Ho-Yin Tse
Research Subjects
Ho-Yin Tse has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Chi Shun Yeung
Department of Civil & Environmental Engineering, The Hong Kong Polytechnic University, Hong Kong
5 shared publications - Shao-Yuan Leu
The Hong Kong Polytechnic University
5 shared publications - Paul T. Anastas
Yale University
3 shared publications - Chengyu Dong
University of California San Diego
2 shared publications Chun Yin Lau
2 shared publications- Chun-Yin Lau
Department of Chemical Engineering and Applied Chemistry University of Toronto Toronto Ontario Canada
2 shared publications
Latest Publications
- Open Access
- 13 October 2023
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 25 (23) , 9720-9732
Mechanistic investigation of a Ni-catalyzed electrochemical reductive cleavage of the α-O-4 bond in the lignin model compound benzyl phenyl ether
The electrochemical reductive cleavage of the C–O bond in the lignin α-O-4 model compound benzyl phenyl ether (BPE) at room temperature was investigated using earth-abundant nickel as a catalyst in methanol. Experiments using a divided cell setup using either NiCl2·6H2O salt or pre-deposited Ni on a carbon paper cathode (Ni/CP) under an inert atmosphere revealed the essential role of freshly and uniformly deposited Ni0 on the electrode surface for the reductive, catalytic cleavage to yield phenol and toluene. To better understand the reaction mechanism, the surface morphology and composition of the Ni/CP electrode were investigated by SEM, XRD, and XPS. Additionally, the role of methanol as a proton donor was established, and electrochemical hydrogenation/hydrogenolysis (ECH) experiments of BPE with sterically hindered substituents revealed that the reaction mechanism shares similarities with Pd/C hydrogenation/hydrogenolysis chemistry. DFT calculations further supported this mechanistic route and were consistent with the experimental observations. Based on both experimental and calculation results, a mechanism including (1) the interaction of the benzylic side of BPE with the catalyst surface, (2) adsorbed hydrogen interacting with the benzylic carbon to induce C–O bond scission, and (3) proton transfer to the phenoxy anion from the methanol was proposed.
- 13 October 2023
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 25 (23) , 9720-9732
Open AccessMechanistic investigation of a Ni-catalyzed electrochemical reductive cleavage of the α-O-4 bond in the lignin model compound benzyl phenyl ether
The electrochemical reductive cleavage of the C–O bond in the lignin α-O-4 model compound benzyl phenyl ether (BPE) at room temperature was investigated using earth-abundant nickel as a catalyst in methanol. Experiments using a divided cell setup using either NiCl2·6H2O salt or pre-deposited Ni on a carbon paper cathode (Ni/CP) under an inert atmosphere revealed the essential role of freshly and uniformly deposited Ni0 on the electrode surface for the reductive, catalytic cleavage to yield phenol and toluene. To better understand the reaction mechanism, the surface morphology and composition of the Ni/CP electrode were investigated by SEM, XRD, and XPS. Additionally, the role of methanol as a proton donor was established, and electrochemical hydrogenation/hydrogenolysis (ECH) experiments of BPE with sterically hindered substituents revealed that the reaction mechanism shares similarities with Pd/C hydrogenation/hydrogenolysis chemistry. DFT calculations further supported this mechanistic route and were consistent with the experimental observations. Based on both experimental and calculation results, a mechanism including (1) the interaction of the benzylic side of BPE with the catalyst surface, (2) adsorbed hydrogen interacting with the benzylic carbon to induce C–O bond scission, and (3) proton transfer to the phenoxy anion from the methanol was proposed.
- 12 September 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 375
Energy and carbon footprint analysis of municipal wastewater treatment process integrated with food waste disposer
- 12 September 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 375
Energy and carbon footprint analysis of municipal wastewater treatment process integrated with food waste disposer
- 27 July 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (16) , 6295-6305
Development of a Ni-promoted, selective electrochemical reductive cleavage of the C–O bond in lignin model compound benzyl phenyl ether
Ni-promoted, highly selective electrochemical protocol to reductively cleave the benzylic C–O bond of the α-O-4 lignin model compound benzyl phenyl ether (BPE) at room temperature and ambient pressure.
- 27 July 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (16) , 6295-6305
Development of a Ni-promoted, selective electrochemical reductive cleavage of the C–O bond in lignin model compound benzyl phenyl ether
Ni-promoted, highly selective electrochemical protocol to reductively cleave the benzylic C–O bond of the α-O-4 lignin model compound benzyl phenyl ether (BPE) at room temperature and ambient pressure.
