Jianqiao Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianqiao Li has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Meng Zou
Key Laboratory for Bionics Engineering of Education Ministry, Jilin University, Changchun 130022, China
3 shared publications - Rui Zhang
Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun, China
3 shared publications - Feng Qiu
Key Laboratory of Automobile Materials, Ministry of Education and Department of Materials Science and Engineering, Jilin University, Renmin Street NO. 5988, Changchun 130025, China
2 shared publications - Han Huang
Postdoctoral Research Associate, State Key Laboratory of Automotive Safety and Energy, Dept. of Automotive Engineering, Tsinghua Univ., Beijing 100084, China
2 shared publications - Hao Pang
Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun, People’s Republic of China
2 shared publications - Hua Zhang
Aerospace System Engineering Shanghai, Shanghai, People’s Republic of China
2 shared publications
Latest Publications
- 3 May 2021
- Published by Springer Nature in Rendiconti Lincei. Scienze Fisiche e Naturali
- Vol. 32 (2) , 377-387
3D DEM analysis on tractive trafficability of a lunar rover wheel with bionic wheel lugs
- 3 May 2021
- Published by Springer Nature in Rendiconti Lincei. Scienze Fisiche e Naturali
- Vol. 32 (2) , 377-387
3D DEM analysis on tractive trafficability of a lunar rover wheel with bionic wheel lugs
- 8 January 2021
- Published by Springer Nature in Rendiconti Lincei. Scienze Fisiche e Naturali
- Vol. 32 (1) , 191-203
Design of the bionic wheel surface based on the friction characteristics of ostrich planta
- 8 January 2021
- Published by Springer Nature in Rendiconti Lincei. Scienze Fisiche e Naturali
- Vol. 32 (1) , 191-203
Design of the bionic wheel surface based on the friction characteristics of ostrich planta
- Open Access
Mechanical Performances of Typical Robot Feet Intruding into Sands
Four kinds of feet with typical structures, referred to as the hemispherical foot, the semicylindrical foot, the rectangular foot and the circular foot, respectively, were designed and manufactured to study the foot–terrain interaction mechanics for legged robots. Three kinds of quartz sand were selected to study how particle size, shape and compactness affected the physical properties of the substrate and the intrusion performance of mechanical feet. The media with smaller particle sizes had higher bulk densities and lower angles of stability, but no obvious rule was found for particle shapes of quartz sand with different sizes. The intrusion resistive forces and pressures of the hemispherical foot on these three kinds of quartz sand were all less compared with the other three mechanical feet. The particle disturbance areas and motion trends were compared under these four kinds of mechanical feet using discrete element method simulations. The intrusion resistive forces of these mechanical feet first increased and then decreased with the increasing particle sizes of the quartz sand. Moreover, the intrusion resistive forces of these mechanical feet on spherical particles were smaller compared with irregular particles. The corresponding resistive forces of the mechanical feet were characterized based on the compactness of the quartz sand. According to the intrusion test data, the classic pressure–sinkage model was modified, and the relationships between intrusion resistive force and mechanical foot depth were obtained.
Open AccessMechanical Performances of Typical Robot Feet Intruding into Sands
Four kinds of feet with typical structures, referred to as the hemispherical foot, the semicylindrical foot, the rectangular foot and the circular foot, respectively, were designed and manufactured to study the foot–terrain interaction mechanics for legged robots. Three kinds of quartz sand were selected to study how particle size, shape and compactness affected the physical properties of the substrate and the intrusion performance of mechanical feet. The media with smaller particle sizes had higher bulk densities and lower angles of stability, but no obvious rule was found for particle shapes of quartz sand with different sizes. The intrusion resistive forces and pressures of the hemispherical foot on these three kinds of quartz sand were all less compared with the other three mechanical feet. The particle disturbance areas and motion trends were compared under these four kinds of mechanical feet using discrete element method simulations. The intrusion resistive forces of these mechanical feet first increased and then decreased with the increasing particle sizes of the quartz sand. Moreover, the intrusion resistive forces of these mechanical feet on spherical particles were smaller compared with irregular particles. The corresponding resistive forces of the mechanical feet were characterized based on the compactness of the quartz sand. According to the intrusion test data, the classic pressure–sinkage model was modified, and the relationships between intrusion resistive force and mechanical foot depth were obtained.
