Minsik Kong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Minsik Kong has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Unyong Jeong
Department of Materials Science and Engineering Pohang University of Science and Technology (POSTECH) Pohang Republic of Korea
8 shared publications - Insang You
University of Waterloo
3 shared publications - Soojin Park
Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea
3 shared publications - Anupam Giri
Department of Materials Science and Engineering, Pohang University of Science and Technology, 77 Cheongam-Ro, Nam-Gu, Pohang 790-784, Korea
2 shared publications Gilwoon Lee
Department of Materials Science and Engineering Pohang University of Science and Technology (POSTECH) 77 Cheongam Pohang 37673 Republic of Korea
2 shared publicationsGyeongbae Park
Department of Materials Science and Engineering Pohang University of Science and Technology (POSTECH) 77 Cheongam Pohang 37673 Republic of Korea
2 shared publications
Latest Publications
- Open Access
- 28 November 2025
- Published by Wiley in Advanced Science
- Vol. 13 (8) , e17427
A Facile Route to Large‐Area 2D Pt
Platinum (Pt) is a popular hydrogen‐evolution reaction (HER) catalyst, yet its high‐cost limits industrial deployment. This is addressed by incorporating an oxygen‐deficient, gallium (Ga)‐rich gallium oxide (GaO x ) adhesion layer that reverses the dewetting thermodynamics, yielding continuous 2D Pt at sub‐nanometer thickness by simple direct current (DC) sputtering. Alloy anchoring and vacancy chemisorption produce mechanically robust, transparent, conductive films with high thermal stability. During HER, 2D Pt/GaO x reduces, forming a Ga‐Pt that further smoothens. The 1 nm film matches bulk Pt electrocatalytic activity while sustaining 1A cm −2 for 100 h without decay. Revealing the wetting mechanism including the effect of adhesion layer, and the depositing metals, the strategy generalizes to other noble metals with adhesion layers, offering a scalable route to ultrathin catalytic and electronic platforms.
- 28 November 2025
- Published by Wiley in Advanced Science
- Vol. 13 (8) , e17427
Open AccessA Facile Route to Large‐Area 2D Pt
Platinum (Pt) is a popular hydrogen‐evolution reaction (HER) catalyst, yet its high‐cost limits industrial deployment. This is addressed by incorporating an oxygen‐deficient, gallium (Ga)‐rich gallium oxide (GaO x ) adhesion layer that reverses the dewetting thermodynamics, yielding continuous 2D Pt at sub‐nanometer thickness by simple direct current (DC) sputtering. Alloy anchoring and vacancy chemisorption produce mechanically robust, transparent, conductive films with high thermal stability. During HER, 2D Pt/GaO x reduces, forming a Ga‐Pt that further smoothens. The 1 nm film matches bulk Pt electrocatalytic activity while sustaining 1A cm −2 for 100 h without decay. Revealing the wetting mechanism including the effect of adhesion layer, and the depositing metals, the strategy generalizes to other noble metals with adhesion layers, offering a scalable route to ultrathin catalytic and electronic platforms.
- 16 August 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 385 (6710) , 731-737
Ambient printing of native oxides for ultrathin transparent flexible circuit boards
Metal oxide films are essential in most electronic devices, yet they are typically deposited at elevated temperatures by using slow, vacuum-based processes. We printed native oxide films over large areas at ambient conditions by moving a molten metal meniscus across a target substrate. The oxide gently separates from the metal through fluid instabilities that occur in the meniscus, leading to uniform films free of liquid residue. The printed oxide has a metallic interlayer that renders the films highly conductive. The metallic character of the printed films promotes wetting of trace amounts of evaporated gold that would otherwise form disconnected islands on conventional oxide surfaces. The resulting ultrathin (<10 nanometers) conductors can be patterned into flexible circuits that are transparent, mechanically robust, and electrically stable, even at elevated temperatures.
