Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Timuçin Everest has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determination of Suitable Lands for Sugar Beet Cultivation Using GIS and FUCOM

    by Timuçin Everest

    The primary objective of this study is to evaluate the suitability of sugar beet lands using Geographic Information Systems (GIS) and the Multi Criteria Decision Making (MCDM) method, due to the limited number of crop-based land suitability studies on sugar beet cultivation in the literature. The research was conducted in the central and northern parts of the Karamenderes Plain, covering approximately 52,000 ha in NW Türkiye, where farmers have recently shifted to sugar beet cultivation for economic reasons but lack spatial decision-support tools. In the study, eight soil and land characteristics were evaluated: soil texture, pH, electrical conductivity (EC), soil depth, organic carbon content, slope, drainage, and the Soil Fertility Index Score (nitrogen, phosphorus, and potassium) (SFIS). The Full Consistency Method (FUCOM) was used to determine the weighted values of soil and land characteristics. Present assessments revealed that of the evaluated lands, 28047,50 ha was highly suitable, 21290,10 ha moderately suitable, 394,42 ha marginally suitable, and 2105,16 ha not suitable for sugar beet cultivation. The combined use of FUCOM and GIS to determine suitable land for sugar beet cultivation facilitated assessments and provided significant advantages in terms of time and economic aspects. In addition to identifying suitable areas for sugar beet cultivation, the findings provide a practical decision-support approach for land-use planning and agricultural policymaking by enabling more efficient, sustainable use of land resources. The proposed model can be used under similar or different environmental conditions.

  • Batak Ovası Tarım Topraklarının Ağır Metal İçeriklerinin Değerlendirilmesi

    by Timuçin Everest, Erdem Temel, Ali Sungur, Hasan Özcan

    Tarım arazilerinde ağır metal ve etkileşimlerinin belirlenip izlenmesi sürdürülebilirlik açısından son derece önemlidir. Bu çalışma Çanakkale ili Troya Tarihi Milli Parkı sınırları içinde gerçekleştirilmiştir. Araştırma kapsamında tarım arazilerinde belirlenen noktalarda 15 adet yüzeyden toprak örneği alınmıştır. Toprak örneklerinin fiziko-kimyasal özellikleri (toprak tekstürü, pH, EC, organik madde ve kireç içerikleri) ile toplam ve alınabilir ağır metal içerikleri belirlenmiştir. Toplam ağır metal içeriklerinin belirlenmesi için kral suyu (Aqua regia) yaş yakma metodu, alınabilir içerikler için ise dietilen triamin pentaasetik asit (DTPA) ekstraksiyon yöntemi kullanılmıştır. Toprak örneklerinin toplam ağır metal konsantrasyonlarının ortalama değerleri incelendiğinde Cu (16,39 µg/g), Pb (25,69 µg/g) ve Zn (35,69 µg/g)’nin kabul edilebilir limitlerde olduğu, Ni elementinin ise 70,26 µg/g ortalama değer ile limitlerin biraz üzerinde olduğu görülmüştür. Alınabilir ortalama değerlere göre ise Cu, Ni, Pb ve Zn değerlerinin sırasıyla 1,33 µg/g, 0,76 µg/g, 1,20 µg/g ve 1,14 µg/g olduğu ve belirlenen limit değerlerin altında olduğu görülmüştür. İstatistiksel olarak pH ile Cu ve Zn, kireç ve organik madde ile Pb ve Zn ve toprak tekstürü ile de tüm metaller arasında farklı ilişkiler belirlenmiştir. Yapılan bu çalışma ile sürdürülebilir tarımsal üretim ve toprak sağlığı açısından izleme ve değerlendirme çalışmalarının önemini yeniden vurgulanmıştır.