- 1 March 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Aerospace Engineering
- Vol. 32 (2)
Nonparametric Terrain Estimation for Planetary Rovers Based on Noncontact Rut Measurement
The estimation of terrain mechanical properties is an important mission of planetary exploration rovers. Since only limited resources and human supervision are available, efficient and accurate methods for terrain estimation are required. In this paper, a nonparametric estimation method for the prediction of the terrain parameters is presented. Four characteristic parameters based on telemetry information of planetary rovers were adopted in the method, including wheel load , torque , rut depth (hereinafter referred to as apparent sinkage ), and slip ratio , and 72 identification parameters composed by the characteristic parameters were put forward for terrain estimation. The terrain consisted of simulant regolith classified nonparametrically and artificially defined as three states (loose, natural, and compact states) based on different hardnesses, and four terrain estimation criteria (slack, ideal, partially strict, and strict) were established. Wheel–soil interaction tests were conducted for the terrain estimation, and apparent sinkage based on rut noncontact measurement was analyzed. The optimal identification parameters and estimation criteria were derived through the analysis of evaluation indexes (correct rate, accurate rate, and conservation rate). Experimental validation results indicated that the proposed method could accurately and efficiently estimate the mechanical state of deformable terrain for planetary rovers.- 1 March 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Aerospace Engineering
- Vol. 32 (2)
Nonparametric Terrain Estimation for Planetary Rovers Based on Noncontact Rut Measurement
The estimation of terrain mechanical properties is an important mission of planetary exploration rovers. Since only limited resources and human supervision are available, efficient and accurate methods for terrain estimation are required. In this paper, a nonparametric estimation method for the prediction of the terrain parameters is presented. Four characteristic parameters based on telemetry information of planetary rovers were adopted in the method, including wheel load , torque , rut depth (hereinafter referred to as apparent sinkage ), and slip ratio , and 72 identification parameters composed by the characteristic parameters were put forward for terrain estimation. The terrain consisted of simulant regolith classified nonparametrically and artificially defined as three states (loose, natural, and compact states) based on different hardnesses, and four terrain estimation criteria (slack, ideal, partially strict, and strict) were established. Wheel–soil interaction tests were conducted for the terrain estimation, and apparent sinkage based on rut noncontact measurement was analyzed. The optimal identification parameters and estimation criteria were derived through the analysis of evaluation indexes (correct rate, accurate rate, and conservation rate). Experimental validation results indicated that the proposed method could accurately and efficiently estimate the mechanical state of deformable terrain for planetary rovers.- Open Access
- 26 April 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (5) , 674
Microstructure and Mechanical Properties of the Dactylopodites of the Chinese Mitten Crab (Eriocheir sinensis)
The dactylopodites of the Chinese mitten crab (Eriocheir sinensis) have evolved extraordinary resistance to wear and impact loading after direct contact with rough surfaces or clashing with hard materials. In this study, the microstructure, components, and mechanical properties of the dactylopodites of the Chinese mitten crab were investigated. Images from a scanning electron microscope show that the dactylopodites’ exoskeleton was multilayered, with an epicuticle, exocuticle, and endocuticle. Cross sections and longitudinal sections of the endocuticle revealed a Bouligand structure, which contributes to the dactylopodites’ mechanical properties. The main organic constituents of the exoskeleton were chitin and protein, and the major inorganic compound was CaCO3, crystallized as calcite. Dry and wet dactylopodites were brittle and ductile, respectively, characteristics that are closely related to their mechanical structure and composition. The findings of this study can be a reference for the bionic design of strong and durable structural materials.