- 16 August 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 385 (6710) , 731-737
Ambient printing of native oxides for ultrathin transparent flexible circuit boards
Metal oxide films are essential in most electronic devices, yet they are typically deposited at elevated temperatures by using slow, vacuum-based processes. We printed native oxide films over large areas at ambient conditions by moving a molten metal meniscus across a target substrate. The oxide gently separates from the metal through fluid instabilities that occur in the meniscus, leading to uniform films free of liquid residue. The printed oxide has a metallic interlayer that renders the films highly conductive. The metallic character of the printed films promotes wetting of trace amounts of evaporated gold that would otherwise form disconnected islands on conventional oxide surfaces. The resulting ultrathin (<10 nanometers) conductors can be patterned into flexible circuits that are transparent, mechanically robust, and electrically stable, even at elevated temperatures.
- 5 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 160-163
Stretchable AMOLED Display Pixel Circuit Compensating for $\mathbf{V}_{\mathbf{th}}$ Variation and Strain EffectThis paper suggests a novel pixel circuit which can cope with the image quality issues in the stretchable active-matrix organic light-emitting diode (AMOLED) display. The proposed pixel circuit can compensate for the threshold voltage variation and the luminance reduction due to the deformation of the display panel. The simulated results demonstrate that the proposed pixel circuit can reduce the luminance reduction from 83 cd/m2 to 16 cd/m 2 .
- 5 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 160-163
Stretchable AMOLED Display Pixel Circuit Compensating for $\mathbf{V}_{\mathbf{th}}$ Variation and Strain EffectThis paper suggests a novel pixel circuit which can cope with the image quality issues in the stretchable active-matrix organic light-emitting diode (AMOLED) display. The proposed pixel circuit can compensate for the threshold voltage variation and the luminance reduction due to the deformation of the display panel. The simulated results demonstrate that the proposed pixel circuit can reduce the luminance reduction from 83 cd/m2 to 16 cd/m 2 .
- Open Access
- 6 August 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (32)
Stretchable anisotropic conductive film (S-ACF) for electrical interfacing in high-resolution stretchable circuits
Microparticle aligned-stretchable anisotropic conductive film enables high-resolution stretchable circuit lines to interconnect.
- 6 August 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (32)
Open AccessStretchable anisotropic conductive film (S-ACF) for electrical interfacing in high-resolution stretchable circuits
Microparticle aligned-stretchable anisotropic conductive film enables high-resolution stretchable circuit lines to interconnect.
- 21 June 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (31) , 2100299
Transparent Omni‐Directional Stretchable Circuit Lines Made by a Junction‐Free Grid of Expandable Au Lines
Although various stretchable optoelectronic devices have been reported, omni‐directionally stretchable transparent circuit lines have been a great challenge. Cracks are engineered and fabricated to be highly conductive patterned metal circuit lines in which gold (Au) grids are embedded. Au is deposited selectively in the cracks to form a grid without any junction between the grid lines. Since each grid line is expandable under stretching, the circuit lines are stretchable in all the directions. This study shows that a thin coating of aluminum on the oxide surface enables precise control of the cracks (crack density, crack depth) in the oxide layer. High optical transparency and high stretchability can be achieved simultaneously by controlling the grid density in the circuit line. Light‐emitting diodes are integrated directly on the circuit lines and stable operation is demonstrated under 100% stretching.
- 21 June 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (31) , 2100299
Transparent Omni‐Directional Stretchable Circuit Lines Made by a Junction‐Free Grid of Expandable Au Lines
Although various stretchable optoelectronic devices have been reported, omni‐directionally stretchable transparent circuit lines have been a great challenge. Cracks are engineered and fabricated to be highly conductive patterned metal circuit lines in which gold (Au) grids are embedded. Au is deposited selectively in the cracks to form a grid without any junction between the grid lines. Since each grid line is expandable under stretching, the circuit lines are stretchable in all the directions. This study shows that a thin coating of aluminum on the oxide surface enables precise control of the cracks (crack density, crack depth) in the oxide layer. High optical transparency and high stretchability can be achieved simultaneously by controlling the grid density in the circuit line. Light‐emitting diodes are integrated directly on the circuit lines and stable operation is demonstrated under 100% stretching.
