Yatish Patel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yatish Patel has a total of 117 co-authors. Here are the top co-authors by number of shared publications:
- Gregory James Offer
Department of Mechanical Engineering, Imperial College London
13 shared publications - Alastair Hales
Department of Mechanical Engineering, Imperial College London, London SW7 2AZ, United Kingdom
8 shared publications - Yan Zhao
Department of Mechanical Engineering, Imperial College London, London SW7 2AZ, United Kingdom
6 shared publications - Laura Bravo Diaz
Department of Mechanical Engineering, Imperial College London, London SW7 2AZ, United Kingdom
5 shared publications Gregory J. Offer
4 shared publicationsMonica Marinescu
4 shared publications
Latest Publications
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (3) , 403
Entropic Profiles for Accurate Thermal Modelling of Lithium-Ion Batteries
Accurate thermal modeling is key to designing more reliable cells and packs, as thermal gradients are responsible for current inhomogeneities that accelerate cell degradation. To achieve this, thermal models need to factor in the heat generated inside the battery cell, the intrinsic thermal properties of the cell, and the cell’s ability to exchange heat with the environment. While irreversible heat generation is due to ohmic losses, entropic potential data is necessary to model the reversible component of the heat generated in the cell. Thus, the accuracy of heat generation predictions can be improved by incorporating high-quality entropic profiles into thermal models. Measuring entropic profiles is time-consuming. Entropic profiles of single electrodes are particularly scarce in literature, and full-cell profiles are often sampled at too wide intervals. Another limitation of entropic profiles measured on full cells is that they are not unique to a given chemistry but depend instead on the electrode balancing of that specific cell. Therefore, there is a need for high-fidelity entropic profiles of typical individual electrodes. In this work, we present a collection of high-fidelity entropic potential data for a range of eight materials typically used in lithium-ion electrodes at BoL. We then show that by combining a given anode and cathode, the entropic potential of the resulting full cell can be re-constructed from its constituent electrodes as a function of electrode balancing. The data is validated with measurements from a bespoke set of single-layer pouch cells and multi-layer pouch cells. The technique is useful for making predictions of how the reversible component of heat generation will change with electrode slippage as the cell degrades. This is consequential, because changes in electrode balancing, whether intentional (e.g., for performance optimization) or as a result of electrode degradation, can significantly alter the entropic profile of the full cell and, consequently, its thermal behavior.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (3) , 403
Entropic Profiles for Accurate Thermal Modelling of Lithium-Ion Batteries
Accurate thermal modeling is key to designing more reliable cells and packs, as thermal gradients are responsible for current inhomogeneities that accelerate cell degradation. To achieve this, thermal models need to factor in the heat generated inside the battery cell, the intrinsic thermal properties of the cell, and the cell’s ability to exchange heat with the environment. While irreversible heat generation is due to ohmic losses, entropic potential data is necessary to model the reversible component of the heat generated in the cell. Thus, the accuracy of heat generation predictions can be improved by incorporating high-quality entropic profiles into thermal models. Measuring entropic profiles is time-consuming. Entropic profiles of single electrodes are particularly scarce in literature, and full-cell profiles are often sampled at too wide intervals. Another limitation of entropic profiles measured on full cells is that they are not unique to a given chemistry but depend instead on the electrode balancing of that specific cell. Therefore, there is a need for high-fidelity entropic profiles of typical individual electrodes. In this work, we present a collection of high-fidelity entropic potential data for a range of eight materials typically used in lithium-ion electrodes at BoL. We then show that by combining a given anode and cathode, the entropic potential of the resulting full cell can be re-constructed from its constituent electrodes as a function of electrode balancing. The data is validated with measurements from a bespoke set of single-layer pouch cells and multi-layer pouch cells. The technique is useful for making predictions of how the reversible component of heat generation will change with electrode slippage as the cell degrades. This is consequential, because changes in electrode balancing, whether intentional (e.g., for performance optimization) or as a result of electrode degradation, can significantly alter the entropic profile of the full cell and, consequently, its thermal behavior.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (4) , 660
