SLSang Ho Lee

Sang Ho Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sang Ho Lee has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Free-Standing Architecture of Spatially Branched Nanowire Electrodes for Boosting Interfacial Stability in Solid-State Lithium-Ion Batteries

    by Minho Kim, Yunseo Lee, Min Woo Kim, Sang Ho Lee, Won Bae Kim

    Solid-state batteries show substantial promise for reducing the inherent safety risks associated with the flammability of liquid organic electrolytes. Nevertheless, their performance is often constrained by unstable solid–solid interfaces between the electrolyte and the electrodes. Herein, branch-structured SnO2 nanowire electrodes were developed, with the ultimate goal to improve electrode/electrolyte interfacial contact in solid-state lithium-ion batteries. The nanowire electrodes were fabricated directly on the current collector without electrochemically inactive additives. Notably, the branch length was precisely tunable by adjusting the growth duration, enabling the spontaneous formation of hierarchical pore structures by a physical “pushing effect” between adjacent branches. These interconnected microscale pore networks enhanced the infiltration capacity of the poly(ethylene oxide)/Li7La3Zr2O12 composite electrolyte, facilitating lithium-ion dynamics both in-plane and across electrode thickness. Moreover, the branch architectures promoted stable solid–solid contact areas with the electrolyte, leading to marked improvements in fast-charging performance and deliverable energy density over repeated charge/discharge cycles.


  • Smart Multi‐Layer Architecture Electrodes for High Energy Density Lithium‐Ion Capacitors

    by Sang Ho Lee

    Multi‐layer architectures for use in both negative and positive electrodes are developed through a layer‐by‐layer spray printing approach using complementary material combinations, with the ultimate goal to realize an ideal concept of hybrid lithium‐ion capacitors more fully – delivering attractive energy densities of insertion‐type negative electrodes while preserving outstanding power performances of activated carbon positive electrodes. To sustain advantageous capacities of intercalation anodes even at ultra‐fast charging rates, a thin, discrete layer of high capacity Si was interleaved between high power Li4Ti5O12 electrodes. In a cathode electrode, a sequential layer of insertion‐type LiFePO4 was assembled with a conventional activated carbon layer into a single layer structure, aiming at boosting overall deliverable capacities. The lithium‐ion capacitor comprising the smart multi‐layer architectures of negative and positive electrodes then provided a remarkable energy density of ∼110 Wh/kg with an outstanding power performance of 15 kW/kg.


  • Patterning Design of Electrode to Improve the Interfacial Stability and Rate Capability for Fast Rechargeable Solid-State Lithium-Ion Batteries

    by Minho Kim, Song Kyu Kang, Junil Choi, Hwichan Ahn, Junhyuk Ji, Sang Ho Lee, Won Bae Kim

    Patterned electrodes were developed for use in solid-state lithium-ion batteries, with the ultimate goal to promote fast-charging attributes through improving electrochemically activated surfaces within electrodes. By a conventional photolithography, patterned arrays of SnO2 nanowires were fabricated directly on the current collector, and empty channel structures formed between the resulting arrays were customized through modifying the size and interval of the SnO2 patterns. The composite electrolyte comprising Li7La3Zr2O12 and poly(ethylene oxide) was exploited to secure intimate interfacial contact at the electrode/electrolyte junction while preserving ionic conductivity in the bulk electrolyte. The potential and limitation of the electrode patterning approach were then explored experimentally. For example, the electrochemical behaviors of patterned electrodes were investigated as a function of variations in microchannel structures, and compared with those of conventional film-type electrodes. The findings show promise to improve electrode dynamics when electrochemical reaction kinetics could be hindered by poor interfacial characteristics on electrodes.


  • Open Access

    One-Pot Spray Engineering to Design Na0.44MnO2 Cathode Electrodes for High-Rate and Cycle-Stable Na-Ion Batteries

    by Bon-Ryul Koo, Young-Geun Lee, Sang Ho Lee, Geon-Hyoung An, Chun Huang

    To improve the practical performance of Na-ion batteries, electrode structure engineering provides a new route to improve the electrochemical efficiency of the cathode active material. In this study, we suggest a new route of one-pot spray engineering to design Na0.44MnO2 cathodes to realize high-rate and cycle-stable Na-ion battery performance. This technique adjusts the electrode structure from a dense to an open sponge-like morphology during layer-by-layer deposition of the materials. The sponge-like cathode results in improved ion insertion and transport kinetics, thus accelerating the rate capability with increased capacity and high-rate cycling capability (100.1 mAh/g and 90.2% cycling retention after 100 cycles at 5 C). These results highlight the potential for design engineering of cathode structures to achieve high-rate and cycle-stable performance for Na-ion batteries.


