Jiheong Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiheong Kang has a total of 217 co-authors. Here are the top co-authors by number of shared publications:
Jooyeun Chong
Department of Chemistry Seoul National University Seoul Republic of Korea
9 shared publications- Hyunjun Kim
Seoul National University
7 shared publications - Seongjun Park
Seoul National University
6 shared publications Haeseung Lee
Seoul National University
5 shared publicationsWonbeom Lee
Korea Advanced Institute of Science and Technology (KAIST) 291 Daehak-ro
5 shared publications- Zhenan Bao
Department of Chemical Engineering, Stanford University, Stanford, USA
5 shared publications
Latest Publications
- Open Access
- 6 November 2026
- Published by Springer Nature in Nature Communications
Full-sunlight-driven photocatalytic recovery of critical metals from spent lithium-ion batteries via organic acid leaching
- 6 November 2026
- Published by Springer Nature in Nature Communications
Open AccessFull-sunlight-driven photocatalytic recovery of critical metals from spent lithium-ion batteries via organic acid leaching
- 29 October 2026
- Published by American Chemical Society (ACS) in Nano Letters
Direct Optical Lithography of Intrinsically Stretchable Colloidal Emissive Nanocrystals
Realizing high-resolution stretchable displays requires emissive materials that combine photopatternability with intrinsic stretchability. In colloidal nanocrystal films, however, the network formation needed for precise patterning often restricts molecular mobility, creating a fundamental trade-off with mechanical compliance. Here, we address this challenge using a benzophenone-based dual-crosslinker strategy that forms an elastomeric nanocrystal network. The tetrafunctional small-molecule crosslinker promotes efficient photopatterning, whereas the benzophenone-terminated polybutadiene crosslinker provides mechanical compliance. By tuning the crosslinker composition, the dual-crosslinking system enables direct optical patterning with line widths down to 2 μm and crack-free deformation up to 36% uniaxial strain. Both perovskite and InP-based nanocrystals largely retain their photoluminescence after processing, while the dual-crosslinking platform enables multicolor patterning and transfer to elastomeric substrates. QLEDs incorporating strained emissive layers maintain more than 90% of the maximum luminance of their unstretched counterparts. This dual-crosslinker design offers a general route to intrinsically stretchable, directly photopatternable colloidal nanocrystal emission layers.
- 29 October 2026
- Published by American Chemical Society (ACS) in Nano Letters
Direct Optical Lithography of Intrinsically Stretchable Colloidal Emissive Nanocrystals
Realizing high-resolution stretchable displays requires emissive materials that combine photopatternability with intrinsic stretchability. In colloidal nanocrystal films, however, the network formation needed for precise patterning often restricts molecular mobility, creating a fundamental trade-off with mechanical compliance. Here, we address this challenge using a benzophenone-based dual-crosslinker strategy that forms an elastomeric nanocrystal network. The tetrafunctional small-molecule crosslinker promotes efficient photopatterning, whereas the benzophenone-terminated polybutadiene crosslinker provides mechanical compliance. By tuning the crosslinker composition, the dual-crosslinking system enables direct optical patterning with line widths down to 2 μm and crack-free deformation up to 36% uniaxial strain. Both perovskite and InP-based nanocrystals largely retain their photoluminescence after processing, while the dual-crosslinking platform enables multicolor patterning and transfer to elastomeric substrates. QLEDs incorporating strained emissive layers maintain more than 90% of the maximum luminance of their unstretched counterparts. This dual-crosslinker design offers a general route to intrinsically stretchable, directly photopatternable colloidal nanocrystal emission layers.
- Open Access
- 30 September 2026
- Published by Springer Nature in Research Square
Harnessing a transient liquid-metal flux for the ultrafast photoforging of compositionally complex oxide nanoarchitectures
Synthesizing compositionally complex oxides (CCOs) from thermodynamically immiscible elements is fundamentally constrained by phase segregation during conventional prolonged thermal processing, which also degrades the underlying substrate. Here, we report an ultrafast synthesis strategy, termed photoforging, that couples a transient eutectic gallium–indium liquid-metal flux with a single 20 ms intense pulsed light (IPL) treatment. Under IPL, the flux ruptures and wets the nickel fiber surfaces, uniformly delivering and homogenizing disparate transition-metal precursors while forming a flash-induced Ni–Ga intermetallic layer that monolithically anchors the oxide coating; the concurrent rapid heating and quenching kinetically trap up to ten cations within a metastable, single-phase NiO rock-salt lattice. This process yields CCO nanoarchitectures—including vertically oriented, ultrathin nanosheets in select compositions—directly integrated onto the substrate. Exploiting this compositional versatility, we custom-design a binder-free high-surface-area quinary oxide electrode for water splitting that delivers exceptional activity and durability for both hydrogen and oxygen evolution reactions—one of many reaction-specific combinations accessible through this platform.