Ultrasonic Frequency Response Dynamics of Multilayered Batteries: Mechanical Modeling and in-Operando Applications
Batteries, particularly lithium-ion batteries, are essential for electronic devices, electric vehicles, and aerospace applications. However, manufacturing defects and operational degradations pose significant safety and reliability risks. Ultrasound has become widely recognized as a non-destructive method for assessing battery states and structures. Nevertheless, the current understanding of wave-battery interaction dynamics still depends on trial-and-error results, lacking insight into the general ultrasonic response characteristics and their evolution across different operational conditions and cell chemistries. In this work, we present a unified framework to model, predict, and analyze the generalized frequency response characteristics of ultrasound during battery testing in the pulse-echo configuration. Using forward modeling and swept frequency analysis, we describe the generalized frequency responses and wave structure characteristics of multilayered battery systems and clarify the physical relationship between reflection modulations and internal battery substructures. We then propose a physics-guided state evaluation method to investigate changes in mechanical dynamics induced by variations in electrochemical state, enabling a substructure-resolved mapping of state-of-charge heterogeneity across the inspection surface and through the battery's thickness. We further demonstrate the advantages of our method in terms of state response sensitivity, structural resolvability, and robustness through comparative studies with state-of-the-art methods across various batteries. By providing a foundational understanding of the wave physics and generalized ultrasonic tools, this work aims to facilitate standardized, high-throughput ultrasonic evaluation of batteries throughout in-lab, post-manufacture and in-service phases of a battery's life.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (4) , 660
Ultrasonic Frequency Response Dynamics of Multilayered Batteries: Mechanical Modeling and in-Operando Applications
Batteries, particularly lithium-ion batteries, are essential for electronic devices, electric vehicles, and aerospace applications. However, manufacturing defects and operational degradations pose significant safety and reliability risks. Ultrasound has become widely recognized as a non-destructive method for assessing battery states and structures. Nevertheless, the current understanding of wave-battery interaction dynamics still depends on trial-and-error results, lacking insight into the general ultrasonic response characteristics and their evolution across different operational conditions and cell chemistries. In this work, we present a unified framework to model, predict, and analyze the generalized frequency response characteristics of ultrasound during battery testing in the pulse-echo configuration. Using forward modeling and swept frequency analysis, we describe the generalized frequency responses and wave structure characteristics of multilayered battery systems and clarify the physical relationship between reflection modulations and internal battery substructures. We then propose a physics-guided state evaluation method to investigate changes in mechanical dynamics induced by variations in electrochemical state, enabling a substructure-resolved mapping of state-of-charge heterogeneity across the inspection surface and through the battery's thickness. We further demonstrate the advantages of our method in terms of state response sensitivity, structural resolvability, and robustness through comparative studies with state-of-the-art methods across various batteries. By providing a foundational understanding of the wave physics and generalized ultrasonic tools, this work aims to facilitate standardized, high-throughput ultrasonic evaluation of batteries throughout in-lab, post-manufacture and in-service phases of a battery's life.
