Jing Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jing Cao has a total of 328 co-authors. Here are the top co-authors by number of shared publications:
Xijiao Mu
State Key Laboratory of Natural Product Chemistry Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province College of Chemistry and Chemical Engineering Lanzhou University Lanzhou P. R. China
32 shared publications- Yu Tang
Lanzhou University
26 shared publications Guo‐Bin Xiao
State Key Laboratory of Natural Product Chemistry Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province College of Chemistry and Chemical Engineering Lanzhou University Lanzhou P. R. China
19 shared publicationsYu Tang
14 shared publications- Weisheng Liu
Lanzhou University
13 shared publications Changfu Shan
State Key Laboratory of Applied Organic Chemistry, Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province, College of Chemistry and Chemical Engineering, Lanzhou University, Lanzhou 730000, P. R. China
11 shared publications
Latest Publications
- Open Access
- 31 October 2026
- Published by Springer Nature in Nature Communications
High-performance devices from lab-scale to micro module directed by vertical PbI2 homogeneous growth perovskite films
The morphology of the initial PbI 2 film is very pivotal in dictating the uniformity and crystallinity of the resultant perovskite film in the two-step sequential deposition processes. A solution-based induction is introduced to transform PbI 2 clusters into PbI 2 nanowires to achieve controllable morphology of the PbI 2 film. The nanowires act as scaffolds for the subsequent perovskite formation. An in-plane low-angle diffraction detected in the in-situ grazing-incidence small-angle X-ray scattering (GISAXS) for the PbI 2 film indicates the formation of a periodically arranged ordered structure. The PbI 2 nanowires facilitate the ion-exchange process, markedly improving the homogeneity and orientation of the perovskite films, which is confirmed by the in-situ grazing-incidence wide-angle X-ray scattering (GIWAXS). As a result, a champion power conversion efficiency (PCE) of 26.94% (certified as 26.66%, a very high certification efficiency of n-i-p structured perovskite devices) is achieved for the laboratory area (aperture area of the mask is 0.0618 cm 2 ). Moreover, a micro module device with an aperture area of 21.54 cm 2 was successfully manufactured and achieved a PCE of 24.60% (certified as 24.02%).
- 31 October 2026
- Published by Springer Nature in Nature Communications
Open AccessHigh-performance devices from lab-scale to micro module directed by vertical PbI2 homogeneous growth perovskite films
The morphology of the initial PbI 2 film is very pivotal in dictating the uniformity and crystallinity of the resultant perovskite film in the two-step sequential deposition processes. A solution-based induction is introduced to transform PbI 2 clusters into PbI 2 nanowires to achieve controllable morphology of the PbI 2 film. The nanowires act as scaffolds for the subsequent perovskite formation. An in-plane low-angle diffraction detected in the in-situ grazing-incidence small-angle X-ray scattering (GISAXS) for the PbI 2 film indicates the formation of a periodically arranged ordered structure. The PbI 2 nanowires facilitate the ion-exchange process, markedly improving the homogeneity and orientation of the perovskite films, which is confirmed by the in-situ grazing-incidence wide-angle X-ray scattering (GIWAXS). As a result, a champion power conversion efficiency (PCE) of 26.94% (certified as 26.66%, a very high certification efficiency of n-i-p structured perovskite devices) is achieved for the laboratory area (aperture area of the mask is 0.0618 cm 2 ). Moreover, a micro module device with an aperture area of 21.54 cm 2 was successfully manufactured and achieved a PCE of 24.60% (certified as 24.02%).
- Open Access
- 20 October 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (20) , e71144
Interfacial Support Effects in Load‐Bearing Iridium Electrocatalysts for PEM Water Electrolysis: A Review
Proton exchange membrane water electrolysis (PEMWE) is one of the core technologies for green hydrogen production. However, issues such as the slow kinetics of the anodic oxygen evolution reaction (OER) in acidic media and poor electrode material stability limit improvements in this technology's efficiency and large‐scale application. Iridium‐based materials, as standard catalysts, still face key challenges, including high cost and insufficient activity. Recent research on support‐based iridium catalysts has made significant progress. Various structural forms of supported catalysts have been designed, effectively reducing iridium usage while maintaining catalytic activity. This paper reviews various support‐based iridium catalyst systems, analyzes the interaction mechanisms between the support and iridium metal, explores how these interactions regulate the reaction mechanism, and provides insights for the development of efficient and economical PEMWE systems.
