Mingchang Zhang
Research Subjects
Mingchang Zhang has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
Chao Zheng
Institute of Science and Technology for New Energy
3 shared publicationsHongge Pan
Institute of Science and Technology for New Energy
3 shared publicationsHuiqing Fan
State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, P. R. China
3 shared publicationsWeijia Wang
State Key Laboratory of Solidification Processing School of Materials Science and Engineering Northwestern Polytechnical University Xi'an 710072 China
3 shared publicationsDa Liu
College of Smart Materials and Future Energy, State Key Laboratory of Advanced Coatings for Equipment
2 shared publicationsHaijun Peng
2 shared publications
Latest Publications
- Top Cited Papers
- 26 January 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (5) , 4152-4165
Dynamic Restructuring of Carbon Nanotube-Supported High-Entropy Alloys Enabling Efficient Oxygen Electrocatalysis
Oxygen electrocatalysis, mainly including the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), is a cornerstone in rechargeable metal-air batteries. However, these reactions are sluggish due to the four-electron transfer process and the linear scaling relationship of the intermediate binding strength. Herein, we have rationally developed a hybrid composite consisting of high-entropy alloy nanoparticles (NPs) encapsulated in carbon nanotubes (CNTs) to significantly improve the electrocatalytic performance. In situ spectroscopy investigations and theoretical calculations disclose that high-entropy alloys undergo dynamic reconstruction to form MOOH and M-OH (M represents metallic elements) as the authentic active species in the ORR and OER processes, respectively. Specifically, Fe, Co, Mn, and Cu regulate the charge transfer between the Ni-O bonds in MOOH for the OER, while the high-entropy effect and surface-absorbed OH groups coregulate the d-band center of surface Co for the efficient ORR. Accordingly, the as-developed FeCoNiMnCu@CNTs exhibits activity for both ORR and OER, with an ultralow voltage gap of 0.626 V between the half-wave potential of ORR and the OER potential at 10 mA cm-2. Moreover, Zn-air batteries with FeCoNiMnCu@CNTs exhibit a power density of 131.3 mW cm-2 and robust stability.
- 26 January 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (5) , 4152-4165
Top Cited PapersDynamic Restructuring of Carbon Nanotube-Supported High-Entropy Alloys Enabling Efficient Oxygen Electrocatalysis
Oxygen electrocatalysis, mainly including the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), is a cornerstone in rechargeable metal-air batteries. However, these reactions are sluggish due to the four-electron transfer process and the linear scaling relationship of the intermediate binding strength. Herein, we have rationally developed a hybrid composite consisting of high-entropy alloy nanoparticles (NPs) encapsulated in carbon nanotubes (CNTs) to significantly improve the electrocatalytic performance. In situ spectroscopy investigations and theoretical calculations disclose that high-entropy alloys undergo dynamic reconstruction to form MOOH and M-OH (M represents metallic elements) as the authentic active species in the ORR and OER processes, respectively. Specifically, Fe, Co, Mn, and Cu regulate the charge transfer between the Ni-O bonds in MOOH for the OER, while the high-entropy effect and surface-absorbed OH groups coregulate the d-band center of surface Co for the efficient ORR. Accordingly, the as-developed FeCoNiMnCu@CNTs exhibits activity for both ORR and OER, with an ultralow voltage gap of 0.626 V between the half-wave potential of ORR and the OER potential at 10 mA cm-2. Moreover, Zn-air batteries with FeCoNiMnCu@CNTs exhibit a power density of 131.3 mW cm-2 and robust stability.
- 16 June 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (25) , 10209-10217
Balancing the Surface Reconstruction of Spinel Oxides for Efficient Oxygen Evolution Reaction
Transition metal compounds usually suffer from dynamic surface reconstruction with the electrocatalytic oxygen evolution reaction (OER). However, how to modulate the reconstruction to simultaneously achieve high activity and stability remains a grand challenge. Herein, we report a dynamic manipulation of the surface reconstruction to break the activity-stability trade-off in the spinel cobalt oxides through an introduction of an oxygen vacancy and doped metal element. The combined operando spectra investigations and theoretical calculations disclose that oxygen vacancies and Fe dopants synergistically elevate the Co d-band center and the O p-band center, manipulating the occurrence of surface transformation into active Fe-doped CoOOH (Fe-CoOOH) with optimized *O adsorption. The dynamically generated Fe vacancies during the OER suppress excessive reconstruction by downshifting the d-band center of Co, thereby stabilizing the catalyst. This work provides an alternative way to design more active and stable transition-metal-compound-based electrocatalysts for OER catalysis.
