JRJetti Vatsala Rani

Jetti Vatsala Rani

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jetti Vatsala Rani has a total of 68 co-authors. Here are the top co-authors by number of shared publications:

  • V. Kanakaiah

    FluoroOrganic Division, CSIR-Indian Institute of Chemical Technology, Hyderabad India

    6 shared publications
  • Pratyay Basak

    Nanomaterials Laboratory, Department of Polymers and Functional Materials, CSIR-Indian Institute of Chemical Technology, Hyderabad, India

    4 shared publications
  • Venkata Narendra Kumar Y

    Polymers and Functional Materials Division, CSIR-Indian Institute of Chemical Technology, Hyderabad, India

    4 shared publications
  • Vinay Kumar Awaar

    Gokaraju Rangaraju Institute of Engineering and Technology

    4 shared publications
  • Devarapaga Madhu

    Centre for Lipid Science and Technology Division Indian Institute of Chemical Technology Hyderabad India

    3 shared publications
  • Gundu Venkateswarlu

    Polymers and Functional Materials Division Indian Institute of Chemical Technology Hyderabad India

    3 shared publications

Latest Publications

  • Enhanced Performance of WS 2 /Polythiophene Composite as a Positive Electrode in Rechargeable Aluminum Batteries

    by Y. Venkata Narendra Kumar, T. V. Anjanalakshmi, Lincoln Einstein Kengne Fotso, Jetti Vatsala Rani

    This research investigates the synthesis and performance characteristics of a composite material composed of tungsten disulfide (WS 2 ) and polythiophene (PTh) within a triethylamine hydrochloride (TEA) electrolyte. The synthesis process initiates with the combination of exfoliated WS 2 and PTh in predetermined ratios, followed by sonication in isopropanol to achieve a homogeneous dispersion. Subsequently, the mixture undergoes centrifugation to eliminate any residual solvent and unbound particles, yielding a stable composite. The electrochemical performance is evaluated through galvanostatic charge–discharge (GCD) testing, which reveals a coulombic efficiency exceeding 95% and a capacity of 150 mAh/g, underscoring its robust energy storage capabilities. The composite is subjected to 100 charge–discharge cycles to assess its stability. The study emphasizes the roles of WS 2 and PTh in enhancing the material's performance, with WS 2 significantly contributing to improved capacity and efficiency. These results indicate a promising potential for the composite in energy storage applications.

  • Novel V2O5/polythiophene composite: An advanced cathode material for rechargeable aluminium batteries

    by J. Vatsala Rani, Venkata Narendra Kumar Y, Anjanalakshmi T. V, Sandeepa Mohan, Sake Rayamma

  • Open Access

    Sensor Fusion-Based Pulsed Controller for Low Power Solar-Charged Batteries with Experimental Tests: NiMH Battery as a Case Study

    by Shyam Yadasu, Vinay Kumar Awaar, Vatsala Rani Jetti, Mohsen Eskandari

    Solar energy is considered the major source of clean and ubiquitous renewable energy available on various scales in electric grids. In addition, solar energy is harnessed in various electronic devices to charge the batteries and power electronic equipment. Due to its ubiquitous nature, the corresponding market for solar-charged small-scale batteries is growing fast. The most important part to make the technology feasible is a portable battery charger and the associated controllers to automate battery charging. The charger should consider the case of charging to be convenient for the user and minimize battery degradation. However, the issue of slow charging and premature battery life loss plagues current industry standards or innovative battery technologies. In this paper, a new pulse charging technique is proposed that obviates battery deterioration and minimizes the overall charging loss. The solar-powered battery charger is prototyped and executed as a practical, versatile, and compact photovoltaic charge controller at cut rates. With the aid of sensor fusion, the charge controller is disconnected and reconnects the battery during battery overcharging and deep discharging conditions using sensors with relays. The laboratory model is tested using a less expensive PV panel, battery, and digital signal processor (DSP) controller. The charging behavior of the solar-powered PWM charge controller is studied compared with that of the constant voltage–constant current (CV–CC) method. The proposed method is pertinent for minimizing energy issues in impoverished places at a reasonable price.


  • Advances in ionic-liquid-based eutectic electrolyte for high voltage rechargeable magnesium batteries

    by Raju Vadthya, Venkata Narendra Kumar Y, Vatsala Rani Jetti


  • Manganese–carbon (Mn–C) interaction to host Al 3+ -ions in a β-MnO 2 –MWCNT composite cathode in rechargeable aluminium ion batteries