- Open Access
- 23 September 2025
- Published by Elsevier in Energy Storage Materials
- Vol. 82
Decoding coupled mechanical–electrochemical responses in multi-layer batteries via generalized ultrasonic dynamics
- 23 September 2025
- Published by Elsevier in Energy Storage Materials
- Vol. 82
Open AccessDecoding coupled mechanical–electrochemical responses in multi-layer batteries via generalized ultrasonic dynamics
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (5) , 642
Extensive Degradation Analysis of Commercial Lithium-Ion 21700 Cylindrical Cells Under Representative Operational Conditions
Extensive research on high-energy Lithium-Ion batteries (heLIBs) has been conducted in recent years, driven by unprecedented demands from the electric vehicle market. A significant share of the already-commercialized and close-to-be-commercialized batteries in that category use NCA, Ni-rich NMC, and SiGr composites as electrode chemistries, all of which present a range of degradation mechanisms that hinder heLIBs development and prevent them from keeping pace with the increasing demand. Their precise detection and understanding are thus essential for improving batteries’ performance and extending their life cycle, placing aging studies among the most explored topics in the battery community. However, little attention has been given to how relevant the operational conditions are to real application. In general, research studies apply constant current discharge profiles, do not employ active cooling processes and overlook battery connections and thermal behaviour during cycling. Meanwhile, real battery usage includes power usage, complex drive cycles, regenerative braking and active cooling. Here, we present a series of aging studies at cell level conducted under close-to-real conditions to associate operational parameters to the commonly associated degradation modes (DM), such as loss of Li inventory, loss of active material and resistance increase. For this, 14 sets of commercial BAK53 21700 cylindrical cells were cycled in thermal chambers, with active base cooling, tab welded connections and thermal surveillance at the bottom, middle and top of the cell can. The sets cycled under different operational parameters, with each one differing by a single operational parameter (temperature, regenerative braking rate, charge and discharge power) from a reference protocol baseline, that followed a synthetic simplified drive cycle (SSDC). The SSDC was derived from the UKBC drive cycle profile for buses, converting speed to power and, for a more realistic comparison, the discharge was limited by an energy criteria, simulating a fixed bus journey. Analysis was based on the evolution of cells resistance, temperature and energy/capacity relations during many stages of the degradation, with the degradation modes assignment being based on pOCV analysis of the cell and its electrodes’ half-cells pOCVs. Both incremental capacity analysis and differential voltage analysis were implemented in the process to assist in the pOCV analysis. This work is part of the BESTBUS project and used the PyProBe Python battery analysis package for the DM analysis (Holland T, Cummins D, Marinescu M. PyProBE: Python Processing for Battery Experiments. Submitted.[MM1] https://github.com/ImperialCollegeLondon/PyProBE). Figure 1
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (5) , 642
Extensive Degradation Analysis of Commercial Lithium-Ion 21700 Cylindrical Cells Under Representative Operational Conditions
Extensive research on high-energy Lithium-Ion batteries (heLIBs) has been conducted in recent years, driven by unprecedented demands from the electric vehicle market. A significant share of the already-commercialized and close-to-be-commercialized batteries in that category use NCA, Ni-rich NMC, and SiGr composites as electrode chemistries, all of which present a range of degradation mechanisms that hinder heLIBs development and prevent them from keeping pace with the increasing demand. Their precise detection and understanding are thus essential for improving batteries’ performance and extending their life cycle, placing aging studies among the most explored topics in the battery community. However, little attention has been given to how relevant the operational conditions are to real application. In general, research studies apply constant current discharge profiles, do not employ active cooling processes and overlook battery connections and thermal behaviour during cycling. Meanwhile, real battery usage includes power usage, complex drive cycles, regenerative braking and active cooling. Here, we present a series of aging studies at cell level conducted under close-to-real conditions to associate operational parameters to the commonly associated degradation modes (DM), such as loss of Li inventory, loss of active material and resistance increase. For this, 14 sets of commercial BAK53 21700 cylindrical cells were cycled in thermal chambers, with active base cooling, tab welded connections and thermal surveillance at the bottom, middle and top of the cell can. The sets cycled under different operational parameters, with each one differing by a single operational parameter (temperature, regenerative braking rate, charge and discharge power) from a reference protocol baseline, that followed a synthetic simplified drive cycle (SSDC). The SSDC was derived from the UKBC drive cycle profile for buses, converting speed to power and, for a more realistic comparison, the discharge was limited by an energy criteria, simulating a fixed bus journey. Analysis was based on the evolution of cells resistance, temperature and energy/capacity relations during many stages of the degradation, with the degradation modes assignment being based on pOCV analysis of the cell and its electrodes’ half-cells pOCVs. Both incremental capacity analysis and differential voltage analysis were implemented in the process to assist in the pOCV analysis. This work is part of the BESTBUS project and used the PyProBe Python battery analysis package for the DM analysis (Holland T, Cummins D, Marinescu M. PyProBE: Python Processing for Battery Experiments. Submitted.[MM1] https://github.com/ImperialCollegeLondon/PyProBE). Figure 1
