YBYorleny Badilla-Valverde

Yorleny Badilla-Valverde

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yorleny Badilla-Valverde has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    EFECTO DEL ESPACIAMIENTO EN LA PRODUCTIVIDAD Y VALOR ECONÓMICO DE MELINA CLONAL (Gmelina arborea Roxb.), PACÍFICO CENTRAL DE COSTA RICA

    by Nat-Yel Yasir Sáenz-Saborío, Olman Murillo-Gamboa, Yorleny Badilla-Valverde, Mario Guevara-Bonilla, Edwin Esquivel-Segura

    La melina se cultiva en el país desde los años 60 y es la principal fuente de abastecimiento de madera. La especie ha sido mejorada genéticamente y se ha logrado reducir su ciclo de vida de 10 a 6 años. El objetivo fue determinar el efecto del espaciamiento de plantación sobre la productividad y el valor comercial de Gmelina arborea. La investigación se realizó en un ensayo clonal de melina en Orotina, en el Pacífico central de Costa Rica, donde se evaluaron plantíos de 4x3,5 m, 4x3 m y 4x2,5 m. Se analizaron el diámetro, el volumen comercial, el valor económico, la calidad del árbol y los índices de calidad. El análisis de varianza y el no paramétrico Kruskal-Wallis se realizaron mediante programación en R; este último, únicamente para las variables que no cumplieron los supuestos de la regresión. El volumen y la valoración se obtuvieron mediante el programa Avalúos Forestales. El espaciamiento 4x3,5 m fue significativamente superior en todas las variables. El incremento en volumen, en valor comercial y en productividad fue exponencial e inversamente proporcional a la densidad de plantación. Melina clonal puede crecer a 6 cm año-1 DAP, 40 m3 ha-1 año-1 y $1438 ha-1 año-1 durante sus primeros 3 años, con 714 árboles ha-1. A mayor tasa de crecimiento del DAP aumenta exponencialmente la proporción de madera para aserrío y el valor económico de la plantación. Palabras clave: silvicultura clonal; manejo de plantaciones; economía forestal.

  • Open Access

    Efecto del espaciamiento en la productividad de teca clonal en sistema silvopastoril en Costa Rica

    by Olman Murillo Gamboa, Yorleny Badilla Valverde, Joshua Jiménez Jiménez, Róger Moya Roque

    La ganadería abarca un 33% del territorio y aporta emisiones importantes de gases efecto invernadero. El estudio tuvo como objetivo determinar el efecto de densidad de plantación en un sistema silvopastoril, para producción de madera y captura de carbono. Se evaluó ocho años el desarrollo de clones de teca en seis espaciamientos en franjas de 6 m de ancho, con tres hileras internas plantadas a 1 m; 2 m; 3 m; 4 m; 5 m y 6m. La base de análisis fue la franja de 1000 m lineales por 6 m de ancho. El espaciamiento 3m registró la mayor producción comercial con 110 m3 en 6000 m2 y capturar 105 toneladas de carbono. El mayor valor comercial por árbol se registró con 4 m, entre US$27 y $31. El SSP en franjas optimiza el uso del espacio, aumenta la producción de madera y captura de carbono en 1.2 veces con respecto a la plantación convencional.

  • Open Access

    Optimal age for selection in breeding clonal Tectona grandis

    by Badilla Yorleny, Murillo Olman

    Teak is one of most widely planted species in the tropics due to its high wood value. Two main questions motivated this research, how early can be performed genetic selection? and which is the optimal age selection in clonal Tectona grandis ? A clonal test was established at northern Pacific of Costa Rica with 32 clones. Measurements were taken at ages 3.2, 3.6, 4.4, 4.9, 5.9, 8.9, 9.7, 10.6, 11.8, and 12.9 years old for diameter at breast height (DBH), commercial height (estimated), tree quality (assessed) and commercial volume. Genetic parameters and genetic correlations across ages for all variables were obtained through SELEGEN software (REML/BLUP). Individual DBH clonal heritability (H 2 gi) ranged from 0.02 to 0.11, while clonal mean heritability (H2mc) ranged from 0.43 to 0.82. Highest mean clonal heritability for commercial volume was registered between 8,9 and 9.7 years (H2mc=0,74 and 0,77), thus 8,9 became as the target selection age. Significant genetic correlations were found (rg=0.74) between DBH at 4.9 years and commercial volume at 8.9 years. Spearman rank correlation and graphical analysis determined high clonal DBH ranking stability after 4.9 years. Maximum selection efficiency for commercial volume was registered at age 5. Therefore, 9 years-old can be defined as the target age for selection in clonal teak, while early selection can be practiced under low risk through DBH ranking at 5 years, supported by an age-age genetic correlation of rg=0.74. Graphical analysis of ranking splitted in thirds proved to be an effective method to verify ranking stability across ages.