- 26 April 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (5) , 674
Open AccessMicrostructure and Mechanical Properties of the Dactylopodites of the Chinese Mitten Crab (Eriocheir sinensis)
The dactylopodites of the Chinese mitten crab (Eriocheir sinensis) have evolved extraordinary resistance to wear and impact loading after direct contact with rough surfaces or clashing with hard materials. In this study, the microstructure, components, and mechanical properties of the dactylopodites of the Chinese mitten crab were investigated. Images from a scanning electron microscope show that the dactylopodites’ exoskeleton was multilayered, with an epicuticle, exocuticle, and endocuticle. Cross sections and longitudinal sections of the endocuticle revealed a Bouligand structure, which contributes to the dactylopodites’ mechanical properties. The main organic constituents of the exoskeleton were chitin and protein, and the major inorganic compound was CaCO3, crystallized as calcite. Dry and wet dactylopodites were brittle and ductile, respectively, characteristics that are closely related to their mechanical structure and composition. The findings of this study can be a reference for the bionic design of strong and durable structural materials.
- 1 March 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Aerospace Engineering
- Vol. 31 (2)
Pressure-Bearing Parameter Identification for Martian Soil Based on a Terramechanics Model and Genetic Algorithm
A wheel-terrain interaction mechanics model based on terramechanics and simplified force and moment reconstruction is introduced. The model comprises pressure-bearing parameters (combined deformation modulus and slip sinkage exponent), wheel load, driving torque, slip ratio, and wheel sinkage. A genetic algorithm is used to identify the pressure-bearing parameters using a calibration dataset. Experiments were performed on the calibration dataset and a prediction dataset using a single-wheel soil bin to measure the driving torque, wheel sinkage, and drawbar pull of a griddle net wheel under different slip ratios. The proposed model comprises two processes. The first process is to determine the slip sinkage exponent using its empirical value to estimate the combined deformation modulus, and the second is to correct the slip sinkage exponent in which the value of the combined deformation modulus is fixed. The prediction dataset was used to validate the model, with the wheel sinkage and drawbar pull calculated using the wheel-terrain interaction mechanics model with the identified pressure-bearing parameters. The correlation coefficients of the predicted and measured values of the wheel sinkage and drawbar pull were 0.9712 and 0.8902, respectively. An additional experiment was performed with a continuous slip ratio ranging from 0.16 to 0.7 and a wheel load of 50 N to validate the proposed model, and the correlation coefficient between the predicted and measured wheel sinkage was 0.9660. The experimental results demonstrate that the genetic algorithm is able to accurately predict the pressure-bearing parameters, which can be used for traversability prediction, risk assessment, and automatic path planning.
- 1 March 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Aerospace Engineering
- Vol. 31 (2)
Pressure-Bearing Parameter Identification for Martian Soil Based on a Terramechanics Model and Genetic Algorithm
A wheel-terrain interaction mechanics model based on terramechanics and simplified force and moment reconstruction is introduced. The model comprises pressure-bearing parameters (combined deformation modulus and slip sinkage exponent), wheel load, driving torque, slip ratio, and wheel sinkage. A genetic algorithm is used to identify the pressure-bearing parameters using a calibration dataset. Experiments were performed on the calibration dataset and a prediction dataset using a single-wheel soil bin to measure the driving torque, wheel sinkage, and drawbar pull of a griddle net wheel under different slip ratios. The proposed model comprises two processes. The first process is to determine the slip sinkage exponent using its empirical value to estimate the combined deformation modulus, and the second is to correct the slip sinkage exponent in which the value of the combined deformation modulus is fixed. The prediction dataset was used to validate the model, with the wheel sinkage and drawbar pull calculated using the wheel-terrain interaction mechanics model with the identified pressure-bearing parameters. The correlation coefficients of the predicted and measured values of the wheel sinkage and drawbar pull were 0.9712 and 0.8902, respectively. An additional experiment was performed with a continuous slip ratio ranging from 0.16 to 0.7 and a wheel load of 50 N to validate the proposed model, and the correlation coefficient between the predicted and measured wheel sinkage was 0.9660. The experimental results demonstrate that the genetic algorithm is able to accurately predict the pressure-bearing parameters, which can be used for traversability prediction, risk assessment, and automatic path planning.