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (9) , 3119
Predicting Cell Lifetime through Degradation Mode Analysis
Traditional quantification of cell degradation as “capacity loss” represents a simple and well-established means to estimate the lifetime of a cell. This singular parameter is unable to capture the combination of complex degradation mechanisms working beneath the surface. Physics based models are developed to accurately simulate these interactions and requires correspondingly numerous parameters. Degradation Mode Analysis (DMA) has been used in this work as it combines the simplicity similar to capacity fade whilst capturing different degradation modes, namely, Loss of Active Material on the positive electrode (LAMpe), Loss of Active Material on the negative electrode (LAMne) and Loss of Lithium Inventory (LLI). DMA has been well described in (Dubarry et al., 2012). A set of experiments have been designed where cells are tested under various conditions with the aim of accelerating certain degradation modes. The results demonstrates that the magnitude and rate of degradation modes can be extracted. Cells exhibiting similar rates of degradation modes experienced less capacity fade compared to those with diverging degradation mode rates (i.e. LAMne is much greater than LAMpe). This is incorporated into a path dependent aging model to predict the lifetime, given expected cell operating conditions.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (9) , 3119
Predicting Cell Lifetime through Degradation Mode Analysis
Traditional quantification of cell degradation as “capacity loss” represents a simple and well-established means to estimate the lifetime of a cell. This singular parameter is unable to capture the combination of complex degradation mechanisms working beneath the surface. Physics based models are developed to accurately simulate these interactions and requires correspondingly numerous parameters. Degradation Mode Analysis (DMA) has been used in this work as it combines the simplicity similar to capacity fade whilst capturing different degradation modes, namely, Loss of Active Material on the positive electrode (LAMpe), Loss of Active Material on the negative electrode (LAMne) and Loss of Lithium Inventory (LLI). DMA has been well described in (Dubarry et al., 2012). A set of experiments have been designed where cells are tested under various conditions with the aim of accelerating certain degradation modes. The results demonstrates that the magnitude and rate of degradation modes can be extracted. Cells exhibiting similar rates of degradation modes experienced less capacity fade compared to those with diverging degradation mode rates (i.e. LAMne is much greater than LAMpe). This is incorporated into a path dependent aging model to predict the lifetime, given expected cell operating conditions.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (8) , 810
(Invited) The Effect of Test Conditions on the Relative Performance of Cylindrical Lithium-Ion Cells at Beginning of Life and Beyond
The quickest and simplest way to benchmark cells against one another is through the comparison of datasheets and rapid standardised testing of cells. However, typical datasheets provide information based on cells tested under constant current load profiles in controlled ambient temperature. These test conditions are unrepresentative of most real applications. This work selects and benchmarks six 21700 cylindrical cells under four different test categories and two cooling conditions, to determine if relative performance of cells at beginning of life translates from standardised current and thermal conditions to more realistic currents and conditions. [1] The lifetime performance of cells is often of even greater importance for battery pack design. Despite the fact that test conditions are demonstrated to be of extreme importance to lithium-ion cell testing at beginning of life, degradation studies are typically performed under standard cooling conditions and constant current loads. To study this effect, two types of cells are cycled under multiple combinations of application-oriented cycles and three relevant cooling systems (base, side and convection cooling). Two high performance 21700 cylindrical cells are chosen based on their chemistry similarities and internal structure differences: the Samsung 50S and the Molicel P45B. For beginning of life, cells were tested under two cooling strategies (natural convection and base cooling) and four different types of loads (constant current discharge, constant C-rate discharge, high-rate constant C-rate cycling, and a simplified set of drive cycles. While it is well understood that beginning-of-life performance, characterised by cell usable capacity and maximum surface temperatures/gradients, changes significantly across the different cooling and load types, the percentile-based ranking analysis