Sebastien Vincent Bonnieu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sebastien Vincent Bonnieu has a total of 299 co-authors. Here are the top co-authors by number of shared publications:
- Rouhollah Farajzadeh
Delft University of Technology
22 shared publications - Ali Akbar Eftekhari
Delft University of Technology, the Netherlands
8 shared publications W.R. Rossen
7 shared publicationsR. Z. Kamarul Bahrim
Petronas
6 shared publications- William Richard Rossen
Department of Geoscience and Engineering, Delft University of Technology
6 shared publications - Marcello Lappa
University of Strathclyde
5 shared publications
Latest Publications
- Open Access
- 3 September 2026
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 50 (17) , 6124-6153
Computational Analysis of the Vibrational Response of Lunar Regolith Made of Nonspherical Grains
Vibration‐based systems have shown that appropriately oriented and tuned mechanical oscillations can disrupt regolith interlocking and promote flow. Building on this evidence, the present study investigates vibration‐controlled granular discharge as a potential ISRU (In Situ Resource Utilization) strategy, with the aim of supporting predictable material processing through physically consistent numerical modeling. The equations governing the dynamics of nonspherical particles are presented accordingly and used to simulate the behavior of a fixed mass of granular material flowing through a hopper device in the framework of the discrete element method (DEM). The results show that even for monodisperse distributions vibration‐induced fluidization does not follow simple monotonic trends. The mass flow rate initially increases with the forcing frequency f , reaching a plateau in the range of 150–200 Hz, beyond which further frequency increases produce no significant enhancement. At the same time, higher values of the dimensionless acceleration Γ generally reduce the mass flow rate and cause an increase in the frequency threshold above which vibration‐driven discharge exceeds gravity‐driven flow. Moreover, for fixed, moderately low values of Γ, increasing f leads to the emergence of higher‐order harmonics in the instantaneous mass flow rate. For fixed and relatively high values of f , a larger value of Γ can cause the appearance of subharmonics in the spectrum. In contrast, for relatively low f and high Γ, incommensurate spectral components appear, which reduce the regularity and predictability of the flow response. These findings are supported by a detailed analysis of particle patterning behavior and frequency spectra, which reveals the fine‐scale dynamics underlying the observed flow regimes.
- 3 September 2026
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 50 (17) , 6124-6153
Open AccessComputational Analysis of the Vibrational Response of Lunar Regolith Made of Nonspherical Grains
Vibration‐based systems have shown that appropriately oriented and tuned mechanical oscillations can disrupt regolith interlocking and promote flow. Building on this evidence, the present study investigates vibration‐controlled granular discharge as a potential ISRU (In Situ Resource Utilization) strategy, with the aim of supporting predictable material processing through physically consistent numerical modeling. The equations governing the dynamics of nonspherical particles are presented accordingly and used to simulate the behavior of a fixed mass of granular material flowing through a hopper device in the framework of the discrete element method (DEM). The results show that even for monodisperse distributions vibration‐induced fluidization does not follow simple monotonic trends. The mass flow rate initially increases with the forcing frequency f , reaching a plateau in the range of 150–200 Hz, beyond which further frequency increases produce no significant enhancement. At the same time, higher values of the dimensionless acceleration Γ generally reduce the mass flow rate and cause an increase in the frequency threshold above which vibration‐driven discharge exceeds gravity‐driven flow. Moreover, for fixed, moderately low values of Γ, increasing f leads to the emergence of higher‐order harmonics in the instantaneous mass flow rate. For fixed and relatively high values of f , a larger value of Γ can cause the appearance of subharmonics in the spectrum. In contrast, for relatively low f and high Γ, incommensurate spectral components appear, which reduce the regularity and predictability of the flow response. These findings are supported by a detailed analysis of particle patterning behavior and frequency spectra, which reveals the fine‐scale dynamics underlying the observed flow regimes.
