A. M. Mahfuz-Ur-Rahman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
A. M. Mahfuz-Ur-Rahman has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Rabiul Islam
University of Wollongong
15 shared publications - Danny Sutanto
Australian Power and Energy Research Institute, School of Electrical, Computer and Telecommunications Engineering, University of Wollongong, Wollongong, NSW, Australia
8 shared publications - Kashem Mohammad Muttaqi
University of Wollongong
7 shared publications Kashem M. Muttaqi
School of Electrical, Computer and Telecommunications Engineering, University of Wollongong, Wollongong, NSW, Australia
5 shared publications- Ashib Rahman
School of Electrical, Computer and Telecommunications Engineering, Faculty of Engineering and Information Sciences, University of Wollongong, Wollongong, NSW, Australia
3 shared publications Danny Sutanto
3 shared publications
Latest Publications
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (4) , 3878-3887
An Advanced Modulation Technique for Transformerless Grid Connected Inverter Circuits Used in Solar Photovoltaic Systems
This article presents a new current peak point tracking third harmonic injected bus clamping pulsewidth modulation (CPPTTHBCPWM) technique for effective active and reactive power control in a transformerless H5 solar photovoltaic inverter. The proposed technique reduces the switching loss compared to that of the traditional switching technique by using a new reference signal and eliminating unwanted gate pulses. The proposed CPPTTHBCPWM technique ensures better utilization of the dc bus voltage, lowers the total harmonic distortion, and lowers the converter loss compared to the conventional modulation techniques. The proposed modulation technique also reduces the thermal stress in the switching devices and increases the power converter lifetime. The proposed modulation technique is simulated in MATLAB/Simulink environment and validated in the laboratory using a reduced-scale prototype test platform.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (4) , 3878-3887
An Advanced Modulation Technique for Transformerless Grid Connected Inverter Circuits Used in Solar Photovoltaic Systems
This article presents a new current peak point tracking third harmonic injected bus clamping pulsewidth modulation (CPPTTHBCPWM) technique for effective active and reactive power control in a transformerless H5 solar photovoltaic inverter. The proposed technique reduces the switching loss compared to that of the traditional switching technique by using a new reference signal and eliminating unwanted gate pulses. The proposed CPPTTHBCPWM technique ensures better utilization of the dc bus voltage, lowers the total harmonic distortion, and lowers the converter loss compared to the conventional modulation techniques. The proposed modulation technique also reduces the thermal stress in the switching devices and increases the power converter lifetime. The proposed modulation technique is simulated in MATLAB/Simulink environment and validated in the laboratory using a reduced-scale prototype test platform.
- 27 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (2) , 2574-2585
A New Hybrid Multilevel Inverter Topology With Level Shifted Multicarrier PWM Technique for Harvesting Renewable Energy
This paper presents a new hybrid three-phase cascaded modular multilevel inverter developed with reduced switch count for harvesting renewable energy. The basic module of the proposed inverter consists of six switches, three asymmetric dc links, and two blocking diodes. The inverter can generate six positive voltage states, which are negatively polarized by the end-side H-bridge unit. As a result, higher number of voltage levels are obtained with minimum number of switches that ensure reduced total harmonic distortion in the grid current. Additionally, the proposed inverter can operate at comparatively lower switching frequency, which decreases the switching loss. Most of the switches in each individual module conduct for a small period resulting in low conduction losses. The reduced switch count with the low switching and conduction losses increases the compactness and the efficiency of the proposed inverter. Multiple high-frequency magnetic links are utilized for the dc sources required for the proposed inverter to achieve inherent dc-link voltage balancing ability and galvanic isolation. The performance of the proposed inverter is validated by simulation and experimental investigations.
