Otilia-Sanda Prelipceanu
Research Interests
Otilia-Sanda Prelipceanu has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Marius Prelipceanu
Faculty of Electrical Engineering and Computer Science, Stefan cel Mare University of Suceava, 720229 Suceava, Romania
7 shared publications Liviu Leontie
Integrated Center of Environmental Science Studies in the North-East Region (CERNESIM), Alexandru Ioan Cuza University, Faculty of Physics, Bulevardul Carol I, Nr. 11, 700506 Iasi, Romania
2 shared publicationsOvidiu-Gelu Tudose
Department of Physics Engineering, Faculty of Engineering, University of Applied Sciences Wildau, Friedrich-Engels-Strasse 63, D-15475 Wildau, Germany
2 shared publicationsSigurd Schrader
Department of Physics Engineering, Faculty of Engineering, University of Applied Sciences Wildau, Friedrich-Engels-Strasse 63, D-15475 Wildau, Germany
2 shared publications- Adina Oana Armencia
Grigore T. Popa University of Medicine and Pharmacy, 700115 Iasi, Romania
1 shared publication - Alexandru Popa
Faculty of Engineering, Aurel Vlaicu University of Arad, ROMANIA
1 shared publication
Latest Publications
- Open Access
Analytical Study Regarding the Behavior of Cr-Co and Ni-Cr in Saliva
Background and Objectives: The interaction between dental alloys and saliva affects both its own properties and those of metallic materials. Materials and Methods: Samples made of Cr-Co and Ni-Cr were studied. It was opted for corrosion under tension, scanning electron microscopy was used to characterize the surface morphology, and the chemical composition of the surface was assessed with the help of an Energy Dispersive Spectrometer. In vitro testing of the cytotoxic impact of the study eluates was carried out by flow cytometric analysis. Results: Pitting areas appear in the mass of the Ni-Cr alloy. Nickel, Manganese, and Cobalt dissolve and go into the solution. Corrosion is superficial in the case of the Cr-Co alloy, the corrosion points are shallow, and the amount of dissolved metal is relatively small. Mostly Nickel passes into the solution, unlike Chromium and Cobalt, which remain at this level. We noticed an increase in the viability of cell cultures in the case of Cr-Co alloy and a decrease in the number of living cells (87%) for Ni-Cr alloy. Conclusions: Common alloys (Ni-Cr and Cr-Co) are prone to corrosion, because they lack structural features that would shield the alloy from corrosion agents.
Open AccessAnalytical Study Regarding the Behavior of Cr-Co and Ni-Cr in Saliva
Background and Objectives: The interaction between dental alloys and saliva affects both its own properties and those of metallic materials. Materials and Methods: Samples made of Cr-Co and Ni-Cr were studied. It was opted for corrosion under tension, scanning electron microscopy was used to characterize the surface morphology, and the chemical composition of the surface was assessed with the help of an Energy Dispersive Spectrometer. In vitro testing of the cytotoxic impact of the study eluates was carried out by flow cytometric analysis. Results: Pitting areas appear in the mass of the Ni-Cr alloy. Nickel, Manganese, and Cobalt dissolve and go into the solution. Corrosion is superficial in the case of the Cr-Co alloy, the corrosion points are shallow, and the amount of dissolved metal is relatively small. Mostly Nickel passes into the solution, unlike Chromium and Cobalt, which remain at this level. We noticed an increase in the viability of cell cultures in the case of Cr-Co alloy and a decrease in the number of living cells (87%) for Ni-Cr alloy. Conclusions: Common alloys (Ni-Cr and Cr-Co) are prone to corrosion, because they lack structural features that would shield the alloy from corrosion agents.
- Open Access
- 1 March 2022
- Published by Walter de Gruyter GmbH in BULETINUL INSTITUTULUI POLITEHNIC DIN IAȘI. Secția Matematica. Mecanică Teoretică. Fizică
- Vol. 68 (1) , 21-34
Research on Obtaining and Characterizing Ni - W Electroplating Alloys for Micro-Electro Mechanics
The present research aimed to electrodeposit and characterize Ni-W alloys for different technological parameters, being an example of “induced co-deposition”, in which a certain metal (for example: Mo, W) can be co-deposited as an alloy, but it cannot be measured in its pure state. The investigated characteristics were the efficiency current, the average thickness, and the structural properties of the obtained deposits. The current efficiency decreases with an increased applied current density, and the tungsten content remains constant at around 11% for different current densities (10 mA·cm −2 and 16 mA·cm −2 , respectively). An increase in the temperature of the electrolyte leads to the inclusion of more tungsten. The deposit tungsten content and the current efficiency are directly related to pH. The deposit hardness directly relates to the alloy composition, deposit morphology, and coating thickness. The higher hardness, approximatively 100 HV were measured and the optimal brightness were observed for the alloys obtained at increased current density (i = 16 mA·cm −2 , T = 50°C, pH = 8), or to a basic pH (i = 10 mA·cm −2 , T = 50°C, pH = 9.23). The scanning electron microscopy (SEM) technique was used to analyze the surface morphology, and energy dispersive spectroscopy (EDS) analysis was carried out to determine the composition of the alloys. The metallic surface brightness (%) was evaluated using the miniature spectrometer, based on the reflection property of the electrodeposited metallic layer, scanning the all-wavelength range between 200-1100 nm.
