Zhuang Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhuang Lin has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Ping Li
Xi'an Jiaotong University
5 shared publications - Fei Liu
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
3 shared publications - XinLong Zhang
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
3 shared publications Ping Li
College of Shipbuilding Engineering, Harbin Engineering University, Harbin, China
2 shared publications- Simone Mancini
Department of Industrial Engineering, University of Naples Federico II, via Claudio 21, 80125 Napoli, Italy
2 shared publications - Yue Dong
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
2 shared publications
Latest Publications
- 1 October 2023
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 154 (4) , 2609-2624
Sound transmission across locally resonant honeycomb sandwich meta-structures with large spatial periodicity
Honeycomb sandwich structures have been widely used in the field of engineering owing to their outstanding mechanical properties. However, for a honeycomb sandwich structure with large spatial periodicity, there is a low-frequency sound insulation valley. Here, the sound transmission across locally resonant honeycomb sandwich meta-structures was investigated to overcome this sound-insulation valley. An analytical model was developed based on the space-harmonic approach and the low-frequency sound insulation valley was determined analytically and numerically. The results indicate that the resonator distributed at the center of the face panel has a significant impact on the sound transmission performance of the honeycomb sandwich structure, whereas the resonator distributed on the wall of the honeycomb core does not contribute to overcoming this sound-insulation valley. Based on the research results, a design strategy for overcoming this sound-insulation valley was determined by tuning the damping parameter and constructing graded resonators. Moreover, sound transmission under the excitation of oblique incidence sound waves was also investigated. Compared with the method of filling porous materials, the proposed design method is more effective, and more importantly, the mass of the resonator is only 1.23% of that of the porous materials.
- 1 October 2023
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 154 (4) , 2609-2624
Sound transmission across locally resonant honeycomb sandwich meta-structures with large spatial periodicity
Honeycomb sandwich structures have been widely used in the field of engineering owing to their outstanding mechanical properties. However, for a honeycomb sandwich structure with large spatial periodicity, there is a low-frequency sound insulation valley. Here, the sound transmission across locally resonant honeycomb sandwich meta-structures was investigated to overcome this sound-insulation valley. An analytical model was developed based on the space-harmonic approach and the low-frequency sound insulation valley was determined analytically and numerically. The results indicate that the resonator distributed at the center of the face panel has a significant impact on the sound transmission performance of the honeycomb sandwich structure, whereas the resonator distributed on the wall of the honeycomb core does not contribute to overcoming this sound-insulation valley. Based on the research results, a design strategy for overcoming this sound-insulation valley was determined by tuning the damping parameter and constructing graded resonators. Moreover, sound transmission under the excitation of oblique incidence sound waves was also investigated. Compared with the method of filling porous materials, the proposed design method is more effective, and more importantly, the mass of the resonator is only 1.23% of that of the porous materials.
- 18 October 2021
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 29 (27) , 6694-6704
Dynamic crushing behavior of multi-layered hybrid foam-filled composite graded lattice sandwich panels
The research and development of novel protective structures with excellent mechanical load-bearing and energy-absorbing characteristics are one of the current interests in aerospace, marine, and automobile industries. In this research, we fabricate foam-filled multi-layered hybrid composite graded lattice sandwich panels (MHCGLSPs) with different configurations and investigate their dynamic response characteristics experimentally and numerically. The influences of strain rate, relative density, filled foam, and graded arrangement on the crushing behavior of the present panels are depicted, and three main failure modes including core buckling (CB), facesheet breakage (FB), and polyurethane foam breakage (PB) are revealed. Furthermore, the numerical results obtained by finite element models based on the Hashin failure criterion and Johnson–Cook model are in good agreement with the experimental results. It is shown that all the present MHCGLSPs possess excellent energy absorption performance, and the non-graded specimens and gradually weaker specimens possess better ultimate load-bearing capacity under the premise of equal relative density, which can provide guideline for further studies on the novel multi-layered protective structures.
- 18 October 2021
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 29 (27) , 6694-6704
Dynamic crushing behavior of multi-layered hybrid foam-filled composite graded lattice sandwich panels
The research and development of novel protective structures with excellent mechanical load-bearing and energy-absorbing characteristics are one of the current interests in aerospace, marine, and automobile industries. In this research, we fabricate foam-filled multi-layered hybrid composite graded lattice sandwich panels (MHCGLSPs) with different configurations and investigate their dynamic response characteristics experimentally and numerically. The influences of strain rate, relative density, filled foam, and graded arrangement on the crushing behavior of the present panels are depicted, and three main failure modes including core buckling (CB), facesheet breakage (FB), and polyurethane foam breakage (PB) are revealed. Furthermore, the numerical results obtained by finite element models based on the Hashin failure criterion and Johnson–Cook model are in good agreement with the experimental results. It is shown that all the present MHCGLSPs possess excellent energy absorption performance, and the non-graded specimens and gradually weaker specimens possess better ultimate load-bearing capacity under the premise of equal relative density, which can provide guideline for further studies on the novel multi-layered protective structures.