- 20 October 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (20) , e71144
Open AccessInterfacial Support Effects in Load‐Bearing Iridium Electrocatalysts for PEM Water Electrolysis: A Review
Proton exchange membrane water electrolysis (PEMWE) is one of the core technologies for green hydrogen production. However, issues such as the slow kinetics of the anodic oxygen evolution reaction (OER) in acidic media and poor electrode material stability limit improvements in this technology's efficiency and large‐scale application. Iridium‐based materials, as standard catalysts, still face key challenges, including high cost and insufficient activity. Recent research on support‐based iridium catalysts has made significant progress. Various structural forms of supported catalysts have been designed, effectively reducing iridium usage while maintaining catalytic activity. This paper reviews various support‐based iridium catalyst systems, analyzes the interaction mechanisms between the support and iridium metal, explores how these interactions regulate the reaction mechanism, and provides insights for the development of efficient and economical PEMWE systems.
- Open Access
- 11 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Mitigating tin ion migration and reinforcing buried interface via synergistic polymer-modified tin oxide
The buried interface between the charge transport layer and the overlying perovskite absorber is critical yet difficult to probe in perovskite solar cells. Because light enters through the transparent substrate and is predominantly absorbed near this region, photo-induced degradation processes are partially initiated at the hidden buried interface. Here, we reveal that instability at the buried SnO 2 /perovskite interface triggers structural and chemical decomposition of the perovskite layer. To address this issue, we introduce polymeric interlayers that simultaneously reinforce interfacial bonding and suppress tin-ion migration. Poly(1-ethenylpyrrolidine-2,5-dione) (PED) forms a robust and chemically compatible interface, yielding enhanced phase purity, reduced defect density, and significantly mitigated tin diffusion. These findings identify the buried SnO 2 /perovskite interface as a key degradation-sensitive region under light aging and highlight interfacial polymer design as an effective strategy for improving the intrinsic stability of perovskite photovoltaics.
- 11 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessMitigating tin ion migration and reinforcing buried interface via synergistic polymer-modified tin oxide
The buried interface between the charge transport layer and the overlying perovskite absorber is critical yet difficult to probe in perovskite solar cells. Because light enters through the transparent substrate and is predominantly absorbed near this region, photo-induced degradation processes are partially initiated at the hidden buried interface. Here, we reveal that instability at the buried SnO 2 /perovskite interface triggers structural and chemical decomposition of the perovskite layer. To address this issue, we introduce polymeric interlayers that simultaneously reinforce interfacial bonding and suppress tin-ion migration. Poly(1-ethenylpyrrolidine-2,5-dione) (PED) forms a robust and chemically compatible interface, yielding enhanced phase purity, reduced defect density, and significantly mitigated tin diffusion. These findings identify the buried SnO 2 /perovskite interface as a key degradation-sensitive region under light aging and highlight interfacial polymer design as an effective strategy for improving the intrinsic stability of perovskite photovoltaics.
- 16 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (39) , e8080769
A Multidentate Coordination Complex‐Based Self‐Assembled Monolayer Stabilizes Perovskite Interface
Self‐assembled monolayers (SAMs) have emerged as promising hole‐selective contacts for buried‐interface engineering in inverted perovskite photovoltaics. However, most reported SAMs rely on a single phosphonic‐acid anchoring group, which is prone to desorption during device fabrication and operation. In addition, their limited affinity for perovskite precursors often leads to poor wettability and non‐ideal interfacial film formation. Here, we report a multidentate Fe(III) porphyrin complex as a co‐SAM component that simultaneously reinforces substrate anchoring and promotes interfacial coupling with the perovskite, thereby stabilizing the buried interface. The four phosphonic‐acid groups on porphyrin enable robust tetradentate chelation with the oxide substrate, increasing the adsorption energy by more than threefold. Meanwhile, the Fe center stabilizes the axial chloride ligand, which interacts with perovskite precursor, increases the apparent surface energy by ∼30%, and reduces the contact angle by ∼40%, thereby promoting high‐quality perovskite crystallization. As a result, small‐area devices achieve a power conversion efficiency of 27.06% (certified 26.82%), while perovskite modules deliver 24.1% efficiency over a 21.54 cm 2 aperture area, together with substantially improved operational stability. These results establish coordination‐complex‐based SAMs as an effective platform for stabilizing buried interfaces in perovskite photovoltaics.