- 1 March 2022
- Published by Walter de Gruyter GmbH in BULETINUL INSTITUTULUI POLITEHNIC DIN IAȘI. Secția Matematica. Mecanică Teoretică. Fizică
- Vol. 68 (1) , 21-34
Open AccessResearch on Obtaining and Characterizing Ni - W Electroplating Alloys for Micro-Electro Mechanics
The present research aimed to electrodeposit and characterize Ni-W alloys for different technological parameters, being an example of “induced co-deposition”, in which a certain metal (for example: Mo, W) can be co-deposited as an alloy, but it cannot be measured in its pure state. The investigated characteristics were the efficiency current, the average thickness, and the structural properties of the obtained deposits. The current efficiency decreases with an increased applied current density, and the tungsten content remains constant at around 11% for different current densities (10 mA·cm −2 and 16 mA·cm −2 , respectively). An increase in the temperature of the electrolyte leads to the inclusion of more tungsten. The deposit tungsten content and the current efficiency are directly related to pH. The deposit hardness directly relates to the alloy composition, deposit morphology, and coating thickness. The higher hardness, approximatively 100 HV were measured and the optimal brightness were observed for the alloys obtained at increased current density (i = 16 mA·cm −2 , T = 50°C, pH = 8), or to a basic pH (i = 10 mA·cm −2 , T = 50°C, pH = 9.23). The scanning electron microscopy (SEM) technique was used to analyze the surface morphology, and energy dispersive spectroscopy (EDS) analysis was carried out to determine the composition of the alloys. The metallic surface brightness (%) was evaluated using the miniature spectrometer, based on the reflection property of the electrodeposited metallic layer, scanning the all-wavelength range between 200-1100 nm.
- Open Access
- 18 January 2019
- Published by MDPI AG in Atmosphere
- Vol. 10 (1) , 38
A Turbulence-Oriented Approach to Retrieve Various Atmospheric Parameters Using Advanced Lidar Data Processing Techniques
The article is aimed at presenting a semi-empirical model coded and computed in the programming language Python, which utilizes data gathered with a standard biaxial elastic lidar platform in order to calculate the altitude profiles of the structure coefficients of the atmospheric refraction index and other associated turbulence parameters. Additionally, the model can be used to calculate the PBL (Planetary Boundary Layer) height, and other parameters typically employed in the field of astronomy. Solving the Fernard–Klett inversion by correlating sun-photometer data obtained through our AERONET site with lidar data, it can yield the atmospheric extinction and backscatter profiles and , and thus obtain the atmospheric optical depth. Finally, several theoretical notions of interest that utilize the solved parameters are presented, such as approximated relations between and the atmospheric temperature profile , and between the scintillation of backscattered lidar signal and the average wind speed profile . These obtained profiles and parameters also have several environmental applications that are connected directly and indirectly to human health and well-being, ranging from understanding the transport of aerosols in the atmosphere and minimizing the errors in measuring it, to predicting extreme, and potentially-damaging, meteorological events.- 18 January 2019
- Published by MDPI AG in Atmosphere
- Vol. 10 (1) , 38
Open AccessA Turbulence-Oriented Approach to Retrieve Various Atmospheric Parameters Using Advanced Lidar Data Processing Techniques
The article is aimed at presenting a semi-empirical model coded and computed in the programming language Python, which utilizes data gathered with a standard biaxial elastic lidar platform in order to calculate the altitude profiles of the structure coefficients of the atmospheric refraction index and other associated turbulence parameters. Additionally, the model can be used to calculate the PBL (Planetary Boundary Layer) height, and other parameters typically employed in the field of astronomy. Solving the Fernard–Klett inversion by correlating sun-photometer data obtained through our AERONET site with lidar data, it can yield the atmospheric extinction and backscatter profiles and , and thus obtain the atmospheric optical depth. Finally, several theoretical notions of interest that utilize the solved parameters are presented, such as approximated relations between and the atmospheric temperature profile , and between the scintillation of backscattered lidar signal and the average wind speed profile . These obtained profiles and parameters also have several environmental applications that are connected directly and indirectly to human health and well-being, ranging from understanding the transport of aerosols in the atmosphere and minimizing the errors in measuring it, to predicting extreme, and potentially-damaging, meteorological events. - Open Access
Investigations of Novel High-Temperature Resistant Polymers for Electro-Optical Applications in Signal Processing Systems
In this paper the novel high-temperature resistant polymers with nonlinear optical properties have been synthesized, characterized and tested for use in electro-optical components with high bit rate optical signal processing systems and for dynamic holography. The characterization that has been reported include the measurement of second-order nonlinear susceptibility by second harmonic generation, UV-VIS spectroscopy, XRD measurement dielectric relaxation, glass transition temperature and molecular weight distribution before and after artificial ageing. Also, we have done AFM investigations and profilometry measurements for stamp patterning layers. The application of the new polyimides for electro-optic devices has been evaluated by creation of thin oriented polymer films on various substrates and preparation of planar and strip waveguides.
