Federico Cova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Federico Cova has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Maria Valeria Blanco
Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway
11 shared publications - Pedro Alonso-Sánchez
Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza, Zaragoza 50009, Spain
6 shared publications - Ann Mari Svensson
Department of Materials Science and Engineering Norwegian University of Science and Technology Trondheim Norway
4 shared publications - Javier Campo
Instituto de Nanociencia y Materiales de Aragón
4 shared publications - Kesavan Thangaian
Department of Materials Science and Engineering, Norwegian University of Science and Technology, Trondheim, NO-7491, Norway
4 shared publications - Per Erik Vullum
Department of Materials and Nanotechnology SINTEF Industry Trondheim Norway
4 shared publications
Latest Publications
- Open Access
- 5 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (44) , 30039-30051
Low-temperature synthesis of silicon anodes from biosilica via AlCl 3 -assisted magnesiothermic reduction
Silicon is a promising anode material for high energy density Li-ion batteries, AlCl 3 enables its production from bioprecursors at low temperatures.
- 5 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (44) , 30039-30051
Open AccessLow-temperature synthesis of silicon anodes from biosilica via AlCl 3 -assisted magnesiothermic reduction
Silicon is a promising anode material for high energy density Li-ion batteries, AlCl 3 enables its production from bioprecursors at low temperatures.
- Open Access
- 30 March 2026
- Published by Elsevier in Journal of Energy Storage
- Vol. 159
Time-resolved analysis of extensive silicon amorphization in SiGr anodes for Li-Ion batteries via operando synchrotron X-ray diffraction
- 30 March 2026
- Published by Elsevier in Journal of Energy Storage
- Vol. 159
Open AccessTime-resolved analysis of extensive silicon amorphization in SiGr anodes for Li-Ion batteries via operando synchrotron X-ray diffraction
- Open Access
- 1 January 2026
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 33 (1) , 207-217
FaXToR: the hard X-ray micro-tomography beamline at the Spanish synchrotron ALBA
FaXToR is the first hard X-ray imaging beamline built and commissioned at the Spanish synchrotron light source ALBA, and therefore the start of user operation marks the introduction of a new imaging user community to the facility. FaXToR has pushed the implementation of a multi-scale, multimodal approach to investigate the morpho-structural changes of a number of materials within a range of applications, including biomedicine, material science, cultural heritage and paleontology. In this work, we describe the FaXToR beamline optical layout and the beam properties and we provide details on the flexible in-house design of the endstation. Beamline commissioning results are presented as well. Finally, an overview of its main applications is provided, defining the main strategic program the beamline will develop during its lifetime.
- 1 January 2026
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 33 (1) , 207-217
Open AccessFaXToR: the hard X-ray micro-tomography beamline at the Spanish synchrotron ALBA
FaXToR is the first hard X-ray imaging beamline built and commissioned at the Spanish synchrotron light source ALBA, and therefore the start of user operation marks the introduction of a new imaging user community to the facility. FaXToR has pushed the implementation of a multi-scale, multimodal approach to investigate the morpho-structural changes of a number of materials within a range of applications, including biomedicine, material science, cultural heritage and paleontology. In this work, we describe the FaXToR beamline optical layout and the beam properties and we provide details on the flexible in-house design of the endstation. Beamline commissioning results are presented as well. Finally, an overview of its main applications is provided, defining the main strategic program the beamline will develop during its lifetime.
