PRPiotr Ruta

Piotr Ruta

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Piotr Ruta has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of Changing the Support Points, Within a Fixed Cross-Section, on the Static Response of a Double-Layer Beam

    by Piotr Ruta, Katarzyna Misiurek, Olga Szyłko-Bigus, Monika Podwórna

    The paper presents the analysis of the influence of the location and characteristics of supports on the static response of two-layer beams. The possibility of tangential movement at the supports was considered. Multilayer beams, which combine the advantages of different materials, are widely used in construction. The authors’ previous research showed that the stiffness of the connection between layers significantly affects the behaviour of the system. This paper demonstrates that the supports’ position is another crucial factor that influences the beams’ response, which is an issue that has not been previously considered in the literature. A two-layer system was modelled using the Euler–Bernoulli beam theory. Consistent normal displacements and tangential forces at the layer interface, which were proportional to the relative slip, were assumed. From the equilibrium equations and considered assumptions, three coupled displacement equations were derived and then solved using finite Fourier transforms. They were applied to solve beams, the two ends of which cannot move in the direction perpendicular to the beam’s axis, with at least one of the beam ends being a pinned support. To verify the method’s accuracy, several numerical examples were analysed. It was shown that both the support position and the possibility of tangential displacement at the supports have a significant impact on the static response. Additionally, the crucial role of the stiffness of the interlayer connection was confirmed. The developed approach provides a practical tool for assessing two-layer beam systems and highlights the importance of considering support conditions in the design and analysis of such structures.

  • Open Access

    The Effects of Changing the Support Point in a Given Cross Section on Structural Stability

    by Józef Szybiński, Piotr Ruta

    The aim of this study was to examine the effect of a change of the beam support point within the same support cross section and that of a change in the location of load application points on critical load values. In the literature on the stability of structures, the problem of a change of a rod system’s support point (within the same cross section) is neglected. Solely the effect of a change in load application points on the critical load value is considered. In this study, displacement differential equations describing the general stability loss problem for any nonprismatic thin-walled beam were derived. To solve the equations an approximation method (described in earlier papers by the authors), using the Chebyshev series of the first kind to approximate the sought functions, was employed. In the provided numerical examples the buckling problem was solved for nonprismatic I-beams with a bisymmetric cross section and a monosymmetric cross section. The determined critical load values were compared with the results obtained using the finite element method and the commercial Sofistik software. The results obtained in this study show the significant effect of beam support point location (within the same cross section), as well as the effect of load application point location, on critical load values.

  • Open Access

    Static analysis of a two-layer beam with a flexible interlayer connection

    by Katarzyna Misiurek, Monika Podwórna, Piotr Ruta, Olga Szyłko-Bigus, Rafał Idzikowski

    This research aims to develop an algorithm that allows for the analysis of the influence of interlayer connections on the static response of double-layer beams. Since their construction uses the advantages of different materials, multilayer beams are widely used in the construction industry. The critical element of these types of structures is the connection between layers, the stiffness of which can significantly affect the static response of the system, and therefore its strength. The Euler-Bernoulli model was used to describe the double-layer beams. In the paper, the compliance of normal displacements in multilayer and double-layer beams was considered based on the research of other authors. It was also assumed that the tangential interactions at the connection of layers were tangential forces that are proportional to the relative tangential displacement (slip) of these layers. This general approach eliminates the need for a broader analysis of the connection (its description and structure) with regard to the applied “connector” between the layers. Using equilibrium equations and the adopted assumptions, a system of displacement equations was derived. This system is formed by three coupled second- and fourth-order differential equations, the exact solution of which is a nontrivial mathematical problem. This system was solved using the finite sine and cosine Fourier transform. Although the algorithm presented in the paper was used to solve a specific set of equations that describe a simply supported beam, the formulas derived in the paper allow for solving beams with other support schemes. The Fourier transformation method, after appropriate modifications (changing the boundary conditions and, in some cases, changing the sine to cosine transformation and vice versa), can be used to solve beams that have other support conditions. To verify the correctness and effectiveness of the described method, two numerical examples were solved. In the first one, the influence of the variable value of the tangential stiffness of the connection on the values ??and distribution of internal forces (including the influence on the values ??of normal stresses) was analyzed. In the second example, calculations were performed for an example taken from the literature, and the obtained results were compared with the results obtained by other authors. The analyzed examples confirmed the significant influence of the tangential stiffness of the layer connection on the static response of the system. Furthermore, they confirmed the correctness and high accuracy of the method that was used to solve the problem.