  • Open Access

    Genetic resistance to Ceratocystis fimbriata in elite genotypes of Gmelina arborea

    by Dawa Méndez-Álvarez, Yorleny Badilla-Valverde, Olman Murillo-Gamboa, Rafael Ferreira Alfenas

    Introduction. In Costa Rica, an incidence of nearly 40 % has been reported for a disease caused by Ceratocystis fimbriata in commercial plantations of Gmelina arborea (melina), which is the second most widely planted forest tree species in the country. Consequently, there is a pressing need to explore genetic material that exhibit resistance to this pathogen. Objective. To evaluate two methods of C. fimbriata inoculation and their effect on elite genotypes of melina, for their use within the melina genetic improvement program at the international forest genetic improvement cooperative GENFORES. Materials and methods. A pathogenicity test was established using the CIF 001 isolate of C. fimbriata under greenhouse conditions, in Santa Clara, San Carlos, Costa Rica. Two inoculation methods were evaluated in five elite genotypes from October 2019 to January 2020. The effect of the pathogen was evaluated by measuring total height development, basal diameter, number of leaves, incidence, and internal injury within the plant. The assessment was conducted at 30, 60, 90, and 120 days. Results. Mortality was observed from day 38 and reached an incidence of 26.7 % at 120 days. The treatment using solid medium displayed the highest incidence percentage. Genotypes 15N and 58 exhibited high susceptibility to the CIF 001 isolate, whereas genotypes 1 and 57 exhibited high tolerance. Based on the results, it was determined that the pathogenicity test of C. fimbriata on melina can be evaluated at 90 days. Conclusion. Solid medium was the most effective method for inoculating melina with C. fimbriata (isolate CIF 001). Evaluations showed the need to assess results at least 90 days after inoculation. Based on the analysis of the internal lesion, genotype 1 was identified as highly resistant to the effect of the pathogen. The inclusion of this genotype as an evaluation technique will substantially enhance the protocol for assessing tolerance to the pathogen.


  • Open Access

    El sustrato y arreglo espacial de siembra en la productividad de minijardines clonales de Tectona grandis Linn. F

    by Arantxa Rodríguez-Solís, Yorleny Badilla-Valverde, Olman Murillo

    Introduction. Tectona grandis is the species with the largest planted area in Costa Rica, due to the high prices in the international market. The production of plants for reforestation has been technified in the country and is currently being developed based on protected environment technologies, which increase productivity, reduce operating costs, and offer planting material throughout the year. Objective. To evaluate the effect of two substrates and five planting densities on the productivity of clonal mini-gardens of Tectona grandis in a protected environment. Materials and methods. Four readily available inert substrates were characterized by granulometry and moisture retention analysis, from which stone dust was selected as the optimum substrate. An experimental trial with a 2x5 factorial design was established in San Carlos, Costa Rica to evaluate two substrates (stone dust alone and with 25 % charcoal) and five planting densities (cm) of 10x10, 10x5, 7x5, 10x10 with two plants per hole and 10x10 with one plant in the middle. Each density had four clones as a replicate effect. The trial was evaluated during five continuous production cycles from January to September 2021. Results. The use of stone dust as substrate, without charcoal, recorded the highest productivity at a lower cost. The spatial planting arrangement of 10x10 cm with one plant in the middle (n=145 plants/m2), recorded the highest shoot production per mother plant (1.16). The 7x5 cm arrangement increased productivity by up to 206 shoots m2/month. Conclusion. The change in planting density of the clonal mini-garden, in a first stage to 10x10cm with an additional plant in the center, resulted in a high impact on productivity (74 %), greater efficiency in the use of space, and a better gradual change in the operating system.