- 4 March 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (7) , 2904-2918
One-pot synthesis to prepare lignin/photoacid nanohybrids for multifunctional biosensors and photo-triggered singlet oxygen generation
This study presents a green, simple, and efficient one-pot synthesis approach for a sustainable lignin nanoparticle biosensor (AL-Por-PP). Lignin was incorporated in a typical 5-5′ linkage interunit for developing azo-coupling under mild conditions. The precursors of this biosensor were targeted to lignin fractionation products, including alkali lignin (AL) and 2-phenylphenol (PP). They were linked by a modified porphyrin (Por), a sophisticated structure in the plant photosynthetic system. The lignin nanoparticles were investigated by various spectroscopic techniques (i.e., heteronuclear single quantum correlation HSQC-NMR, photoluminescence spectroscopy and time-resolved transient state spectroscopy) to characterize the structural and photochemical properties. This green biosensor showed superior harnessing abilities for excited state proton transfer (ESPT) photochemical dynamics of the grafted PP moieties. Lignin provided a stable microenvironment in broad pH ranges (pH 2 to 9) and various anion environments by forming a lignin nanosphere to encapsulate the excited PP moieties, offering a nano-buffering effect on these moieties via the intimate hydrogen bond networking interactions with the functional groups substituted on the lignin backbone. Moreover, AL-Por-PP demonstrated an outstanding selectivity of fluorescence responses to an essential index of asthma and lung cancer, bisulfite ions, in the concentration range of 1 to 20 μM (R2 = 0.99) which extends to live cell imaging. This study offers a sustainable and promising approach for extending the functionalities of lignin and highlights the prospects of valorizing lignin and plant extracts for biomass-based molecular device development and applications.
- 4 March 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (7) , 2904-2918
One-pot synthesis to prepare lignin/photoacid nanohybrids for multifunctional biosensors and photo-triggered singlet oxygen generation
This study presents a green, simple, and efficient one-pot synthesis approach for a sustainable lignin nanoparticle biosensor (AL-Por-PP). Lignin was incorporated in a typical 5-5′ linkage interunit for developing azo-coupling under mild conditions. The precursors of this biosensor were targeted to lignin fractionation products, including alkali lignin (AL) and 2-phenylphenol (PP). They were linked by a modified porphyrin (Por), a sophisticated structure in the plant photosynthetic system. The lignin nanoparticles were investigated by various spectroscopic techniques (i.e., heteronuclear single quantum correlation HSQC-NMR, photoluminescence spectroscopy and time-resolved transient state spectroscopy) to characterize the structural and photochemical properties. This green biosensor showed superior harnessing abilities for excited state proton transfer (ESPT) photochemical dynamics of the grafted PP moieties. Lignin provided a stable microenvironment in broad pH ranges (pH 2 to 9) and various anion environments by forming a lignin nanosphere to encapsulate the excited PP moieties, offering a nano-buffering effect on these moieties via the intimate hydrogen bond networking interactions with the functional groups substituted on the lignin backbone. Moreover, AL-Por-PP demonstrated an outstanding selectivity of fluorescence responses to an essential index of asthma and lung cancer, bisulfite ions, in the concentration range of 1 to 20 μM (R2 = 0.99) which extends to live cell imaging. This study offers a sustainable and promising approach for extending the functionalities of lignin and highlights the prospects of valorizing lignin and plant extracts for biomass-based molecular device development and applications.
- Open Access
- 7 April 2020
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 24 (5) , 1424-1429
Enhancement of Elemental Sulfur Recovery from Wastewater Biogas Using Nickel (II)-(5,10,15,20)-tetrakis-phenylcarboxylporphyrin
- 7 April 2020
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 24 (5) , 1424-1429
Open AccessEnhancement of Elemental Sulfur Recovery from Wastewater Biogas Using Nickel (II)-(5,10,15,20)-tetrakis-phenylcarboxylporphyrin
- 24 April 2019
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 21 (10) , 2788-2800
Diol pretreatment to fractionate a reactive lignin in lignocellulosic biomass biorefineries
Lignin-first fractionation has become a new biorefinery target to obtain valuable lignin monomers toward the complete utilization of lignocellulosic biomass, but increasing delignification through conventional pretreatment approaches often affects the structural integrity of the dissociated lignin. We discovered a new reactive lignin with a great solvent solubility and preserved β-O-4 linkages from eucalyptus after a modified organosolv pretreatment using 1,4-butanediol (1,4-BDO). Unlike conventional organosolv pretreatment using ethanol, lignin deposition was not observed in 1,4-BDO pretreatment. Meanwhile, 2D HSQC NMR analysis revealed that the residual lignin obtained from 1,4-BDO pretreated eucalypts contained a relatively higher amount of β-O-4 interunit linkages, indicating its higher integrity than ethanol pretreated lignin. This result agreed with the lower content of phenolic hydroxyl groups in dissolved lignin via31P NMR analysis. With increasing pretreatment severity, the amount of aliphatic hydroxyl groups decreased in ethanol pretreated lignin while it remained at a higher level in 1,4-BDO pretreated lignin. These results suggested that 1,4-BDO quenched the benzyl carbocation intermediate and formed ether linkages with a hydroxyl tail at the α position of the lignin. Solubility tests revealed that grafting aliphatic hydroxyl groups on 1,4-BDO lignin increased its dissolution. This phenomenon was further demonstrated for four different diols with similar structures. In addition, more than 90% cellulose conversion was obtained for all the diol pretreated eucalyptus after 48 h of enzymatic hydrolysis with cellulase at a loading of 7.5 FPU per gram of glucan. Diol pretreatment thus offers a promising reaction pathway to coincide with three pillars of biorefinery for lignin fractionation, lignin structural integrity, and cellulose hydrolysis.