- Open Access
- 2 June 2017
- Published by MDPI AG in Applied Sciences
- Vol. 7 (6) , 575
Bionic Walking Foot and Mechanical Performance on Soil
The surface structure of the Chinese mitten crab dactylopodite was investigated. The results indicated that the Chinese mitten crab dactylopodite has grooves with variable section structure on the surface of dactylopodite for achieving good traveling behavior on soft terrain. Surface structure plays a key role in the walking performance of the leg mechanism. Based on the bionics coupling theory, three bionic walking feet with different section shapes, including circular (Bio 1), circular with grooves (Bio 2), hexagon (Bio 3) and a cylinder foot used for comparison on the aluminum alloy, were designed and fabricated successfully. Meanwhile, comparative experiments on intrusion, extraction and propulsion for walking feet were conducted on different soil. Experimental results show that a bionic walking foot reduced the energy consumption of insertion and extraction, which topped out to 93.95% and 92.78% of cylinder foot, and Bio 2 behaves better. Propulsion is closely correlated with intrusion depth; therefore, compared with cylinder foot, the sinkage of a bionic walking foot helps to achieve a larger propulsion force with the same pressure. Furthermore, the proper depth in balancing the sinkage and propulsion was discussed, which enables us to optimize the structure and performance of a walking foot.
- 2 June 2017
- Published by MDPI AG in Applied Sciences
- Vol. 7 (6) , 575
Open AccessBionic Walking Foot and Mechanical Performance on Soil
The surface structure of the Chinese mitten crab dactylopodite was investigated. The results indicated that the Chinese mitten crab dactylopodite has grooves with variable section structure on the surface of dactylopodite for achieving good traveling behavior on soft terrain. Surface structure plays a key role in the walking performance of the leg mechanism. Based on the bionics coupling theory, three bionic walking feet with different section shapes, including circular (Bio 1), circular with grooves (Bio 2), hexagon (Bio 3) and a cylinder foot used for comparison on the aluminum alloy, were designed and fabricated successfully. Meanwhile, comparative experiments on intrusion, extraction and propulsion for walking feet were conducted on different soil. Experimental results show that a bionic walking foot reduced the energy consumption of insertion and extraction, which topped out to 93.95% and 92.78% of cylinder foot, and Bio 2 behaves better. Propulsion is closely correlated with intrusion depth; therefore, compared with cylinder foot, the sinkage of a bionic walking foot helps to achieve a larger propulsion force with the same pressure. Furthermore, the proper depth in balancing the sinkage and propulsion was discussed, which enables us to optimize the structure and performance of a walking foot.
- Open Access
- 1 January 2013
- Published by Atlantis Press SARL
The Liquid and Plastic Limit Data Treated System Based on VC++
- 1 January 2013
- Published by Atlantis Press SARL
Open AccessThe Liquid and Plastic Limit Data Treated System Based on VC++
- 17 October 2010
- Published by Springer Nature in Science China Technological Sciences
- Vol. 53 (11) , 2989-2995
Resistance reduction by bionic coupling of the earthworm lubrication function
- 17 October 2010
- Published by Springer Nature in Science China Technological Sciences
- Vol. 53 (11) , 2989-2995
Resistance reduction by bionic coupling of the earthworm lubrication function
- 17 October 2010
- Published by Springer Nature in Science China Technological Sciences
- Vol. 53 (11) , 2960-2965
Effects of bionic non-smooth surface on reducing soil resistance to disc ploughing
- 17 October 2010
- Published by Springer Nature in Science China Technological Sciences
- Vol. 53 (11) , 2960-2965
Effects of bionic non-smooth surface on reducing soil resistance to disc ploughing