Rosaura Castrillón-Mendoza
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rosaura Castrillón-Mendoza has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Francisco Javier Rey Martinez
Department of Energy and Fluid Mechanics, Engineering School (EII), University of Valladolid (UVa), 47002 Valladolid, Spain
4 shared publications - Javier María Rey Hernandez
GIRTER Research Group, Consolidated Research Unit (UIC053) of Castile and Leon, 47002 Valladolid, Spain
4 shared publications - Enrique Ciro Quispe
Grupo de Investigación en Energías (GIEN), Universidad Autónoma de Occidente, Cali 760030, Colombia
2 shared publications - Eloy Velasco-Gómez
Universidad de Valladolid
1 shared publication - Gabriel González-Palomino
Universidad Autonoma de Occidente
1 shared publication Jenny Ibarguen
Facultad de Ingeniería Universidad Autónoma de Occidente, Colombia
1 shared publication
Latest Publications
- Open Access
Energy Management Systems in Higher Education Institutions’ Buildings
This study reviews the methods used to implement energy management systems (EnMS) in higher education institutions (HEIs) and their impact on improving energy performance considering their relationship with the requirements for an EnMS according to ISO 50001. From 2310 articles, 136 articles and 5 technical reports related to EnMS and energy efficiency were selected and analyzed. A synthesis of the major actions taken by HEIs to enhance their energy performance is presented, including energy management strategies, methods for measuring and estimating consumption, occupant behavior models that influence energy use, barriers to energy efficiency in HEIs buildings, and future challenges. It was found that studies on building energy management systems often do not incorporate an analysis of CO2 emissions reduction. Funding for this research is driven by directives and policies related to energy performance. These results should assist HEIs seeking to implement an EnMS to improve their energy performance and reduce CO2 emissions, thereby contributing to energy security, climate change mitigation, and fostering a new culture of energy use and consumption. It was also found that, although most studies do not explicitly mention the ISO 50001 standard, all of them comply with at least one of its requirements. Additionally, 27% of energy management strategies focus on operational aspects, while 26% involve energy audits, primarily through measurement, estimation, forecasting, energy reviews, and the establishment of an energy baseline (EnBL).
Open AccessEnergy Management Systems in Higher Education Institutions’ Buildings
This study reviews the methods used to implement energy management systems (EnMS) in higher education institutions (HEIs) and their impact on improving energy performance considering their relationship with the requirements for an EnMS according to ISO 50001. From 2310 articles, 136 articles and 5 technical reports related to EnMS and energy efficiency were selected and analyzed. A synthesis of the major actions taken by HEIs to enhance their energy performance is presented, including energy management strategies, methods for measuring and estimating consumption, occupant behavior models that influence energy use, barriers to energy efficiency in HEIs buildings, and future challenges. It was found that studies on building energy management systems often do not incorporate an analysis of CO2 emissions reduction. Funding for this research is driven by directives and policies related to energy performance. These results should assist HEIs seeking to implement an EnMS to improve their energy performance and reduce CO2 emissions, thereby contributing to energy security, climate change mitigation, and fostering a new culture of energy use and consumption. It was also found that, although most studies do not explicitly mention the ISO 50001 standard, all of them comply with at least one of its requirements. Additionally, 27% of energy management strategies focus on operational aspects, while 26% involve energy audits, primarily through measurement, estimation, forecasting, energy reviews, and the establishment of an energy baseline (EnBL).