  • Static Analysis of Two-Layer Beam with Flexible Interlayer Connection: Numerical Investigations and Research Perspectives

    by Katarzyna Misiurek, Monika Podwórna, Piotr Ruta, Olga Szyłko-Bigus, Rafał Idzikowski

  • Effect of a “Slight” Curvature of the Axis of a Thin-Walled Nonprismatic Beam on its Free Vibration

    by Józef Szybiński, Piotr Ruta

    This paper presents an analysis of the effect of a “slight” curvature of the axis of a thin-walled beam on its eigenfrequencies and forms. By “slight” we understand such a beam curvature at which no theory of curved beams (arches, horizontally curved girders), but classical beam theory is applied. The subject of the analysis is the open nonprismatic thin-walled beams with any geometrical parameters, and prismatic beams. The thin-walled beam model used in the analysis was derived on the basis of the momentless theory of plates, using the Vlasov assumptions. The free vibrations of the beams were analysed. Calculations were performed for four groups of beams. Each of the groups comprised two beams with the same configuration of flanges and identical geometrical cross section characteristics, but differing in web geometry. One of the beams had a symmetrical web (a beam with a rectilinear axis in the web plane), whereas the web of the other beam was asymmetrical (a beam with its axis curved in the web plane). The algorithm based on Chebyshev polynomials was used to solve the variable coefficient equations describing the model’s vibration. According to this algorithm, solutions are sought in the form of Chebyshev series and the closed analytical recurrence formulas generated by the algorithm are used to calculate the coefficients of the equations. It has been shown that even a “slight” curvature of the beam’s axis has a significant effect on its eigenfrequencies and forms, as confirmed by a comparison of the results with the ones obtained using Finite Element Method (FEM).


  • Open Access

    Analysis of thin-walled beams with variable monosymmetric cross section by means of Legendre polynomials

    by Józef Szybiński, Piotr Ruta

    This article deals with the vibrations of a nonprismatic thin-walled beam with an open cross section and any geometrical parameters. The thin-walled beam model presented in this article was described using the membrane shell theory, whilst the equations were derived based on the Vlasov theory assumptions. The model is a generalisation of the model presented by Wilde (1968) in ‘The torsion of thin-walled bars with variable cross-section’, Archives of Mechanics, 4, 20, pp. 431–443. The Hamilton principle was used to derive equations describing the vibrations of the beam. The equations were derived relative to an arbitrary rectilinear reference axis, taking into account the curving of the beam axis and the axis formed by the shear centres of the beam cross sections. In most works known to the present authors, the equations describing the nonprismatic thin-walled beam vibration problem do not take into account the effects stemming from the curving (the inclination of the walls of the thin-walledcross section towards to the beam axis) of the analysed systems. The recurrence algorithm described in Lewanowicz’s work (1976) ‘Construction of a recurrence relation of the lowest order for coefficients of the Gegenbauer series’, Applicationes Mathematicae, XV(3), pp. 345–396, was used to solve the derived equations with variable coefficients. The obtained solutions of the equations have the form of series relative to Legendre polynomials. A numerical example dealing with the free vibrations of the beam was solved to verify the model and the effectiveness of the presented solution method. The results were compared with the results yielded by finite elements method (FEM).


  • Open Access

    Analysis of the Spatial Vibration of Nonprismatic Arches by Means of Recurrence Relations for the Coefficients of the Chebyshev Series Expansion of the Solution

    by P. Ruta, M. Meissner

    The problem of spatial vibrations, both aperiodically forced and free vibrations, of an arch with an arbitrary distribution of material and geometric parameters is considered. Approximation with Chebyshev series was used to solve a conjugated system of partial differential equations describing the problem. The system of differential equations was solved using an algorithm generating a recursive infinite system of equations, developed by S. Paszkowski in “Numerical applications of Chebyshev polynomials” (in Polish), Warsaw PWN, 1975. Since the coefficients of the obtained system of equations are defined by closed analytical formulas they can be directly used to solve any nonprismatic arch, without it being necessary to solve again the considered problem. The algorithm is highly accurate; i.e., already at a small approximation base it yields results agreeing with exact analytical solutions (obviously for problems in the case of which such solutions can be derived). In order to demonstrate this the eigenfrequencies and eigenvectors obtained for a circular prismatic arch were compared with their precise values determined from the exact analytical solutions. The results yielded by the proposed method were also compared with the results obtained by other methods and by other authors. As an illustration, the proposed method was used to solve a more complex problem, i.e., the problem of the free and aperiodically forced vibrations of a nonprismatic arch with its axis described by a catenary curve. In the example the effect of the lack of cross-sectional symmetry of the arch on the form of the system’s spatial free and forced vibrations was analysed.