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
Granular Matter in Space: Microgravity Experiments and Implications for Regolith Behaviour
Understanding the behaviour of planetary regolith under low-gravity conditions is essential for the design of future exploration systems and surface operations. Over the past two decades, the European Space Agency (ESA) has conducted various microgravity experiments on granular matter, combining vibration-driven dynamics and compaction studies across sounding rockets, parabolic flights, and long-duration investigations onboard the International Space Station (ISS).Sounding rocket and parabolic experiments have enabled the study of dilute granular gases under near-weightless conditions, revealing strongly non-equilibrium behaviours such as the breakdown of energy equipartition and modifications of collisional dynamics in anisotropic particle systems. Complementary parabolic flight campaigns have provided insights into dense granular regimes relevant to regolith, demonstrating three-dimensional compaction, non-linear collision scaling, and vibration-driven convection phenomena, while also quantifying the influence of residual accelerations. More recently, ISS experiments have enabled systematic investigations of granular systems subjected to controlled vibration forcing over extended durations. These studies have highlighted key mechanisms such as segregation, convection-like transport driven by energy gradients, and the transition between dilute and dense regimes. Such observations provide direct analogues to processes expected in planetary regolith exposed to mechanical perturbations, including rover interactions, drilling, or seismic shaking. These multi-platform results will be presented, bridging the gap between fundamental granular physics and the behaviour of regolith in planetary environments, supporting the development of predictive models and technologies for surface mobility, sampling, and in-situ resource utilisation on the Moon, Mars, and small bodies.
- 2 July 2026
- Published by Copernicus GmbH
Open AccessGranular Matter in Space: Microgravity Experiments and Implications for Regolith Behaviour
Understanding the behaviour of planetary regolith under low-gravity conditions is essential for the design of future exploration systems and surface operations. Over the past two decades, the European Space Agency (ESA) has conducted various microgravity experiments on granular matter, combining vibration-driven dynamics and compaction studies across sounding rockets, parabolic flights, and long-duration investigations onboard the International Space Station (ISS).Sounding rocket and parabolic experiments have enabled the study of dilute granular gases under near-weightless conditions, revealing strongly non-equilibrium behaviours such as the breakdown of energy equipartition and modifications of collisional dynamics in anisotropic particle systems. Complementary parabolic flight campaigns have provided insights into dense granular regimes relevant to regolith, demonstrating three-dimensional compaction, non-linear collision scaling, and vibration-driven convection phenomena, while also quantifying the influence of residual accelerations. More recently, ISS experiments have enabled systematic investigations of granular systems subjected to controlled vibration forcing over extended durations. These studies have highlighted key mechanisms such as segregation, convection-like transport driven by energy gradients, and the transition between dilute and dense regimes. Such observations provide direct analogues to processes expected in planetary regolith exposed to mechanical perturbations, including rover interactions, drilling, or seismic shaking. These multi-platform results will be presented, bridging the gap between fundamental granular physics and the behaviour of regolith in planetary environments, supporting the development of predictive models and technologies for surface mobility, sampling, and in-situ resource utilisation on the Moon, Mars, and small bodies.
- Open Access
- 10 June 2026
- Published by IOP Publishing in Journal of Physics: Materials
- Vol. 9 (3) , 032501
Roadmap on materials development and utilization in space
Materials science underpins national economies and infrastructures worldwide, contributing significantly to the delivery of key services, as well as underpinning multiple industrial sectors, including space. The space sector, represents a cornerstone of technological progress, driving both direct and indirect innovation across many terrestrial fields. Taken together, materials science and the space sector represent a transformative frontier for innovation that remains only partially exploited, offering opportunities for scientific, economic, and societal advancement. In this context, this roadmap presents a special focus on where such interplay can yield fruitful outcomes over the next two decades, exploring specific intersections between these fields. The rationale behind this is routed in the current demand and forward view for specialised materials to address both terrestrial challenges and extraterrestrial ambitions, with the global space economy projected to reach $1.8 trillion by 2035, requiring a concerted focus on interdisciplinary collaboration. Microgravity provides a unique platform to achieve this, enabling critical insights, more precise control over material formation and the creation of advanced materials with enhanced properties for diverse applications. These breakthroughs are already informing terrestrial applications across industries, from semiconductors to pharmaceuticals, while laying the groundwork for advanced manufacturing in space. Emerging sectors such as the “In-Orbit Economy” and in-situ resource utilisation (ISRU) further underscore this critical opportunity, emphasising the need for resilient materials that can withstand the harsh conditions of space and utilise extraterrestrial resources sustainably. This roadmap brings together a diverse array of contributions covering relevant subjects across these areas—from space exploration and ISRU to the production of new inorganic, organic, and even “living” materials on microgravity platforms—while paying special attention to concrete examples, i.e. cases with a technological readiness level of 4 or higher, which warrant continued attention and effort.