- 27 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (2) , 2574-2585
A New Hybrid Multilevel Inverter Topology With Level Shifted Multicarrier PWM Technique for Harvesting Renewable Energy
This paper presents a new hybrid three-phase cascaded modular multilevel inverter developed with reduced switch count for harvesting renewable energy. The basic module of the proposed inverter consists of six switches, three asymmetric dc links, and two blocking diodes. The inverter can generate six positive voltage states, which are negatively polarized by the end-side H-bridge unit. As a result, higher number of voltage levels are obtained with minimum number of switches that ensure reduced total harmonic distortion in the grid current. Additionally, the proposed inverter can operate at comparatively lower switching frequency, which decreases the switching loss. Most of the switches in each individual module conduct for a small period resulting in low conduction losses. The reduced switch count with the low switching and conduction losses increases the compactness and the efficiency of the proposed inverter. Multiple high-frequency magnetic links are utilized for the dc sources required for the proposed inverter to achieve inherent dc-link voltage balancing ability and galvanic isolation. The performance of the proposed inverter is validated by simulation and experimental investigations.
- 27 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (6) , 6659-6668
An Effective Energy Management With Advanced Converter and Control for a PV-Battery Storage Based Microgrid to Improve Energy Resiliency
This article presents an energy management strategy for a microgrid having solar PV arrays and a battery energy storage system (BESS). Most of the energy management strategy used for commercial photovoltaic (PV) inverters and battery inverters do not consider the future load behavior and cannot ensure the energy resiliency for a PV and battery storage based microgrid. This article proposes the use of a model predictive control strategy that considers future load behavior and energy cost profile to determine an optimum power flow trajectory to achieve energy resiliency, minimize the operating cost and maximize the profit of the microgrid. The proposed control strategy of the energy management system (EMS) is validated using both simulations in MATLAB/Simulink environment and by carrying out laboratory experiments on a developed laboratory test platform. For the converters of the test platform, this article develops a magnetically linked seven-level multilevel converter (acting as the solar PV inverter) and a full-bridge inverter with an advanced pulsewidth modulation technique (acting as the BESS inverter). Commercial inverters usually require large and bulky power frequency transformers for the grid integration of renewable energy sources. The high-frequency magnetic link-based power electronic converter can produce multiple balanced dc power sources with reduced size, ensures lower power losses during the energy conversion process and can also ensure galvanic isolation. The results from the simulation and experimental studies of the EMS demonstrate that the developed energy management strategy ensures both the minimization of the operating cost of the system and the increased resiliency of the whole system.
- 27 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (6) , 6659-6668
An Effective Energy Management With Advanced Converter and Control for a PV-Battery Storage Based Microgrid to Improve Energy Resiliency
This article presents an energy management strategy for a microgrid having solar PV arrays and a battery energy storage system (BESS). Most of the energy management strategy used for commercial photovoltaic (PV) inverters and battery inverters do not consider the future load behavior and cannot ensure the energy resiliency for a PV and battery storage based microgrid. This article proposes the use of a model predictive control strategy that considers future load behavior and energy cost profile to determine an optimum power flow trajectory to achieve energy resiliency, minimize the operating cost and maximize the profit of the microgrid. The proposed control strategy of the energy management system (EMS) is validated using both simulations in MATLAB/Simulink environment and by carrying out laboratory experiments on a developed laboratory test platform. For the converters of the test platform, this article develops a magnetically linked seven-level multilevel converter (acting as the solar PV inverter) and a full-bridge inverter with an advanced pulsewidth modulation technique (acting as the BESS inverter). Commercial inverters usually require large and bulky power frequency transformers for the grid integration of renewable energy sources. The high-frequency magnetic link-based power electronic converter can produce multiple balanced dc power sources with reduced size, ensures lower power losses during the energy conversion process and can also ensure galvanic isolation. The results from the simulation and experimental studies of the EMS demonstrate that the developed energy management strategy ensures both the minimization of the operating cost of the system and the increased resiliency of the whole system.