- 16 June 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (25) , 10209-10217
Balancing the Surface Reconstruction of Spinel Oxides for Efficient Oxygen Evolution Reaction
Transition metal compounds usually suffer from dynamic surface reconstruction with the electrocatalytic oxygen evolution reaction (OER). However, how to modulate the reconstruction to simultaneously achieve high activity and stability remains a grand challenge. Herein, we report a dynamic manipulation of the surface reconstruction to break the activity-stability trade-off in the spinel cobalt oxides through an introduction of an oxygen vacancy and doped metal element. The combined operando spectra investigations and theoretical calculations disclose that oxygen vacancies and Fe dopants synergistically elevate the Co d-band center and the O p-band center, manipulating the occurrence of surface transformation into active Fe-doped CoOOH (Fe-CoOOH) with optimized *O adsorption. The dynamically generated Fe vacancies during the OER suppress excessive reconstruction by downshifting the d-band center of Co, thereby stabilizing the catalyst. This work provides an alternative way to design more active and stable transition-metal-compound-based electrocatalysts for OER catalysis.
- 10 April 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (16) , 7890-7900
Robust Interphases Constructed by an Excellent Ionic Conductivity Versatile Binder System for High-Voltage Li-Rich Mn-Based Layered Oxide Cathode
- 10 April 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (16) , 7890-7900
Robust Interphases Constructed by an Excellent Ionic Conductivity Versatile Binder System for High-Voltage Li-Rich Mn-Based Layered Oxide Cathode
- 20 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (8) , 10009-10018
Regulating Crystal Orientation in VO2 for Aqueous Zinc Batteries with Enhanced Pseudocapacitance
Although aqueous zinc batteries have attracted extensive interest, they are limited by relatively low rate capabilities and poor cyclic stability of cathodes. The crystal orientation of the cathode is one important factor influencing electrochemical properties. However, it has rarely been investigated. Herein, VO2 cathodes with different crystal orientations are developed via tuning the number of hydroxyl groups in polyol, such as using glycerol, erythritol, xylitol, or mannitol. The polyols serve as a reductant as well as a structure-directing agent through a hydrothermal reaction. Xylitol-derived VO2 shows a (110)-orientated crystalline structure and ultrathin nanosheet morphology. Such features greatly enhance the pseudocapacitance to 76.1% at a scan rate of 1.0 mV s-1, which is significantly larger than that (61.6%) of the (001)-oriented VO2 derived from glycerol. The corresponding aqueous zinc batteries exhibit a high energy storage performance with a reversible specific capacity of 317 mAh g-1 at 0.5 A g-1, rate ability of 220 mAh g-1 at 10 A g-1, and capacity retention of 81.0% at 10 A g-1 over 2000 cycles. This work demonstrates a facile method for tailoring VO2 crystal orientations, offers an understanding of the Zn2+ storage mechanism upon different VO2 facets, and provides a novel method to develop cathode materials toward advanced aqueous zinc batteries.
- 20 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (8) , 10009-10018
Regulating Crystal Orientation in VO2 for Aqueous Zinc Batteries with Enhanced Pseudocapacitance
Although aqueous zinc batteries have attracted extensive interest, they are limited by relatively low rate capabilities and poor cyclic stability of cathodes. The crystal orientation of the cathode is one important factor influencing electrochemical properties. However, it has rarely been investigated. Herein, VO2 cathodes with different crystal orientations are developed via tuning the number of hydroxyl groups in polyol, such as using glycerol, erythritol, xylitol, or mannitol. The polyols serve as a reductant as well as a structure-directing agent through a hydrothermal reaction. Xylitol-derived VO2 shows a (110)-orientated crystalline structure and ultrathin nanosheet morphology. Such features greatly enhance the pseudocapacitance to 76.1% at a scan rate of 1.0 mV s-1, which is significantly larger than that (61.6%) of the (001)-oriented VO2 derived from glycerol. The corresponding aqueous zinc batteries exhibit a high energy storage performance with a reversible specific capacity of 317 mAh g-1 at 0.5 A g-1, rate ability of 220 mAh g-1 at 10 A g-1, and capacity retention of 81.0% at 10 A g-1 over 2000 cycles. This work demonstrates a facile method for tailoring VO2 crystal orientations, offers an understanding of the Zn2+ storage mechanism upon different VO2 facets, and provides a novel method to develop cathode materials toward advanced aqueous zinc batteries.