- 10 June 2026
- Published by IOP Publishing in Journal of Physics: Materials
- Vol. 9 (3) , 032501
Open AccessRoadmap on materials development and utilization in space
Materials science underpins national economies and infrastructures worldwide, contributing significantly to the delivery of key services, as well as underpinning multiple industrial sectors, including space. The space sector, represents a cornerstone of technological progress, driving both direct and indirect innovation across many terrestrial fields. Taken together, materials science and the space sector represent a transformative frontier for innovation that remains only partially exploited, offering opportunities for scientific, economic, and societal advancement. In this context, this roadmap presents a special focus on where such interplay can yield fruitful outcomes over the next two decades, exploring specific intersections between these fields. The rationale behind this is routed in the current demand and forward view for specialised materials to address both terrestrial challenges and extraterrestrial ambitions, with the global space economy projected to reach $1.8 trillion by 2035, requiring a concerted focus on interdisciplinary collaboration. Microgravity provides a unique platform to achieve this, enabling critical insights, more precise control over material formation and the creation of advanced materials with enhanced properties for diverse applications. These breakthroughs are already informing terrestrial applications across industries, from semiconductors to pharmaceuticals, while laying the groundwork for advanced manufacturing in space. Emerging sectors such as the “In-Orbit Economy” and in-situ resource utilisation (ISRU) further underscore this critical opportunity, emphasising the need for resilient materials that can withstand the harsh conditions of space and utilise extraterrestrial resources sustainably. This roadmap brings together a diverse array of contributions covering relevant subjects across these areas—from space exploration and ISRU to the production of new inorganic, organic, and even “living” materials on microgravity platforms—while paying special attention to concrete examples, i.e. cases with a technological readiness level of 4 or higher, which warrant continued attention and effort.
- Open Access
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 533-556
The response of lunar regolith simulants of varying particle size ranges to vertical and horizontal vibrations
Granular fluidization is a method currently being investigated to mitigate the strong frictional and electrostatic interparticle forces that the material on the surface of the Moon, known as lunar regolith, exhibits. The reason for this ongoing line of inquiry is the eventual utilization of this material for numerous applications, e.g., feedstock for 3D-printed concrete structures or as a solid-support substrate for plant growth and/or oxygen and propellant extraction. It is known that when lunar regolith simulants are housed in a vessel vibrated at a given amplitude and frequency, the material can display fluidlike attributes and convective motion, which can be exploited for its excavation and/or transportation. In this study, three simulants were vibrated at different frequencies and amplitudes. Each simulant had a different particle size range (<0.04−250, <0.04–90, and <0.04–35 μm) and accordingly a different particle average size. It was discovered that when applying vertical vibrations, by increasing the average particle size, convective motion can be strengthened. In the case of horizontal vibrations, the opposite occurs, whereby the overall convective movement generally increases on reducing the average particle size. It was also observed that different (transverse, longitudinal, and “hybrid”) convective modes can be excited according to the considered frequency, strength, and direction of vibrations; moreover, for the simulant with the lowest average particle size, a specific frequency exists at which particle aggregation phenomena show up regardless of the direction of vibrations. In such conditions, particles form macroscopic clusters due to the excitation of electrostatic forces.
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 533-556
Open AccessThe response of lunar regolith simulants of varying particle size ranges to vertical and horizontal vibrations
Granular fluidization is a method currently being investigated to mitigate the strong frictional and electrostatic interparticle forces that the material on the surface of the Moon, known as lunar regolith, exhibits. The reason for this ongoing line of inquiry is the eventual utilization of this material for numerous applications, e.g., feedstock for 3D-printed concrete structures or as a solid-support substrate for plant growth and/or oxygen and propellant extraction. It is known that when lunar regolith simulants are housed in a vessel vibrated at a given amplitude and frequency, the material can display fluidlike attributes and convective motion, which can be exploited for its excavation and/or transportation. In this study, three simulants were vibrated at different frequencies and amplitudes. Each simulant had a different particle size range (<0.04−250, <0.04–90, and <0.04–35 μm) and accordingly a different particle average size. It was discovered that when applying vertical vibrations, by increasing the average particle size, convective motion can be strengthened. In the case of horizontal vibrations, the opposite occurs, whereby the overall convective movement generally increases on reducing the average particle size. It was also observed that different (transverse, longitudinal, and “hybrid”) convective modes can be excited according to the considered frequency, strength, and direction of vibrations; moreover, for the simulant with the lowest average particle size, a specific frequency exists at which particle aggregation phenomena show up regardless of the direction of vibrations. In such conditions, particles form macroscopic clusters due to the excitation of electrostatic forces.
