Guan-Tao Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Guan-Tao Chen has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Yong-Chang Jiao
Xidian University
7 shared publications - Gang Zhao
National Key Laboratory of Antennas and Microwave Technology, xidian university, Xian, China
6 shared publications - Chuan-Wei Luo
National Key Laboratory of Antennas and Microwave Technology Xidian University Xi'an China
4 shared publications - Chi Zhang
National Key Laboratory of Antennas and Microwave Technology, Xidian University, Xi’an, China
1 shared publication Gang Zhao
National Laboratory of Antennas and Microwave Technology, Xidian University, Xi'an 710071, China
1 shared publication- He Xu
National Key Laboratory of Antennas and Microwave Technology Xidian University Xi'an China
1 shared publication
Latest Publications
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (3) , 566-570
A Wideband 1-Bit Reconfigurable Reflectarray Antenna at Ku-Band
In this letter, a wideband high-efficiency 1-bit 16 × 16 reconfigurable reflectarray antenna (RRA) is proposed. First, a wideband and low loss 1-bit RRA element is designed. It consists of double-layer patches printed on two dielectric substrates, respectively, forming a multiresonant behavior to expand the bandwidth.Due to the relatively thin thickness of the double-layer dielectric substrate (0.05 λ 0 ), the element has low reflection loss. Therefore, the high efficiency and wide bandwidth performances can be obtained simultaneously. The phase difference between the two states of the RRA element is stable within 180 ± 20° in the frequency range of 12.9–16.5 GHz. Based on the broadband RRA element, a 16 × 16 RRA was fabricated and measured. Tested results show that the proposed RRA achieves 22.5% of 1 dB gain bandwidth and 25% of maximum aperture efficiency.
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (3) , 566-570
A Wideband 1-Bit Reconfigurable Reflectarray Antenna at Ku-Band
In this letter, a wideband high-efficiency 1-bit 16 × 16 reconfigurable reflectarray antenna (RRA) is proposed. First, a wideband and low loss 1-bit RRA element is designed. It consists of double-layer patches printed on two dielectric substrates, respectively, forming a multiresonant behavior to expand the bandwidth.Due to the relatively thin thickness of the double-layer dielectric substrate (0.05 λ 0 ), the element has low reflection loss. Therefore, the high efficiency and wide bandwidth performances can be obtained simultaneously. The phase difference between the two states of the RRA element is stable within 180 ± 20° in the frequency range of 12.9–16.5 GHz. Based on the broadband RRA element, a 16 × 16 RRA was fabricated and measured. Tested results show that the proposed RRA achieves 22.5% of 1 dB gain bandwidth and 25% of maximum aperture efficiency.
- 16 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (10) , 6988-6993
Design of Wideband High-Efficiency Circularly Polarized Folded Reflectarray Antenna
This communication presents a wideband high-efficiency circularly polarized (CP) folded reflectarray antenna (FRA) based on the CP selective surface (CPSS). The proposed CPFRA is comprised of a simple CPSS on the top layer, a wideband reflectarray plane on the bottom layer, and a wideband planar CP antenna as the primary source. First, the simple CPSS based on the traditional Pierrot structure is designed. The CPSS can reflect one CP wave, while it can transmit its orthogonal CP wave. Then, a subwavelength element is used to design the wideband reflectarray, and a wideband planar CP microstrip patch array is selected as the feed. According to the ray tracing principle, the distance between the upper CPSS and the bottom planar reflectarray is reduced to half of the distance between the planar reflectarray and the imaginary feed approximately. At last, we design a wideband high-efficiency CPFRA. Measured results of the fabricated prototype reveal that its maximum gain at 10 GHz is 27.8 dBic, its 3 dB gain bandwidth is 15%, its 3 dB axial-ratio (AR) bandwidth is 23%, and its maximum aperture efficiency is about 45.4%. Good broadband and low-profile characteristics make the proposed CPFRA have potential value in some wireless communication system.