- Open Access
- 15 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (20) , 9403
Sustainable Building Tool by Energy Baseline: Case Study
This study explores innovative methodologies for estimating the energy baseline (EnBL) of a university classroom building, emphasizing the critical roles of data quality and model selection in achieving accurate energy efficiency assessments. We compare time series models that are suitable for buildings with limited consumption data with univariate and multivariate regression models that incorporate additional variables, such as weather and occupancy. Furthermore, we investigate the advantages of dynamic simulation using the EnergyPlus engine (V5, USDOE United States) and Design Builder software v7, enabling scenario analysis for various operational conditions. Through a comprehensive case study at the UAO University Campus, we validate our models using daily monitoring data and statistical analysis in RStudio. Our findings reveal that model choice significantly influences energy consumption forecasts, leading to potential overestimations or underestimations of savings. By rigorously assessing statistical validation and error analysis results, we highlight the implications for decarbonization strategies in building design and operation. This research provides a valuable framework for selecting appropriate methodologies for energy baseline estimation, enhancing transparency and reliability in energy performance assessments. These contributions are particularly relevant for optimizing energy use and aligning with regulatory requirements in the pursuit of sustainable building practices.
- 15 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (20) , 9403
Open AccessSustainable Building Tool by Energy Baseline: Case Study
This study explores innovative methodologies for estimating the energy baseline (EnBL) of a university classroom building, emphasizing the critical roles of data quality and model selection in achieving accurate energy efficiency assessments. We compare time series models that are suitable for buildings with limited consumption data with univariate and multivariate regression models that incorporate additional variables, such as weather and occupancy. Furthermore, we investigate the advantages of dynamic simulation using the EnergyPlus engine (V5, USDOE United States) and Design Builder software v7, enabling scenario analysis for various operational conditions. Through a comprehensive case study at the UAO University Campus, we validate our models using daily monitoring data and statistical analysis in RStudio. Our findings reveal that model choice significantly influences energy consumption forecasts, leading to potential overestimations or underestimations of savings. By rigorously assessing statistical validation and error analysis results, we highlight the implications for decarbonization strategies in building design and operation. This research provides a valuable framework for selecting appropriate methodologies for energy baseline estimation, enhancing transparency and reliability in energy performance assessments. These contributions are particularly relevant for optimizing energy use and aligning with regulatory requirements in the pursuit of sustainable building practices.
- Open Access
- 15 January 2024
- Published by EconJournals in International Journal of Energy Economics and Policy
- Vol. 14 (1) , 224-244
ISO 50002 and ITS Contribution to the Decarbonization of SMES: Case Study
The decarbonization of all sectors of the energy system is essential to mitigate climate change. However, the existing barriers, mainly related to information, prevent the implementation of Energy Efficiency measures and energy management systems in SMEs to reduce carbon emissions. An energy audit is considered a critical step for businesses that want to increase their energy efficiency and reduce energy consumption cost-effectively. The present study addressed ISO 50002 and its contribution to energy management based on the ISO 50001:2019 standard through a case study applied to an SME in the non-metallic mineral sector, which allowed establishing the guidelines and the form to address an energy audit in an SME under ISO 50002, determining opportunities for improvement by eliminating unproductive times, correcting fleeting compressed air, eliminating energy losses due to operational variability, automating the start-up of the Hammer Mill and the feed band in gypsum grinding. Additionally, an annual energy and economic savings potential of 162,599 KWh and COP 49,360,442 was estimated; and 26,992 Kg CO2 stopped emitting.
- 15 January 2024
- Published by EconJournals in International Journal of Energy Economics and Policy
- Vol. 14 (1) , 224-244
Open AccessISO 50002 and ITS Contribution to the Decarbonization of SMES: Case Study
The decarbonization of all sectors of the energy system is essential to mitigate climate change. However, the existing barriers, mainly related to information, prevent the implementation of Energy Efficiency measures and energy management systems in SMEs to reduce carbon emissions. An energy audit is considered a critical step for businesses that want to increase their energy efficiency and reduce energy consumption cost-effectively. The present study addressed ISO 50002 and its contribution to energy management based on the ISO 50001:2019 standard through a case study applied to an SME in the non-metallic mineral sector, which allowed establishing the guidelines and the form to address an energy audit in an SME under ISO 50002, determining opportunities for improvement by eliminating unproductive times, correcting fleeting compressed air, eliminating energy losses due to operational variability, automating the start-up of the Hammer Mill and the feed band in gypsum grinding. Additionally, an annual energy and economic savings potential of 162,599 KWh and COP 49,360,442 was estimated; and 26,992 Kg CO2 stopped emitting.