- 17 February 2020
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 25 (4) , 1151-1165
A numerical investigation on the effect of symmetric and asymmetric flooding on the damage stability of a ship
- 17 February 2020
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 25 (4) , 1151-1165
A numerical investigation on the effect of symmetric and asymmetric flooding on the damage stability of a ship
- Open Access
- 23 December 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (1) , 11
Numerical Investigation into the Effect of Damage Openings on Ship Hydrodynamics by the Overset Mesh Technique
Damage stability is difficult to assess due to the complex hydrodynamic phenomena regarding interactions between fluid and structures. Therefore, a detailed analysis of the flooding progression and motion responses is important for improving ship safety. In this paper, numerical simulations are performed on the damaged DTMB 5415 ship at zero speed. All calculation are carried out using CD Adapco Star CCM + software, investigating the effect of damage openings on ship hydrodynamics, including the side damage and the bottom damage. The computational domain is modelled by the overset mesh and solved using the unsteady Reynold-average Navier-Stokes (URANS) solver. An implicit solver is used to find the field of all hydrodynamics unknown quantities, in conjunction with an iterative solver to solve each time step. The Volume of Fluid (VOF) method is applied to visualize the flooding process and capture the complex hydrodynamics behaviors. The simulation results indicated that two damage locations produce the characteristic flooding processes, and the motion responses corresponding to the hydrodynamic behaviors are different. Through comparative analysis, due to the difference between the horizontal impact on the longitudinal bulkhead and the vertical impact on the bottom plate, the bottom damage scenario always has a larger heel angle than the side damage scenario in the same period. However, the pitch motions are basically consistent. Generally, the visualization of the flooding process is efficient to explain the causes of the motion responses. Also, when the damage occurs, regardless of the bottom damage or the side damage, the excessive heel angle due to asymmetric flooding is often a threat to ship survivability with respect to the pitch angle.
- 23 December 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (1) , 11
Open AccessNumerical Investigation into the Effect of Damage Openings on Ship Hydrodynamics by the Overset Mesh Technique
Damage stability is difficult to assess due to the complex hydrodynamic phenomena regarding interactions between fluid and structures. Therefore, a detailed analysis of the flooding progression and motion responses is important for improving ship safety. In this paper, numerical simulations are performed on the damaged DTMB 5415 ship at zero speed. All calculation are carried out using CD Adapco Star CCM + software, investigating the effect of damage openings on ship hydrodynamics, including the side damage and the bottom damage. The computational domain is modelled by the overset mesh and solved using the unsteady Reynold-average Navier-Stokes (URANS) solver. An implicit solver is used to find the field of all hydrodynamics unknown quantities, in conjunction with an iterative solver to solve each time step. The Volume of Fluid (VOF) method is applied to visualize the flooding process and capture the complex hydrodynamics behaviors. The simulation results indicated that two damage locations produce the characteristic flooding processes, and the motion responses corresponding to the hydrodynamic behaviors are different. Through comparative analysis, due to the difference between the horizontal impact on the longitudinal bulkhead and the vertical impact on the bottom plate, the bottom damage scenario always has a larger heel angle than the side damage scenario in the same period. However, the pitch motions are basically consistent. Generally, the visualization of the flooding process is efficient to explain the causes of the motion responses. Also, when the damage occurs, regardless of the bottom damage or the side damage, the excessive heel angle due to asymmetric flooding is often a threat to ship survivability with respect to the pitch angle.
- Open Access
- 5 November 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (11) , 392
Numerical Investigation on the Scale Effect of a Stepped Planing Hull
This article discusses the scale effects on a planing boat, utilizing the computational fluid dynamics method. The simulation is compared with a tank test for verification and validation. The planing boat sails use both aerodynamics and hydrodynamics. Studying the performances and wave patterns of different dimensions of the models is the best way to investigate the scale effect without using experimental data. The resistance is discussed in two parts, namely residuary resistance and friction resistance, and is compared to the calculated data using the international towing tank conference (ITTC) formula. The computational fluid dynamics (CFD) calculations of the model are increased by 4.77% on average, and the boat computations are also increased by 3.57%. The computation shows the scale effect in detail. The residuary resistance coefficients at different scales are approximately equal, and the friction resistance coefficients show the scale effect. The scale effect for longitudinal steadiness is also captured for the period of the porpoising behavior. The rational for the full-scaled boat oscillation period and the model is the root of the scales.