- 30 September 2026
- Published by Springer Nature in Research Square
Open AccessHarnessing a transient liquid-metal flux for the ultrafast photoforging of compositionally complex oxide nanoarchitectures
Synthesizing compositionally complex oxides (CCOs) from thermodynamically immiscible elements is fundamentally constrained by phase segregation during conventional prolonged thermal processing, which also degrades the underlying substrate. Here, we report an ultrafast synthesis strategy, termed photoforging, that couples a transient eutectic gallium–indium liquid-metal flux with a single 20 ms intense pulsed light (IPL) treatment. Under IPL, the flux ruptures and wets the nickel fiber surfaces, uniformly delivering and homogenizing disparate transition-metal precursors while forming a flash-induced Ni–Ga intermetallic layer that monolithically anchors the oxide coating; the concurrent rapid heating and quenching kinetically trap up to ten cations within a metastable, single-phase NiO rock-salt lattice. This process yields CCO nanoarchitectures—including vertically oriented, ultrathin nanosheets in select compositions—directly integrated onto the substrate. Exploiting this compositional versatility, we custom-design a binder-free high-surface-area quinary oxide electrode for water splitting that delivers exceptional activity and durability for both hydrogen and oxygen evolution reactions—one of many reaction-specific combinations accessible through this platform.
- Open Access
- 22 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (49)
Photoactivable Surfactant Design for In Situ Stabilization of Hydrogel Bioelectronics
Conductive polymer hydrogels offer unique advantages for soft, stretchable biointerfaces by combining tissue‐like mechanics with high ionic conductivity. However, their reliable integration with hydrophobic substrates and encapsulants essential for electrical insulation and chemical protection remains a major challenge due to poor wetting and interfacial delamination in aqueous environments. Here, we report a facile strategy for the in situ stabilization of conductive polymer hydrogels on hydrophobic substrates using a photoactivable surfactant (PAS). PAS reduces interfacial surface energy and, upon UV activation, forms covalent bonds with stretchable substrates, thereby yielding strong adhesion and long‐term stability under wet conditions. This molecular design also enables photopatterning of hydrogels without compromising performance. Notably, PAS not only stabilizes and patterns conductive hydrogels in situ but also enhances their mechanical and electrical properties. PAS‐integrated hydrogel biointerfaces exhibit robust operation in aqueous environments and demonstrate reliable in vivo electromyographic (EMG) signal recording, underscoring the potential of this approach for next‐generation implantable and wearable bioelectronics.
- 22 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (49)
Open AccessPhotoactivable Surfactant Design for In Situ Stabilization of Hydrogel Bioelectronics
Conductive polymer hydrogels offer unique advantages for soft, stretchable biointerfaces by combining tissue‐like mechanics with high ionic conductivity. However, their reliable integration with hydrophobic substrates and encapsulants essential for electrical insulation and chemical protection remains a major challenge due to poor wetting and interfacial delamination in aqueous environments. Here, we report a facile strategy for the in situ stabilization of conductive polymer hydrogels on hydrophobic substrates using a photoactivable surfactant (PAS). PAS reduces interfacial surface energy and, upon UV activation, forms covalent bonds with stretchable substrates, thereby yielding strong adhesion and long‐term stability under wet conditions. This molecular design also enables photopatterning of hydrogels without compromising performance. Notably, PAS not only stabilizes and patterns conductive hydrogels in situ but also enhances their mechanical and electrical properties. PAS‐integrated hydrogel biointerfaces exhibit robust operation in aqueous environments and demonstrate reliable in vivo electromyographic (EMG) signal recording, underscoring the potential of this approach for next‐generation implantable and wearable bioelectronics.
- Open Access
- 15 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (29) , eaee6417
Reduction of appearance artifacts in wearable on-skin electronics.