- 16 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (10) , 6988-6993
Design of Wideband High-Efficiency Circularly Polarized Folded Reflectarray Antenna
This communication presents a wideband high-efficiency circularly polarized (CP) folded reflectarray antenna (FRA) based on the CP selective surface (CPSS). The proposed CPFRA is comprised of a simple CPSS on the top layer, a wideband reflectarray plane on the bottom layer, and a wideband planar CP antenna as the primary source. First, the simple CPSS based on the traditional Pierrot structure is designed. The CPSS can reflect one CP wave, while it can transmit its orthogonal CP wave. Then, a subwavelength element is used to design the wideband reflectarray, and a wideband planar CP microstrip patch array is selected as the feed. According to the ray tracing principle, the distance between the upper CPSS and the bottom planar reflectarray is reduced to half of the distance between the planar reflectarray and the imaginary feed approximately. At last, we design a wideband high-efficiency CPFRA. Measured results of the fabricated prototype reveal that its maximum gain at 10 GHz is 27.8 dBic, its 3 dB gain bandwidth is 15%, its 3 dB axial-ratio (AR) bandwidth is 23%, and its maximum aperture efficiency is about 45.4%. Good broadband and low-profile characteristics make the proposed CPFRA have potential value in some wireless communication system.
- 5 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (11) , 7900-7905
Hemispheric Conformal Wide Beamwidth Circularly Polarized Antenna Based on Two Pairs of Curved Orthogonal Dipoles in Space
A wide axial-ratio beamwidth (ARBW) and half-power beamwidth (HPBW) circularly polarized (CP) antenna is realized by arranging two curved patch dipole pairs orthogonally in a cruciform contour that conforms with a hemispheric shell. First, two orthogonal curved dipole pairs are designed via step-by-step investigation of the evolution of traditional crossed dipoles. Then, an antenna with a wide CP working bandwidth and wide ARBWs and HPBWs is developed by enlarging the diameter of the curved arms, replacing the narrow arms with the wide patches and making these patches conformal with the shell surface; this improves the impedance bandwidth (IBW) and further reduces the antenna’s size. Finally, a prototype with reduced dimensions of $0.52\times 0.52\times0.15$ ( $\lambda _{0}^{3}$ ) is designed, fabricated, and measured. The resulting antenna exhibits a −10 dB IBW of 55.8% (1.06–1.89 GHz) and a 3 dB AR bandwidth of 70.9% (1–2.1 GHz), within which the ARBW and HPBW reach maximum values of 202°/196° and 113°/111° in the two orthogonal principal planes at 1.602 and 1.268 GHz, respectively. Furthermore, a 3 dB ARBW exceeding 100°, an HPBW exceeding 96°, and efficiency exceeding 60% are acquired within the 1.252–1.89 GHz (40.6%) target service coverage band.
- 5 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (11) , 7900-7905
Hemispheric Conformal Wide Beamwidth Circularly Polarized Antenna Based on Two Pairs of Curved Orthogonal Dipoles in Space
A wide axial-ratio beamwidth (ARBW) and half-power beamwidth (HPBW) circularly polarized (CP) antenna is realized by arranging two curved patch dipole pairs orthogonally in a cruciform contour that conforms with a hemispheric shell. First, two orthogonal curved dipole pairs are designed via step-by-step investigation of the evolution of traditional crossed dipoles. Then, an antenna with a wide CP working bandwidth and wide ARBWs and HPBWs is developed by enlarging the diameter of the curved arms, replacing the narrow arms with the wide patches and making these patches conformal with the shell surface; this improves the impedance bandwidth (IBW) and further reduces the antenna’s size. Finally, a prototype with reduced dimensions of $0.52\times 0.52\times0.15$ ( $\lambda _{0}^{3}$ ) is designed, fabricated, and measured. The resulting antenna exhibits a −10 dB IBW of 55.8% (1.06–1.89 GHz) and a 3 dB AR bandwidth of 70.9% (1–2.1 GHz), within which the ARBW and HPBW reach maximum values of 202°/196° and 113°/111° in the two orthogonal principal planes at 1.602 and 1.268 GHz, respectively. Furthermore, a 3 dB ARBW exceeding 100°, an HPBW exceeding 96°, and efficiency exceeding 60% are acquired within the 1.252–1.89 GHz (40.6%) target service coverage band.