- 12 April 2021
- Published by Taylor & Francis
- p. 37-72
Magnetic Linked Power Converter for Transformer-Less Direct Grid Integration of Renewable Generation Systems
Renewable energy-based power plants are increasingly used to fulfill the rapidly increasing electrical load demand because renewable energy plants are clean, eco-friendly, and environmentally sustainable. They also require less time for plant installation compared to traditional fossil fuel-based power plants. Power converters play an important role in the grid integration of renewable energy sources. The traditional low-voltage power converter utilizes a power frequency transformer and a line filter to integrate the renewable energy sources with the power grid, but they are heavy and bulky. Recently, medium-voltage power converters that do not require power frequency transformers and line filters are becoming increasingly popular. This chapter aims to review different power converter topologies with different switching and control strategies for the grid integration of renewable energy sources. The chapter also presents current research activities and possible future directions for the power converter topologies in a grid-connected renewable energy power conversion system.
- 12 April 2021
- Published by Taylor & Francis
- p. 37-72
Magnetic Linked Power Converter for Transformer-Less Direct Grid Integration of Renewable Generation Systems
Renewable energy-based power plants are increasingly used to fulfill the rapidly increasing electrical load demand because renewable energy plants are clean, eco-friendly, and environmentally sustainable. They also require less time for plant installation compared to traditional fossil fuel-based power plants. Power converters play an important role in the grid integration of renewable energy sources. The traditional low-voltage power converter utilizes a power frequency transformer and a line filter to integrate the renewable energy sources with the power grid, but they are heavy and bulky. Recently, medium-voltage power converters that do not require power frequency transformers and line filters are becoming increasingly popular. This chapter aims to review different power converter topologies with different switching and control strategies for the grid integration of renewable energy sources. The chapter also presents current research activities and possible future directions for the power converter topologies in a grid-connected renewable energy power conversion system.
- 16 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (6) , 7145-7155
Model Predictive Control for a New Magnetic Linked Multilevel Inverter to Integrate Solar Photovoltaic Systems With the Power Grids
The multilevel inverters are becoming increasingly popular for use in the grid integration of wind and photovoltaic (PV) power plants due to their higher voltage handling capability and the better output power quality. There are several types of multilevel inverters that have been proposed in the literature; among them the active neutral point clamp (ANPC) multilevel inverters have been drawing significant attention specially for solving the problems with other multilevel inverters. However, with the increase of number of levels, the ANPC requires more electronic switches and flying capacitors, by which the complexity and the cost increases. In this paper, an ANPC inverter with a reduced number of switches and flying capacitors is presented for the grid integration of the solar PV systems controlled using the model predictive control technique. The proposed power converter effectively utilizes the dc bus voltage more when compared with the traditional ANPC converter. In the proposed inverter, a high frequency transformer is used to eliminate the voltage balancing problems faced by the traditional ANPC inverters. The proposed magnetic linked power converter provides the galvanic isolation, which is one of the most critical issues for traditional transformer-less grid connected PV systems. The proposed topology makes the control strategy simple and makes the power conversion system reliable for the photovoltaic power plants.
- 16 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (6) , 7145-7155
Model Predictive Control for a New Magnetic Linked Multilevel Inverter to Integrate Solar Photovoltaic Systems With the Power Grids
The multilevel inverters are becoming increasingly popular for use in the grid integration of wind and photovoltaic (PV) power plants due to their higher voltage handling capability and the better output power quality. There are several types of multilevel inverters that have been proposed in the literature; among them the active neutral point clamp (ANPC) multilevel inverters have been drawing significant attention specially for solving the problems with other multilevel inverters. However, with the increase of number of levels, the ANPC requires more electronic switches and flying capacitors, by which the complexity and the cost increases. In this paper, an ANPC inverter with a reduced number of switches and flying capacitors is presented for the grid integration of the solar PV systems controlled using the model predictive control technique. The proposed power converter effectively utilizes the dc bus voltage more when compared with the traditional ANPC converter. In the proposed inverter, a high frequency transformer is used to eliminate the voltage balancing problems faced by the traditional ANPC inverters. The proposed magnetic linked power converter provides the galvanic isolation, which is one of the most critical issues for traditional transformer-less grid connected PV systems. The proposed topology makes the control strategy simple and makes the power conversion system reliable for the photovoltaic power plants.
