JCJamie J. Crispin

Jamie J. Crispin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jamie J. Crispin has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Horizontal Soil Reaction of a Pile Segment in Cohesive Soil with Interface Slip

    by Abigail H. Bateman, Jamie J. Crispin, George Mylonakis

    Under lateral loading, relative slip between a pile and the surrounding soil can occur at displacements as small as 10 − 4 pile diameters. Conventional p – y formulations, widely used in the analysis of slender laterally loaded piles, assume perfect bonding between pile and soil and do not explicitly account for the progressive interface slip, which can yield unconservative overpredictions of the overall pile stiffness. This note presents a novel semianalytical theoretical solution to predict the degradation of the elastic p – y stiffness due to the progressive slip at a cohesive pile-soil interface. The solution is developed in two dimensions by expanding the stress and displacement fields around the pile in Fourier series in the angular direction, and employing discretization at the pile-soil interface and outer boundary to satisfy boundary conditions. The formulation provides a computationally efficient alternative to finite-element and finite-difference analyses, against which it is validated, while preserving physical transparency and simple calibration. The resultant solution allows progressive interface behavior to be incorporated in a p – y analysis, providing a more realistic representation of lateral pile response under serviceability limit states.

  • Open Access

    Monotonic and cyclic lateral loading of piles in low- to medium-density chalk

    by R. A. McAdam, R. M. Buckley, F. Schranz, B. W. Byrne, R. J. Jardine, S. Kontoe, T. Liu, K. Vinck, J. J. Crispin

    Offshore and other structures often rely on driven piles to carry lateral loads. However, there is currently no established design method to cover lateral loading at chalk sites, which are widespread across Northwest Europe. This paper reports monotonic and cyclic lateral load tests on highly instrumented 508 mm and 1220 mm diameter. open steel piles driven at a well-characterised chalk test site in Kent, UK, for a recent joint industry project that developed new benchmark datasets and analyses, supported by high-quality testing. The ultimate lateral pressures mobilised in the chalk are shown to be relatively low compared to its uniaxial compressive strengths (UCS) due to pile-driving damage, natural fracturing, local yielding and brittleness. Significant gaps opened between the piles and chalk during loading, that led to a substantially softer response on unloading and subsequent reloading, as well as marked axial capacity losses. Reaction curves extracted from the field measurements and applied in a one-dimensional numerical model perform well in reproducing the monotonic lateral tests. As with piles driven in other materials, one-way cyclic lateral loading led to permanent displacement accumulation and stiffness changes that were linked to the cyclic loading parameters. Both effects were more marked under biaxial cyclic lateral loading.


  • Open Access

    MSD applied to the construction of the British Library basement: a multi-stage excavation in London Clay

    by Jamie J. Crispin, Abigail H. Bateman, Elia Voyagaki, Alexandra Campbell, George Mylonakis, Malcolm D. Bolton, Paul J. Vardanega

    This note presents the application of the mobilisable strength design (MSD) method to the monitoring results of the multi-propped excavation in the south area of the British Library Euston, constructed in a highly overconsolidated stiff clay deposit. The MSD method is an energy-based approach (a nonlinear finite-element method for a single-degree-of-freedom soil-wall system) introduced to develop a simplified design methodology that satisfies both ultimate and serviceability limit states. Wall displacement predictions based on the MSD method are compared with considerable field monitoring data. The sensitivity of the method to reasonable variations in input parameters is considered. A spreadsheet and python code demonstrating the MSD analysis from this paper are provided in the online supplement alongside details of the mathematical formulation.


  • Open Access

    Exact Winkler Solution for Laterally Loaded Piles in Inhomogeneous Soil

    by Jamie J. Crispin, George Mylonakis

    A novel exact analytical solution is derived for the equation y(4)+xny=0 in the region x≥0 , which is important for the analysis of piles in soil with stiffness varying with depth. To date, exact solutions for long piles are available only for the cases where n=−4 , 0, and 1. For other values of the exponent n , solutions have formerly been obtained numerically, mainly by the finite-difference method or approximate analytical solutions. An inherent difficulty in obtaining solutions for long beams (which are used to model flexible piles) lies in the inability to isolate the regular, converging part of the solution over the singular part that diverges with increasing x . In this paper, an exact solution is derived for n>−4 , focusing on the important case of semi-infinite beams. Key aspects of the problem such as the stiffness and flexibility matrices at the pile head, and the peak bending moments due to eccentrically acting lateral loads, are discussed. A novel approach for deriving Winkler spring moduli for combined force and moment loading is proposed and shown to provide good agreement with rigorous numerical continuum results.