- 5 November 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (11) , 392
Open AccessNumerical Investigation on the Scale Effect of a Stepped Planing Hull
This article discusses the scale effects on a planing boat, utilizing the computational fluid dynamics method. The simulation is compared with a tank test for verification and validation. The planing boat sails use both aerodynamics and hydrodynamics. Studying the performances and wave patterns of different dimensions of the models is the best way to investigate the scale effect without using experimental data. The resistance is discussed in two parts, namely residuary resistance and friction resistance, and is compared to the calculated data using the international towing tank conference (ITTC) formula. The computational fluid dynamics (CFD) calculations of the model are increased by 4.77% on average, and the boat computations are also increased by 3.57%. The computation shows the scale effect in detail. The residuary resistance coefficients at different scales are approximately equal, and the friction resistance coefficients show the scale effect. The scale effect for longitudinal steadiness is also captured for the period of the porpoising behavior. The rational for the full-scaled boat oscillation period and the model is the root of the scales.
- Open Access
- 10 July 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (7) , 211
A Numerical Investigation on the Flooding Process of Multiple Compartments Based on the Volume of Fluid Method
A detailed description of the flooding process is crucial to analyze the complex hydrodynamic behaviors and enhance the survivability of the damaged ship. In this paper, through establishing three typical damage scenarios with various locations, the commercial software CD Adapco STAR-CCM+ based on the Reynolds-Averaged Navier-Stokes (RANS) solver is applied to simulate the flooding process involving multiple compartments. The basic computational fluid dynamics (CFD) models and specific simulation settings are elaborated. The volume of fluid (VOF) method combined with the user defined field function is developed to distribute the initial free surface. The captured flooding process indicates that the air compression due to the restricted ventilation decreases the flooding amount. The obtained flooding time can provide necessary data to support for appropriate rescue management and evacuation options.
- 10 July 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (7) , 211
Open AccessA Numerical Investigation on the Flooding Process of Multiple Compartments Based on the Volume of Fluid Method
A detailed description of the flooding process is crucial to analyze the complex hydrodynamic behaviors and enhance the survivability of the damaged ship. In this paper, through establishing three typical damage scenarios with various locations, the commercial software CD Adapco STAR-CCM+ based on the Reynolds-Averaged Navier-Stokes (RANS) solver is applied to simulate the flooding process involving multiple compartments. The basic computational fluid dynamics (CFD) models and specific simulation settings are elaborated. The volume of fluid (VOF) method combined with the user defined field function is developed to distribute the initial free surface. The captured flooding process indicates that the air compression due to the restricted ventilation decreases the flooding amount. The obtained flooding time can provide necessary data to support for appropriate rescue management and evacuation options.
- Open Access
Time Domain Simulation of Damage Flooding Considering Air Compression Characteristics
An accurate analysis of the entire flooding process is critical to assess the damaged stability when a ship encounters distressed accidents such as collision, stranding, or grounding. Among many factors affecting the flooding process and damaged stability, the complex effect of air compression is significant and worthy of further research. In this paper, through establishing scenarios of the damage flooding for a cruise ship, the commercial software CD Adapco STARCCM+ is applied to perform time domain simulation of flooding processes under different ventilation levels. The basic mathematical models about air compression and specific simulation settings of computational fluid dynamics (CFD) are presented in detail. The simulation results show that water ingression results in an increase of air pressure and density inside the flooded compartment. The corresponding air compression can significantly delay the flooding process if the ventilation level is limited to a certain ratio. Finally, the stability of the damaged ship is affected.
Open AccessTime Domain Simulation of Damage Flooding Considering Air Compression Characteristics
An accurate analysis of the entire flooding process is critical to assess the damaged stability when a ship encounters distressed accidents such as collision, stranding, or grounding. Among many factors affecting the flooding process and damaged stability, the complex effect of air compression is significant and worthy of further research. In this paper, through establishing scenarios of the damage flooding for a cruise ship, the commercial software CD Adapco STARCCM+ is applied to perform time domain simulation of flooding processes under different ventilation levels. The basic mathematical models about air compression and specific simulation settings of computational fluid dynamics (CFD) are presented in detail. The simulation results show that water ingression results in an increase of air pressure and density inside the flooded compartment. The corresponding air compression can significantly delay the flooding process if the ventilation level is limited to a certain ratio. Finally, the stability of the damaged ship is affected.