- Open Access
- 7 November 2020
- Published by MDPI AG in Electronics
- Vol. 9 (11) , 1874
PV Energy Performance in a Sustainable Campus
The challenge of photovoltaic integration as the basis of an energy generation system has been achieved and carried out by the University Autónoma de Cali, Colombia, using an avant-garde energy technology model. This innovative sustainable campus not only fulfills its purpose as an advanced model of a renewable energy integration system, it also aims at environmental research, e-mobility, and energy efficiency. This paper describes how the university implements the technological innovation of integrating the photovoltaic system installation in a university campus, showing its relevant contribution to the electricity generation in the campus buildings by analyzing the different electrical parameters together with the system performance indicators. The implementation of technological solutions has allowed the generation of a quantity of renewable energy within the campus, supplying a sustainable energy response based on energy efficiency and carbon emissions savings. This innovation has been applied following the international standards for the evaluation of the energy performance of photovoltaic systems (IEC 61724), reaching very optimal values for this type of renewable solution. In this paper, the dynamic monitoring of several parameters has been carried out in order to analyze the energy performance, and an energy simulation has been used to achieve optimal solutions and to obtain the perfect modeling of the system. This study shows how to evaluate the performance of an integration of a photovoltaic system in a smart university campus, according to international standards. It achieves complete viability due to its economic savings, energy efficiency and reduction of carbon emission.
- 7 November 2020
- Published by MDPI AG in Electronics
- Vol. 9 (11) , 1874
Open AccessPV Energy Performance in a Sustainable Campus
The challenge of photovoltaic integration as the basis of an energy generation system has been achieved and carried out by the University Autónoma de Cali, Colombia, using an avant-garde energy technology model. This innovative sustainable campus not only fulfills its purpose as an advanced model of a renewable energy integration system, it also aims at environmental research, e-mobility, and energy efficiency. This paper describes how the university implements the technological innovation of integrating the photovoltaic system installation in a university campus, showing its relevant contribution to the electricity generation in the campus buildings by analyzing the different electrical parameters together with the system performance indicators. The implementation of technological solutions has allowed the generation of a quantity of renewable energy within the campus, supplying a sustainable energy response based on energy efficiency and carbon emissions savings. This innovation has been applied following the international standards for the evaluation of the energy performance of photovoltaic systems (IEC 61724), reaching very optimal values for this type of renewable solution. In this paper, the dynamic monitoring of several parameters has been carried out in order to analyze the energy performance, and an energy simulation has been used to achieve optimal solutions and to obtain the perfect modeling of the system. This study shows how to evaluate the performance of an integration of a photovoltaic system in a smart university campus, according to international standards. It achieves complete viability due to its economic savings, energy efficiency and reduction of carbon emission.
- Open Access
Identification of Technoeconomic Opportunities with the Use of Premium Efficiency Motors as Alternative for Developing Countries
More than 65% of electricity consumed worldwide by the industrial sector is used in electric-motor-driven systems. For this reason, the efficiency of electric motors is an important factor in improving the energy efficiency of the industry. Additionally, this contributes to reducing energy consumption, production costs, as well as CO2eq emissions. The replacement of motors with efficiency class IE1 by motors of efficiency class IE3 is one possible alternative to increase the efficiency of electric motor systems. When a program to replace motors with others of greater efficiency is initiated, it is necessary to casuistically evaluate all identified opportunities. Economic viability can be evaluated using a variety of methods. Often, the methods recommended by manufacturers or consulting entities focus on simple payback time without accounting for all influencing factors. This paper contributes to the academic discussion by proposing a methodology based on the calculation of energy-saving potential, by performing a preliminary an a priori evaluation and determining the economic opportunities. It avoids evaluating all motors in the studied facility and shows its effectiveness by using the cost of energy saved to distinguish which motors to evaluate. Finally, it provides a complete economic evaluation of the final decision on the basis of discounted cash flow methods. A short-production-cycle sugarcane industry was used in the case study.
