Xuezhen Chen
Research Subjects
Research Interests
Xuezhen Chen has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Yuanmeng Xia
School of Mechanical and Electrical Engineering, University Of Electronic Science And Technology Of China, Chengdu, China
4 shared publicationsGuobo Zhao
AVIC Chengdu Aircraft Industrial (Group) CO., LTD., 610092 Chengdu, Sichuan, China
3 shared publicationsYi He
AVIC Chengdu Aircraft Industrial (Group) CO., LTD., 610092, Chengdu, Sichuan, China
3 shared publicationsYing Li
AVIC Chengdu Aircraft Industrial (Group) CO., LTD., 610092, Chengdu, Sichuan, China
3 shared publicationsHai Li
School of Mechanical and Electrical Engineering, University Of Electronic Science And Technology Of China, Chengdu, China
2 shared publicationsLianyu Li
AVIC Chengdu Aircraft Industrial (Group)CO., LTD., 610092, Chengdu, Sichuan, China
2 shared publications
Latest Publications
- Open Access
TREM2 promotes glioma progression and angiogenesis mediated by microglia/brain macrophages
Triggering receptor expressed on myeloid cell 2 (TREM2), a myeloid cell‐specific signaling molecule, controls essential functions of microglia and impacts on the pathogenesis of Alzheimer's disease and other neurodegenerative disorders. TREM2 is also highly expressed in tumor‐associated macrophages in different types of cancer. Here, we studied whether TREM2 influences glioma progression. We found a gender‐dependent effect of glioma growth in wild‐type (WT) animals injected with GL261‐EGFP glioma cells. Most importantly, TREM2 promotes glioma progression in male but not female animals. The accumulation of glioma‐associated microglia/macrophages (GAMs) and CD31+ blood vessel density is reduced in male TREM2‐deficient mice. A transcriptomic analysis of glioma tissue revealed that TREM2 deficiency suppresses immune‐related genes. In an organotypic slice model devoid of functional vascularization and immune components from periphery, the tumor size was not affected by TREM2‐deficiency. In human resection samples from glioblastoma, TREM2 is upregulated in GAMs. Based on the Cancer Genome Atlas Program (TCGA) and the Chinese Glioma Genome Atlas (CGGA) databases, the TREM2 expression levels were negatively correlated with survival. Thus, the TREM2‐dependent crosstalk between GAMs and the vasculature formation promotes glioma growth.
Open AccessTREM2 promotes glioma progression and angiogenesis mediated by microglia/brain macrophages
Triggering receptor expressed on myeloid cell 2 (TREM2), a myeloid cell‐specific signaling molecule, controls essential functions of microglia and impacts on the pathogenesis of Alzheimer's disease and other neurodegenerative disorders. TREM2 is also highly expressed in tumor‐associated macrophages in different types of cancer. Here, we studied whether TREM2 influences glioma progression. We found a gender‐dependent effect of glioma growth in wild‐type (WT) animals injected with GL261‐EGFP glioma cells. Most importantly, TREM2 promotes glioma progression in male but not female animals. The accumulation of glioma‐associated microglia/macrophages (GAMs) and CD31+ blood vessel density is reduced in male TREM2‐deficient mice. A transcriptomic analysis of glioma tissue revealed that TREM2 deficiency suppresses immune‐related genes. In an organotypic slice model devoid of functional vascularization and immune components from periphery, the tumor size was not affected by TREM2‐deficiency. In human resection samples from glioblastoma, TREM2 is upregulated in GAMs. Based on the Cancer Genome Atlas Program (TCGA) and the Chinese Glioma Genome Atlas (CGGA) databases, the TREM2 expression levels were negatively correlated with survival. Thus, the TREM2‐dependent crosstalk between GAMs and the vasculature formation promotes glioma growth.
- Open Access
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 615 (1) , 012021
The Study on Applied Status Stability of Water-Based Cutting Fluids at Numerical Control Machining of Aviation Aluminum Alloy
When water-based cutting fluid is used in aviation aluminum alloy NC machining, soap precipitation and emulsification often occur due to its poor stability. It can cause the metal plate or equipment parts to scale or block the cutting fluid pipeline and filter system, which seriously affects the service life of the cutting fluid and the normal use of the equipment. At present, there is a lack of suitable evaluation standard for the stability of application state of water-based cutting fluid. In this paper, through the analysis of the state stability of four kinds of water-based cutting fluids, the state stability evaluation test is formulated. The hard water stability test and emulsion stability test are carried out for two kinds of semi synthetic cutting fluid and two kinds of fully synthetic cutting fluid. The test results show that this evaluation test can effectively evaluate the state stability performance of aviation aluminum alloy cutting fluid, and provide guidance for the optimization and management of cutting fluid in numerical control machining.