- Open Access
- 12 November 2025
- Published by Wiley in Advanced Materials Interfaces
- Vol. 12 (22)
Improving the Cycling Stability of SiO 2 Anodes for Li‐ion Batteries by Controlling Solid Electrolyte Interphase Chemistry and Structure
Silicon‐based negative electrodes are essential for next‐generation high‐capacity Li‐ion batteries, with SiO 2 emerging as a promising and sustainable option. However, SiO 2 anodes have limited cycling stability, which can be improved by tailoring the solid electrolyte interphase (SEI) through electrolyte engineering. This study investigates the effects of LiPF 6 and LiFSI electrolyte salts, along with fluoroethylene carbonate (FEC) and vinylene carbonate (VC) additives, on the performance of SiO 2 anodes. Galvanostatic cycling and electrochemical impedance spectroscopy (EIS) are combined with SEI composition analysis using Ar + ‐sputtered X‐ray photoelectron spectroscopy and hard X‐ray synchrotron photoelectron spectroscopy at different photon energies. The results show that FEC enhances capacity retention, while VC improves long‐term stability at the expense of lower initial capacity. No synergistic benefits are observed from combination of both additives. LiFSI‐based electrolytes deliver high initial capacities but suffer capacity fade over cycling, whereas additive‐free LiPF 6 formulations lead to poor cycling stability due to the formation of a thick and resistive SEI layer. In contrast, LiFSI promotes a thinner and more inorganic‐rich SEI. Both FEC and VC lead to the formation of a poly(VC) surface layer that enhances capacity retention. The FEC‐derived layer, enriched with LiF and thinner in nature, exhibits improved SEI stability. These findings provide valuable insights for designing electrolytes to improve the cycling performance of SiO 2 anodes.
- 12 November 2025
- Published by Wiley in Advanced Materials Interfaces
- Vol. 12 (22)
Open AccessImproving the Cycling Stability of SiO 2 Anodes for Li‐ion Batteries by Controlling Solid Electrolyte Interphase Chemistry and Structure
Silicon‐based negative electrodes are essential for next‐generation high‐capacity Li‐ion batteries, with SiO 2 emerging as a promising and sustainable option. However, SiO 2 anodes have limited cycling stability, which can be improved by tailoring the solid electrolyte interphase (SEI) through electrolyte engineering. This study investigates the effects of LiPF 6 and LiFSI electrolyte salts, along with fluoroethylene carbonate (FEC) and vinylene carbonate (VC) additives, on the performance of SiO 2 anodes. Galvanostatic cycling and electrochemical impedance spectroscopy (EIS) are combined with SEI composition analysis using Ar + ‐sputtered X‐ray photoelectron spectroscopy and hard X‐ray synchrotron photoelectron spectroscopy at different photon energies. The results show that FEC enhances capacity retention, while VC improves long‐term stability at the expense of lower initial capacity. No synergistic benefits are observed from combination of both additives. LiFSI‐based electrolytes deliver high initial capacities but suffer capacity fade over cycling, whereas additive‐free LiPF 6 formulations lead to poor cycling stability due to the formation of a thick and resistive SEI layer. In contrast, LiFSI promotes a thinner and more inorganic‐rich SEI. Both FEC and VC lead to the formation of a poly(VC) surface layer that enhances capacity retention. The FEC‐derived layer, enriched with LiF and thinner in nature, exhibits improved SEI stability. These findings provide valuable insights for designing electrolytes to improve the cycling performance of SiO 2 anodes.
- Open Access
Mitigating Silicon Amorphization in Si–Gr Anodes: A Pathway to Stable, High‐Energy Density Anodes for Li‐Ion Batteries
Silicon–Graphite (SiGr) blended anodes represent a promising approach for enhancing the energy density of commercial Li‐ion batteries (LIBs). However, the ≈300% volume change of the silicon component during lithiation and delithiation induces significant mechanical stress, leading to particle cracking and pulverization that compromise electrode stability. This study presents the first evidence of controlled Si lithiation in Si‐rich blended anodes, where a crystalline silicon (c‐Si) core remains unreacted while the outer shell undergoes complete amorphization. Operando synchrotron X‐ray diffraction analysis of SiGr anodes over five consecutive cycles reveals a reversible lithiation of c‐Si, which was not previously reported. Complementary transmission electron microscopy (TEM) analysis of focused ion beam (FIB)‐prepared lamellae from cycled electrodes confirms the formation of an amorphous shell and preservation of the c‐Si core. These findings validate the feasibility of a partial lithiation strategy for SiGr anodes and provide unprecedented insights for the design of mechanically stable electrodes. Additionally, the interpretation of lithiation/delithiation differential capacity plots is discussed in light of the observed structural evolution, offering both fundamental and practical advancements for the development of robust SiGr anodes for high‐energy‐density LIBs.