  • Open Access

    Selección clonal de Tectona grandis L. f. para el Pacífico seco de Costa Rica

    by Yorleny Badilla-Valverde, Olman Murillo-Gamboa

    Teak has the highest value of any commercially planted tree species in the tropics. The tree improvement international cooperative GENFORES, established in Costa Rica, has led breeding programs with this tree species in Latin America. This investigation was undertaken with the objective of selecting the clones which are best adapted to the dry Pacific zone of Costa Rica, as well as for other dry regions in the tropics. Research was carried out in Nicoya, in the province of Guanacaste (in the northern Pacific region of Costa Rica), where 31 genotypes were evaluated for 13 continuous years, in terms of diameter growth, commercial volume, and stem quality. Genetic parameters were obtained using Selegen-REML/BLUP software, as were selection rankings and estimated genetic gain. The highest values for individual heritability and mean clonal heritability for diameter (h2g = 0.12 and h2mc = 0.82), and for commercial volume (h2g = 0.075 and h2mc = 0.74) were obtained for trees that were 8.9 years old. Commercial plantations established with the best 10 clones, with an age of 12.9 years, may attain a commercial volume of 0.88 m3 per tree, corresponding to a genetic gain of 11% with respect to the best available seed source from a seed orchard, while diameter would reach 28 cm at the same age. These results allow a reduction of approximately two years of the age at which teak can be harvested in the dry Pacific zone of the country.


  • Open Access

    Variation and Genetic Control of the Heartwood, Sapwood, Bark, Wood Color Parameter, and Physical and Mechanical Properties of Dipteryx panamensis in Costa Rica

    by Dalina Rodríguez-Pérez, Róger Moya, Olman Murillo, Johana Gaitán-Álvarez, Yorleny Badilla-Valverde

    The Dipteryx genus has a natural distribution throughout several tropical countries in Latin America. This taxon has several tree species, all recognized for their high-density wood. The objective of this research was to study the variation and genetic control of several wood properties, including bark, sapwood, heartwood, green density (GD), specific gravity (SG), moisture content in green condition (MC-G), and mechanical properties, in a Dipteryx panamensis provenance/progeny test at 8 years old. The results showed that bark varied little among families and provenances, but heartwood (diameter and percentage) showed high genetic variation. SG and MC-G showed significant variation between provenances and families, while GD showed little variation. Among the mechanical properties evaluated, the greatest genetic variation was observed in the MOR in bending and shear stress. Families from the Coope San Juan provenance registered the highest values in all wood properties investigated, and families from Puerto Viejo obtained the lowest. Family heritability and the coefficient of genetic variation exhibited high values in heartwood/sapwood and the MOR in bending (h2 > 0.9 and CV > 20%) and lower values in SG, MC-G, compression stress, and shear stress. D. panamensis wood properties have a high potential to be improved through breeding programs.


  • Open Access

    Agronomic Effects of Tectona grandis Biochar from Wood Residues on the Growth of Young Cedrela odorata Plants in a Nursery

    by Arantxa Rodríguez Solís, Yorleny Badilla Valverde, Róger Moya

    Biochar from agroforestry biomass residues is an alternative source of fertilizers for improving the soil fertility. In Costa Rica, Cedrela odorata is planted in pure plantations and agroforestry systems and different types of substrates are used in the nursery to enhance the growth and performance of the young saplings. The main objective of the present study was to evaluate the growth (in height, diameter, biomass) and distribution of carbon (C), hydrogen (H), and nitrogen (N) for C. odorata plants in a nursery with different application rates of biochar produced from Tectona grandis wood residues. The results showed that the above-measured variables were statistically affected by different application rates of the biochar. The stem diameter, total height, number of leaves, and height increment were statistically significantly higher in the substrate with an application rate of 25–50 tons/ha, in contrast to the 0 and 75 tons/ha application rates, which were statistically the lowest. As for the levels of C, H, and N, there were differences, with the highest values of N and C being in the leaves and stem with the 50 tons/ha application rate and the highest values of H for the 75 tons/ha application rate. The above results showed that applying biochar obtained from T. grandis residues improved soil conditions, resulting in better growth of C. odorata saplings with an application rate of 25 and 50 tons/ha.