- 23 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (8) , 6828-6839
A New Modulation Technique to Improve the Power Loss Division Performance of the Multilevel Inverters
Multilevel inverters (MLIs) have offered significant contributions towards the implementation of energy conversion units used in industry and renewable energy applications. However, the switching devices in MLIs are associated with power loss division problems. The pulse width modulation (PWM) techniques greatly influence the peak, average, and ripple values of the device junction temperature. Thermal tension in the devices may be raised due to increased power loss caused by additional switching or uneven distribution of losses due to unbalanced gate pulses. Higher thermal stress accelerates the life degradation process of the power devices and eventually, leads to permanent damage of the MLI. Therefore, a new loss balancing two pole clamped PWM technique for single phase MLI is proposed in this paper. In the proposed PWM technique, in each half line cycle, symmetrical and equal duration of nonswitching zone is placed on the two reference signals alternately. Due to symmetrical and equal duration of clamping action, the unbalanced gate pulses become balanced after each half line cycle. The improved performance of the proposed technique is validated by simulation in MATLAB/Simulink and experimental results from downscale laboratory prototype test platform.
- 23 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (8) , 6828-6839
A New Modulation Technique to Improve the Power Loss Division Performance of the Multilevel Inverters
Multilevel inverters (MLIs) have offered significant contributions towards the implementation of energy conversion units used in industry and renewable energy applications. However, the switching devices in MLIs are associated with power loss division problems. The pulse width modulation (PWM) techniques greatly influence the peak, average, and ripple values of the device junction temperature. Thermal tension in the devices may be raised due to increased power loss caused by additional switching or uneven distribution of losses due to unbalanced gate pulses. Higher thermal stress accelerates the life degradation process of the power devices and eventually, leads to permanent damage of the MLI. Therefore, a new loss balancing two pole clamped PWM technique for single phase MLI is proposed in this paper. In the proposed PWM technique, in each half line cycle, symmetrical and equal duration of nonswitching zone is placed on the two reference signals alternately. Due to symmetrical and equal duration of clamping action, the unbalanced gate pulses become balanced after each half line cycle. The improved performance of the proposed technique is validated by simulation in MATLAB/Simulink and experimental results from downscale laboratory prototype test platform.
- 13 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (2) , 1990-2000
A Magnetic-Linked Multilevel Active Neutral Point Clamped Converter With an Advanced Switching Technique for Grid Integration of Solar Photovoltaic Systems
Nowadays, the grid connected solar photovoltaic (PV) system has been drawing significant attention due to the rapid development and the decreasing cost of the solar panels. The efficiency and the reliability of a grid connected PV system mainly depend on the power conversion system and the control strategy. This paper presents a new magnetic linked 7-level active neutral point clamped (ANPC) converter, which requires less number of flying capacitors and also reduces the control complexity of the grid connected PV system. The proposed converter topology utilizes the input dc bus voltage better than the traditional ANPC multilevel converter and also provides galvanic isolation to the grid connected PV systems. The lack of galvanic isolation is one of the biggest problems faced by the power frequency transformer-less grid connected PV systems. The proposed magnetic linked power converter is also validated through simulations in MATLAB/Simulink and through tests in a laboratory test platform.
- 13 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (2) , 1990-2000
A Magnetic-Linked Multilevel Active Neutral Point Clamped Converter With an Advanced Switching Technique for Grid Integration of Solar Photovoltaic Systems
Nowadays, the grid connected solar photovoltaic (PV) system has been drawing significant attention due to the rapid development and the decreasing cost of the solar panels. The efficiency and the reliability of a grid connected PV system mainly depend on the power conversion system and the control strategy. This paper presents a new magnetic linked 7-level active neutral point clamped (ANPC) converter, which requires less number of flying capacitors and also reduces the control complexity of the grid connected PV system. The proposed converter topology utilizes the input dc bus voltage better than the traditional ANPC multilevel converter and also provides galvanic isolation to the grid connected PV systems. The lack of galvanic isolation is one of the biggest problems faced by the power frequency transformer-less grid connected PV systems. The proposed magnetic linked power converter is also validated through simulations in MATLAB/Simulink and through tests in a laboratory test platform.