Open AccessIdentification of Technoeconomic Opportunities with the Use of Premium Efficiency Motors as Alternative for Developing Countries
More than 65% of electricity consumed worldwide by the industrial sector is used in electric-motor-driven systems. For this reason, the efficiency of electric motors is an important factor in improving the energy efficiency of the industry. Additionally, this contributes to reducing energy consumption, production costs, as well as CO2eq emissions. The replacement of motors with efficiency class IE1 by motors of efficiency class IE3 is one possible alternative to increase the efficiency of electric motor systems. When a program to replace motors with others of greater efficiency is initiated, it is necessary to casuistically evaluate all identified opportunities. Economic viability can be evaluated using a variety of methods. Often, the methods recommended by manufacturers or consulting entities focus on simple payback time without accounting for all influencing factors. This paper contributes to the academic discussion by proposing a methodology based on the calculation of energy-saving potential, by performing a preliminary an a priori evaluation and determining the economic opportunities. It avoids evaluating all motors in the studied facility and shows its effectiveness by using the cost of energy saved to distinguish which motors to evaluate. Finally, it provides a complete economic evaluation of the final decision on the basis of discounted cash flow methods. A short-production-cycle sugarcane industry was used in the case study.
- Open Access
- 4 March 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (5) , 1960
Industrial Decarbonization by a New Energy-Baseline Methodology. Case Study
The main target of climate change policies in the majority of industrialized countries is to reduce energy consumption in their facilities, which would reduce the carbon emissions that are generated. Through this idea, energy management plans are developed, energy reduction targets are established, and energy-efficient technologies are applied to achieve high energy savings, which are environmentally compatible. In order to evaluate the impact of their operations and investments, companies promote measures of performance in their energy management plans. An integral part of measuring energy performance is the establishment of energy baselines applicable to the complete facility that provide a basis for evaluating energy efficiency improvements and incorporating energy performance indicators. The implementation of energy management systems in accordance with the requirements of ISO Standard 50001 is a contribution to the aim and strategies for improving cleaner production in industries. This involves an option for the industry to establish energy benchmarks to evaluate performance, predict energy consumption, and align production with the lowest possible consumption of primary and secondary forms of energy. Ultimately, this goal should lead to the manufacturing of cleaner products that are environmentally friendly, energy efficient, and are in accordance with the global environmental targets of cleaner manufacturing. This paper discusses an alternative for establishing energy baselines for the industrial sector in which several products are produced from a single raw material, and we determined the energy consumption of each product and its impact on the overall efficiency of the industry at the same time. The method is applied to the plastic injection process and the result is an energy baseline (EBL) in accordance with the requirements of ISO 50001, which serves as a reference for determining energy savings. The EBL facilitates a reduction in energy consumption and greenhouse gas emissions in sectors such as plastics, a sector which accounts for 15% of Colombia’s manufacturing GDP.
- 4 March 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (5) , 1960
Open AccessIndustrial Decarbonization by a New Energy-Baseline Methodology. Case Study
The main target of climate change policies in the majority of industrialized countries is to reduce energy consumption in their facilities, which would reduce the carbon emissions that are generated. Through this idea, energy management plans are developed, energy reduction targets are established, and energy-efficient technologies are applied to achieve high energy savings, which are environmentally compatible. In order to evaluate the impact of their operations and investments, companies promote measures of performance in their energy management plans. An integral part of measuring energy performance is the establishment of energy baselines applicable to the complete facility that provide a basis for evaluating energy efficiency improvements and incorporating energy performance indicators. The implementation of energy management systems in accordance with the requirements of ISO Standard 50001 is a contribution to the aim and strategies for improving cleaner production in industries. This involves an option for the industry to establish energy benchmarks to evaluate performance, predict energy consumption, and align production with the lowest possible consumption of primary and secondary forms of energy. Ultimately, this goal should lead to the manufacturing of cleaner products that are environmentally friendly, energy efficient, and are in accordance with the global environmental targets of cleaner manufacturing. This paper discusses an alternative for establishing energy baselines for the industrial sector in which several products are produced from a single raw material, and we determined the energy consumption of each product and its impact on the overall efficiency of the industry at the same time. The method is applied to the plastic injection process and the result is an energy baseline (EBL) in accordance with the requirements of ISO 50001, which serves as a reference for determining energy savings. The EBL facilitates a reduction in energy consumption and greenhouse gas emissions in sectors such as plastics, a sector which accounts for 15% of Colombia’s manufacturing GDP.