performed in this study illustrates that the cells change their ranking compared to one another depending on these conditions. Differences in cooling are shown to affect ranking by up to 20%, and differences in load type can affect ranking by up to 98%. (Figure 1a) This means that some cells perform better under one combination of cooling and load type, and others perform better under a different combination. Importantly, this suggests that the assumption that the cell that performs best in standardised conditions will perform best under the real application, is false. For assessing the life performance, a cut-off of 80% SOH, based on remaining available capacity assessed at C/10, is used for comparison. (Figure 1b) Under the reference slow charge slow discharge cycle, the cooling made little difference to the cycle life of the cells. Fast charging is shown to be very detrimental to life, accelerating the anode degradation and the occurrence of a “knee point”. Lithium plating is identified from cell teardowns as the cause of the knee point, with its occurrence likely increased by deterioration of the anode structure. The cooler surface temperatures of side cooling were correlated to lower cycle life compared to base cooling, under the fast charge slow discharge cycle. Surprisingly, fast discharge was shown to significantly improve life performance, which was identified to be due to preventing utilisation of low SOCs, thus likely reducing silicon (anode) degradation. Here the cooler temperatures of side cooling significantly improve life performance compared to base cooling, which is seen for both fast and slow charge combinations with fast discharge. Via disassembly and differential voltage analysis, part of this improvement is shown to be due to reduced cathode degradation. This work is most impactful to battery pack engineers and manufacturers, as well as researchers running cell level testing for pack applications or models. This work helps stress the importance of running bespoke, relevant testing to choose the best cell and generate more application-relevant cell-level results. W.J. Marzook, J. Eaton, M.A. Samieian, Y. Patel, G.J. Offer, M. Marinescu, The effect of test conditions on the relative performance of cylindrical lithium-ion cells, J. Energy Storage, 105 (2025), 114485, https://doi.org/10.1016/j.est.2024.114485. Figure 1: (a) Thermal rank vs capacity rank for the six cylindrical cells tested. The range of each cell is shown by a coloured cloud: light blue for P42A, purple for VTC6A-AM, green for VTC6A, dark blue for M50T, yellow for T48P and red for 48X. The display includes the results of eight experiments: 1C discharge, 5A discharge, 1C charge – 2C discharge cycle and a drive cycle (4.9A mean), each under both natural convection and base cooling. (b) Energy throughput to reach 80% SOH (based on available capacity), for all cell, rate, and cooling combinations. The yellow markers also display the resistance increase when 80% SOH was reached (right axis). Error bars display the variance amongst the three repeats. Figure 1
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (8) , 810
(Invited) The Effect of Test Conditions on the Relative Performance of Cylindrical Lithium-Ion Cells at Beginning of Life and Beyond
The quickest and simplest way to benchmark cells against one another is through the comparison of datasheets and rapid standardised testing of cells. However, typical datasheets provide information based on cells tested under constant current load profiles in controlled ambient temperature. These test conditions are unrepresentative of most real applications. This work selects and benchmarks six 21700 cylindrical cells under four different test categories and two cooling conditions, to determine if relative performance of cells at beginning of life translates from standardised current and thermal conditions to more realistic currents and conditions. [1] The lifetime performance of cells is often of even greater importance for battery pack design. Despite the fact that test conditions are demonstrated to be of extreme importance to lithium-ion cell testing at beginning of life, degradation studies are typically performed under standard cooling conditions and constant current loads. To study this effect, two types of cells are cycled under multiple combinations of application-oriented cycles and three relevant cooling systems (base, side and convection cooling). Two high performance 21700 cylindrical cells are chosen based on their chemistry similarities and internal structure differences: the Samsung 50S and the Molicel P45B. For beginning of life, cells were tested under two cooling strategies (natural convection and base cooling) and four different types of loads (constant current discharge, constant C-rate discharge, high-rate constant C-rate cycling, and a simplified set of drive cycles. While it is well understood that beginning-of-life performance, characterised by cell usable capacity and maximum surface temperatures/gradients, changes significantly across the different cooling and load types, the percentile-based ranking analysis performed in this study illustrates that the cells change their ranking compared to one another depending on these conditions. Differences in cooling are shown to affect ranking by up to 20%, and differences in load type can affect ranking by up to 98%. (Figure 1a) This means that some cells perform better under one combination of cooling and load type, and others perform better under a different combination. Importantly, this suggests that the