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 557-579
Vibrationally aided flow of lunar regolith simulants in a hopper-based conveying device
Hoppers are expected to play an essential role in handling of lunar regolith for future lunar exploration missions from collection and storage to in situ resource utilization. This study presents a parametric experimental investigation of regolith discharge dynamics by using the LHS-1 simulant. Results show that vertical vibrations significantly affect the regularity of the flow of granular material through the orifice of the hopper, the average mass flow rate, the spatio-temporal patterning of the material displacement, and the occurrence of jamming (clogging) phenomena. While the average mass flow rate is consistently smaller than that obtained in purely gravitational flow, vibrations induce a significant reduction in the probability of arching and make the overall flow of material much more regular and spatially uniform. Four different flow configurations are identified accordingly in the entire space of parameters, i.e., “funnel,” “mass,” “asymmetric,” and “ratholing” flow. The “funnel” is the most common, while asymmetric and ratholing regimes are only attained for relatively high shaking frequency and amplitude. Low frequencies universally promote arching due to insufficient energy to disrupt force chains within the material. In contrast, the role of high frequencies is more complex, with clogging re-emerging at certain thresholds, particularly at low acceleration amplitude. Increasing the vibration amplitude generally mitigates blockage, but its effectiveness weakens with sample mass growth, indicating that additional factors, such as gravity-induced compaction and related particle rearrangement dynamics also play a significant role in governing such events.
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 557-579
Vibrationally aided flow of lunar regolith simulants in a hopper-based conveying device
Hoppers are expected to play an essential role in handling of lunar regolith for future lunar exploration missions from collection and storage to in situ resource utilization. This study presents a parametric experimental investigation of regolith discharge dynamics by using the LHS-1 simulant. Results show that vertical vibrations significantly affect the regularity of the flow of granular material through the orifice of the hopper, the average mass flow rate, the spatio-temporal patterning of the material displacement, and the occurrence of jamming (clogging) phenomena. While the average mass flow rate is consistently smaller than that obtained in purely gravitational flow, vibrations induce a significant reduction in the probability of arching and make the overall flow of material much more regular and spatially uniform. Four different flow configurations are identified accordingly in the entire space of parameters, i.e., “funnel,” “mass,” “asymmetric,” and “ratholing” flow. The “funnel” is the most common, while asymmetric and ratholing regimes are only attained for relatively high shaking frequency and amplitude. Low frequencies universally promote arching due to insufficient energy to disrupt force chains within the material. In contrast, the role of high frequencies is more complex, with clogging re-emerging at certain thresholds, particularly at low acceleration amplitude. Increasing the vibration amplitude generally mitigates blockage, but its effectiveness weakens with sample mass growth, indicating that additional factors, such as gravity-induced compaction and related particle rearrangement dynamics also play a significant role in governing such events.
- Open Access
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 597-617
Rheology in space—A review of past and present ESA experiments
Gravity affects the flow and the behavior at rest of complex fluids by inducing sedimentation, drainage, and interfacial deformation, which can mask more fundamental physical processes. On Earth, standard countermeasures against gravity come with limitations in terms of possible formulations or the quality and homogeneity of the applied strain. Alternatively, one can run these experiments in free-fall where the effects of gravity are canceled, i.e., under microgravity conditions. In this Short Review, we present several European Space Agency (ESA)-led projects of interest to rheologists that leverage microgravity environments, including interfacial rheology experiments using capillary pressure tensiometers; Fundamental experiments on the coarsening of foams and the intrinsic dynamics and microrheology of emulsion droplets; Multiple granular materials investigations on the transition to jamming, fluidized beds, quasistatic and dilute granular flows; Experiments examining the thermally driven perturbation of soft colloidal glasses; And studies of the aggregation dynamics and migration of soft particles and red blood cells under flow. The microgravity conditions offered by the ESA platforms enabled high-precision measurements of interfacial viscoelasticity; revealed plastic rearrangements in colloidal glasses; detected roaming bubbles in foams, and underlined the progressive arrest of droplet motion in emulsions; uncovered margination effects in blood cell analogues under flow; and rationalized the impact of gravity on convection and fluidization in agitated granular matter. Collectively, these experiments demonstrate the complementarity and the relevance of ESA’s microgravity platforms in expanding the frontiers of soft matter rheology.
