MSMa’eN S. Sari

Ma’eN S. Sari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ma’eN S. Sari has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Forced response of double beams with initial geometric imperfections and connected by a nonlinear elastic layer

    by Ma’EN S. Sari, Ahmad Al-Qaisia

    This study investigates the forced vibrations of double simply supported Euler-Bernoulli beams with initial deflections connected through a distributed linear and nonlinear elastic layer. It is assumed that the upper beam is subjected to a concentrated transverse harmonic force located at its midspan. The integro-partial differential equations of motion are introduced. The Galerkin approach is utilized, and the mode shapes of uniform simply supported beams are used to establish the nonlinear governing equations of motion that incorporate quadratic and cubic nonlinearities. The harmonic balance method (HB) in conjunction with the pseudo arc-length continuation scheme are applied to obtain the amplitude-frequency curves. To assess the accuracy and validity of the proposed method and solution, some findings obtained by the suggested approach have been compared with those found through numerical integration, where a strong concordance was demonstrated. The influences of several factors such as the linear and nonlinear stiffness parameters, and the initial deflections of the beams on the steady state amplitudes have been examined. It is observed that these factors have considerable influences on the dynamic responses of the double beams. For the sake of generality and convenience, the results are displayed in dimensionless forms.

  • Open Access

    Critical buckling load prediction in tapered axially functionally graded nanobeams using machine learning under different boundary conditions

    by Sameer Al-Dahidi, Ma’eN S. Sari

    This study presents a machine learning (ML) framework for predicting the critical buckling loads of tapered axially functionally graded (AFG) nanobeams resting on elastic foundations, governed by Eringen’s nonlocal elasticity theory. Due to their position-dependent stiffness and complex boundary conditions, closed-form solutions for such nanobeams are computationally expensive and analytically intractable. To address this, four supervised data-driven regression models are developed: linear regression (LR), polynomial regression (PR), support vector machine (SVM), and artificial neural network (ANN). These models are used to predict buckling loads for three boundary conditions: clamped–clamped (C–C), simply supported (S-S), and clamped-simply supported (C–S). A comprehensive dataset is generated using a finely discretized parametric sweep of the beam’s geometric and material properties. Pearson correlation coefficient (PCC) and variance inflation factor (VIF) analyses are conducted to ensure feature relevance and independence. Results show that the ANN model consistently outperform other test models, achieving coefficient of determination ( R 2 ) values exceeding 99%, root mean square error (RMSE) values below 1.1 (in normalized units), and mean absolute error (MAE) values below 0.67 (in normalized units) across all boundary conditions. The findings demonstrate that ML and ANN offer a robust and computationally efficient surrogate to traditional methods, with strong generalization capabilities.


  • Open Access

    Nonlinear forced response of non-uniform beams carrying point masses using the harmonic balance method with an arc-length continuation scheme

    by Ma’eN S Sari

    This work examines the forced vibrations of a non-uniform Euler-Bernoulli beam carrying point masses and subjected to a concentrated transverse harmonic force. By the means of Newton’s second law of motion, the integro-partial differential equation of motion is derived. The Galerkin approach is applied, and the normalized mode shapes of the non-uniform base beam are used to derive the nonlinear governing equation of motion that contains cubic and quintic nonlinearities. The method of harmonic balance method (HB) in conjunction with the pseudo arc-length continuation scheme are employed to obtain the amplitude-frequency curves. Non-uniform beams with two different boundary conditions are considered in this study; cantilever and simply supported beams. To examine the accuracy and validity of the proposed method and solution, some results obtained by the suggested approach have been compared with those found through numerical integration, where a good agreement was achieved. The influences of several factors such as the non-uniformity parameter, the magnitude of the point masses, and the boundary conditions on the steady state amplitude have been examined. It is observed that these parameters have significant effects on the dynamic behavior of the non-uniform beams. For generality and convenience, the results are displayed in dimensionless forms.