- 16 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (39) , e8080769
A Multidentate Coordination Complex‐Based Self‐Assembled Monolayer Stabilizes Perovskite Interface
Self‐assembled monolayers (SAMs) have emerged as promising hole‐selective contacts for buried‐interface engineering in inverted perovskite photovoltaics. However, most reported SAMs rely on a single phosphonic‐acid anchoring group, which is prone to desorption during device fabrication and operation. In addition, their limited affinity for perovskite precursors often leads to poor wettability and non‐ideal interfacial film formation. Here, we report a multidentate Fe(III) porphyrin complex as a co‐SAM component that simultaneously reinforces substrate anchoring and promotes interfacial coupling with the perovskite, thereby stabilizing the buried interface. The four phosphonic‐acid groups on porphyrin enable robust tetradentate chelation with the oxide substrate, increasing the adsorption energy by more than threefold. Meanwhile, the Fe center stabilizes the axial chloride ligand, which interacts with perovskite precursor, increases the apparent surface energy by ∼30%, and reduces the contact angle by ∼40%, thereby promoting high‐quality perovskite crystallization. As a result, small‐area devices achieve a power conversion efficiency of 27.06% (certified 26.82%), while perovskite modules deliver 24.1% efficiency over a 21.54 cm 2 aperture area, together with substantially improved operational stability. These results establish coordination‐complex‐based SAMs as an effective platform for stabilizing buried interfaces in perovskite photovoltaics.
- 16 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (39) , e8080769
A Multidentate Coordination Complex‐Based Self‐Assembled Monolayer Stabilizes Perovskite Interface
Self‐assembled monolayers (SAMs) have emerged as promising hole‐selective contacts for buried‐interface engineering in inverted perovskite photovoltaics. However, most reported SAMs rely on a single phosphonic‐acid anchoring group, which is prone to desorption during device fabrication and operation. In addition, their limited affinity for perovskite precursors often leads to poor wettability and non‐ideal interfacial film formation. Here, we report a multidentate Fe(III) porphyrin complex as a co‐SAM component that simultaneously reinforces substrate anchoring and promotes interfacial coupling with the perovskite, thereby stabilizing the buried interface. The four phosphonic‐acid groups on porphyrin enable robust tetradentate chelation with the oxide substrate, increasing the adsorption energy by more than threefold. Meanwhile, the Fe center stabilizes the axial chloride ligand, which interacts with perovskite precursor, increases the apparent surface energy by ∼30%, and reduces the contact angle by ∼40%, thereby promoting high‐quality perovskite crystallization. As a result, small‐area devices achieve a power conversion efficiency of 27.06% (certified 26.82%), while perovskite modules deliver 24.1% efficiency over a 21.54 cm 2 aperture area, together with substantially improved operational stability. These results establish coordination‐complex‐based SAMs as an effective platform for stabilizing buried interfaces in perovskite photovoltaics.
- 16 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (39) , e8080769
A Multidentate Coordination Complex‐Based Self‐Assembled Monolayer Stabilizes Perovskite Interface
Self‐assembled monolayers (SAMs) have emerged as promising hole‐selective contacts for buried‐interface engineering in inverted perovskite photovoltaics. However, most reported SAMs rely on a single phosphonic‐acid anchoring group, which is prone to desorption during device fabrication and operation. In addition, their limited affinity for perovskite precursors often leads to poor wettability and non‐ideal interfacial film formation. Here, we report a multidentate Fe(III) porphyrin complex as a co‐SAM component that simultaneously reinforces substrate anchoring and promotes interfacial coupling with the perovskite, thereby stabilizing the buried interface. The four phosphonic‐acid groups on porphyrin enable robust tetradentate chelation with the oxide substrate, increasing the adsorption energy by more than threefold. Meanwhile, the Fe center stabilizes the axial chloride ligand, which interacts with perovskite precursor, increases the apparent surface energy by ∼30%, and reduces the contact angle by ∼40%, thereby promoting high‐quality perovskite crystallization. As a result, small‐area devices achieve a power conversion efficiency of 27.06% (certified 26.82%), while perovskite modules deliver 24.1% efficiency over a 21.54 cm 2 aperture area, together with substantially improved operational stability. These results establish coordination‐complex‐based SAMs as an effective platform for stabilizing buried interfaces in perovskite photovoltaics.
