A. B. Makhanbetov
Research Subjects
A. B. Makhanbetov has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
A. B. Baeshov
Inst Fuel Catalysis & Electrochem, Alma Ata, Kazakhstan
1 shared publication- A. Bayeshov
D.V. Sokolski Institute of Organic Catalysis and Electrochemistry
1 shared publication - Abduali Bayeshov
JSC Inst Fuel Catalysis & Electrochem, Alma Ata, Kazakhstan
1 shared publication - Abdurassul A. Zharmenov
National Center on Complex Processing of Mineral Raw Materials of the Republic of Kazakhstan RSE, Almaty 050036, Kazakhstan
1 shared publication - Andrei V. Kolesnikov
Department of Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, Staatsartillerie Road, Pretoria West, Pretoria 0183, South Africa
1 shared publication - Arnur Кеnzhegaliev
Zhazken Zhiembayev Kazakh Research Institute of Plant Protection and Quarantine, Almaty, Kazakhstan
1 shared publication
Latest Publications
- Open Access
- 1 October 2026
- Published by Republican State Enterprise "Kazhydromet" in Hydrometeorology and ecology
- Vol. 123 (3) , 167-176
STUDY OF THE BIOLOGICAL ACTIVITY OF SULFUR-CONTAINING WASTE RECYCLING PRODUCTS AGAINST APPLE PESTS
In the context of sustainable agricultural development, there is an increasing demand for environmentally safe and effective plant protection products. Particular attention is being paid to the use of sulfur-containing industrial waste as a source of biologically active compounds. The aim of this study was to evaluate the biological activity of calcium polysulfide (lime sulfur solution – LSS, a 40% aqueous solution) obtained from sulfur-containing waste against a complex of apple pests. Field experiments were conducted in an apple orchard in the Almaty region using standard phytosanitary monitoring methods. The results showed that the application of calcium polysulfide at concentrations of 1.0…3.0% provided high biological efficacy against mites (Panonychus ulmi, Bryobia rubrioculus), as well as Cydia pomonella larvae and mealybugs. The biological efficacy ranged from 74,1% to 90,3% depending on the concentration. The highest efficacy was observed at a concentration of 3,0%, where the reduction in mite damage reached 90,3% on leaves and 88,5% on fruits. The findings confirm the high efficacy of calcium polysulfide derived from sulfur-containing waste and demonstrate its potential for use in integrated pest management systems. Its application contributes to reducing pesticide load and promoting the rational utilization of secondary resources.
- 1 October 2026
- Published by Republican State Enterprise "Kazhydromet" in Hydrometeorology and ecology
- Vol. 123 (3) , 167-176
Open AccessSTUDY OF THE BIOLOGICAL ACTIVITY OF SULFUR-CONTAINING WASTE RECYCLING PRODUCTS AGAINST APPLE PESTS
In the context of sustainable agricultural development, there is an increasing demand for environmentally safe and effective plant protection products. Particular attention is being paid to the use of sulfur-containing industrial waste as a source of biologically active compounds. The aim of this study was to evaluate the biological activity of calcium polysulfide (lime sulfur solution – LSS, a 40% aqueous solution) obtained from sulfur-containing waste against a complex of apple pests. Field experiments were conducted in an apple orchard in the Almaty region using standard phytosanitary monitoring methods. The results showed that the application of calcium polysulfide at concentrations of 1.0…3.0% provided high biological efficacy against mites (Panonychus ulmi, Bryobia rubrioculus), as well as Cydia pomonella larvae and mealybugs. The biological efficacy ranged from 74,1% to 90,3% depending on the concentration. The highest efficacy was observed at a concentration of 3,0%, where the reduction in mite damage reached 90,3% on leaves and 88,5% on fruits. The findings confirm the high efficacy of calcium polysulfide derived from sulfur-containing waste and demonstrate its potential for use in integrated pest management systems. Its application contributes to reducing pesticide load and promoting the rational utilization of secondary resources.
- 1 January 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 6 (6) , 95-101
STUDY OF THE MATERIAL COMPOSITION OF THE SAMPLE MANGANESE-CONTAINING ORE DEPOSITS "KARAMOLA"
In this work, the material composition of the ore of the Karamola Deposit is studied. A sample of manganese ore from the Karamola Deposit with a size of 0-120 mm was received for research on the material composition. The manganese mineralization of the sample is represented by the mineral series polyanite-pyrolusite and WADA-psilomelane. Mineral secretions are crystalline earthy structures and mixed formations. Manganese oxides are distributed almost throughout the entire mass of the rock. They are represented by crystallized gel formations, soot, and skeletal structures. Ore gels permeate the rock through cracks, cleavages, leaching voids, pores, cleavage planes and penetrate between the scales of layered minerals and form a variety of forms in the mass of the rock: individual strokes, threadlike cuts, veins, edges, layers, nests. Replacement solutions are siliceous or manganese-siliceous in nature and color the rock in the corresponding color with mineral microparticles: black - manganese, red and red - iron. Rock-forming minerals are mainly represented by quartz. The granulometric composition of an ore sample crushed to the minus 2.0+0 mm class was determined.