- 24 April 2019
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 21 (10) , 2788-2800
Diol pretreatment to fractionate a reactive lignin in lignocellulosic biomass biorefineries
Lignin-first fractionation has become a new biorefinery target to obtain valuable lignin monomers toward the complete utilization of lignocellulosic biomass, but increasing delignification through conventional pretreatment approaches often affects the structural integrity of the dissociated lignin. We discovered a new reactive lignin with a great solvent solubility and preserved β-O-4 linkages from eucalyptus after a modified organosolv pretreatment using 1,4-butanediol (1,4-BDO). Unlike conventional organosolv pretreatment using ethanol, lignin deposition was not observed in 1,4-BDO pretreatment. Meanwhile, 2D HSQC NMR analysis revealed that the residual lignin obtained from 1,4-BDO pretreated eucalypts contained a relatively higher amount of β-O-4 interunit linkages, indicating its higher integrity than ethanol pretreated lignin. This result agreed with the lower content of phenolic hydroxyl groups in dissolved lignin via31P NMR analysis. With increasing pretreatment severity, the amount of aliphatic hydroxyl groups decreased in ethanol pretreated lignin while it remained at a higher level in 1,4-BDO pretreated lignin. These results suggested that 1,4-BDO quenched the benzyl carbocation intermediate and formed ether linkages with a hydroxyl tail at the α position of the lignin. Solubility tests revealed that grafting aliphatic hydroxyl groups on 1,4-BDO lignin increased its dissolution. This phenomenon was further demonstrated for four different diols with similar structures. In addition, more than 90% cellulose conversion was obtained for all the diol pretreated eucalyptus after 48 h of enzymatic hydrolysis with cellulase at a loading of 7.5 FPU per gram of glucan. Diol pretreatment thus offers a promising reaction pathway to coincide with three pillars of biorefinery for lignin fractionation, lignin structural integrity, and cellulose hydrolysis.
- 10 December 2018
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 21 (6) , 1319-1329
Development of a waste-derived lignin-porphyrin bio-polymer with enhanced photoluminescence at high water fraction with wide pH range and heavy metal sensitivity investigations
Lignin is a common by-product of pulping industries. Diverse functional groups in the polymeric matrix make lignin a superior alternative for carbon-based materials. Meanwhile, porphyrin family is well known in multiple applications; however, aggregation-caused quenching (AQC) due to the strong π–π interaction in poor-solvent environments will limit the photoluminescence intensity of porphyrin. In this study, a new lignin-porphyrin (AL–CTPP) polymer was developed, which combined and promoted the functionalities of the two chemicals. In photoluminescence investigations, the emission intensity of AL–CTPP in the 600 to 780 nm region was 30-fold stronger than that of porphyrin alone when the water fraction (fw) > 0.9. Lignin served as a stable backbone immobilizing porphyrin and prevented unwanted aggregation of porphyrin and the related aggregation-caused quenching in high fw solution at various pH. Furthermore, linear correlations were established between absorption properties of AL–CTPP with concentrations of five metal ions (i.e., Mn2+, Ni2+, Co2+, Cu2+, and Zn2+). With these unique features, AL–CTPP showed enhanced performance for potential bio-imaging and environmental applications. Lignin-porphyrin polymers may represent a significant potential product of biorefineries and the effective utilization of lignin to fabricate a new functional material which offers significant benefits to support waste valorization.
- 10 December 2018
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 21 (6) , 1319-1329
Development of a waste-derived lignin-porphyrin bio-polymer with enhanced photoluminescence at high water fraction with wide pH range and heavy metal sensitivity investigations
Lignin is a common by-product of pulping industries. Diverse functional groups in the polymeric matrix make lignin a superior alternative for carbon-based materials. Meanwhile, porphyrin family is well known in multiple applications; however, aggregation-caused quenching (AQC) due to the strong π–π interaction in poor-solvent environments will limit the photoluminescence intensity of porphyrin. In this study, a new lignin-porphyrin (AL–CTPP) polymer was developed, which combined and promoted the functionalities of the two chemicals. In photoluminescence investigations, the emission intensity of AL–CTPP in the 600 to 780 nm region was 30-fold stronger than that of porphyrin alone when the water fraction (fw) > 0.9. Lignin served as a stable backbone immobilizing porphyrin and prevented unwanted aggregation of porphyrin and the related aggregation-caused quenching in high fw solution at various pH. Furthermore, linear correlations were established between absorption properties of AL–CTPP with concentrations of five metal ions (i.e., Mn2+, Ni2+, Co2+, Cu2+, and Zn2+). With these unique features, AL–CTPP showed enhanced performance for potential bio-imaging and environmental applications. Lignin-porphyrin polymers may represent a significant potential product of biorefineries and the effective utilization of lignin to fabricate a new functional material which offers significant benefits to support waste valorization.