- 3 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (5) , 798-802
Wideband 1 bit Reconfigurable Transmitarray Antenna Based on Polarization Rotation Element
In this letter, a broadband 1 bit reconfigurable transmitarray antenna (RTA) based on polarization rotation element is proposed. The transmitarray element is composed of two split circular rings connected by two narrow strips and sandwiched by two orthogonal polarizers. As phase shift and polarization conversion structure, the two patches are separated by the air layer, and the p-i-n diodes are soldered in the center of the narrow strips. The polarizer grids are used as dc bias lines to conduct p-i-n diodes. By controlling the p-i-n diodes in the on and off states, the polarization orientation of the wave emitted by the RTA element is changed. Then, the outgoing waves in the two states physically form a broadband 180° phase difference, which broadens the operating bandwidth of the RTA effectively. By utilizing the novel unit cell, a 16 × 16 elements RTA is designed, fabricated, and measured. The measured results show that the 3 dB and 1 dB gain bandwidths are 45% and 17%, respectively. The peak gain is 16.8 dBi with aperture efficiency of 18.4%. Furthermore, the proposed RTA has good beam scanning performance with 2-D scanning range of ±40°.
- 3 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (5) , 798-802
Wideband 1 bit Reconfigurable Transmitarray Antenna Based on Polarization Rotation Element
In this letter, a broadband 1 bit reconfigurable transmitarray antenna (RTA) based on polarization rotation element is proposed. The transmitarray element is composed of two split circular rings connected by two narrow strips and sandwiched by two orthogonal polarizers. As phase shift and polarization conversion structure, the two patches are separated by the air layer, and the p-i-n diodes are soldered in the center of the narrow strips. The polarizer grids are used as dc bias lines to conduct p-i-n diodes. By controlling the p-i-n diodes in the on and off states, the polarization orientation of the wave emitted by the RTA element is changed. Then, the outgoing waves in the two states physically form a broadband 180° phase difference, which broadens the operating bandwidth of the RTA effectively. By utilizing the novel unit cell, a 16 × 16 elements RTA is designed, fabricated, and measured. The measured results show that the 3 dB and 1 dB gain bandwidths are 45% and 17%, respectively. The peak gain is 16.8 dBi with aperture efficiency of 18.4%. Furthermore, the proposed RTA has good beam scanning performance with 2-D scanning range of ±40°.
- Open Access
- 3 February 2021
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (4) , e22566
Novel low‐profile dual‐band and dual‐polarization Fabry‐Pérot resonator antenna
- 3 February 2021
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (4) , e22566
Open AccessNovel low‐profile dual‐band and dual‐polarization Fabry‐Pérot resonator antenna
- 6 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 58 (8) , 5602-5611
An Approach to High Frame Rate Radar Imaging Through Electronically Displaced-Phase-Center Antenna
This article presents a novel radar imaging approach through an electronically displaced-phase-center antenna (eDPCA). In this approach, a reflectarray is used to directly scan a beam across a parabolic reflector, where the antenna phase center is displaced electronically. The proposed eDPCA-based imaging radar can provide a very high frame rate and does not depend on the motion between the target and the radar platform. The feasibility of the eDPCA-based imaging radar is investigated and validated through a designed example eDPCA at 157 GHz and the simulation experiments for a point target and a complex target, respectively. The effects of practical impairments such as errors in phase centers and position-dependent fluctuations in antenna patterns on the imaging quality are examined. Furthermore, by applying the precompensation method suggested in this article, the imaging procedure could be performed by using classic synthetic aperture radar (SAR) algorithms.
- 6 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 58 (8) , 5602-5611
An Approach to High Frame Rate Radar Imaging Through Electronically Displaced-Phase-Center Antenna
This article presents a novel radar imaging approach through an electronically displaced-phase-center antenna (eDPCA). In this approach, a reflectarray is used to directly scan a beam across a parabolic reflector, where the antenna phase center is displaced electronically. The proposed eDPCA-based imaging radar can provide a very high frame rate and does not depend on the motion between the target and the radar platform. The feasibility of the eDPCA-based imaging radar is investigated and validated through a designed example eDPCA at 157 GHz and the simulation experiments for a point target and a complex target, respectively. The effects of practical impairments such as errors in phase centers and position-dependent fluctuations in antenna patterns on the imaging quality are examined. Furthermore, by applying the precompensation method suggested in this article, the imaging procedure could be performed by using classic synthetic aperture radar (SAR) algorithms.
