Leonid A. Nikiforov
Leonid A. Nikiforov has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
A. A. Okhlopkova
Ammosov Northeastern Federal University
6 shared publications- Jin-Ho Cho
Chemistry Department, Institute of Natural Sciences, North-Eastern Federal University, Yakutsk 677000, Russia
4 shared publications - Sardana A. Sleptsova
Ammosov North-Eastern Federal University
4 shared publications T. A. Okhlopkova
Ammosov Northeastern Federal University
4 shared publications- Александр Михайлович Спиридонов
Ammosov North-Eastern Federal University
4 shared publications - Aitalina Alekseevna Okhlopkova
Chemical Department, Institute of Natural Sciences, North-Eastern Federal University, Yakutsk 677000, Russia
3 shared publications
Latest Publications
- Open Access
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1060 (1) , 012020
Effects of Surface Reactions during Friction on Tribological Characteristics of PTFE-Muscovite Composites
This work presents the results of tribological and structural investigations of polymer composites based on polytetrafluoroethylene and muscovite. It is shown that the wear resistance of the composites increased up to 675 times in comparison with the initial polymer. The increase of wear resistance is attributed to the occurrence of tribo-oxidation processes on the friction surface, which have been confirmed by various investigations. Thus, IR spectroscopy showed that carboxylate anions are formed on the friction surface of composites during friction processes. An increase in oxygen and a decrease in carbon and fluorine concentrations on the composite surface have been detected after friction using the EDS analysis. The results of XPS have confirmed the destruction of C-F bonds and the formation of new oxygen-containing compounds. These research methods indicated the occurrence of tribo-oxidative processes during friction.
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1060 (1) , 012020
Open AccessEffects of Surface Reactions during Friction on Tribological Characteristics of PTFE-Muscovite Composites
This work presents the results of tribological and structural investigations of polymer composites based on polytetrafluoroethylene and muscovite. It is shown that the wear resistance of the composites increased up to 675 times in comparison with the initial polymer. The increase of wear resistance is attributed to the occurrence of tribo-oxidation processes on the friction surface, which have been confirmed by various investigations. Thus, IR spectroscopy showed that carboxylate anions are formed on the friction surface of composites during friction processes. An increase in oxygen and a decrease in carbon and fluorine concentrations on the composite surface have been detected after friction using the EDS analysis. The results of XPS have confirmed the destruction of C-F bonds and the formation of new oxygen-containing compounds. These research methods indicated the occurrence of tribo-oxidative processes during friction.
- 1 July 2020
- Published by Allerton Press in Russian Journal of Non-Ferrous Metals
- Vol. 61 (4) , 456-465
Comparison of Morphological and Structural Characteristics of Nanopowder Particles Fabricated by Grinding Natural Diamond and Detonation Synthesis
Specific features of the morphological and structural characteristics of nanopowder particles fabricated by grinding bulk natural diamond and by detonation
- 1 July 2020
- Published by Allerton Press in Russian Journal of Non-Ferrous Metals
- Vol. 61 (4) , 456-465
Comparison of Morphological and Structural Characteristics of Nanopowder Particles Fabricated by Grinding Natural Diamond and Detonation Synthesis
Specific features of the morphological and structural characteristics of nanopowder particles fabricated by grinding bulk natural diamond and by detonation
- Open Access
- 1 August 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 320 (1) , 012060
Oil filled polymer composites based on ultrahigh-molecular-weight polyethylene
In recent years, a method of increasing the frictional properties of polymeric materials by introducing liquid lubricating oils into their composition has become widespread. The aim of this work is to create new wear-resistant polymer composite materials based on ultrahigh-molecular-weight polyethylene (UHMWPE) with liquid-phase filling. When UHMWPE is filled with lubricating oil, there is an increase in wear resistance by 4 times compared with the original UHMWPE.
- 1 August 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 320 (1) , 012060
Open AccessOil filled polymer composites based on ultrahigh-molecular-weight polyethylene
In recent years, a method of increasing the frictional properties of polymeric materials by introducing liquid lubricating oils into their composition has become widespread. The aim of this work is to create new wear-resistant polymer composite materials based on ultrahigh-molecular-weight polyethylene (UHMWPE) with liquid-phase filling. When UHMWPE is filled with lubricating oil, there is an increase in wear resistance by 4 times compared with the original UHMWPE.
