SLSergei Lebedev

Sergei Lebedev

*This is an algorithmically generated author record based on publicly available information.

Sergei Lebedev has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • METHODOLOGY OF FORMING TRACTOR PERFORMANCE IN VARIABLE STATE PARAMETERS

    by L. Pogorilyy UkrNDIPVT, A. Lebedev, S. Lebedev, A. Korobko, V. Voinovskyi

    The purpose of this study is to develop a methodology for assessing tractor performance under variable state parameters. Research methods. The methodological basis of the study is the generalization and analysis of existing scientifi c results regarding tractor performance under specifi c operating conditions. To form a scientifi c problem, determine the goal and set the research objectives, the analytical method and comparative analysis were used. When creating empirical models, the basic provisions of the performance of technical systems in variable state parameters were used. Research results. Considering that the performance of a tractor is assessed by a set of qualitative and quantitative characteristics of its properties, the study was carried out as a multidimensional technical system in state space. In this case, the tractor is considered as a system with a delay, for which the condition of stability of its functioning is justifi ed while ensuring the standards of operational manufacturability. Conclusion. The tractor will be operational if its technical condition ensures its stable movement within the limits stipulated by the regulatory and technical documentation. An integral part of the tractor's operational capability is its operational manufacturability, which is determined by the organization and quality of maintenance and repair. The need to introduce a separate regulatory act in Ukraine that would regulate the requirements and procedures for assessing compliance with the standards of used tractors purchased on the secondary market is justifi ed. The study substantiated the feasibility of using dynamic models to predict the tractor's condition and correct operating modes. The developed methodology for diagnostics and performance assessment includes both technical and contextual parameters. The implementation of the proposed methodology allows for prompt response to changes in the tractor's condition, optimization of technological processes, and ensuring the economic effi ciency of agricultural production. Based on the results of research and the experience of other countries, the need to introduce a separate regulatory legal act in Ukraine that would regulate the requirements and procedures for assessing conformity for single tractor samples, used, as well as self-assembled ones purchased on the secondary market, is justifi ed, since the procedures and requirements of the Technical Regulation on Type Approval (CMU Resolution No. 1367 of 28.12.2011) cannot be fully applied to such tractors.

  • Solving Problems of Dynamics of Systems with Elastic Elements and Variable Masses

    by Yevhen Kalinin, Yevhen Medvediev, Sergiy Lebedev, Heorhii Kuchuk, Nina Kuchuk


  • Open Access

    Determining conditions for providing maximum traction efficiency of tractor as part of a soil tillage unit

    by Anatoliy Lebedev, Mykhailo Shuliak, Sergei Lebedev, Stanislav Khalin, Tetiana Haidai, Anton Kholodov, Viacheslav Pirogov, Vitalii Shaposhnyk

    This study aims to investigate the operation of a tractor as part of the tillage unit on the basis of analysis of its interaction with the supporting surface and the correlation between the mass of the tractor and tool. The classic approach to determining the efficiency factor does not take into account the extensive system of power take-off shafts and the extent of their use in combined tillage units. To solve the related problem, a mathematical apparatus was built in the study, which makes it possible to determine the rational ratio between the traction force of a tractor and the mass of the tillage unit. Underlying the methodological basis of the work is the generalization and analysis of the study of traction indicators of the tractor as part of the tillage unit. Empirical models of unit operation were constructed by employing the basic principles of the system approach and analysis of technical systems. When improving the methodology of research using the method of partial accelerations and our devised procedures, it was possible to significantly reduce the time without compromising the quality of results. The maximum traction efficiency for John Deere 8R series tractors as part of the tillage unit was determined, ηTmax=0.719, as well as the conditions for its provision. The traction efficiency for tractors with wheel formula 4K2, mass Gim=6–10 t, with power consumption from 60 % to 80 % was determined; it is 0.58–0.64. The results of the study make it possible to obtain a new solution to the scientific problem of ensuring the maximum traction efficiency of the tractor as part of the tillage unit, based on the rational ratio between the traction force of the tractor and the weight of the machine-tractor unit. The proposed system approach could be used to justify the layout of units and recommendations regarding their modes of operation in the case of instability of operating mass and traction force


  • Open Access

    ENERGY AND TECHNOLOGICAL ADAPTATION OF GENERAL PURPOSE TRACTORS

    by Anatoliy Lebedev, Sergei Lebedev, Andrii Korobko, Mykhailo Shuliak, Maksym Murchych, Oleksii Pirogov

    В статті викладені проблеми енерготехнологічної адаптації тракторів загального призначення. Визначено, що енерготехнологічна адаптація тракторів загального призначення оцінюється за ступенем зниження його енерговитрат в агротехнологіях при реалізації біопотенціалу сільгоспкультур. Обґрунтовані тягово-енергетичні режими роботи трактора для основних груп ґрунтообробки при нестабільному тяговому навантаженні. Доказано, що реалізація тягово-енергетичних показників трактора ефективно при оцінці їх взаємозв’язку з біопотенціалом оброблюваних сільгоспкультур. Теоретично обґрунтовані і практично реалізована методика забезпечення відповідності енерговитрат тракторного агрегату і втрат енергії врожаю оброблюваних сільгоспкультур. Запропонована методика оцінки біопотенціалу сортових можливостей основних сільгоспкультур, що базується на оптимізації технологічного процесу , а також добрив з врахуванням метеорологічних факторів і природного потенціалу ґрунту. Виконана експлуатаційно-технологічна оцінка енерготехнологічної адаптації тракторів загального призначення при збиранні кукурудзи на зерно і ярової пшениці.