- 4 June 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (23) , 26870-26878
Electroactive 1T-MoS2 Fluoroelastomer Ink for Intrinsically Stretchable Solid-State In-Plane Supercapacitors
Full advantage of stretchable electronic devices can be taken when utilizing an intrinsically stretchable power source. High-performance stretchable supercapacitors with a simple structure and solid-state operation are good power sources for stretchable electronics. This study suggests a new type of intrinsically stretchable, printable, electroactive ink consisting of 1T-MoS2 and a fluoroelastomer (FE). The active material (1T-MoS2/FE) is made by fluorinating the metallic-phase MoS2 (1T-MoS2) nanosheets with the FE under high-power ultrasonication. The MoS2 in the 1T-MoS2/FE has unconventional crystal structures in which the stable cubic (1T) and distorted 2H structures were mixed. The printed line of the 1T-MoS2/FE on the porous stretchable Au collector electrodes is intrinsically stretchable at more than ε = 50% and has good specific capacitance (28 mF cm–2 at 0.2 mA cm–2) and energy density (3.15 mWh cm–3). The in-plane all-solid-state stretchable supercapacitor is stretchable at ε = 40% and retains its relative capacity (C/Co) by 80%. This printable device platform potentially opens up the in-plane fabrication of stretchable micro-supercapacitor devices for wearable electronic applications.
- 4 June 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (23) , 26870-26878
Electroactive 1T-MoS2 Fluoroelastomer Ink for Intrinsically Stretchable Solid-State In-Plane Supercapacitors
Full advantage of stretchable electronic devices can be taken when utilizing an intrinsically stretchable power source. High-performance stretchable supercapacitors with a simple structure and solid-state operation are good power sources for stretchable electronics. This study suggests a new type of intrinsically stretchable, printable, electroactive ink consisting of 1T-MoS2 and a fluoroelastomer (FE). The active material (1T-MoS2/FE) is made by fluorinating the metallic-phase MoS2 (1T-MoS2) nanosheets with the FE under high-power ultrasonication. The MoS2 in the 1T-MoS2/FE has unconventional crystal structures in which the stable cubic (1T) and distorted 2H structures were mixed. The printed line of the 1T-MoS2/FE on the porous stretchable Au collector electrodes is intrinsically stretchable at more than ε = 50% and has good specific capacitance (28 mF cm–2 at 0.2 mA cm–2) and energy density (3.15 mWh cm–3). The in-plane all-solid-state stretchable supercapacitor is stretchable at ε = 40% and retains its relative capacity (C/Co) by 80%. This printable device platform potentially opens up the in-plane fabrication of stretchable micro-supercapacitor devices for wearable electronic applications.
- 13 September 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (50)
Stand‐Alone Intrinsically Stretchable Electronic Device Platform Powered by Stretchable Rechargeable Battery
Stretchable electronics have been considered a key technology in wearable and implantable medical devices. Although substantial advances have been made in key stretchable components, a stretchable electronic platform that integrates a stretchable power source and a stretchable printed circuit board (SPCB) has been a great challenge. Here, an intrinsically stretchable electronic device platform powered by a stretchable film battery is proposed so that the platform can be used as a stand‐alone. The stretchable battery is used as a substrate for manufacturing device platforms where SPCB is printed and directly connected through via holes, thereby enabling an increase in integrated devices density. To achieve an intrinsically stretchable battery and high‐performance circuit board, a novel concept of stretchable, self‐healable, and pressure‐sensitive polymer composite is designed. The platform is water‐proof and maintains its stable electrical performance under extreme physical deformations. As a proof of concept, the integration of light‐emitting diodes on the platform that can operate at large biaxial strain (125%) underwater is demonstrated.