- Open Access
Analysis of the Methodology to Obtain Several Key Indicators Performance (KIP), by Energy Retrofitting of the Actual Building to the District Heating Fuelled by Biomass, Focusing on nZEB Goal: Case of Study
In order to achieve the objectives of the European 20/20/20 strategy, and to obtain a greater energy efficiency, integration of renewable energies and the reduction of carbon emissions, a District Heating (DH) system has been designed by the University of Valladolid (UVa), Spain, one of the most important DH fed by biomass fuel in Spain, supplying heating and domestic hot water (DHW) to 31 buildings in Valladolid, the majority of them, educational buildings on the University Campus. The aims of this paper were to study the change from an energy system fueled by natural gas to District Heating by biomass in a building on the campus of the University of Valladolid—the School of Engineering (EII)—studying its consumption from its connection to the District Heating system. An energy management methodology such as ISO 50001 is carried out, applied to efficiency systems in buildings, thus establishing new criteria of sustainability and economic value. In this paper, energy management will also be analyzed in accordance with the proposed tools of an Energy Management System (EMS) applied to the EII building, through the measurement of energy parameters, calculation of thermal consumption, thermal energy savings as a result of the change from system to District Heating by biomass, economic savings, reduction of environmental impact and indicators of thermal efficiency I100 and CUSUM indicator. Finally, the primary renewable and non-renewable energy efficiency indicators for the new District Heating system will be determined. The concept of the near Zero Energy Buildings is defined in the European Union (EU) in order to analyze an approach to an nZEB which results from replacing the natural gas heating system by a biomass District Heating system.
Open AccessAnalysis of the Methodology to Obtain Several Key Indicators Performance (KIP), by Energy Retrofitting of the Actual Building to the District Heating Fuelled by Biomass, Focusing on nZEB Goal: Case of Study
In order to achieve the objectives of the European 20/20/20 strategy, and to obtain a greater energy efficiency, integration of renewable energies and the reduction of carbon emissions, a District Heating (DH) system has been designed by the University of Valladolid (UVa), Spain, one of the most important DH fed by biomass fuel in Spain, supplying heating and domestic hot water (DHW) to 31 buildings in Valladolid, the majority of them, educational buildings on the University Campus. The aims of this paper were to study the change from an energy system fueled by natural gas to District Heating by biomass in a building on the campus of the University of Valladolid—the School of Engineering (EII)—studying its consumption from its connection to the District Heating system. An energy management methodology such as ISO 50001 is carried out, applied to efficiency systems in buildings, thus establishing new criteria of sustainability and economic value. In this paper, energy management will also be analyzed in accordance with the proposed tools of an Energy Management System (EMS) applied to the EII building, through the measurement of energy parameters, calculation of thermal consumption, thermal energy savings as a result of the change from system to District Heating by biomass, economic savings, reduction of environmental impact and indicators of thermal efficiency I100 and CUSUM indicator. Finally, the primary renewable and non-renewable energy efficiency indicators for the new District Heating system will be determined. The concept of the near Zero Energy Buildings is defined in the European Union (EU) in order to analyze an approach to an nZEB which results from replacing the natural gas heating system by a biomass District Heating system.