Open AccessMitigating Silicon Amorphization in Si–Gr Anodes: A Pathway to Stable, High‐Energy Density Anodes for Li‐Ion Batteries
Silicon–Graphite (SiGr) blended anodes represent a promising approach for enhancing the energy density of commercial Li‐ion batteries (LIBs). However, the ≈300% volume change of the silicon component during lithiation and delithiation induces significant mechanical stress, leading to particle cracking and pulverization that compromise electrode stability. This study presents the first evidence of controlled Si lithiation in Si‐rich blended anodes, where a crystalline silicon (c‐Si) core remains unreacted while the outer shell undergoes complete amorphization. Operando synchrotron X‐ray diffraction analysis of SiGr anodes over five consecutive cycles reveals a reversible lithiation of c‐Si, which was not previously reported. Complementary transmission electron microscopy (TEM) analysis of focused ion beam (FIB)‐prepared lamellae from cycled electrodes confirms the formation of an amorphous shell and preservation of the c‐Si core. These findings validate the feasibility of a partial lithiation strategy for SiGr anodes and provide unprecedented insights for the design of mechanically stable electrodes. Additionally, the interpretation of lithiation/delithiation differential capacity plots is discussed in light of the observed structural evolution, offering both fundamental and practical advancements for the development of robust SiGr anodes for high‐energy‐density LIBs.
- Open Access
- 11 July 2025
- Published by Wiley in Energy & Environmental Materials
- Vol. 8 (6)
Unlocking the Electrochemical Activation of Diatomaceous Earth SiO2 Anodes for Next‐Generation Li‐Ion Batteries
Silica (SiO2) anodes are promising candidates for enhancing the energy density of next‐generation Li‐ion batteries, offering a compelling combination of high storage capacity, stable cycling performance, low cost, and sustainability. This performance stems from SiO2 unique lithiation mechanism, which involves its conversion to electroactive silicon (Si) and electrochemically inactive species. However, widespread adoption of SiO2 anodes is hindered by their slow initial lithiation. To address this, research has focused on developing electrochemical “activation protocols” that involve prolonged low‐potential holding steps to promote SiO2 conversion. Despite these efforts, the complex and multi‐pathway nature of SiO2 lithiation process remains poorly understood, impeding the rational design of effective activation strategies. By introducing a multi‐probe characterization approach, this study reveals that, contrary to the previously proposed reaction mechanism of SiO2 anodes, the lithiation process initiates at low potentials with the direct formation of Li4SiO4 and LixSi. Electrochemical activation potential was found to significantly influence the degree of conversion, with 10 mV identified as the optimal cut‐off potential for maximizing SiO2 utilization. These findings provide key enablers to unlock the full potential of SiO2 anodes for battery technology.
- 11 July 2025
- Published by Wiley in Energy & Environmental Materials
- Vol. 8 (6)
Open AccessUnlocking the Electrochemical Activation of Diatomaceous Earth SiO2 Anodes for Next‐Generation Li‐Ion Batteries
Silica (SiO2) anodes are promising candidates for enhancing the energy density of next‐generation Li‐ion batteries, offering a compelling combination of high storage capacity, stable cycling performance, low cost, and sustainability. This performance stems from SiO2 unique lithiation mechanism, which involves its conversion to electroactive silicon (Si) and electrochemically inactive species. However, widespread adoption of SiO2 anodes is hindered by their slow initial lithiation. To address this, research has focused on developing electrochemical “activation protocols” that involve prolonged low‐potential holding steps to promote SiO2 conversion. Despite these efforts, the complex and multi‐pathway nature of SiO2 lithiation process remains poorly understood, impeding the rational design of effective activation strategies. By introducing a multi‐probe characterization approach, this study reveals that, contrary to the previously proposed reaction mechanism of SiO2 anodes, the lithiation process initiates at low potentials with the direct formation of Li4SiO4 and LixSi. Electrochemical activation potential was found to significantly influence the degree of conversion, with 10 mV identified as the optimal cut‐off potential for maximizing SiO2 utilization. These findings provide key enablers to unlock the full potential of SiO2 anodes for battery technology.