- 13 September 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (50)
Stand‐Alone Intrinsically Stretchable Electronic Device Platform Powered by Stretchable Rechargeable Battery
Stretchable electronics have been considered a key technology in wearable and implantable medical devices. Although substantial advances have been made in key stretchable components, a stretchable electronic platform that integrates a stretchable power source and a stretchable printed circuit board (SPCB) has been a great challenge. Here, an intrinsically stretchable electronic device platform powered by a stretchable film battery is proposed so that the platform can be used as a stand‐alone. The stretchable battery is used as a substrate for manufacturing device platforms where SPCB is printed and directly connected through via holes, thereby enabling an increase in integrated devices density. To achieve an intrinsically stretchable battery and high‐performance circuit board, a novel concept of stretchable, self‐healable, and pressure‐sensitive polymer composite is designed. The platform is water‐proof and maintains its stable electrical performance under extreme physical deformations. As a proof of concept, the integration of light‐emitting diodes on the platform that can operate at large biaxial strain (125%) underwater is demonstrated.
- 1 July 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (29) , 26204-26212
Liquid Metal Covered with Thermoplastic Conductive Composites for High Electrical Stability and Negligible Electromechanical Coupling at Large Strains
Stretchable electrode is an essential part of soft electronic devices. Practical stretchable electrodes must meet the following requirements; metallic conductivity and no resistance change in various situations such as repeated large deformation, toxic environment, and large temperature change. This study suggests a simple electrode design that meets all the requirements simultaneously. The electrode consists of a liquid metal (LM) mesh pattern that is sandwiched between a thermoplastic block copolymer (BCP) film and a BCP/Ag flake composite film with a microfibril network structure on its surface. The electrode has a high conductivity (1.2 x 10^4 S/cm) and is stretchable up to 600% uniaxial strain (ε). Its resistance maintains unchanged during repeated stretching cycles at ε = 300% (ΔR < 0.04 Ω), and also under simultaneous situation of large deformation (ε = 400%) and large temperature change (20 ºC–70 ºC). The electrode is anti-corrosive in an acidic solution owing to the hydrophobic BCP layer that protects the LM from being etched. This study shows the connection of two separate electrodes and complete healing of scratched electrodes by finger pressing. In addition, it demonstrates the fabrication of superstretchable electroluminescence display as an example of potential uses of the electrode.
- 1 July 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (29) , 26204-26212
Liquid Metal Covered with Thermoplastic Conductive Composites for High Electrical Stability and Negligible Electromechanical Coupling at Large Strains
Stretchable electrode is an essential part of soft electronic devices. Practical stretchable electrodes must meet the following requirements; metallic conductivity and no resistance change in various situations such as repeated large deformation, toxic environment, and large temperature change. This study suggests a simple electrode design that meets all the requirements simultaneously. The electrode consists of a liquid metal (LM) mesh pattern that is sandwiched between a thermoplastic block copolymer (BCP) film and a BCP/Ag flake composite film with a microfibril network structure on its surface. The electrode has a high conductivity (1.2 x 10^4 S/cm) and is stretchable up to 600% uniaxial strain (ε). Its resistance maintains unchanged during repeated stretching cycles at ε = 300% (ΔR < 0.04 Ω), and also under simultaneous situation of large deformation (ε = 400%) and large temperature change (20 ºC–70 ºC). The electrode is anti-corrosive in an acidic solution owing to the hydrophobic BCP layer that protects the LM from being etched. This study shows the connection of two separate electrodes and complete healing of scratched electrodes by finger pressing. In addition, it demonstrates the fabrication of superstretchable electroluminescence display as an example of potential uses of the electrode.