- Open Access
A Study on the Motion of Partial Air Cushion Support Catamaran in Regular Head Waves
In this paper, the motion of partial air cushion support catamaran (PACSCAT) sailing in regular waves was firstly investigated by the experimental method. The monitored histories of heave, pitch, midship acceleration, and air cushion pressure in towing tests are performed to analyze the influence of air cushion on the periodicity feature of hull body motion. Subsequently, using the finite volume method (FVM)-based CFD software Star-ccm, numerical simulations are carried out for the PACSCAT model with a simplification of the air cushion system. The detailed flow information of wave evolution, pressure, and velocity distribution is investigated. The calculated oscillation characteristics of different motion parameters are compared with those from experiment and show good agreement. The numerical method also has good capacity in the prediction of amplitude response of heave and midship acceleration; however, large error is found when calculating resistance and amplitude response of pitch.
Open AccessA Study on the Motion of Partial Air Cushion Support Catamaran in Regular Head Waves
In this paper, the motion of partial air cushion support catamaran (PACSCAT) sailing in regular waves was firstly investigated by the experimental method. The monitored histories of heave, pitch, midship acceleration, and air cushion pressure in towing tests are performed to analyze the influence of air cushion on the periodicity feature of hull body motion. Subsequently, using the finite volume method (FVM)-based CFD software Star-ccm, numerical simulations are carried out for the PACSCAT model with a simplification of the air cushion system. The detailed flow information of wave evolution, pressure, and velocity distribution is investigated. The calculated oscillation characteristics of different motion parameters are compared with those from experiment and show good agreement. The numerical method also has good capacity in the prediction of amplitude response of heave and midship acceleration; however, large error is found when calculating resistance and amplitude response of pitch.
- Open Access
- 1 December 2018
- Published by IOP Publishing in Journal of Statistical Mechanics: Theory and Experiment
- Vol. 2018 (12) , 123405
Agent-based evacuation model incorporating life jacket retrieval and counterflow avoidance behavior for passenger ships
View the article online for updates and enhancements.
- 1 December 2018
- Published by IOP Publishing in Journal of Statistical Mechanics: Theory and Experiment
- Vol. 2018 (12) , 123405
Open AccessAgent-based evacuation model incorporating life jacket retrieval and counterflow avoidance behavior for passenger ships
View the article online for updates and enhancements.
- Open Access
- 1 January 2018
- Published by Wiley in Shock and Vibration
- Vol. 2018 (1)
A Modified Fourier–Ritz Formulation for Vibration Analysis of Arbitrarily Restrained Rectangular Plate with Cutouts
A modified Fourier–Ritz method is developed for the flexural and in‐plane vibration analysis of plates with two rectangular cutouts with arbitrary boundary conditions, aiming to provide a unified solving process for cases that the plate has various locations or sizes of cutout, and different kinds of boundary conditions. Under the current framework, modifying the position of the cutout or the boundary conditions of the plate is just as changing the geometric parameters of the plate, and there is no need to change the solution procedures. The arbitrary boundary conditions can be obtained by setting the stiffness constant of the boundary springs which are fixed uniformly along the edges of the plate at proper values. The strain and kinetic energy functions of a plate with rectangular cutout are derived in detail. The convergence and accuracy of the present method are demonstrated by comparing the present results with those obtained from the FEM software. In this paper, free in‐plane and flexural vibration characteristics of the plate with rectangular cutout under general boundary conditions are studied. From the results, it can be found that the geometric parameters and positions of the cutout and the boundary conditions of the plate will obviously influence the natural vibration characteristics of the structures.
- 1 January 2018
- Published by Wiley in Shock and Vibration
- Vol. 2018 (1)
Open AccessA Modified Fourier–Ritz Formulation for Vibration Analysis of Arbitrarily Restrained Rectangular Plate with Cutouts
A modified Fourier–Ritz method is developed for the flexural and in‐plane vibration analysis of plates with two rectangular cutouts with arbitrary boundary conditions, aiming to provide a unified solving process for cases that the plate has various locations or sizes of cutout, and different kinds of boundary conditions. Under the current framework, modifying the position of the cutout or the boundary conditions of the plate is just as changing the geometric parameters of the plate, and there is no need to change the solution procedures. The arbitrary boundary conditions can be obtained by setting the stiffness constant of the boundary springs which are fixed uniformly along the edges of the plate at proper values. The strain and kinetic energy functions of a plate with rectangular cutout are derived in detail. The convergence and accuracy of the present method are demonstrated by comparing the present results with those obtained from the FEM software. In this paper, free in‐plane and flexural vibration characteristics of the plate with rectangular cutout under general boundary conditions are studied. From the results, it can be found that the geometric parameters and positions of the cutout and the boundary conditions of the plate will obviously influence the natural vibration characteristics of the structures.