    by Mohan Gorle, Santosh N. Chavan, A. Vijay Kumar, Vatsala Rani Jetti

    Rechargeable aluminium ion batteries (AIBs) are one of the potential metal battery alternatives to Li-ion batteries. A perfect pair of cathode and electrolyte is a key factor in developing a grid-scale Al ion battery. In this context, we evaluated a prototypical MWCNT and β-MnO2-20% composite (MWCNT/β-MnO2), in which β-MnO2 nanoparticles were grown on the surface of the MWCNT matrix by an ultra-sonication method followed by calcination at 400 °C and tested as a cathode system. The as-synthesized MWCNT/β-MnO2-20% cathode material was completely characterized by techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS) and thermo gravimetric analysis (TGA) to assess its composition and morphology. Its electrochemical performance was evaluated with the aid of various electroanalytical techniques, such as cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), and electrochemical impedance spectroscopy (EIS). MWCNT/β-MnO2-20% as a cathode system in AlCl3/Et3NHCl ionic liquid electrolyte showed a current density of 100 mA g−1 and a discharge capacity of 269 mA h g−1, and the resultant aluminium storage was around 60 cycles with a coulombic efficiency of 90%. Interestingly, this superior rate capability of the composite is due to the interdependent interaction between the β-MnO2 particles and MWCNTs as revealed by XPS, FT-IR, XRD and EDS techniques, which provided evidence for an intercalation and de-intercalation of the AlCl4 − ions into the cathode material during charge–discharge.

  • Enhanced reliability of aluminum–sulfur batteries with cost-effective ionic liquid electrolyte and sulfur/graphite cathode

    by Mohan Gorle, Vatsala Rani Jetti

    The low coulombic efficiency and mild conductivity have impeded the commercialization of sulfur-based batteries despite pairing with high energy density and low-cost aluminum anodes. In this study, we investigated cost-effective electrolyte confinement of the sulfur cathode to an Al/S@Gf battery, which employed a sulfur-graphite (S@Gf) cathode, an aluminum metal anode, and 1-ethyl-3-methyl imidazolium chloride (EMImCl):AlCl3 as an electrolyte. The Al/EMImCl:AlCl3/S@Gf battery exhibited remarkable performance in terms of rate capability and cycle life, delivering a high capacity of 1281 mA h g−1 at a current density of 300 mA g−1 with 90% coulombic efficiency (CE); additionally, it was stable at 800 mA g−1 withdrawing current. By employing an embedding technique to incorporate sulfur particles onto the graphite, we emulated previously observed glitches, such as capacity degradation and poor conductivity resulting in the accumulation of insoluble discharge products hindering ion diffusion. We demonstrated the potential of graphite to enhance the capability of holding sulfur for creating cells with repeatable, stable, and long-lasting charge storage features. This paper elucidates the interactions between carbon, sulfur, and aluminum electrolytes, and sheds light on their respective roles in the fundamental charge-storage process of aluminum–sulfur batteries.


  • Open Access

    Performance Analysis of Pulse-Based Solar Charge Controller for Low-Powered Battery Applications: NiMH Battery as a Case Study

    by Shyam Yadasu, VinayKumar Awaar, VatsalaRani Jetti, Mohsen Eskandari

    A significant replacement for numerous fossil fuels is solar energy as the main type of renewable energy resource. However, solar cells need battery energy storage units to handle the intermittent and uncontrollable nature of solar energy. In this light, there is a significant market for small, portable battery charge controllers that automate battery charging. However, the issue of slow charging and premature battery life loss plagues current industry-standard or innovative battery technology. This study proposes a quick pulse charging technique that stops battery deterioration and minimizes the overall charging period. The primary goal of this study is to develop, construct, and execution of a practical, versatile, and compact photovoltaic charge controller at cut rates. The suggested charge controller can disconnect and reconnect the battery during battery overcharging and deep discharging conditions using sensors with relays. The laboratory model is tested using a less expensive PV panel, battery, and DSP controller. The charging behavior of the solar-powered PWM charge controller is studied compared to that of the Constant Voltage - Constant Current (CV-CC) method. The proposed method is pertinent for minimizing energy issues in impoverished placesat a reasonable price.

  • Development of Novel Pulse Charger for Next‐Generation Batteries

    by Shyam Yadasu, Vatsala Rani Jetti, Vinay Kumar Awaar, Mohan Gorle

    Nowadays, battery‐powered direct current‐characterized loads are employed in domestic, commercial, and industrial applications. However, the current commercial or emerging new battery technologies are suffering from the problem of slow charging and early battery life degradation. This paper proposes a fast pulse charging method, which also prevents battery degradation. The research mainly focuses on the currently emerging aluminum batteries being charged using a pulse technique from the photovoltaic source. The pulse charge circuit is analyzed, simulated, designed, and tested with a rechargeable electrochemical cell as a load. The simulations are performed using MATLAB/Simulink software. The laboratory model is implemented with the Arduino Mega2560 board‐based pulse width modulation technique. The proposed charger circuit is tested with two different charging methods using a pulse technique through continuous conduction mode used to test the Al battery. The results showed a reduction in total charging time, and the battery's overall performance was immensely improved. The charge and discharge studies of the battery have been carried out using a biologic electrochemical station.