- 31 May 2019
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 13 (6) , 7175-7184
Fabrication of Foldable Metal Interconnections by Hybridizing with Amorphous Carbon Ultrathin Anisotropic Conductive Film
With the advent of foldable electronics, it is necessary to develop a technology ensuring foldability when the circuit lines are placed on the top-most substrate rather than in the neutral plane used in the present industry. Considering the potential technological impacts, conversion of the conventional printed circuit boards to foldable ones is most desirable to achieve the top-most circuitry. This study realizes this unconventional conversion concept by coating an ultrathin anisotropic conductive film (UACF) on a printed metal circuit board. This study presents rapid large-area synthesis of hydrogenated amorphous carbon (a-C:H) thin films and their use as the UACF. Since the synthesized a-C:H thin film has electrical transparency, the metal/a-C:H hybrid board reflects the complexity of the underlying metal circuit board. The a-C:H thin film electrically connects the cracked area of the metal line, thus the hybrid circuit board is foldable without resistance change during repeated folding cycles. The metal/UACF hybrid circuit board can be applied to the fabrication of various foldable electronic devices.
- 31 May 2019
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 13 (6) , 7175-7184
Fabrication of Foldable Metal Interconnections by Hybridizing with Amorphous Carbon Ultrathin Anisotropic Conductive Film
With the advent of foldable electronics, it is necessary to develop a technology ensuring foldability when the circuit lines are placed on the top-most substrate rather than in the neutral plane used in the present industry. Considering the potential technological impacts, conversion of the conventional printed circuit boards to foldable ones is most desirable to achieve the top-most circuitry. This study realizes this unconventional conversion concept by coating an ultrathin anisotropic conductive film (UACF) on a printed metal circuit board. This study presents rapid large-area synthesis of hydrogenated amorphous carbon (a-C:H) thin films and their use as the UACF. Since the synthesized a-C:H thin film has electrical transparency, the metal/a-C:H hybrid board reflects the complexity of the underlying metal circuit board. The a-C:H thin film electrically connects the cracked area of the metal line, thus the hybrid circuit board is foldable without resistance change during repeated folding cycles. The metal/UACF hybrid circuit board can be applied to the fabrication of various foldable electronic devices.
- 26 December 2018
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 52 (1) , 63-72
Block Copolymer Elastomers for Stretchable Electronics
As industrial needs for healthcare sensors, electronic skin, and flexible/stretchable displays increase, interest in stretchable materials is increasing as well. In recent years, the studies on stretchable materials have spread to various pivot components, such as electrodes, circuits, substrates, semiconductors, dielectric layers, membranes, and active nanocomposite films. The block copolymer (BC) elastomers have been playing considerable role in the development of stretchable materials. Since BCs are soft elastomers based on physical cross-links, they show differences in physical properties from normal elastomers formed with chemical cross-linking. BC elastomers does not require additional chemical cross-linking procedure, so they can be easily processed after dissolved in various solvents. Their viscoelasticity and thermoplasticity enable the BCs to become moldable and sticky. Although their unique physical properties may serve as disadvantages in some cases, they have been actively applied to create various stretchable electronic materials and their uses are expected to be enlarged more than ever. In this Account, we summarize recent successful applications of BCs for the stretchable electronic devices and discuss the possibility of further uses and the challenges to be addressed for practical uses. Studies on BC-based stretchable materials have focused initially on the fabrication process of stretchable conductors; mixing conductive fillers physically with BCs, infiltrating BCs in a conductive filler layer, and converting metal precursors into metal nanoparticles inside BCs. When conductive fillers with high aspect ratios, such as nanowires or nanosheets are used, the fillers can be infiltrated by the BCs after deposited. Since the contacts between the fillers are maintained during the infiltration process, even thin composite films possess high conductivity and stretchability. The metal precursor solution printing is suggested as a promising approach because it is compatible with traditional printing techniques without clogging the nozzles and allows high filler loading efficiency. When using a BC as a substrate, it is advisable to use a BC/PDMS double layer because of viscoelastic and thermoplastic properties of BCs. If BC/PDMS double layer is used with much thicker PDMS layer instead of viscoelastic BC alone, the double layer substrate can show a perfect elastomeric behavior, and the advantages of the BC substrate are preserved. Additionally, the use of conventional manufacturing techniques is important for commercialization of the stretchable devices. BC substrates having preformed microfibril network on their surfaces facilitate the fabrication of high-resolution circuitry by directly depositing metals through a mask on the substrate. Recent successes of fabricating stretchable organic transistors were obtained based on in situ phase separation of polymer semiconductors to form nanofibril bundles on the surface of a BC substrate. They have led to the achievement of high resolution transistor array printed in large area. BCs are expected to expand their applicability, including stretchable batteries, since they make it feasible to fabricate various hybrid nanocomposites, pore size-controlled membranes, and microstructured surfaces. However, it is necessary to secure long-term stability under heat, solvent, and UV; in addition, there is a need for the synthesis of functional BCs for use in stretchable implanted biomedical devices.