- Top Cited Papers
- 31 December 2023
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (9)
Unveiling The Mechanism of The Dendrite Nucleation and Growth in Aqueous Zinc Ion Batteries
Aqueous zinc ion batteries (ZIBs) exhibit great potential for next‐generation energy storage devices. However, significant challenges exist, including the uncontrollable formation of Zn dendrite and side reactions during zinc stripping and plating. The mechanism of Zn dendrite nucleation has yet to be fully understood. In this work, the first principles simulations are used to investigate the Zn dendrite formation process. The unintentionally adsorbed O2− and OH− ions are the inducing factors for Zn dendrite nucleation and growth on the Zn (0001) plane due to significantly increased Zn diffusion barriers. A top‐down method is demonstrated to suppress the dendrite using delaminated V2CTx to capture O2− and OH− ions thanks to reduced Zn diffusion barriers. The experimental results revealed significantly suppressed Zn dendrite nucleation and growth, resulting in a layer‐by‐layer deposit/stripping of Zn. Based on the electrochemical evaluations, the V2CTx‐coated Zn composite delivers a high coulombic efficiency of 99.3% at 1.0 mAh cm−2. Furthermore, the full cell achieves excellent cyclic performance of 93.6% capacity retention after 2000 cycles at 1 A g−1. This strategy has broad scalability and can be widely applied in designing metallic anodes for rechargeable batteries.
- 31 December 2023
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (9)
Top Cited PapersUnveiling The Mechanism of The Dendrite Nucleation and Growth in Aqueous Zinc Ion Batteries
Aqueous zinc ion batteries (ZIBs) exhibit great potential for next‐generation energy storage devices. However, significant challenges exist, including the uncontrollable formation of Zn dendrite and side reactions during zinc stripping and plating. The mechanism of Zn dendrite nucleation has yet to be fully understood. In this work, the first principles simulations are used to investigate the Zn dendrite formation process. The unintentionally adsorbed O2− and OH− ions are the inducing factors for Zn dendrite nucleation and growth on the Zn (0001) plane due to significantly increased Zn diffusion barriers. A top‐down method is demonstrated to suppress the dendrite using delaminated V2CTx to capture O2− and OH− ions thanks to reduced Zn diffusion barriers. The experimental results revealed significantly suppressed Zn dendrite nucleation and growth, resulting in a layer‐by‐layer deposit/stripping of Zn. Based on the electrochemical evaluations, the V2CTx‐coated Zn composite delivers a high coulombic efficiency of 99.3% at 1.0 mAh cm−2. Furthermore, the full cell achieves excellent cyclic performance of 93.6% capacity retention after 2000 cycles at 1 A g−1. This strategy has broad scalability and can be widely applied in designing metallic anodes for rechargeable batteries.
- 6 July 2022
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 46 (31) , 15095-15101
Photochemical synthesis of bimetallic CuNiSxquantum dots onto g-C3N4as a cocatalyst for high hydrogen evolution
CuNiSxQDs were fabricated onto g-C3N4by photochemical deposition method. The small size can expose more active S sites on the edge and the introduction of Cu2+into NiSxcan slightly modulate the electronic structure of Ni and S centers, thus weakening the S–Hadsbonds.
- 6 July 2022
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 46 (31) , 15095-15101
Photochemical synthesis of bimetallic CuNiSxquantum dots onto g-C3N4as a cocatalyst for high hydrogen evolution
CuNiSxQDs were fabricated onto g-C3N4by photochemical deposition method. The small size can expose more active S sites on the edge and the introduction of Cu2+into NiSxcan slightly modulate the electronic structure of Ni and S centers, thus weakening the S–Hadsbonds.