assumption that the cell that performs best in standardised conditions will perform best under the real application, is false. For assessing the life performance, a cut-off of 80% SOH, based on remaining available capacity assessed at C/10, is used for comparison. (Figure 1b) Under the reference slow charge slow discharge cycle, the cooling made little difference to the cycle life of the cells. Fast charging is shown to be very detrimental to life, accelerating the anode degradation and the occurrence of a “knee point”. Lithium plating is identified from cell teardowns as the cause of the knee point, with its occurrence likely increased by deterioration of the anode structure. The cooler surface temperatures of side cooling were correlated to lower cycle life compared to base cooling, under the fast charge slow discharge cycle. Surprisingly, fast discharge was shown to significantly improve life performance, which was identified to be due to preventing utilisation of low SOCs, thus likely reducing silicon (anode) degradation. Here the cooler temperatures of side cooling significantly improve life performance compared to base cooling, which is seen for both fast and slow charge combinations with fast discharge. Via disassembly and differential voltage analysis, part of this improvement is shown to be due to reduced cathode degradation. This work is most impactful to battery pack engineers and manufacturers, as well as researchers running cell level testing for pack applications or models. This work helps stress the importance of running bespoke, relevant testing to choose the best cell and generate more application-relevant cell-level results. W.J. Marzook, J. Eaton, M.A. Samieian, Y. Patel, G.J. Offer, M. Marinescu, The effect of test conditions on the relative performance of cylindrical lithium-ion cells, J. Energy Storage, 105 (2025), 114485, https://doi.org/10.1016/j.est.2024.114485. Figure 1: (a) Thermal rank vs capacity rank for the six cylindrical cells tested. The range of each cell is shown by a coloured cloud: light blue for P42A, purple for VTC6A-AM, green for VTC6A, dark blue for M50T, yellow for T48P and red for 48X. The display includes the results of eight experiments: 1C discharge, 5A discharge, 1C charge – 2C discharge cycle and a drive cycle (4.9A mean), each under both natural convection and base cooling. (b) Energy throughput to reach 80% SOH (based on available capacity), for all cell, rate, and cooling combinations. The yellow markers also display the resistance increase when 80% SOH was reached (right axis). Error bars display the variance amongst the three repeats. Figure 1
- Open Access
- 24 April 2024
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 12, 1414996
Corrigendum: Lithium-ion battery second life: pathways, challenges and outlook
Corrigendum: Lithium-ion battery second life: pathways, challenges and outlook
- 24 April 2024
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 12, 1414996
Open AccessCorrigendum: Lithium-ion battery second life: pathways, challenges and outlook
Corrigendum: Lithium-ion battery second life: pathways, challenges and outlook
- Open Access
- 8 April 2024
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 12, 1358417
Lithium-ion battery second life: pathways, challenges and outlook
Net zero targets have resulted in a drive to decarbonise the transport sector worldwide through electrification. This has, in turn, led to an exponentially growing battery market and, conversely, increasing attention on how we can reduce the environmental impact of batteries and promote a more efficient circular economy to achieve real net zero. As these batteries reach the end of their first life, challenges arise as to how to collect and process them, in order to maximise their economical use before finally being recycled. Despite the growing body of work around this topic, the decision-making process on which pathways batteries could take is not yet well understood, and clear policies and standards to support implementation of processes and infrastructure are still lacking. Requirements and challenges behind recycling and second life applications are complex and continue being defined in industry and academia. Both pathways rely on cell collection, selection and processing, and are confronted with the complexities of pack disassembly, as well as a diversity of cell chemistries, state-of-health, size, and form factor. There are several opportunities to address these barriers, such as standardisation of battery design and reviewing the criteria for a battery’s end-of-life. These revisions could potentially improve the overall sustainability of batteries, but may require policies to drive such transformation across the industry. The influence of policies in triggering a pattern of behaviour that favours one pathway over another are examined and suggestions are made for policy amendments that could support a second life pipeline, while encouraging the development of an efficient recycling industry. This review explains the different pathways that end-of-life EV batteries could follow, either immediate recycling or service in one of a variety of second life applications, before eventual recycling. The challenges and barriers to each pathway are discussed, taking into account their relative environmental and economic feasibility and competing advantages and disadvantages of each. The review identifies key areas where processes need to be simplified and decision criteria clearly defined, so that optimal pathways can be rapidly determined for each end-of-life battery.