- 26 December 2018
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 52 (1) , 63-72
Block Copolymer Elastomers for Stretchable Electronics
As industrial needs for healthcare sensors, electronic skin, and flexible/stretchable displays increase, interest in stretchable materials is increasing as well. In recent years, the studies on stretchable materials have spread to various pivot components, such as electrodes, circuits, substrates, semiconductors, dielectric layers, membranes, and active nanocomposite films. The block copolymer (BC) elastomers have been playing considerable role in the development of stretchable materials. Since BCs are soft elastomers based on physical cross-links, they show differences in physical properties from normal elastomers formed with chemical cross-linking. BC elastomers does not require additional chemical cross-linking procedure, so they can be easily processed after dissolved in various solvents. Their viscoelasticity and thermoplasticity enable the BCs to become moldable and sticky. Although their unique physical properties may serve as disadvantages in some cases, they have been actively applied to create various stretchable electronic materials and their uses are expected to be enlarged more than ever. In this Account, we summarize recent successful applications of BCs for the stretchable electronic devices and discuss the possibility of further uses and the challenges to be addressed for practical uses. Studies on BC-based stretchable materials have focused initially on the fabrication process of stretchable conductors; mixing conductive fillers physically with BCs, infiltrating BCs in a conductive filler layer, and converting metal precursors into metal nanoparticles inside BCs. When conductive fillers with high aspect ratios, such as nanowires or nanosheets are used, the fillers can be infiltrated by the BCs after deposited. Since the contacts between the fillers are maintained during the infiltration process, even thin composite films possess high conductivity and stretchability. The metal precursor solution printing is suggested as a promising approach because it is compatible with traditional printing techniques without clogging the nozzles and allows high filler loading efficiency. When using a BC as a substrate, it is advisable to use a BC/PDMS double layer because of viscoelastic and thermoplastic properties of BCs. If BC/PDMS double layer is used with much thicker PDMS layer instead of viscoelastic BC alone, the double layer substrate can show a perfect elastomeric behavior, and the advantages of the BC substrate are preserved. Additionally, the use of conventional manufacturing techniques is important for commercialization of the stretchable devices. BC substrates having preformed microfibril network on their surfaces facilitate the fabrication of high-resolution circuitry by directly depositing metals through a mask on the substrate. Recent successes of fabricating stretchable organic transistors were obtained based on in situ phase separation of polymer semiconductors to form nanofibril bundles on the surface of a BC substrate. They have led to the achievement of high resolution transistor array printed in large area. BCs are expected to expand their applicability, including stretchable batteries, since they make it feasible to fabricate various hybrid nanocomposites, pore size-controlled membranes, and microstructured surfaces. However, it is necessary to secure long-term stability under heat, solvent, and UV; in addition, there is a need for the synthesis of functional BCs for use in stretchable implanted biomedical devices.