  • Scalable Multilayer Printing of Graphene Interfacial Layers for Ultrahigh Power Lithium‐Ion Storage

    by Sang Ho Lee, Colin Johnston, Patrick S. Grant

    A low resistance graphene‐based interfacial layer is developed for multilayered lithium‐ion capacitor electrodes using a layer‐by‐layer printing approach, with the goal of boosting energy storage performance at ultrafast charge/discharge rates (≥100 C). The electrochemical behavior of spray printed Li4Ti5O12‐based heterostructure electrodes is investigated as a thin, discrete graphene layer is placed: 1) at the base of the Li4Ti5O12 (at the electrode/current collector interface); 2) on the top of the Li4Ti5O12 (at the electrode/separator junction); and 3) both at the base and on the top of the Li4Ti5O12 (sandwich configuration), with marked improved electrode performance at >50 C when the graphene layer is interleaved at the Li4Ti5O12/current collector interface. This best performing heterostructure negative electrode is then coupled with a spray printed activated carbon positive electrode in a lithium‐ion capacitor configuration, showing an attractive power density of ≈8000 W kg−1 at 350 C. The fabrication of double‐sided graphene/Li4Ti5O12 multilayered heteroelectrodes is successfully demonstrated over areas of 20 cm × 15 cm and in various patterned configurations.


  • Open Access

    Scalable, Large-Area Printing of Pore-Array Electrodes for Ultrahigh Power Electrochemical Energy Storage

    by Sang Ho Lee, Colin Johnston, Patrick S. Grant

    Through-electrode thickness honeycomb architectures were layer-by-layer self-assembled directly through a scalable printing process for ultrapower hybrid lithium-ion capacitor applications. Initially, the electrochemical performance of the pore-array electrodes was investigated as a function of the active material type (graphene plates, carbon nanofibers, and activated carbon). Inactive components (conductive carbon and polymer binder) were then minimized to 5 wt %. Finally, an optimized activated carbon-based cathode was paired with a spray-printed Li4Ti5O12-based anode and a range of anode-to-cathode mass ratios in a lithium-ion capacitor arrangement were investigated. A 1:5 anode/cathode mass ratio provided an attractive energy density comparable with a Li4Ti5O12/LiFePO4 lithium-ion battery but with outstanding power capability that was an order of magnitude greater than typical for lithium-ion batteries. The pore-array electrode was reproduced over areas of 20 cm × 15 cm in a double-sided coated configuration, and the option for selectively patterning electrodes was also demonstrated.


  • Open Access

    Co-spray printing of LiFePO4 and PEO-Li1.5Al0.5Ge1.5(PO4)3 hybrid electrodes for all-solid-state Li-ion battery applications

    by Junfu Bu, Puiki Leung, Chun Huang, Sang Ho Lee, Patrick S. Grant

    LiFePO4 (LFP) electrodes for Li-ion battery applications were prepared by spray printing. By optimising the substrate temperature, solvent ratio and electrode material concentration, a honeycomb pore structure was produced over a large area electrode. In a liquid electrolyte, the honeycomb structured LFP electrode showed improved cycling performance at high C-rate due to shortened pore pathways and improved Li mobility. In a solid-state configuration, a PEO(LITFSI)-Li1.5Al0.5Ge1.5(PO4)3 (PEO-LAGP) based solid electrolyte was either spray printed on top of the LFP and/or interleaved within sub-layers of the LFP electrode, for both non-honeycomb and honeycomb pore morphologies. Cross-sectional scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDS) mapping combined with electrochemical impedance spectroscopy (EIS) testing showed that the honeycomb electrode with inter-leaved sub-layers of solid-state electrolyte improved interfacial contact between the electrode and electrolyte. When coupled with Li foil in a solid-state Li ion battery configuration, the honeycomb interleaved electrode also showed the best performance in terms of capacity and cycle stability at all testing temperatures, showing capability that exceeded previously reported performance.


  • Open Access

    Spray-Printed and Self-Assembled Honeycomb Electrodes of Silicon-Decorated Carbon Nanofibers for Li-Ion Batteries

    by Sang Ho Lee, Kexue Li, Chun Huang, Jack D. Evans, Patrick S. Grant

    Directional, micron-scale honeycomb pores in Li-ion battery electrodes were fabricated using a layer-by-layer, self-assembly approach based on spray printing of carbon nanofibers. By controlling the drying behavior of each printed electrode layer through optimization of (i) the volume ratio of fugitive bi-solvent carriers in the suspension, and (ii) the substrate temperature during printing, self-assembled, honeycomb pore channels through the electrode were created spontaneously and reliably on current collector areas larger than 20 cm × 15 cm. The honeycomb pore structure promoted efficient Li-ion dynamics at high charge/discharge current densities. Incorporating an optimum fraction (2.5 wt%) of high energy density Si particulate into the honeycomb electrodes provided a four-fold increase in deliverable discharge capacity at 8000 mA/g. The spray printed, honeycomb pore electrodes were then investigated as negative electrodes coupled with similar spray printed LiFePO4 positive electrodes in a full Li-ion cell configuration, providing an approximately 50 % improvement in rate capacity retention over half-cell configurations of identical electrodes at 4000 mA/g.