- Open Access
Mechanical and Tribological Properties of Polytetrafluoroethylene Composites with Carbon Fiber and Layered Silicate Fillers
Mixtures of layered silicates (vermiculite and kaolinite) and carbon fibers were investigated as filler materials for polytetrafluoroethylene. The supramolecular structure and the tribological and mechanical properties of the resulting polymer composite materials were evaluated. The yield strength and compressive strength of the polymer increased by 55% and 60%, respectively, when a mixed filler was used, which was attributed to supramolecular reinforcement of the composites. In addition, the wear resistance increased by 850 times when using vermiculite/kaolinite fillers, which was due to protection of the surface by the formation of hard tribofilms.
Open AccessMechanical and Tribological Properties of Polytetrafluoroethylene Composites with Carbon Fiber and Layered Silicate Fillers
Mixtures of layered silicates (vermiculite and kaolinite) and carbon fibers were investigated as filler materials for polytetrafluoroethylene. The supramolecular structure and the tribological and mechanical properties of the resulting polymer composite materials were evaluated. The yield strength and compressive strength of the polymer increased by 55% and 60%, respectively, when a mixed filler was used, which was attributed to supramolecular reinforcement of the composites. In addition, the wear resistance increased by 850 times when using vermiculite/kaolinite fillers, which was due to protection of the surface by the formation of hard tribofilms.
- 1 January 2019
- Published by Allerton Press in Journal of Friction and Wear
- Vol. 40 (1) , 27-32
The Influence of Brominated UHMWPE on the Tribological Characteristics and Wear of Polymeric Nanocomposites Based on UHMWPE and Nanoparticles
— Tribological tests of polymeric composite materials based on UHMWPE modified with inorganic nanoparticles and brominated UHMWPE as a functional alloying element have been performed in order...
- 1 January 2019
- Published by Allerton Press in Journal of Friction and Wear
- Vol. 40 (1) , 27-32
The Influence of Brominated UHMWPE on the Tribological Characteristics and Wear of Polymeric Nanocomposites Based on UHMWPE and Nanoparticles
— Tribological tests of polymeric composite materials based on UHMWPE modified with inorganic nanoparticles and brominated UHMWPE as a functional alloying element have been performed in order...
- Open Access
- 19 December 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2053 (1) , 040009
Effect of brominated UHMWPE on the properties and structure of the resulting UHMWPE/boron carbide nanocomposite
The polar surface of inorganic nanoparticles and the nonpolar surface of a polymer are thermodynamically incompatible. This is the reason for the insufficient improvement of polymer properties by the addition of nanoparticles. Therefore, the technology of UHMWPE bromination is developed in order to create an agent affecting the interphase interaction of nanoparticles with a UHMWPE matrix. In this paper, the results of the use of brominated UHMWPE as an adhesion-changing agent in the case of UHMWPE/boron carbide composite are reported. It has been found that brominated UHMWPE decreases interphase interactions of boron carbide nanoparticles with the UHMWPE matrix and deteriorates the mechanical properties of the composite.
- 19 December 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2053 (1) , 040009
Open AccessEffect of brominated UHMWPE on the properties and structure of the resulting UHMWPE/boron carbide nanocomposite
The polar surface of inorganic nanoparticles and the nonpolar surface of a polymer are thermodynamically incompatible. This is the reason for the insufficient improvement of polymer properties by the addition of nanoparticles. Therefore, the technology of UHMWPE bromination is developed in order to create an agent affecting the interphase interaction of nanoparticles with a UHMWPE matrix. In this paper, the results of the use of brominated UHMWPE as an adhesion-changing agent in the case of UHMWPE/boron carbide composite are reported. It has been found that brominated UHMWPE decreases interphase interactions of boron carbide nanoparticles with the UHMWPE matrix and deteriorates the mechanical properties of the composite.
- Open Access
- 12 November 2018
- Published by MDPI AG in Preprints.org
Effect of Magnesium Spinel on the Properties and Structure of Composites PTFE/Layered Silicate
The article describes the study of the properties of polytetrafluoroethylene, modified using natural layered silicates—serpentinite. It is shown that the introduction of a small amount of layered silicates significantly increases the tribological characteristics of the material. The additional introduction of magnesium nano-spinels facilitated the formation of an intercalated polymer-silicate nanocomposite.