  • Open Access

    ICONA Modeli ile Biga Yarımadası Güneybatı Bölümünün Erozyon Risk Değerlendirmesi

    by Timuçin Everest, Ali Sungur, Hasan Özcan

    Erozyon, arazi kaynakları üzerinde küresel ölçekte bir tehlike oluşturan bir degradasyon unsurudur. Bu çalışma Türkiye’nin kuzeybatısında bulunan Biga yarımadasının güneybatı bölümünü oluşturan arazilerde gerçekleştirilmiştir. Çalışmada erozyon risk durumu belirlemek için ICONA (Instituto Nacional para la Conservación de la Naturaleza) modeli kullanılmıştır. ICONA modelinde; eğim, jeoloji, arazi örtüsü ve vejetasyon yoğunluğu verileri bir sistematik içinde değerlendirilmekte ve sonuç haritaları coğrafi bilgi sistemleri (CBS) ortamında üretilmektedir. Modelde ilk aşamada dijital yükseklik modeli (DEM) kullanılarak eğim sınıfları oluşturulmuştur. Oluşturulan eğim sınıfları model doğrultusunda kategorize edilerek jeolojik birimler ile birleştirilmiş ve çalışma alanının potansiyel erozyon risk haritası oluşturulmuştur. Daha sonra toprak koruma haritasını oluşturmak için arazi örtüsü ve vejetasyon yoğunluğu haritaları üretilmiştir. Bu parametreler arazide bulunan farklı arazi kullanım türlerinin model doğrultusunda kategori edilmesi ve arazideki vejetasyonun örtü oranını belirlemede kullanılmıştır. Bu kapsamda Coordination of Information on the Environment - Çevresel Bilginin Koordinasyonu (CORINE) 2018 yılı verileri kullanılmıştır. Üretilen potansiyel erozyon haritası ve toprak koruma haritası ICONA modeli doğrultusunda birleştirilerek sonuç ICONA haritası üretilmiştir. Sonuç haritası verilerine göre; çalışma alanı arazilerinin %0.19’unda çok az, %33.32’sinde az, %42.32’sinde orta, %21.82’inde yüksek ve %2.35’inde çok yüksek erozyon riski olduğu ortaya konmuştur. Gerçekleştirilen bu çalışma ile üretilen veriler doğal kaynakların izlenme, değerlendirme ve yönetimi açısından önemli bilgiler sunabilecek potansiyele sahiptir. İlaveten ICONA yönteminin geniş alanların erozyon riskinin belirlenmesinde faydalı olduğu ve önemli fikirler verdiği gözlemlenmiştir. Bu modelin daha farklı bölgelerde de uygulanması tavsiye edilmektedir.


  • Open Access

    Determination of Cu, Pb, and Zn Contents of Soils Formed on Different Parent Materials (Çanakkale, Türkiye)

    by Erdem Temel, Timuçin Everest, Ali Sungur, Hasan Özcan

    This study was carried out to determine the heavy metal (Cu, Pb, and Zn) contents and their differences in soils formed on three different parent materials (basalt, clastic and carbonate rocks and granite) in the Ezine district of Çanakkale province. For this purpose, surface sampling was conducted in soils formed under natural conditions on different geological materials. Heavy metal contents of the soil samples were determined using flame atomic absorption spectrometry using the wet digestion Aqua regia method. Analysis of variance (ANOVA) was used to determine the elemental differences in soil samples. Pearson correlation analysis was applied to reveal the relationship between heavy metals and the physicochemical properties of soils taken from different parent materials. As a result of the evaluation, the mean Cu concentrations in the samples ranged from soils formed on basalt (40.8 ± 3.8 μg/g)> soils formed on clastic and carbonate rocks (24.8 ± 1.5 μg/g)> soils formed on granite (22.5 ± 2. 8 μg/g); mean Pb concentrations followed the order of soils formed on granite (37.50 ± 3.30 μg/g)> soils formed on clastic and carbonate rocks (35.67 ± 2.74 μg/g)> soils formed on basalt (21.6 ± 6.7 μg/g). The mean Zn concentrations of the soil samples were as follows: soils formed on basalt (80.9 ± 8.7 μg/g)> soils formed on clastic and carbonate rocks (44.1 ± 3.7 μg/g)> soils formed on granite (37.0 ± 9.4 μg/g). Pb concentrations of all soil samples were found to be higher than the average of the earth's crust.