  • Open Access

    Free vibrations of functionally graded porous hanging and standing cantilever beams

    by Ma’eN S Sari, Shirko Faroughi

    The free oscillations of a functionally graded (FG) porous vertical cantilever beam in the frame work of Euler–Bernoulli beam theory is investigated. The beam is subjected to the gravity-load and the properties of the FG material such as the modulus of elasticity and the density are supposed to change through the thickness of the beam according to power-law relations. The equation of motion is derived using Newton’s second law. The Numerical Chebyshev collocation method is utilized to determine the transverse frequencies of the FG porous hanging and standing cantilever Euler–Bernoulli beams. A parametric study is conducted to determine the effects of various factors such as the transverse functionally graded index, the porosity factor, and the elastic and the mass density ratios on the natural frequencies and the mode shapes of the FG porous vertical hanging and standing cantilever thin beams under their self-weight. The accuracy of the proposed numerical method is evaluated through comparisons of the frequencies obtained from the present approach with those available in previous literature. In general, it was observed that the elastic ratio has a softening impact on the frequencies except for the fundamental frequency which remains constant as the elastic ratio increases. Moreover, the porosity parameter and the power-law index may have a softening or hardening impact on the frequencies, and the behavior of these frequencies depends on the values of the elastic and the mass density ratios.


  • Open Access

    Free Vibrations of Functionally Graded Porous Hanging and Standing Cantilever Beams

    by Ma’En S. Sari, Shirko Faroughi

    The free oscillations of a functionally graded (FG) porous vertical cantilever beam in the frame work of Euler-Bernoulli beam theory. The beam is subjected to the gravity-load and the properties of the FG material such as the modulus of elasticity and the density are supposed to change through the thickness of the beam according to power-law relations. The equation of motion is derived using Newton’s second law. The Numerical Chebyshev collocation method is utilized to determine the transverse frequencies of the FG porous hanging and standing cantilever Euler-Bernoulli beams. A parametric study is conducted to determine the effects of various factors such as the transverse functionally graded index, the porosity factor, and the elastic and the mass density ratios on the natural frequencies and the mode shapes of the FG porous vertical hanging and standing cantilever thin beams under their self-weight. The accuracy of the proposed numerical method is evaluated through comparisons of the frequencies obtained from the present approach with those available in previous literature.

  • Free and forced nonlinear vibrations of Bi-Directional functionally graded Euler–Bernoulli porous beams

    by Ma’en S Sari, Sameer Al-Dahidi, Bashar Hammad

    In this study, the free and forced vibrations of a bi-directional functionally graded porous beam are investigated. The governing equations of motion are derived by Hamilton’s principle, and the reduced temporal equation of motion with cubic and quintic nonlinear terms is obtained using the Galerkin approach. Analytical solutions for the nonlinear natural frequencies in addition to the primary resonance response curves are established by the method of multiple scales. The effects of the axial and transverse functionally graded indexes, initial amplitude, porosity parameter, and the elastic and mass density ratios on the nonlinear frequencies and the forced responses are examined.


  • Open Access

    Natural vibrations of double bi-directional functionally graded Euler–Bernoulli beams connected by a variable Winkler elastic layer

    by Ma’eN S Sari

    The free transverse vibrations of two-dimensional functionally graded double Euler–Bernoulli beam system connected through a variable Winkler elastic layer are presented. The Modulus of elasticity and the density of the material of the beams are assumed to vary along the thickness and the length of the beams according to power-law and exponential functions, respectively. The governing differential equations of motion are established by the means of Hamilton’s principle. The Chebyshev Spectral Collocation Method (CSCM) is used to calculate the natural frequencies of the two-dimensional functionally graded (2D-FG) double beams. The effects of several parameters such as the height ratio of the beams, the stiffness of the coupling layer, the axial and transverse functionally graded indexes, and the boundary conditions on the natural frequencies of the 2D-FG double beams have been investigated. The frequencies obtained from the CSCM have been validated by comparing them with those available in previous literature.


  • Vibration characteristics of multiple functionally graded nonuniform beams

    by Ma’eN S Sari, Sameer Al-Dahidi

    Based on the Euler–Bernoulli beam theory, the natural vibration behavior of functionally graded nonuniform multiple beams has been investigated. It is assumed that the beams are joined by elastic translational springs, and the properties of the beams vary along the axial direction. The Chebyshev spectral collocation method has been used to convert the governing differential equations of transverse motion into a system of algebraic equations that are put in the matrix–vector form. Then, the dimensionless transverse frequencies are obtained by solving the eigenvalue problem. The influence of several factors, such as the stiffness parameters of the coupling translational springs, the properties of the cross section of the beams, and the boundary conditions on the frequencies, has been carried out. The results generated from the Chebyshev spectral collocation method have been verified by comparing them with those reported in other studies and references from the literature. Several numerical examples have been presented and discussed to analyze the system under consideration. The authors hope that the findings of the current study are helpful in designing and characterizing multiple nonuniform thin engineering structures.