- 1 January 2020
- Published by Zhejiang University Press in Frontiers of Information Technology & Electronic Engineering
- Vol. 21 (1) , 159-173
Optimal design of a large dual-polarization microstrip reflectarray with China-coverage patterns for satellite communications
A large dual-polarization microstrip reflectarray with China-coverage patterns in two operating bands is designed. To sufficiently compensate for the spati
- 1 January 2020
- Published by Zhejiang University Press in Frontiers of Information Technology & Electronic Engineering
- Vol. 21 (1) , 159-173
Optimal design of a large dual-polarization microstrip reflectarray with China-coverage patterns for satellite communications
A large dual-polarization microstrip reflectarray with China-coverage patterns in two operating bands is designed. To sufficiently compensate for the spati
- 1 January 2020
- Published by Elsevier in Optical Fiber Technology
- Vol. 54, 102112
Double helix microfiber coupler enhances refractive index sensing based on Vernier effect
- 1 January 2020
- Published by Elsevier in Optical Fiber Technology
- Vol. 54, 102112
Double helix microfiber coupler enhances refractive index sensing based on Vernier effect
- 6 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 18 (1) , 182-186
A Reflectarray for Generating Wideband Circularly Polarized Orbital Angular Momentum Vortex Wave
A reflectarray for generating wideband circularly polarized (CP) orbital angular momentum (OAM) vortex wave in X band is proposed. First, a dual-linearly-polarized element consisting of two rhombus-shaped metal patches etched on two dielectric substrates is designed. The element has high isolations between two polarizations and preferable linear phase responses in wide frequency band. Then, the phase distribution of the reflectarray carrying the OAM vortex wave with mode l=1 is designed, and dimensions of the elements are determined by their reflective phases. The far-field radiation patterns and near-field phase distributions are simulated to verify the proposed design. Finally, prototype of a 313-element reflectarray with a linearly polarized (LP) Vivaldi feed, which converts an incident LP wave into a reflective CP wave, is fabricated and measured. The results of measurement indicate that the reflectarray can generate CP OAM vortex wave with mode l=1 in 9-11 GHz band (a fractional bandwidth of 20%). The reflectarray also achieves 20% 1-dB gain bandwidth, and its peak gain is 19.9 dB at 11 GHz. Except for a very narrow band (10.9-11.1 GHz), its measured 3-dB axial ratio (AR) bandwidth is about 40%.
- 6 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 18 (1) , 182-186
A Reflectarray for Generating Wideband Circularly Polarized Orbital Angular Momentum Vortex Wave
A reflectarray for generating wideband circularly polarized (CP) orbital angular momentum (OAM) vortex wave in X band is proposed. First, a dual-linearly-polarized element consisting of two rhombus-shaped metal patches etched on two dielectric substrates is designed. The element has high isolations between two polarizations and preferable linear phase responses in wide frequency band. Then, the phase distribution of the reflectarray carrying the OAM vortex wave with mode l=1 is designed, and dimensions of the elements are determined by their reflective phases. The far-field radiation patterns and near-field phase distributions are simulated to verify the proposed design. Finally, prototype of a 313-element reflectarray with a linearly polarized (LP) Vivaldi feed, which converts an incident LP wave into a reflective CP wave, is fabricated and measured. The results of measurement indicate that the reflectarray can generate CP OAM vortex wave with mode l=1 in 9-11 GHz band (a fractional bandwidth of 20%). The reflectarray also achieves 20% 1-dB gain bandwidth, and its peak gain is 19.9 dB at 11 GHz. Except for a very narrow band (10.9-11.1 GHz), its measured 3-dB axial ratio (AR) bandwidth is about 40%.