Facial electrophysiological signals are crucial to human-machine interfaces and health care monitoring. Soft and skin-conformable electrodes enabled long-term and comfortable signal monitoring. However, the appearance of the electrodes affects the wearer's social interactions and self-identity, making daily usage difficult and leaving appearance artifacts. Here, we developed fully invisible and unperceivable on-skin electrodes free from appearance artifacts. Neither the wearer nor observers can detect the visual and tactile presence of the electrodes on the skin. The unperceivable property was confirmed with sensory experiments and physical characterizations of the film on skin. Furthermore, our invisible electrodes did not affect the psychological conditions of the wearers, which confirms the feasibility of artifact-free monitoring in daily lives. Last, we demonstrated the functionality of our electrode with successful monitoring of various facial electrophysiological signals, including electrooculogram (EOG), electromyogram (EMG), and electroencephalogram (EEG). Our fully invisible electrodes provide a promising direction in developing on-skin bioelectronics, seamlessly integrating health monitoring and human-computer interaction technologies into people's daily lives.
- 15 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (29) , eaee6417
Open AccessReduction of appearance artifacts in wearable on-skin electronics.
Facial electrophysiological signals are crucial to human-machine interfaces and health care monitoring. Soft and skin-conformable electrodes enabled long-term and comfortable signal monitoring. However, the appearance of the electrodes affects the wearer's social interactions and self-identity, making daily usage difficult and leaving appearance artifacts. Here, we developed fully invisible and unperceivable on-skin electrodes free from appearance artifacts. Neither the wearer nor observers can detect the visual and tactile presence of the electrodes on the skin. The unperceivable property was confirmed with sensory experiments and physical characterizations of the film on skin. Furthermore, our invisible electrodes did not affect the psychological conditions of the wearers, which confirms the feasibility of artifact-free monitoring in daily lives. Last, we demonstrated the functionality of our electrode with successful monitoring of various facial electrophysiological signals, including electrooculogram (EOG), electromyogram (EMG), and electroencephalogram (EEG). Our fully invisible electrodes provide a promising direction in developing on-skin bioelectronics, seamlessly integrating health monitoring and human-computer interaction technologies into people's daily lives.
- 19 June 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (15) , 7776-7791
A disulfide–Fe 3+ crosslinking strategy for tough hydrogel networks with complete photo- and biochemical degradability
A disulfide–Fe 3+ crosslinking strategy enables tough double-network hydrogels with complete photo- and biochemical degradability, combining mechanical robustness with controllable dual degradation.
- 19 June 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (15) , 7776-7791
A disulfide–Fe 3+ crosslinking strategy for tough hydrogel networks with complete photo- and biochemical degradability
A disulfide–Fe 3+ crosslinking strategy enables tough double-network hydrogels with complete photo- and biochemical degradability, combining mechanical robustness with controllable dual degradation.
- Open Access
- 2 May 2026
- Published by Springer Nature in Nano Convergence
- Vol. 13 (1) , 18
Design guidelines for self-healing materials in soft electronics
Soft electronic devices require durability to endure their inherent exposure to diverse mechanical deformations, including scratches, punctures, and repeat
- 2 May 2026
- Published by Springer Nature in Nano Convergence
- Vol. 13 (1) , 18
Open AccessDesign guidelines for self-healing materials in soft electronics
Soft electronic devices require durability to endure their inherent exposure to diverse mechanical deformations, including scratches, punctures, and repeat
- Open Access
- 30 April 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 55 (11) , 6117-6154
Laser-induced polymer dynamics and applications
In this review, we introduce the latest discoveries in the interaction of lasers with various functional polymers, discussing energy delivery mechanisms and their influence on structure modifications and property changes.
- 30 April 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 55 (11) , 6117-6154
Open AccessLaser-induced polymer dynamics and applications
In this review, we introduce the latest discoveries in the interaction of lasers with various functional polymers, discussing energy delivery mechanisms and their influence on structure modifications and property changes.