  • Open Access

    ASSESSMENT OF THE STABILITY OF MOTION OF A WHEEL SEMI-TRACK UNIT

    by Evgeny Kalinin, Sergii Lebedev, Andrii Kozhushko, Ivan Koliesnik

    The paper analyzes the influence of the geometric parameters of the semi-trailer unit on the stability of its movement. A mathematical model of the dynamics of the cultivator unit under the influence of disturbing forces is developed. The analysis of research results shows that in the process of movement, the wheeled semi-trailer unit is subjected to transverse forces, which arise as a result of the unevenness of the traction resistance of the side and rear beams. The main vector and the main moment cause the unit to deviate from the rectilinear movement. The differential equations obtained in the work make it possible to determine the values of the lead angles, their components, and the speed at which the lead of the unit will be the smallest. Based on the dependence of the angle of departure of the unit on the disturbing forces and speed of movement, the optimal location of the side bars of the semi-trailer unit on the tractor frame was found.


  • DYNAMIC ADAPTATION OF TRACTOR CONTROL SYSTEMS IN CHANGING CONDITIONS

    by Sumy National Agrarian University, A. Lebedev, S. Lebedev

    Research objective. Increasing the safety of tractor use by improving their controllability by substantiating the methodology for assessing tractor controllability in the state space. Research methods. The research methodology is the method of partial accelerations, which is based on the dependence of the tractor’s acceleration on the traction load. The research methodology is based on adaptive dynamic stabilization of ensuring the stability and controllability of the tractor during movement using a measuring and recording complex for monitoring the accelerations of the tractor unit, developed with the participation of the authors of this article. Results. The possibility of assessing the state of the tractor control system with minimal information about its behavior and the validity of the stability and controllability zone of the tractor unit has been proven. When assessing the dynamics of the tractor control system, it is effective to use the method of alternating states, according to which the tractor unit is considered as a multidimensional dynamic system. With semi-automatic control of foreign tractors with long-term adjustment of the control system, the condition of stability of the tractor unit operation is maintained throughout the entire range of changes in its dynamic parameters. Conclusion. When assessing the dynamic adaptation of the tractor control system, it is effective to use the method of alternating states, according to which the tractor unit is considered as a multidimensional dynamic system with controlled and uncontrolled input variables; the zone of stability and controllability of the tractor unit from disturbing forces and resistance forces is theoretically substantiated and experimentally confirmed. The effectiveness of the experimental study on assessing the controllability and stability of the movement of the tillage unit using the measuring and recording complex developed with the participation of the authors of this article is proven. Semi-automatic control of the tractor unit has not received proper coverage in the technical literature, which can be explained mainly by the possibility of driver actions only on foreign-made tractors. Key words: tractor, alternating states, control system, dynamic adaptation, partial acceleration.


  • METHODOLOGY FOR ASSESSING TRACTOR TRACTION PROPERTIES UNDER UNSTABLE COUPLING WEIGHT

    by Kharkiv branch of L. Pogorilyy UkrNDIPVT, A. Lebedev, S. Lebedev, A. Korobko

    Purpose of the study. The purpose of the study is to increase the efficiency of using the tractor hitch weight in traction mode by reducing the uneven distribution of vertical reactions between the wheels. Research methods. The methodological basis of the work is the generalization and analysis of known scientific results regarding the theory of the tractor in traction mode. Analytical method and comparative analysis were used to form a scientific problem, determine the goal and set research objectives. When creating empirical models of the tractor, the main provisions of the theory of probabilities were used. The results of the study. The main provisions of the methodology for evaluating the traction properties of the tractor with the instability of the coupling weight have been formulated. The method of evaluating the vertical reactions on the wheels of the tractor is substantiated, which is based on the measurement of the vertical reaction on one of the four wheels. It has been proven that tractors with lubrication to the front or rear axles of the center of mass have the greatest probability of equal distribution of vertical reactions between the wheels of the same axle, while tractors with the center of mass in the middle between the axles have the lowest probability. It is theoretically substantiated and experimentally confirmed that when the tractor performs plowing work with uneven distribution of loads on the sides, its operation with maximum traction efficiency is ensured by blocking the front and rear axle drivers. Conclusion. A well-founded methodology for evaluating the influence of the position of the tractor’s center of mass on its traction properties. The issue of evaluating the influence of the tractor’s center of mass on its traction properties when aggregated with mounted, trailed and combined agricultural machines remains open. Key words: tractor, traction properties, coupling weight, center of mass, vertical reactions, driving bridges, blocking.