- 12 November 2018
- Published by MDPI AG in Preprints.org
Open AccessEffect of Magnesium Spinel on the Properties and Structure of Composites PTFE/Layered Silicate
The article describes the study of the properties of polytetrafluoroethylene, modified using natural layered silicates—serpentinite. It is shown that the introduction of a small amount of layered silicates significantly increases the tribological characteristics of the material. The additional introduction of magnesium nano-spinels facilitated the formation of an intercalated polymer-silicate nanocomposite.
- Open Access
Surfactant Effects on Structure and Mechanical Properties of Ultrahigh-Molecular-Weight Polyethylene/Layered Silicate Composites
In this study, the reinforcement of ultrahigh-molecular-weight polyethylene (UHMWPE) with biotite was investigated. The biotite filler was mechanically activated with different dry surfactants to improve its compatibility with UHMWPE and decrease agglomeration among biotite particles. Alkyldimethylbenzylammonium chloride (ADBAC) and cetyltrimethylammonium bromide (CTAB) were selected as cationic surfactants. The tensile strength of composites containing 1 wt % of CTAB-treated biotite was increased by 30% relative to those with untreated biotite, but was unchanged with ADBAC treatment of the same biotite content. The stereochemistry of the surfactant may be critical to the composite structure and mechanical properties of the material. The stereochemistry of CTAB was preferable to that of ADBAC in enhancing mechanical properties because the stereochemistry of ADBAC impedes favorable interactions with the biotite surface during mechanical activation.
Open AccessSurfactant Effects on Structure and Mechanical Properties of Ultrahigh-Molecular-Weight Polyethylene/Layered Silicate Composites
In this study, the reinforcement of ultrahigh-molecular-weight polyethylene (UHMWPE) with biotite was investigated. The biotite filler was mechanically activated with different dry surfactants to improve its compatibility with UHMWPE and decrease agglomeration among biotite particles. Alkyldimethylbenzylammonium chloride (ADBAC) and cetyltrimethylammonium bromide (CTAB) were selected as cationic surfactants. The tensile strength of composites containing 1 wt % of CTAB-treated biotite was increased by 30% relative to those with untreated biotite, but was unchanged with ADBAC treatment of the same biotite content. The stereochemistry of the surfactant may be critical to the composite structure and mechanical properties of the material. The stereochemistry of CTAB was preferable to that of ADBAC in enhancing mechanical properties because the stereochemistry of ADBAC impedes favorable interactions with the biotite surface during mechanical activation.
- 1 September 2016
- Published by Pleiades Publishing Ltd in Russian Journal of Applied Chemistry
- Vol. 89 (9) , 1469-1476
Technology of liquid-phase compounding of ultra-high-molecular-weight polyethylene with nanoparticles of inorganic compounds under the action of ultrasonic vibrations
A novel technology for preparing nanocomposites on the basis of ultra-high-molecular-mass polyethylene and nanoparticles of inorganic compounds (SiO2, Al2O3, ZrO2, AlN, Si3N4) was developed and tested. The technology consists in liquid-phase compounding of nanocomposite components under the continuous action of ultrasonic vibrations. The developed technology ensures dispersion of nanopaticle agglomerates in a liquid medium, efficient mixing of components of the powder blend, and uniform distribution of nanoparticles in the polymer matrix. The nanocomposites obtained exhibit increased levels of strength and elasticity.
- 1 September 2016
- Published by Pleiades Publishing Ltd in Russian Journal of Applied Chemistry
- Vol. 89 (9) , 1469-1476
Technology of liquid-phase compounding of ultra-high-molecular-weight polyethylene with nanoparticles of inorganic compounds under the action of ultrasonic vibrations
A novel technology for preparing nanocomposites on the basis of ultra-high-molecular-mass polyethylene and nanoparticles of inorganic compounds (SiO2, Al2O3, ZrO2, AlN, Si3N4) was developed and tested. The technology consists in liquid-phase compounding of nanocomposite components under the continuous action of ultrasonic vibrations. The developed technology ensures dispersion of nanopaticle agglomerates in a liquid medium, efficient mixing of components of the powder blend, and uniform distribution of nanoparticles in the polymer matrix. The nanocomposites obtained exhibit increased levels of strength and elasticity.