2 cathode material by Mg doping
- 1 October 2019
- Published by Elsevier in Journal of Power Sources
- Vol. 438
Stabilizing the high-voltage cycle performance of LiNi0.8Co0.1Mn0.1O2 cathode material by Mg doping