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 597-617
Open AccessRheology in space—A review of past and present ESA experiments
Gravity affects the flow and the behavior at rest of complex fluids by inducing sedimentation, drainage, and interfacial deformation, which can mask more fundamental physical processes. On Earth, standard countermeasures against gravity come with limitations in terms of possible formulations or the quality and homogeneity of the applied strain. Alternatively, one can run these experiments in free-fall where the effects of gravity are canceled, i.e., under microgravity conditions. In this Short Review, we present several European Space Agency (ESA)-led projects of interest to rheologists that leverage microgravity environments, including interfacial rheology experiments using capillary pressure tensiometers; Fundamental experiments on the coarsening of foams and the intrinsic dynamics and microrheology of emulsion droplets; Multiple granular materials investigations on the transition to jamming, fluidized beds, quasistatic and dilute granular flows; Experiments examining the thermally driven perturbation of soft colloidal glasses; And studies of the aggregation dynamics and migration of soft particles and red blood cells under flow. The microgravity conditions offered by the ESA platforms enabled high-precision measurements of interfacial viscoelasticity; revealed plastic rearrangements in colloidal glasses; detected roaming bubbles in foams, and underlined the progressive arrest of droplet motion in emulsions; uncovered margination effects in blood cell analogues under flow; and rationalized the impact of gravity on convection and fluidization in agitated granular matter. Collectively, these experiments demonstrate the complementarity and the relevance of ESA’s microgravity platforms in expanding the frontiers of soft matter rheology.
- Open Access
- 23 March 2026
- Published by Elsevier in SSRN Electronic Journal
Thermal conductivity in aerogel-based composite materials based on Percolation Effective-Medium Approximation
The prediction of heat transport in aerogel composite materials remains a challenge due to the complex interplay between filler morphology, connectivity, and dispersion. In this work, the Percolation Effective-Medium Approximation (P-EMA) is employed as a unifying framework to describe thermal transport across a wide range of filler geometries. By introducing a scaling factor, P-EMA successfully captures the transition between effective medium behaviour and percolation-dominated regimes. Fibre-like fillers are characterized by scaling factors well below unity, reflecting their tendency to form conductive networks at low concentrations, while spherical fillers exhibit values slightly above unity, in line with the well-known effective medium approximations. This approach demonstrates the ability of P-EMA to integrate percolating behaviour with effective medium predictions in cases of weak filler connectivity and relatively homogeneous dispersions.
- 23 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessThermal conductivity in aerogel-based composite materials based on Percolation Effective-Medium Approximation
The prediction of heat transport in aerogel composite materials remains a challenge due to the complex interplay between filler morphology, connectivity, and dispersion. In this work, the Percolation Effective-Medium Approximation (P-EMA) is employed as a unifying framework to describe thermal transport across a wide range of filler geometries. By introducing a scaling factor, P-EMA successfully captures the transition between effective medium behaviour and percolation-dominated regimes. Fibre-like fillers are characterized by scaling factors well below unity, reflecting their tendency to form conductive networks at low concentrations, while spherical fillers exhibit values slightly above unity, in line with the well-known effective medium approximations. This approach demonstrates the ability of P-EMA to integrate percolating behaviour with effective medium predictions in cases of weak filler connectivity and relatively homogeneous dispersions.