- 19 May 2026
- Published by Elsevier in Science Bulletin
- Vol. 71 (13) , 3263-3267
Interfacial toughening via S8@C60 for high-performance inverted perovskite solar cells
- 19 May 2026
- Published by Elsevier in Science Bulletin
- Vol. 71 (13) , 3263-3267
Interfacial toughening via S8@C60 for high-performance inverted perovskite solar cells
- 4 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (32) , e73286
Interface‐Triggered Bulk Electrical Coupling in SnO 2 via Mesoscopic Chemical Reconfiguration for Scalable, High‐Efficiency Perovskite Photovoltaics
The efficiency and stability of n‐i‐p PSCs are often hindered by energy losses and defect‐induced interfacial failure, fundamentally stemming from mesoscopic surface chemical mismatch in SnO 2 nanocrystals. Herein, we propose a surface reconstruction strategy utilizing in situ generated [Al(OH) 4 ] − ions to rebuild the surface electrical double layer. This approach not only yields monodisperse, highly stable SnO 2 colloids but also synergistically passivates deep‐level defects arising from hydroxyl groups and oxygen vacancy clusters. The resulting amorphous Sn‐AlO x layer induces a surface electrostatic potential, significantly enhancing electrical coupling within the ETL bulk and establishing a robust carrier transport pathway. Consequently, we achieved champion efficiencies of 26.70% (certified 26.64%) for small‐area cells and 24.56% (certified 24.22%) for mini‐modules (21.50 cm 2 ). Notably, fully blade‐coated large‐area modules (65 cm 2 ) reached a high efficiency of 21.91%. By eliminating reactive sites at the buried interface, the unencapsulated devices retained 93% of their initial efficiency after 1100 h of MPPT (ISOS‐L‐2) and demonstrated a T 90 lifetime exceeding 700 h at 85°C (ISOS‐D‐2). This study provides novel insights for the large‐scale production application of SnO 2 sol‐gel in n‐i‐p perovskite solar modules.
- 4 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (32) , e73286
Interface‐Triggered Bulk Electrical Coupling in SnO 2 via Mesoscopic Chemical Reconfiguration for Scalable, High‐Efficiency Perovskite Photovoltaics
The efficiency and stability of n‐i‐p PSCs are often hindered by energy losses and defect‐induced interfacial failure, fundamentally stemming from mesoscopic surface chemical mismatch in SnO 2 nanocrystals. Herein, we propose a surface reconstruction strategy utilizing in situ generated [Al(OH) 4 ] − ions to rebuild the surface electrical double layer. This approach not only yields monodisperse, highly stable SnO 2 colloids but also synergistically passivates deep‐level defects arising from hydroxyl groups and oxygen vacancy clusters. The resulting amorphous Sn‐AlO x layer induces a surface electrostatic potential, significantly enhancing electrical coupling within the ETL bulk and establishing a robust carrier transport pathway. Consequently, we achieved champion efficiencies of 26.70% (certified 26.64%) for small‐area cells and 24.56% (certified 24.22%) for mini‐modules (21.50 cm 2 ). Notably, fully blade‐coated large‐area modules (65 cm 2 ) reached a high efficiency of 21.91%. By eliminating reactive sites at the buried interface, the unencapsulated devices retained 93% of their initial efficiency after 1100 h of MPPT (ISOS‐L‐2) and demonstrated a T 90 lifetime exceeding 700 h at 85°C (ISOS‐D‐2). This study provides novel insights for the large‐scale production application of SnO 2 sol‐gel in n‐i‐p perovskite solar modules.
- 2 April 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (8) , 1159-1168
A synthetically tailored conjugated polymer for thermal and charge management in perovskite interfaces
- 2 April 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (8) , 1159-1168
A synthetically tailored conjugated polymer for thermal and charge management in perovskite interfaces
- Open Access
- 17 March 2026
- Published by Springer Nature in Research Square
Mitigating tin ion migration and reinforcing buried interface via synergistic polymer-modified tin oxide
The buried interface between charge transport layer and the overlying perovskite absorber is critical yet difficult to probe in perovskite solar cells. Because light enters through the transparent substrate and is predominantly absorbed near this region, photo-induced degradation processes are most likely initiated at hidden buried interface. Here, we reveal that instability at the buried SnO2/perovskite interface triggers structural and chemical decomposition of the perovskite layer. To address this issue, we introduce polymeric interlayers that simultaneously reinforce interfacial bonding and suppress tin-ion migration. Poly(1-ethenylpyrrolidine-2,5-dione) (PED) forms the most robust and chemically compatible interface, yielding enhanced phase purity, reduced defect density, and significantly mitigated tin diffusion. These findings identify the buried interface as the primary origin of perovskite degradation and highlight interfacial polymer design as an effective strategy for achieving intrinsically stable perovskite photovoltaics.