- 1 January 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 6 (6) , 95-101
STUDY OF THE MATERIAL COMPOSITION OF THE SAMPLE MANGANESE-CONTAINING ORE DEPOSITS "KARAMOLA"
In this work, the material composition of the ore of the Karamola Deposit is studied. A sample of manganese ore from the Karamola Deposit with a size of 0-120 mm was received for research on the material composition. The manganese mineralization of the sample is represented by the mineral series polyanite-pyrolusite and WADA-psilomelane. Mineral secretions are crystalline earthy structures and mixed formations. Manganese oxides are distributed almost throughout the entire mass of the rock. They are represented by crystallized gel formations, soot, and skeletal structures. Ore gels permeate the rock through cracks, cleavages, leaching voids, pores, cleavage planes and penetrate between the scales of layered minerals and form a variety of forms in the mass of the rock: individual strokes, threadlike cuts, veins, edges, layers, nests. Replacement solutions are siliceous or manganese-siliceous in nature and color the rock in the corresponding color with mineral microparticles: black - manganese, red and red - iron. Rock-forming minerals are mainly represented by quartz. The granulometric composition of an ore sample crushed to the minus 2.0+0 mm class was determined.
- 15 September 2019
- Published by Institute of Metallurgy and Ore Benefication (Publications) in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
- Vol. 310 (3) , 27-33
Direct reduction of selenite-ionsfrom a hydrochloric acid solution of copper (II) chloride withselenium powder formationon
Research article presents an electrochemical method for obtaining selenium powder from compounds of 4-valent selenium in the presence of copper (II) ions. The electrolysis was carried out in an electrolytic cell with an unseparated interelectrode space in a hydrochloric acid solution containing copper chloride, where a copper electrode was used as the anode and a titanium electrode as the cathode.Cu (I) –Cu (II) redox pair potential difference was used as a reducing agent. Ultrafine selenium powder formation as a result of the chemical reduction of selenium (IV) ions by copper (I) ions obtained by anodic dissolution, as well as by the interaction of copper (II) ions with an anode was shown. Results of our study were presented, showing the influence of electrolysis conditions, current density, temperature of medium, acid concentration and copper (II) ion concentration during electrolysis on selenium formation current output, shape and size of the resulting powder. Study results demonstrate selenium powder formation with a very high current efficiency.
- 15 September 2019
- Published by Institute of Metallurgy and Ore Benefication (Publications) in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
- Vol. 310 (3) , 27-33
Direct reduction of selenite-ionsfrom a hydrochloric acid solution of copper (II) chloride withselenium powder formationon
Research article presents an electrochemical method for obtaining selenium powder from compounds of 4-valent selenium in the presence of copper (II) ions. The electrolysis was carried out in an electrolytic cell with an unseparated interelectrode space in a hydrochloric acid solution containing copper chloride, where a copper electrode was used as the anode and a titanium electrode as the cathode.Cu (I) –Cu (II) redox pair potential difference was used as a reducing agent. Ultrafine selenium powder formation as a result of the chemical reduction of selenium (IV) ions by copper (I) ions obtained by anodic dissolution, as well as by the interaction of copper (II) ions with an anode was shown. Results of our study were presented, showing the influence of electrolysis conditions, current density, temperature of medium, acid concentration and copper (II) ion concentration during electrolysis on selenium formation current output, shape and size of the resulting powder. Study results demonstrate selenium powder formation with a very high current efficiency.
- 15 December 2018
- Published by National Academy of Sciences of the Republic of Kazakshtan in THE BULLETIN
- Vol. 6 (376) , 6-10
FORMATION OF DISPERSE COPPER POWDER IN ANODIC SPACE IN SULFURIC ACID SOLUTION
- 15 December 2018
- Published by National Academy of Sciences of the Republic of Kazakshtan in THE BULLETIN
- Vol. 6 (376) , 6-10
FORMATION OF DISPERSE COPPER POWDER IN ANODIC SPACE IN SULFURIC ACID SOLUTION
- 1 November 2015
- Published by Allerton Press in Russian Journal of Non-Ferrous Metals
- Vol. 56 (6) , 606-610
Production of electrolytic manganese from sulfate solutions
- 1 November 2015
- Published by Allerton Press in Russian Journal of Non-Ferrous Metals
- Vol. 56 (6) , 606-610
Production of electrolytic manganese from sulfate solutions