Open AccessInvestigations of Novel High-Temperature Resistant Polymers for Electro-Optical Applications in Signal Processing Systems
In this paper the novel high-temperature resistant polymers with nonlinear optical properties have been synthesized, characterized and tested for use in electro-optical components with high bit rate optical signal processing systems and for dynamic holography. The characterization that has been reported include the measurement of second-order nonlinear susceptibility by second harmonic generation, UV-VIS spectroscopy, XRD measurement dielectric relaxation, glass transition temperature and molecular weight distribution before and after artificial ageing. Also, we have done AFM investigations and profilometry measurements for stamp patterning layers. The application of the new polyimides for electro-optic devices has been evaluated by creation of thin oriented polymer films on various substrates and preparation of planar and strip waveguides.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 110-113
Porous spinel-type oxide semiconductors for high-performance acetone sensors
Spinel-type semiconductor compounds represent an alternative for robust and inexpensive detection systems, due to their good thermal and chemical stability in operation. The sensing mechanism is based on the change in electric resistivity when exposed to specific gaseous ambient, resulting from chemical reactions between metal-oxide surface and gas molecules. Sample composition and morphology are key factors in determining the selectivity and sensitivity of solid-state sensors. In this work structural, morphological and sensory characteristics of some porous oxide semiconductors with spinel-type structure (Nk 0.99 Co 0.01 Mn 0.02 Fe 1.98 O 4-δ , Li 0.5 Sm 0.1 Fe 2.4 O 4 and Mg 0.9 Sn 0.1 Fe 2 O 4 ) are presented. The self-combustion technique was used to prepare these compounds. This method offers the advantage of obtaining nanosized reproducible and porous ceramics with high specific surface area and exact stoichiometry. Investigated compounds hold promise for high-performance applications in acetone sensors.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 110-113
Porous spinel-type oxide semiconductors for high-performance acetone sensors
Spinel-type semiconductor compounds represent an alternative for robust and inexpensive detection systems, due to their good thermal and chemical stability in operation. The sensing mechanism is based on the change in electric resistivity when exposed to specific gaseous ambient, resulting from chemical reactions between metal-oxide surface and gas molecules. Sample composition and morphology are key factors in determining the selectivity and sensitivity of solid-state sensors. In this work structural, morphological and sensory characteristics of some porous oxide semiconductors with spinel-type structure (Nk 0.99 Co 0.01 Mn 0.02 Fe 1.98 O 4-δ , Li 0.5 Sm 0.1 Fe 2.4 O 4 and Mg 0.9 Sn 0.1 Fe 2 O 4 ) are presented. The self-combustion technique was used to prepare these compounds. This method offers the advantage of obtaining nanosized reproducible and porous ceramics with high specific surface area and exact stoichiometry. Investigated compounds hold promise for high-performance applications in acetone sensors.
- 1 August 2007
- Published by Elsevier in Physics Letters A
- Vol. 368 (3-4) , 331-335
Photoelectron spectroscopy investigations of pyrrolophenanthroline derivatives
- 1 August 2007
- Published by Elsevier in Physics Letters A
- Vol. 368 (3-4) , 331-335
Photoelectron spectroscopy investigations of pyrrolophenanthroline derivatives
- 1 April 2007
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 10 (2-3) , 77-89
Study of thermal conversion and patterning of a new soluble poly (p-phenylenevinylene) (PPV) precursor
- 1 April 2007
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 10 (2-3) , 77-89
Study of thermal conversion and patterning of a new soluble poly (p-phenylenevinylene) (PPV) precursor
- 1 February 2007
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 10 (1) , 24-35
Study of oriented growth of oligofluorene–thiophene films onto aligned vacuum-deposited polytetrafluoroethylene layers
- 1 February 2007
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 10 (1) , 24-35
Study of oriented growth of oligofluorene–thiophene films onto aligned vacuum-deposited polytetrafluoroethylene layers