  • Open Access

    Theoretical t-z Curves for Axially Loaded Piles

    by Abigail H. Bateman, Jamie J. Crispin, Paul J. Vardanega, George E. Mylonakis

    Estimation of nonlinear pile settlement can be simplified using one-dimensional “t-z ” curves that conveniently divide the soil into multiple horizontal “slices.” This simplification reduces the continuum analysis to a two-point boundary-value problem of the Winkler type, which can be tackled by standard numerical procedures. Theoretical “t-z ” curves can be established using the “shearing-of-concentric-cylinders” theory of Cooke and Randolph-Wroth, which involves two main elements: (1) a constitutive model cast in flexibility form, γ=γ(τ) ; and (2) an attenuation function of shear stress with radial distance from the pile, τ=τ(r) . Soil settlement can then be determined by integrating shear strains over the radial coordinate, which often leads to closed-form solutions. Despite the simplicity and physical appeal of the method, only a few theoretical “t-z ” curves are available in the literature. This paper introduces three novel attenuation functions for shear stresses, inspired by continuum solutions, which are employed in conjunction with eight soil constitutive models leading to a set of 32 “t-z ” curves. Illustrative examples of pile settlement calculation in two soil types are presented to demonstrate application of the method.


  • Open Access

    The DINGO database of axial pile load tests for the UK: settlement prediction in fine-grained soils

    by Elia Voyagaki, Jamie J. Crispin, Charlotte E. L. Gilder, Konstantina Ntassiou, Nick O’rIordan, Paul Nowak, Tarek Sadek, Dinesh Patel, George Mylonakis, Paul J. Vardanega

    The availability of reliable field data is critical for the advancement of geotechnical engineering. This is particularly the case for piled foundations; due to the substantial geotechnical uncertainties. The settlement (performance) predictions from established analytical methods may deviate from field measurements by as much as an order of magnitude. This paper provides a statistical assessment of the uncertainty of predictions of pile performance under axial loading using an openly accessible geotechnical database of pile load tests from the United Kingdom. The collected database information was classified by pile type, location, test data quality and availability of geotechnical data. With reference to the data from fine-grained soils, two analytical models were employed to predict foundation settlement. The settlement prediction performance was then studied statistically and the model bias and error compared with reference to the aforementioned categories to identify the impact of different sources of uncertainty and evaluate the use of both models for future geotechnical practice. The two models investigated generally over-predict settlement, which is likely due to conservative selection of key model parameters, such as soil strength.


  • Open Access

    Simplified models for axial static and dynamic analysis of pile foundations

    by Jamie J. Crispin, George E. Mylonakis

    In this chapter, simplified methods for static and dynamic analysis of pile foundations under axial loads are discussed. Firstly, a number of analytical solutions for Winkler springs and dashpots are briefly reviewed. Secondly, exact and approximate solutions for stiffness of single piles are derived for both homogeneous and inhomogeneous soil profiles using the Winkler model. The approximate solutions are based on energy principles obtained my means of shape functions analogous to those used in finite-element formulations. Thirdly, solutions for grouped piles are derived using the superposition approach of Poulos and Davis. To this end, a family of interaction factors accounting for pile-soil-pile interaction is reviewed. It is shown that soil inhomogeneity and pile-to-pile interaction may have a profound impact on pile head stiffness and ensuing settlement. Results are presented in the form of dimensionless graphs and charts that elucidate critical aspects of the problem, and detailed comparisons with more rigorous numerical continuum solutions are provided. Application examples are presented and discussed.


  • Winkler model for axial deformation of compressible piles due to tunnelling

    by J.J. Crispin

    Predicting the influence of tunnelling induced displacements on nearby structures is essential for urban tunnelling projects. However, piled foundations have a reinforcing effect on the soil, influencing the settlement of the associated structure as well as surrounding structures. This means that traditional greenfield settlement prediction methods are not accurate and instead numerical analysis is required to predict ground movements. A simplified, two-stage analysis can be completed by first predicting the greenfield ground movements down the length of the pile and applying these displacements to the end of Winkler springs representing the interface between the pile and the soil. A simple solution is presented for compressible piles in homogeneous soil and layered soil. Extension of the solution to inhomogeneous soil layers and to pile groups is discussed.