- 20 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (2) , 1-5
An Advance Modulation Technique for Single-Phase Voltage Source Inverter to Integrate SMES Into Low-Voltage Distribution
Nowadays, the grid-integrated superconducting magnetic energy storage (SMES) has received significant attention due to its short delay during charging and discharging processes for stable operation of microgrid. The energy conversion efficiency of the SMES mainly depends upon the switching algorithm of its power conditioning system. Traditional modulation techniques can cause considerable losses and poor conversion efficiency. In this paper, an advance pulsewidth modulation technique for an inverter to use with an SMES integrated with the single-phase low-voltage distribution grid is proposed, which provides a lower total harmonic distortion and reduces power conversion losses. The proposed technique improves the performance of the power conditioning system of SMES by reducing energy consumption from the SMES during short-circuit fault, voltage collapse, etc. The proposed algorithm is also verified in a laboratory test platform.
- 20 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (2) , 1-5
An Advance Modulation Technique for Single-Phase Voltage Source Inverter to Integrate SMES Into Low-Voltage Distribution
Nowadays, the grid-integrated superconducting magnetic energy storage (SMES) has received significant attention due to its short delay during charging and discharging processes for stable operation of microgrid. The energy conversion efficiency of the SMES mainly depends upon the switching algorithm of its power conditioning system. Traditional modulation techniques can cause considerable losses and poor conversion efficiency. In this paper, an advance pulsewidth modulation technique for an inverter to use with an SMES integrated with the single-phase low-voltage distribution grid is proposed, which provides a lower total harmonic distortion and reduces power conversion losses. The proposed technique improves the performance of the power conditioning system of SMES by reducing energy consumption from the SMES during short-circuit fault, voltage collapse, etc. The proposed algorithm is also verified in a laboratory test platform.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
A Novel Active Neutral Point Clamped Multilevel Converter with an Advanced Switching Technique for Grid Integration of Solar Photovoltaic Systems
The grid integration of solar photovoltaic (PV) systems has become a vital issue for power industry in the recent decades due to global warming and shortage of fossil fuel. The multilevel converter is one of the most promising converter topologies for grid integration of solar PV systems, because of its good features such as higher voltage handling capability and the capacity to generate high quality output power. Active neutral point clamp (ANPC) multilevel inverters are getting popularity for overcoming unequal loss distribution. However, ANPC inverters requires flying capacitors, which increases the system complexity and cost, and reduces the power conversion efficiency. In this paper, a reduced flying capacitor 7-level three-phase converter is proposed for a direct grid integration of the solar PV systems. Moreover, the proposed topology utilizes more dc-bus voltage than the conventional ANPC inverter. In addition, an advanced pulse width modulation technique is applied to the proposed topology to reduce the total harmonic distortion in the output voltage waveform as well as the converter losses. The practicality of the proposed converter topology is also verified with the simulation results from MATLAB/Simulink and the experimental results from a reduced-scale laboratory test platform.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
A Novel Active Neutral Point Clamped Multilevel Converter with an Advanced Switching Technique for Grid Integration of Solar Photovoltaic Systems
The grid integration of solar photovoltaic (PV) systems has become a vital issue for power industry in the recent decades due to global warming and shortage of fossil fuel. The multilevel converter is one of the most promising converter topologies for grid integration of solar PV systems, because of its good features such as higher voltage handling capability and the capacity to generate high quality output power. Active neutral point clamp (ANPC) multilevel inverters are getting popularity for overcoming unequal loss distribution. However, ANPC inverters requires flying capacitors, which increases the system complexity and cost, and reduces the power conversion efficiency. In this paper, a reduced flying capacitor 7-level three-phase converter is proposed for a direct grid integration of the solar PV systems. Moreover, the proposed topology utilizes more dc-bus voltage than the conventional ANPC inverter. In addition, an advanced pulse width modulation technique is applied to the proposed topology to reduce the total harmonic distortion in the output voltage waveform as well as the converter losses. The practicality of the proposed converter topology is also verified with the simulation results from MATLAB/Simulink and the experimental results from a reduced-scale laboratory test platform.