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 615 (1) , 012021
Open AccessThe Study on Applied Status Stability of Water-Based Cutting Fluids at Numerical Control Machining of Aviation Aluminum Alloy
When water-based cutting fluid is used in aviation aluminum alloy NC machining, soap precipitation and emulsification often occur due to its poor stability. It can cause the metal plate or equipment parts to scale or block the cutting fluid pipeline and filter system, which seriously affects the service life of the cutting fluid and the normal use of the equipment. At present, there is a lack of suitable evaluation standard for the stability of application state of water-based cutting fluid. In this paper, through the analysis of the state stability of four kinds of water-based cutting fluids, the state stability evaluation test is formulated. The hard water stability test and emulsion stability test are carried out for two kinds of semi synthetic cutting fluid and two kinds of fully synthetic cutting fluid. The test results show that this evaluation test can effectively evaluate the state stability performance of aviation aluminum alloy cutting fluid, and provide guidance for the optimization and management of cutting fluid in numerical control machining.
- 17 November 2020
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 235 (4) , 594-604
Fault diagnosis of flexible production line machining center based on PCA and ABC-LVQ
A fault diagnosis method of flexible production line machining center based on principal component analysis (PCA) and artificial bee colony based learning vector quantization (ABC-LVQ) neural network is proposed to target the issue of key vulnerable parts of the flexible production line machining center. Along with that, a general scheme of fault diagnosis is designed according to the characteristics of flexible production line which includes multiple machining centers. Firstly, the acceleration sensor is used to collect the vibration signals of the key and critical components of the flexible production line machining center, to analyze and pick up the multi-information characteristics, the time domain, the frequency domain and the time-frequency domain of the signals. Then, in order to reduce the dimension of the eigenvector, PCA is adopted to realize such reduction. Finally, aiming at the problem that LVQ neural network is sensitive to the initial value weights, an ABC algorithm is proposed to quickly obtain excellent initial weights vector of LVQ neural network, which can accurately classify all kinds of faults. The experimental results show that the scheme can diagnose and monitor several key components of horizontal machining center of flexible production line in a quick and accurate manner.
- 17 November 2020
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 235 (4) , 594-604
Fault diagnosis of flexible production line machining center based on PCA and ABC-LVQ
A fault diagnosis method of flexible production line machining center based on principal component analysis (PCA) and artificial bee colony based learning vector quantization (ABC-LVQ) neural network is proposed to target the issue of key vulnerable parts of the flexible production line machining center. Along with that, a general scheme of fault diagnosis is designed according to the characteristics of flexible production line which includes multiple machining centers. Firstly, the acceleration sensor is used to collect the vibration signals of the key and critical components of the flexible production line machining center, to analyze and pick up the multi-information characteristics, the time domain, the frequency domain and the time-frequency domain of the signals. Then, in order to reduce the dimension of the eigenvector, PCA is adopted to realize such reduction. Finally, aiming at the problem that LVQ neural network is sensitive to the initial value weights, an ABC algorithm is proposed to quickly obtain excellent initial weights vector of LVQ neural network, which can accurately classify all kinds of faults. The experimental results show that the scheme can diagnose and monitor several key components of horizontal machining center of flexible production line in a quick and accurate manner.
- Open Access
- 1 November 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1676 (1) , 012142
A Zero Point Offset Monitoring Method of Rotation Axis Based on Siemens 840D System
In order to monitor the abnormal condition that the zero point of the encoder does not coincide with the actual mechanical zero position in the full-closed control loop of a rotating axis, a Siemens 840D numerical control system based on abnormal condition inspection method is proposed. According to the gathered data by the measurement system of a rotating axis servo motor, the logical comparison program in PLC (Programmable Logic Controller) is developed to monitor the zero point of rotating axis by using Siemens 840D numerical control system and STEP7 software platform. The verification experiment results show that the proposed method can quickly identify the abnormal displacement of the zero point for a rotating axis and disable the servo motor in time, which can effectively avoid the poor quality problem caused by the abnormal condition in rotating axis.