- 8 April 2024
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 12, 1358417
Open AccessLithium-ion battery second life: pathways, challenges and outlook
Net zero targets have resulted in a drive to decarbonise the transport sector worldwide through electrification. This has, in turn, led to an exponentially growing battery market and, conversely, increasing attention on how we can reduce the environmental impact of batteries and promote a more efficient circular economy to achieve real net zero. As these batteries reach the end of their first life, challenges arise as to how to collect and process them, in order to maximise their economical use before finally being recycled. Despite the growing body of work around this topic, the decision-making process on which pathways batteries could take is not yet well understood, and clear policies and standards to support implementation of processes and infrastructure are still lacking. Requirements and challenges behind recycling and second life applications are complex and continue being defined in industry and academia. Both pathways rely on cell collection, selection and processing, and are confronted with the complexities of pack disassembly, as well as a diversity of cell chemistries, state-of-health, size, and form factor. There are several opportunities to address these barriers, such as standardisation of battery design and reviewing the criteria for a battery’s end-of-life. These revisions could potentially improve the overall sustainability of batteries, but may require policies to drive such transformation across the industry. The influence of policies in triggering a pattern of behaviour that favours one pathway over another are examined and suggestions are made for policy amendments that could support a second life pipeline, while encouraging the development of an efficient recycling industry. This review explains the different pathways that end-of-life EV batteries could follow, either immediate recycling or service in one of a variety of second life applications, before eventual recycling. The challenges and barriers to each pathway are discussed, taking into account their relative environmental and economic feasibility and competing advantages and disadvantages of each. The review identifies key areas where processes need to be simplified and decision criteria clearly defined, so that optimal pathways can be rapidly determined for each end-of-life battery.
- Open Access
- 5 April 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 603
Lithium-ion battery degradation: Comprehensive cycle ageing data and analysis for commercial 21700 cells
- 5 April 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 603
Open AccessLithium-ion battery degradation: Comprehensive cycle ageing data and analysis for commercial 21700 cells
- 1 January 2023
- Published by The American Society for Nondestructive Testing, Inc.
Ultrasonic Resonance Method for Quantifying Layered Structure in Lithium-Ion Batteries
Accurately characterizing the internal states of lithium-ion batteries (LIBs) is crucial for ensuring optimal performance, durability, and safety. Despite the growing interest in battery research, this task remains challenging. Here we present a novel method using ultrasonic resonance to quantitatively characterize the layered structure of LIBs. The method employs simple, conventional ultrasound equipment to experimentally acquire resonant signals, and a new physical model to retrieve crucial information about the battery inner structures. This method has been successfully deployed to recover the number of repetitive layers, average thicknesses of anode and cathode active layers, spatially resolved image of internal layers, and the state of charge with layer-to-layer resolutions. Compared to existing ultrasonic techniques, this method offers improved layer-resolved characterization capacities while maintaining low-cost, in-operando operation. This makes it a powerful tool for battery inner structure characterization and management, enabling better quality control during production and quantitative monitoring of the states of health and charge during operation.
- 1 January 2023
- Published by The American Society for Nondestructive Testing, Inc.
Ultrasonic Resonance Method for Quantifying Layered Structure in Lithium-Ion Batteries
Accurately characterizing the internal states of lithium-ion batteries (LIBs) is crucial for ensuring optimal performance, durability, and safety. Despite the growing interest in battery research, this task remains challenging. Here we present a novel method using ultrasonic resonance to quantitatively characterize the layered structure of LIBs. The method employs simple, conventional ultrasound equipment to experimentally acquire resonant signals, and a new physical model to retrieve crucial information about the battery inner structures. This method has been successfully deployed to recover the number of repetitive layers, average thicknesses of anode and cathode active layers, spatially resolved image of internal layers, and the state of charge with layer-to-layer resolutions. Compared to existing ultrasonic techniques, this method offers improved layer-resolved characterization capacities while maintaining low-cost, in-operando operation. This makes it a powerful tool for battery inner structure characterization and management, enabling better quality control during production and quantitative monitoring of the states of health and charge during operation.