- 17 March 2026
- Published by Springer Nature in Research Square
Open AccessMitigating tin ion migration and reinforcing buried interface via synergistic polymer-modified tin oxide
The buried interface between charge transport layer and the overlying perovskite absorber is critical yet difficult to probe in perovskite solar cells. Because light enters through the transparent substrate and is predominantly absorbed near this region, photo-induced degradation processes are most likely initiated at hidden buried interface. Here, we reveal that instability at the buried SnO2/perovskite interface triggers structural and chemical decomposition of the perovskite layer. To address this issue, we introduce polymeric interlayers that simultaneously reinforce interfacial bonding and suppress tin-ion migration. Poly(1-ethenylpyrrolidine-2,5-dione) (PED) forms the most robust and chemically compatible interface, yielding enhanced phase purity, reduced defect density, and significantly mitigated tin diffusion. These findings identify the buried interface as the primary origin of perovskite degradation and highlight interfacial polymer design as an effective strategy for achieving intrinsically stable perovskite photovoltaics.
- 9 March 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (16)
Water‐Cluster–Mediated Amorphous‐to‐Crystalline Transition Enables Scalable Fabrication of Stable Surfactant‐Free MOF Nanocatalyst
Metal–organic framework (MOF) nanocatalysts are promising for solar‐to‐chemical conversion but often suffer hydrolytic degradation, especially in surfactant‐free, highly surface‐active forms. Here, we report a dual‐functional design that integrates amorphous nanostructuring with water‐triggered self‐coordinated crystallization to produce scalable, stable surfactant‐free MOF nanocatalysts. An amorphous pyridyl‐porphyrinic precursor is first prepared as hexagonal nanosheets via an ultrasonic‐assisted process. Upon exposure to water, cyclic hexameric water clusters bind pyridyl sites and drive reorganization into a corner‐sharing porphyrinic‐hexagon 3D honeycomb lattice, yielding robust hexagonal nanorods. Confined water clusters stabilize the lattice for >2 months and generate a pronounced potential gradient that promotes charge separation. The resulting nanocatalysts achieve a hydrogen evolution rate of 223.81 mmol g −1 h −1 , representing one of the better values reported for molecular photocatalysts. This work introduces water‐cluster–induced amorphous‐to‐crystalline self‐assembly as a versatile strategy for stabilizing surfactant‐free MOF nanophotocatalysts.
- 9 March 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (16)
Water‐Cluster–Mediated Amorphous‐to‐Crystalline Transition Enables Scalable Fabrication of Stable Surfactant‐Free MOF Nanocatalyst
Metal–organic framework (MOF) nanocatalysts are promising for solar‐to‐chemical conversion but often suffer hydrolytic degradation, especially in surfactant‐free, highly surface‐active forms. Here, we report a dual‐functional design that integrates amorphous nanostructuring with water‐triggered self‐coordinated crystallization to produce scalable, stable surfactant‐free MOF nanocatalysts. An amorphous pyridyl‐porphyrinic precursor is first prepared as hexagonal nanosheets via an ultrasonic‐assisted process. Upon exposure to water, cyclic hexameric water clusters bind pyridyl sites and drive reorganization into a corner‐sharing porphyrinic‐hexagon 3D honeycomb lattice, yielding robust hexagonal nanorods. Confined water clusters stabilize the lattice for >2 months and generate a pronounced potential gradient that promotes charge separation. The resulting nanocatalysts achieve a hydrogen evolution rate of 223.81 mmol g −1 h −1 , representing one of the better values reported for molecular photocatalysts. This work introduces water‐cluster–induced amorphous‐to‐crystalline self‐assembly as a versatile strategy for stabilizing surfactant‐free MOF nanophotocatalysts.