Sam Ahmadzadeh

This work details the triboelectric characteristics of diamond‐like carbon (DLC) film where a proportioned sp³:sp² bond ratio is engineered through a patented pulsed DC magnetron sputtering process to achieve a durable commercial energy harvesting material. A triboelectric nanogenerator (TENG) is fabricated by creating the triboelectric interface between DLC and PTFE. The presence and synchronization of σ – σ and σ – π bonds between DLC‐PFTE contact surface amplify the electronic cloud overlap between their atoms leading to an enhancement of the triboelectric surface charge density. The inherent hardness and reduced friction achieved through DLC and PTFE respectively prevent the mass transfer, and consequent power loss upon consecutive mechanical contact and achieves a stable electric power output of 141 mW m⁻². The DLC durability achieved with PTFE in TENG demonstrates its significant potential as low frequency (1 – 10 Hz) energy harvesting devices and self‐/low‐power electronic devices and sensors. The paper uniquely contributes to a better understanding of the triboelectrification mechanism by insightfully detailing the band‐to‐band transition of electrons between the PTFE and DLC tribo‐interface, as well as discussing gap and frequency limitation of the tribo‐pair on the triboelectric charge yield, storage, transfer, and on the friction layer electric field.

Based on pulsed DC sputter deposition of hydrogenated carbon, an absorber optical coating with maximized broadband infrared absorptance is reported. Enhanced broadband (2.5–20 µm) infrared absorptance ( > 90 % ) with reduced infrared reflection is achieved by combining a low-absorptance antireflective (hydrogenated carbon) overcoat with a broadband-absorptance carbon underlayer (nonhydrogenated). The infrared optical absorptance of sputter deposited carbon with incorporated hydrogen is reduced. As such, hydrogen flow optimization to minimize reflection loss, maximize broadband absorptance, and achieve stress balance is described. Application to complementary metal-oxide-semiconductor (CMOS) produced microelectromechanical systems (MEMS) thermopile device wafers is described. A 220% increase in thermopile output voltage is demonstrated, in agreement with modeled prediction.

Concept, design and practical implementation of a miniaturized spectrophotometer, utilized as a mid-infrared-based multi gas sensor is described. The sensor covers an infrared absorption wavelength range of 2.9 to 4.8 um, providing detection capabilities for carbon dioxide, carbon monoxide, nitrous oxide, sulphur dioxide, ammonia and methane. A lead selenide photo-detector array and customized MEMS-based micro-hotplate are used as the detector and broadband infrared source, respectively. The spectrophotometer optics are based on an injection moulded Schwarzschild configuration incorporating optical pass band filters for the spectral discrimination. This work explores the effects of using both fixed-line pass band and linear variable optical filters. We report the effectiveness of this low-power-consumption miniaturized spectrophotometer as a stand-alone single and multi-gas sensor, usage of a distinct reference channel during gas measurements, development of ideal optical filters and spectral control of the source and detector. Results also demonstrate the use of short-time pulsed inputs as an effective and efficient way of operating the sensor in a low-power-consumption mode. We describe performance of the spectrometer as a multi-gas sensor, optimizing individual component performances, power consumption, temperature sensitivity and gas properties using modelling and customized experimental procedures.

Optical properties of low-temperature pulsed DC-sputter deposited ( ≤ 70 ° C ) hydrogenated carbon are presented. Increasing hydrogen incorporation into the sputter deposited carbon significantly decreases infrared optical absorption due to a decrease in deep absorptive states associated with dangling bonds. Hydrogen flow is optimized (hydrogen flow 3 sccm), achieving the best compromise between increased infrared transmittance and hardness for durable coating performance. Optical, environmental, and durability performance of pulsed DC-sputtered carbon incorporated in multilayer (a-C:H/Ge) infrared antireflective coatings indicates suitability as a durable infrared optical coating for commonly used infrared substrates, including temperature sensitive chalcogenide glass.

The authors wish to modify the funding section as follows to this paper

Optical, mechanical, stress and environmental properties of room temperature pulsed DC sputter deposited hydrogenated carbon are presented. Results show optical, environmental and durability performance suitable for use as an external surface durable infrared optical coating.

In this work, performance improvements are described for a low-power consumption non-dispersive infrared (NDIR) methane (CH₄) gas sensor using customised optical thin film bandpass filters (BPFs) centered at 3300 nm. BPFs shape the spectral characteristics of the combined mid-infrared III–V based light emitting diode (LED)/photodiode (PD) light source/detector optopair, enhancing the NDIR CH₄ sensor performance. The BPFs, deposited using a novel microwave plasma-assisted pulsed DC sputter deposition process, provide room temperature deposition directly onto the temperature-sensitive PD heterostructure. BPFs comprise germanium (Ge) and niobium pentoxide (Nb₂O₅) alternating high and low refractive index layers, respectively. Two different optical filter designs are progressed with BPF bandwidths (BWs) of 160 and 300 nm. A comparison of the modelled and measured NDIR sensor performance is described, highlighting the maximised signal-to-noise ratio (SNR) and the minimised cross-talk performance benefits. The BPF spectral stability for various environmental temperature and humidity conditions is demonstrated.