- Open Access
- 3 March 2026
- Published by Elsevier in SSRN Electronic Journal
Unravelling the mechanisms behind the stabilization of oil foams
Oil foams are emerging as a promising, versatile system in food, cosmetic and pharmaceutical applications. Existing solutions depend on the addition of particles or surfactant crystallization; however, these approaches often require complex processing steps, introduce solid residues that may affect texture, and rely on kinetically trapped interfacial structures that limit reversibility under ambient conditions. Here, we examine the foamability and stability of food-grade, soybean lecithin in oil with different surface tensions. We found that edible oil foams can be formed at room temperature only in long-chain triglyceride oils. By combining microscopy, X-ray techniques, and interfacial rheology, we show that the stabilization arises from the formation of inverse lipid bilayers at the air-oil surface, leading to increased surface elasticity and dense thin-films that protect the gas bubbles against coalescence and drainage. We also discovered that different self-assembled structures are formed in different oils, which is attributed to the surfactant-oil van der Waals interactions and the oil penetration between the surfactants, at the air-oil surface. These findings uncover a molecular mechanism for non-aqueous foam stabilization under ambient conditions and establish design principles for surfactant-stabilized oil foams, without particle additives or crystallization.
- 3 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessUnravelling the mechanisms behind the stabilization of oil foams
Oil foams are emerging as a promising, versatile system in food, cosmetic and pharmaceutical applications. Existing solutions depend on the addition of particles or surfactant crystallization; however, these approaches often require complex processing steps, introduce solid residues that may affect texture, and rely on kinetically trapped interfacial structures that limit reversibility under ambient conditions. Here, we examine the foamability and stability of food-grade, soybean lecithin in oil with different surface tensions. We found that edible oil foams can be formed at room temperature only in long-chain triglyceride oils. By combining microscopy, X-ray techniques, and interfacial rheology, we show that the stabilization arises from the formation of inverse lipid bilayers at the air-oil surface, leading to increased surface elasticity and dense thin-films that protect the gas bubbles against coalescence and drainage. We also discovered that different self-assembled structures are formed in different oils, which is attributed to the surfactant-oil van der Waals interactions and the oil penetration between the surfactants, at the air-oil surface. These findings uncover a molecular mechanism for non-aqueous foam stabilization under ambient conditions and establish design principles for surfactant-stabilized oil foams, without particle additives or crystallization.
- Open Access
- 3 March 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
DropCoal: An instrument to study the drop coalescence in microgravity
- 3 March 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessDropCoal: An instrument to study the drop coalescence in microgravity
- 27 January 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 113 (1) , 015419
Foam coarsening in granular packings
Foam coarsening refers to the process by which gas diffuses between bubbles, leading to an increase in their average size and a corresponding evolution of the foam's physical properties. When foam is confined within a porous medium, this process can continue, albeit in a modified manner. Anticipating the rate of coarsening under such conditions is therefore crucial. In this study, we examine the coarsening dynamics of liquid foam confined within a packing of spherical grains, systematically varying both the grain size and the foam's liquid fraction, in the range of 7% to 25%. Our key finding is that, under confinement, the coarsening rate is much less sensitive to the liquid fraction than in bulk foams. Instead, the dynamics are more strongly governed by the ratio of bubble size to grain size. This behavior is well captured by a model based on the effective liquid fraction-a measure that accounts for the substantial amount of liquid retained at grain surfaces and contacts in the form of liquid bridges. Additionally, we observe numerous small, persistent bubbles located at the periphery of the liquid bridges. These structures act as hosts, facilitating the accumulation of such bubbles, particularly at higher liquid fractions. Depending on the context, this phenomenon may be either advantageous or detrimental to the intended application.
- 27 January 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 113 (1) , 015419
Foam coarsening in granular packings
Foam coarsening refers to the process by which gas diffuses between bubbles, leading to an increase in their average size and a corresponding evolution of the foam's physical properties. When foam is confined within a porous medium, this process can continue, albeit in a modified manner. Anticipating the rate of coarsening under such conditions is therefore crucial. In this study, we examine the coarsening dynamics of liquid foam confined within a packing of spherical grains, systematically varying both the grain size and the foam's liquid fraction, in the range of 7% to 25%. Our key finding is that, under confinement, the coarsening rate is much less sensitive to the liquid fraction than in bulk foams. Instead, the dynamics are more strongly governed by the ratio of bubble size to grain size. This behavior is well captured by a model based on the effective liquid fraction-a measure that accounts for the substantial amount of liquid retained at grain surfaces and contacts in the form of liquid bridges. Additionally, we observe numerous small, persistent bubbles located at the periphery of the liquid bridges. These structures act as hosts, facilitating the accumulation of such bubbles, particularly at higher liquid fractions. Depending on the context, this phenomenon may be either advantageous or detrimental to the intended application.