- Open Access
- 6 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (4) , 2249-2259
Toward the Controlled Synthesis of Nanostructured Si and SiOx Anodes for Li-Ion Batteries via SiO2 Magnesiothermic Reduction Reaction
Nanostructured SiOx (0 ≤ x ≤ 2) materials are key for boosting energy density in next-generation Li-ion battery anodes, with the magnesiothermic reduction reaction (MgTR) emerging as a scalable pathway for their production from nanoporous SiO2. In MgTR, SiO2 reacts with Mg at moderate temperatures to form Si and MgO, enabling the preservation of nanostructured features. However, the widespread application of MgTR is hindered by the strong influence of reaction parameters on process dynamics, which leads to the uncontrolled formation of multiple byproducts that not only reduce the Si yield but also require the use of hazardous hydrofluoric acid (HF) for their removal, hampering the synthesis of SiO x due to HF's reactivity with SiO2. Hence, a comprehensive understanding of MgTR dynamics and its interplay with reaction parameters constitutes an essential prerequisite toward the effective synthesis of advanced Si and SiO x nanostructures. In this work, a systematic approach combining a set of independent time-resolved in situ synchrotron X-ray diffraction studies was employed to provide for the first time a comprehensive understanding of MgTR dynamics under varied reaction conditions, including varied SiO2 source (amorphous vs crystalline), different SiO2-to-Mg ratios, and different heating ramps. This approach allowed to unveil a complete picture of MgTR and to identify key conditions to prevent byproduct formation. This advancement marks a critical step toward the large-scale zero-carbon footprint synthesis of Si-based anodes for Li-ion batteries, serving as general guidelines for the controlled synthesis of high-purity Si and SiO x advanced materials.
- 6 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (4) , 2249-2259
Open AccessToward the Controlled Synthesis of Nanostructured Si and SiOx Anodes for Li-Ion Batteries via SiO2 Magnesiothermic Reduction Reaction
Nanostructured SiOx (0 ≤ x ≤ 2) materials are key for boosting energy density in next-generation Li-ion battery anodes, with the magnesiothermic reduction reaction (MgTR) emerging as a scalable pathway for their production from nanoporous SiO2. In MgTR, SiO2 reacts with Mg at moderate temperatures to form Si and MgO, enabling the preservation of nanostructured features. However, the widespread application of MgTR is hindered by the strong influence of reaction parameters on process dynamics, which leads to the uncontrolled formation of multiple byproducts that not only reduce the Si yield but also require the use of hazardous hydrofluoric acid (HF) for their removal, hampering the synthesis of SiO x due to HF's reactivity with SiO2. Hence, a comprehensive understanding of MgTR dynamics and its interplay with reaction parameters constitutes an essential prerequisite toward the effective synthesis of advanced Si and SiO x nanostructures. In this work, a systematic approach combining a set of independent time-resolved in situ synchrotron X-ray diffraction studies was employed to provide for the first time a comprehensive understanding of MgTR dynamics under varied reaction conditions, including varied SiO2 source (amorphous vs crystalline), different SiO2-to-Mg ratios, and different heating ramps. This approach allowed to unveil a complete picture of MgTR and to identify key conditions to prevent byproduct formation. This advancement marks a critical step toward the large-scale zero-carbon footprint synthesis of Si-based anodes for Li-ion batteries, serving as general guidelines for the controlled synthesis of high-purity Si and SiO x advanced materials.
- Open Access
Deciphering the Impact of Current, Composition, and Potential on the Lithiation Behavior of Si‐Rich Silicon‐Graphite Anodes
Adding silicon (Si) to graphite (Gr) anodes is an effective approach for boosting the energy density of lithium‐ion batteries, but it also triggers mechanical instability due to Si volume changes upon (de)lithiation reactions. In this work, component‐specific (de)lithiation dynamics on Si‐rich (30 and 70 wt.% Si) SiGr anodes at various charge/discharge C‐rates are unveiled and compared to a graphite‐only electrode (100Gr) via operando synchrotron X‐ray diffraction coupled with differential capacity plots analysis. Results show preferential lithiation of amorphous Si above ≈200 mV and competing lithiation of Gr, amorphous Si, and crystalline Si below ≈200 mV. Discharge proceeds via sequential delithiation of Gr and amorphous lithium silicide. Si shifts the interconversion potentials of graphite intercalation compounds, lowering the Gr state of charge compared to 100Gr. In the 30% Si electrode, crystalline Si amorphization at potentials 15Si4 formation. These findings related to the potential‐ and current‐dependent dynamic changes on SiGr blends are crucial for designing stable high energy density SiGr anodes.