- 1 November 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1676 (1) , 012142
Open AccessA Zero Point Offset Monitoring Method of Rotation Axis Based on Siemens 840D System
In order to monitor the abnormal condition that the zero point of the encoder does not coincide with the actual mechanical zero position in the full-closed control loop of a rotating axis, a Siemens 840D numerical control system based on abnormal condition inspection method is proposed. According to the gathered data by the measurement system of a rotating axis servo motor, the logical comparison program in PLC (Programmable Logic Controller) is developed to monitor the zero point of rotating axis by using Siemens 840D numerical control system and STEP7 software platform. The verification experiment results show that the proposed method can quickly identify the abnormal displacement of the zero point for a rotating axis and disable the servo motor in time, which can effectively avoid the poor quality problem caused by the abnormal condition in rotating axis.
- Open Access
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 793 (1)
Electrical control design of CNC equipment fault based on part quality
Aeronautical structure component has high value and complex shape, normally manufacturing by advanced five-axis CNC machine tools, but sometimes random failures also occur. Therefore, this research focuses on how to predict the failure, imply redundancy design technique and minimize part quality risk as much as possible. This article first analyses quality risk caused by device failure in manufacturing and introduces several axis movements during alarm occurring, then studies the influence of accuracy in movements and optimizes by the electrical and external power grid redundancy design. At last this article carries out engineering verification though practice application and reduces the quality risk from device failure in order to prepare quality insurance system in intelligent manufacturing.
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 793 (1)
Open AccessElectrical control design of CNC equipment fault based on part quality
Aeronautical structure component has high value and complex shape, normally manufacturing by advanced five-axis CNC machine tools, but sometimes random failures also occur. Therefore, this research focuses on how to predict the failure, imply redundancy design technique and minimize part quality risk as much as possible. This article first analyses quality risk caused by device failure in manufacturing and introduces several axis movements during alarm occurring, then studies the influence of accuracy in movements and optimizes by the electrical and external power grid redundancy design. At last this article carries out engineering verification though practice application and reduces the quality risk from device failure in order to prepare quality insurance system in intelligent manufacturing.
- Open Access
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 793 (1)
Research and application on rapid recognition of CNC machine tools’ running state
A rapid recognition of CNC (Computer Numerical Control) machine tools’ running state based on time domain characteristic parameters and frequency domain correlation coefficient was proposed. The experiment proved the accuracy and efficiency of the mentioned method, which made the states recognition rate reach 93.33% and the identification efficiency improve 66.67%. In this scenario, a theoretical foundation is established for the condition-based maintenance of CNC machine tools.
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 793 (1)
Open AccessResearch and application on rapid recognition of CNC machine tools’ running state
A rapid recognition of CNC (Computer Numerical Control) machine tools’ running state based on time domain characteristic parameters and frequency domain correlation coefficient was proposed. The experiment proved the accuracy and efficiency of the mentioned method, which made the states recognition rate reach 93.33% and the identification efficiency improve 66.67%. In this scenario, a theoretical foundation is established for the condition-based maintenance of CNC machine tools.
- Open Access
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 793 (1)
Fault diagnosis of mechanical spindle drive chain based on time-frequency domain characteristics
As a key component of CNC (computer numerical control) machines, spindle’s performance directly affects the performance of machines. The mechanical spindle, which is often used in the processing of complex aeronautical structures such as titanium alloys, has the characteristics of large torque and impact resistance. However, its long drive chain and complex structure make it difficult to effectively forewarn and diagnose its faults. In this paper, a fault forewarning and diagnosis method is designed, which is based on the analysis of characteristics of vibration time-frequency domain of mechanical spindle. Firstly, a method for calculating the frequency characteristics of key components in the drive chain of mechanical spindle is proposed, and the signal characteristics of vibration are obtained. Secondly, according to the position and layout of each component in the spindle drive chain, the layout scheme of signal acquisition points is designed based on the principle of point-to-surface integration. This scheme ensures that the signals of each point can not only reflect the state of the spindle, but also reflect the vibration characteristics of different parts. Variable speed test is carried out on different equipment of the same type, and the signals processed by Fourier transform, and the frequency domain signals at different speeds are obtained. The time-frequency signal of the spindle is analyzed to find its vibration characteristics. Combining with the results of theoretical calculation, the working state of the spindle and the working performance of each component, as well as the specific fault parts and types of fault are obtained. Through experimental verification, the method proposed in this paper effectively improves the ability of working state monitoring and fault diagnosis of the spindle system.