- Open Access
- 12 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (33) , e10532
A Cryoprotectant‐Compatible Nanoporous Platform for Stable and Scalable Delivery of Biopharmaceuticals
CRISPR‐Cas9 ribonucleoproteins (RNPs) represent a promising class of biopharmaceuticals for treating genetic and complex diseases. However, their clinical translation is limited by instability during storage and delivery. Lyophilization offers a potential solution, though conventional approaches often compromise structural integrity and bioactivity under non‐cryogenic conditions. Here, we have developed a nanostructured delivery platform, designated Nano Banker & Blowball (NB 2 ), which features a blowball‐like architecture and tunable nanoscale pores. These pores are designed to protect RNPs and enable controlled release. The freeze‐dried formulation (FNB 2 ) integrates optimized cryoprotectants and a surface‐engineered nanoparticle design, preserving morphology and function without excessive excipients. FNB 2 exhibits rapid rehydration and retains ∼70% of gene editing activity post‐lyophilization, enabling robust functional gene editing in vitro and in vivo. It also maintains long‐term stability and supports efficient cellular uptake, enabling administration via multiple routes. FNB 2 represents a scalable and robust platform for genetic therapeutics, vaccines, and biologics, particularly well‐suited for resource‐limited and emergency medical applications.
- 12 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (33) , e10532
Open AccessA Cryoprotectant‐Compatible Nanoporous Platform for Stable and Scalable Delivery of Biopharmaceuticals
CRISPR‐Cas9 ribonucleoproteins (RNPs) represent a promising class of biopharmaceuticals for treating genetic and complex diseases. However, their clinical translation is limited by instability during storage and delivery. Lyophilization offers a potential solution, though conventional approaches often compromise structural integrity and bioactivity under non‐cryogenic conditions. Here, we have developed a nanostructured delivery platform, designated Nano Banker & Blowball (NB 2 ), which features a blowball‐like architecture and tunable nanoscale pores. These pores are designed to protect RNPs and enable controlled release. The freeze‐dried formulation (FNB 2 ) integrates optimized cryoprotectants and a surface‐engineered nanoparticle design, preserving morphology and function without excessive excipients. FNB 2 exhibits rapid rehydration and retains ∼70% of gene editing activity post‐lyophilization, enabling robust functional gene editing in vitro and in vivo. It also maintains long‐term stability and supports efficient cellular uptake, enabling administration via multiple routes. FNB 2 represents a scalable and robust platform for genetic therapeutics, vaccines, and biologics, particularly well‐suited for resource‐limited and emergency medical applications.
- Open Access
- 12 March 2026
- Published by Springer Nature in Research Square
Supersoft yet tough bottlebrush polymers via dynamic domain exchange
Biological tissues exhibit a unique combination of supersoft mechanics and high toughness, a property pairing rarely achieved in synthetic solids. Replicating this duality in solvent-free synthetic polymers remains a fundamental challenge, as the strategies required for supersoftness and high toughness are inherently incompatible. Here, we present a bottlebrush polymer design strategy featuring unique dynamic domain exchange behavior that simultaneously achieves tissue-level softness and high fracture toughness. Our BBPs form physically crosslinked, dynamic networks with suppressed entanglements and dynamic domain exchange under deformation, allowing rapid network reconstruction and efficient energy dissipation under strain. As a result, the material exhibits tissue-like softness (E≈40 kPa), ultra-high stretchability (~1,300%), and exceptional toughness (~9,300 J m⁻²). This unique combination enables conformal yet mechanically robust integration with biological tissue, significantly reducing foreign-body responses and sustaining long-term in vivo stability.
- 12 March 2026
- Published by Springer Nature in Research Square
Open AccessSupersoft yet tough bottlebrush polymers via dynamic domain exchange
Biological tissues exhibit a unique combination of supersoft mechanics and high toughness, a property pairing rarely achieved in synthetic solids. Replicating this duality in solvent-free synthetic polymers remains a fundamental challenge, as the strategies required for supersoftness and high toughness are inherently incompatible. Here, we present a bottlebrush polymer design strategy featuring unique dynamic domain exchange behavior that simultaneously achieves tissue-level softness and high fracture toughness. Our BBPs form physically crosslinked, dynamic networks with suppressed entanglements and dynamic domain exchange under deformation, allowing rapid network reconstruction and efficient energy dissipation under strain. As a result, the material exhibits tissue-like softness (E≈40 kPa), ultra-high stretchability (~1,300%), and exceptional toughness (~9,300 J m⁻²). This unique combination enables conformal yet mechanically robust integration with biological tissue, significantly reducing foreign-body responses and sustaining long-term in vivo stability.