  • Open Access

    Comportamiento de clones de Gmelina arborea Roxb. en condiciones de suelo ácidos

    by William Hernández Castro, Yorleny Badilla Valverde, Edwin Esquivel Segura, Olman Murillo Gamboa

    [Introducción]: Gmelina arborea se ha consolidado como la segunda especie más utilizada en la reforestación comercial en Costa Rica. [Objetivo]: Evaluar el comportamiento de clones G. arborea en condiciones de suelo ácidos. [Metodología]: Se utilizó un diseño experimental de bloques completos al azar, con 6 repeticiones, 29 clones y 5 testigos, con un distanciamiento de 4 x 4 m. Se realizó un análisis del suelo y se calcularon parámetros genéticos a diferentes edades, para las variables diámetro a la altura del pecho (DAP), altura y volumen comercial, utilizando el software SELEGEN, el cual se basa en el método REML/BLUP; asimismo, se realizaron correlaciones genéticas entre las variables evaluadas. [Resultados]: El análisis del suelo reflejó deficiencias nutricionales de elementos esenciales para el desarrollo de la melina, un pH menor a 5.5, altos contenidos de hierro (Fe) y saturación de aluminio (Al) elevado. Los mayores coeficientes de heredabilidad individual y media del clon se presentaron a la edad de 4.5 años, donde el DAP es el carácter que presentó mayores valores. Las mayores correlaciones genéticas se presentaron entre las variables DAP-volumen comercial a partir de los 3.5 años. Se evidenció que existen 10 clones que mejor se adaptaron a las condiciones del sitio, presentando mayores crecimientos en las variables dasométricas, con ganancias genéticas dentro del rango de 12.7 % y 28 %, comparadas con la media general del ensayo y el material utilizado como testigo. [Conclusiones]: Se concluye que existe material genético de melina con potencial para adaptarse a condiciones de suelo ácidos.


  • Open Access

    Estimación de parámetros genéticos de Gmelina arborea Roxb. (melina) en el Caribe de Costa Rica

    by William Hernández-Castro, Yorleny Badilla Valverde, Olman Murillo-Gamboa

    La Gmelina arborea es una de las especies de mayor importancia en proyectos de reforestación comercial en Costa Rica y actualmente, forma parte importante del programa de mejoramiento genético en Costa Rica liderado por GENFORES. El objetivo del presente estudio consistió en determinar los parámetros genéticos de 54 clones de melina utilizados en un ensayo clonal en la región Caribe de Costa Rica. El ensayo se estableció con un diseño de bloques completos al azar con cuatro repeticiones por tratamiento, con un distanciamiento de 4 m x 3 m. Se calcularon parámetros genéticos a los 10, 22 y 34 meses, para las variables diámetro a la altura del pecho (DAP), altura comercial, volumen comercial y calidad del fuste, utilizando el software SELEGEN, el cual se basa en el método REML/BLUP, además, se realizaron correlaciones genéticas entre las variables evaluadas. Los resultados muestran mayor heredabilidad individual en sentido amplio para las variables de volumen comercial y DAP, además, reflejan que la calidad del fuste a los 22 y 34 meses presenta los mayores coeficientes de heredabilidad individual y heredabilidad media del clon. Las correlaciones genéticas reflejan valores altos y positivos entre las variables DAP-volumen comercial y altura comercial-calidad del fuste, a los 34 meses de edad, con un 0.97 y 0.74, respectivamente. Los clones 17 y 34, mostraron ser los mejores en el ranking genético en términos de volumen comercial; el material de control y el clon 19, fueron los que se ubicaron en las últimas posiciones del ranking. Se obtuvo una ganancia genética a los 34 meses de edad de 6.11 % y 9.36 % en DAP y volumen comercial, respectivamente. Se concluye que existe variabilidad genética en los materiales genéticos utilizados, que permiten obtener ganancias genéticas importantes, sobre todo si se utilizan los primeros 10 clones del ranking genético de las accesiones evaluadas.