Open AccessDeciphering the Impact of Current, Composition, and Potential on the Lithiation Behavior of Si‐Rich Silicon‐Graphite Anodes
Adding silicon (Si) to graphite (Gr) anodes is an effective approach for boosting the energy density of lithium‐ion batteries, but it also triggers mechanical instability due to Si volume changes upon (de)lithiation reactions. In this work, component‐specific (de)lithiation dynamics on Si‐rich (30 and 70 wt.% Si) SiGr anodes at various charge/discharge C‐rates are unveiled and compared to a graphite‐only electrode (100Gr) via operando synchrotron X‐ray diffraction coupled with differential capacity plots analysis. Results show preferential lithiation of amorphous Si above ≈200 mV and competing lithiation of Gr, amorphous Si, and crystalline Si below ≈200 mV. Discharge proceeds via sequential delithiation of Gr and amorphous lithium silicide. Si shifts the interconversion potentials of graphite intercalation compounds, lowering the Gr state of charge compared to 100Gr. In the 30% Si electrode, crystalline Si amorphization at potentials 15Si4 formation. These findings related to the potential‐ and current‐dependent dynamic changes on SiGr blends are crucial for designing stable high energy density SiGr anodes.
- Open Access
- 23 August 2024
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 11 (5) , 737-743
Structure–property relationship of a complex photoluminescent arylacetylide-gold(I) compound. I: a pressure-induced phase transformation caught in the act
A pressure-induced triclinic-to-monoclinic phase transition has been caught `in the act' over a wider series of high-pressure synchrotron diffraction experiments conducted on a large, photoluminescent organo-gold(I) compound. Here, we describe the mechanism of this single-crystal-to-single-crystal phase transition, the onset of which occurs at ∼0.6 GPa, and we report a high-quality structure of the new monoclinic phase, refined using aspherical atomic scattering factors. Our case illustrates how conducting a fast series of diffraction experiments, enabled by modern equipment at synchrotron facilities, can lead to overestimation of the actual pressure of a phase transition due to slow transformation kinetics.
- 23 August 2024
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 11 (5) , 737-743
Open AccessStructure–property relationship of a complex photoluminescent arylacetylide-gold(I) compound. I: a pressure-induced phase transformation caught in the act
A pressure-induced triclinic-to-monoclinic phase transition has been caught `in the act' over a wider series of high-pressure synchrotron diffraction experiments conducted on a large, photoluminescent organo-gold(I) compound. Here, we describe the mechanism of this single-crystal-to-single-crystal phase transition, the onset of which occurs at ∼0.6 GPa, and we report a high-quality structure of the new monoclinic phase, refined using aspherical atomic scattering factors. Our case illustrates how conducting a fast series of diffraction experiments, enabled by modern equipment at synchrotron facilities, can lead to overestimation of the actual pressure of a phase transition due to slow transformation kinetics.
- Open Access
- 2 November 2023
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 9 (2) , 439-447
Tracking sodium cobaltate formation pathways and its CO2 capture dynamics in real time with synchrotron X-ray diffraction
Time-resolved synthesis and CO2 capture dynamics of sodium cobaltate solid sorbent allowed to unveil chemical reactions occurring under realistic operative conditions.
- 2 November 2023
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 9 (2) , 439-447
Open AccessTracking sodium cobaltate formation pathways and its CO2 capture dynamics in real time with synchrotron X-ray diffraction
Time-resolved synthesis and CO2 capture dynamics of sodium cobaltate solid sorbent allowed to unveil chemical reactions occurring under realistic operative conditions.