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 793 (1)
Open AccessFault diagnosis of mechanical spindle drive chain based on time-frequency domain characteristics
As a key component of CNC (computer numerical control) machines, spindle’s performance directly affects the performance of machines. The mechanical spindle, which is often used in the processing of complex aeronautical structures such as titanium alloys, has the characteristics of large torque and impact resistance. However, its long drive chain and complex structure make it difficult to effectively forewarn and diagnose its faults. In this paper, a fault forewarning and diagnosis method is designed, which is based on the analysis of characteristics of vibration time-frequency domain of mechanical spindle. Firstly, a method for calculating the frequency characteristics of key components in the drive chain of mechanical spindle is proposed, and the signal characteristics of vibration are obtained. Secondly, according to the position and layout of each component in the spindle drive chain, the layout scheme of signal acquisition points is designed based on the principle of point-to-surface integration. This scheme ensures that the signals of each point can not only reflect the state of the spindle, but also reflect the vibration characteristics of different parts. Variable speed test is carried out on different equipment of the same type, and the signals processed by Fourier transform, and the frequency domain signals at different speeds are obtained. The time-frequency signal of the spindle is analyzed to find its vibration characteristics. Combining with the results of theoretical calculation, the working state of the spindle and the working performance of each component, as well as the specific fault parts and types of fault are obtained. Through experimental verification, the method proposed in this paper effectively improves the ability of working state monitoring and fault diagnosis of the spindle system.
- 12 February 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 107 (1-2) , 85-96
Thermal error detection and compensation technology for spindle of horizontal CNC machine tool with large torque
- 12 February 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 107 (1-2) , 85-96
Thermal error detection and compensation technology for spindle of horizontal CNC machine tool with large torque
- 8 June 2019
- Published by Springer Nature in Lecture Notes in Electrical Engineering
- p. 2952-2964
Research on State Monitoring of CNC Machine Tool Based on Dual Dimension Feature
- 8 June 2019
- Published by Springer Nature in Lecture Notes in Electrical Engineering
- p. 2952-2964
Research on State Monitoring of CNC Machine Tool Based on Dual Dimension Feature
- 22 December 2018
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 233 (11) , 2147-2159
Research on fault early warning and the diagnosis of machine tools based on energy fault tree analysis
At present, the status of the monitoring of computerized numerical control machine tools is still in the initial stage, and there is no uniform standard for fault early warning and diagnosis of machine tools. A standardized and comprehensive machine tool condition monitoring method based on energy fault tree analysis is proposed. The power, current and temperature inside the numerical control system and the signal of the external vibration sensor are collectively referred to as energy. A new energy fault tree is used to identify the location of the fault. At the same time, the client of computerized numerical control system internal information collection and analysis is developed. The characteristic frequency of each key component is analysed by theoretical mechanics, and an overall monitoring method is proposed to improve the monitoring efficiency. Finally, the reliability of the monitoring method is verified by experiments. The surface roughness of the parts is reduced by approximately 50%, which lays the foundation for the application of the engineering.
- 22 December 2018
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 233 (11) , 2147-2159
Research on fault early warning and the diagnosis of machine tools based on energy fault tree analysis
At present, the status of the monitoring of computerized numerical control machine tools is still in the initial stage, and there is no uniform standard for fault early warning and diagnosis of machine tools. A standardized and comprehensive machine tool condition monitoring method based on energy fault tree analysis is proposed. The power, current and temperature inside the numerical control system and the signal of the external vibration sensor are collectively referred to as energy. A new energy fault tree is used to identify the location of the fault. At the same time, the client of computerized numerical control system internal information collection and analysis is developed. The characteristic frequency of each key component is analysed by theoretical mechanics, and an overall monitoring method is proposed to improve the monitoring efficiency. Finally, the reliability of the monitoring method is verified by experiments. The surface roughness of the parts is reduced by approximately 50%, which lays the foundation for the application of the engineering.