- 10 June 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (24) , 28129-28139
Dendrite-Free Anodes Enabled by a Composite of a ZnAl Alloy with a Copper Mesh for High-Performing Aqueous Zinc-Ion Batteries
Aqueous zinc-ion batteries (ZIBs) have attracted considerable attention because of their low cost, high intrinsic safety, and high volumetric capacity. However, unexpected dendrite growth and side reactions that arise at the Zn anode can severely hinder the mass adoption of ZIBs in practical applications. Herein, we report a dendrite-free ZIB anode via the hybridization of a eutectic ZnAl alloy with a copper mesh (denoted as [email protected]). The eutectic structure of the ZnAl alloy is composed of alternating Zn blocks and Al nanoflakes. The Al nanoflakes sacrificially consume the oxygen in the electrolyte to form an Al2O3/Al shell–core structure, which in turn guides the Zn deposition process by restraining the lateral diffusion of zinc ions and hence reducing the extent of dendrite formation. This process can synergistically reduce the likelihood of Zn passivation, which allows the Zn region to remain electrochemically active for the Zn stripping/plating process. Meanwhile, a copper mesh is used as a scaffold to provide uniform electric field distribution. As a result, the symmetric [email protected]//[email protected] cell presents appreciably low polarization (30 mV at 0.5 mA cm–2) and excellent cycling stability (240 h at 0.5 mA cm–2), as compared to Zn//Zn. Based on the postmortem investigation, [email protected] is able to retain a dendrite-free morphology after cycling at 1 mA cm–2, while significant dendrite formation can be observed for Zn. More impressively, the [email protected]//V2O5 full cell is able to achieve a 95% capacity retention after 2000 cycles at 2 A g–1, whereas its counterpart assembled with Zn fails after only 750 cycles because of short-circuit. Thus, the composite alloying strategy proposed in this work may provide an appealing direction toward the future development of dendrite-free anodes for rechargeable secondary batteries.
- 10 June 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (24) , 28129-28139
Dendrite-Free Anodes Enabled by a Composite of a ZnAl Alloy with a Copper Mesh for High-Performing Aqueous Zinc-Ion Batteries
Aqueous zinc-ion batteries (ZIBs) have attracted considerable attention because of their low cost, high intrinsic safety, and high volumetric capacity. However, unexpected dendrite growth and side reactions that arise at the Zn anode can severely hinder the mass adoption of ZIBs in practical applications. Herein, we report a dendrite-free ZIB anode via the hybridization of a eutectic ZnAl alloy with a copper mesh (denoted as [email protected]). The eutectic structure of the ZnAl alloy is composed of alternating Zn blocks and Al nanoflakes. The Al nanoflakes sacrificially consume the oxygen in the electrolyte to form an Al2O3/Al shell–core structure, which in turn guides the Zn deposition process by restraining the lateral diffusion of zinc ions and hence reducing the extent of dendrite formation. This process can synergistically reduce the likelihood of Zn passivation, which allows the Zn region to remain electrochemically active for the Zn stripping/plating process. Meanwhile, a copper mesh is used as a scaffold to provide uniform electric field distribution. As a result, the symmetric [email protected]//[email protected] cell presents appreciably low polarization (30 mV at 0.5 mA cm–2) and excellent cycling stability (240 h at 0.5 mA cm–2), as compared to Zn//Zn. Based on the postmortem investigation, [email protected] is able to retain a dendrite-free morphology after cycling at 1 mA cm–2, while significant dendrite formation can be observed for Zn. More impressively, the [email protected]//V2O5 full cell is able to achieve a 95% capacity retention after 2000 cycles at 2 A g–1, whereas its counterpart assembled with Zn fails after only 750 cycles because of short-circuit. Thus, the composite alloying strategy proposed in this work may provide an appealing direction toward the future development of dendrite-free anodes for rechargeable secondary batteries.
- 1 April 2019
- Published by Elsevier in Journal of Power Sources
- Vol. 418, 202-210
Study of pseudocapacitive contribution to superior energy storage of 3D heterostructure CoWO4/Co3O4 nanocone arrays
- 1 April 2019
- Published by Elsevier in Journal of Power Sources
- Vol. 418, 202-210
Study of pseudocapacitive contribution to superior energy storage of 3D heterostructure CoWO4/Co3O4 nanocone arrays
- 1 September 2018
- Published by Elsevier in Chemical Engineering Journal
- Vol. 347, 291-300
3D hierarchical CoWO4/Co3O4 nanowire arrays for asymmetric supercapacitors with high energy density
- 1 September 2018
- Published by Elsevier in Chemical Engineering Journal
- Vol. 347, 291-300
3D hierarchical CoWO4/Co3O4 nanowire arrays for asymmetric supercapacitors with high energy density