  • Spatial distribution of heavy metals in soils around cement factory and health risk assessment: a case study of Canakkale-Ezine (NW Turkey)

    by Mehmet Parlak, Timuçin Everest, Tülay Tunçay

    Sustainable use of agricultural land plays a crucial role in ensuring food security. For sustainable use of soils, it is very important to focus on the pollution status. This study was conducted on the soils in the northern part of the Ezine district in northwestern Turkey. The study aimed to determine the physicochemical properties of the soils in the vicinity of the cement plant, the concentrations of heavy metals, the spatial distribution of heavy metals, and their impact on the health of the local human population. Soil samples were collected from the cement plant in different directions (S,W, N, E, NE, SW) and at different distances (1, 3, 5, and 7 km) from 0–10 cm depth with three replicates. The soil samples were analyzed for texture, pH, electrical conductivity, lime, and heavy metals such as Cd, Co, Cu, Fe, Mn, Ni, Pb, and Zn. The soils had different textures (loam, sandy clay loam, loam, sandy loam), slightly alkaline pH, low lime content, and moderate organic matter content. Except for Cd and Pb, the average values of the other heavy metals (Co = 1.18 < 19 mg kg−1,Cr = 50.92 < 90 mg kg−1, Cu = 31.21 < 45 mg kg−1, Fe = 16,007 < 47,200 mg kg−1, Mn = 499.68 < 850 mg kg−1, Ni = 41.17 < 68 mg kg−1, Zn = 50.91 < 95 mg kg−1) in the soils were below the normal background level. The heavy metal contents of the soils in the study area are influenced by various sources (geological structure, agrochemicals used in agricultural activities, and vehicle traffic). The prevailing wind direction did not influence the local distribution of heavy metals in soils in the study area. The health risk assessment model studies showed that the hazard quotient values of less than 1 for adults and children indicate that the noncarcinogenic risks were insignificant. People exposed to heavy metals in the soils of the study area contaminated from various sources for a long time could be at carcinogenic risk. Since Cr and Pb exceed the acceptable risk range in children and Cr exceeds the acceptable risk range in adults, geochemical monitoring of soils should be conducted periodically by authorized institutions in the study area.


  • Suitable site selection by using full consistency method (FUCOM): a case study for maize cultivation in northwest Turkey

    by Timuçin Everest, Gönül Selin Savaşkan, Aykut Or, Hasan Özcan

    The agricultural land evaluation procedure is a valuable guide for growing plants where they are best suitable, and it has a critical role in actualizing sustainable plans for providing food security for the growing population. In agricultural land suitability analysis, different multi-criteria decision-making methods are applied. The main objective of this study is to introduce the potential usage of a new multi-criteria decision-making method the Full Consistency Method (FUCOM) in agricultural land suitability analysis. The study was carried out in the northern part of the Karamenderes plain in NW Turkey. Nine land characteristics (soil texture, soil depth, organic matter content, electrical conductivity, pH, slope, drainage, CaCO3%, and cation exchange capacity) were used for the land evaluation study. The weighting values of the land characteristics were calculated by the FUCOM. According to the results, 223 ha (6.26%) were highly suitable, 2650 ha (74.40%) were moderately suitable, 508 ha (14.26%) were marginally suitable, and 181 ha (5.08%) were not suitable for maize cultivation. The weighted values of the parameters were also tested with Analytic Hierarchy Process (AHP) and the Best-Worst Method (BWM). There is a general compatibility between the methodologies. The data obtained from these methods showed that analysis consists of a very positive relationship with each other. The comparisons of these methodologies showed that FUCOM’s prioritization order simplicity in parameter weighting and ability to reduce the processing intensity would provide a significant contribution and advantage to the land evaluation experts and planners. It is recommended that the Full Consistent Method could be reliably used in agricultural land suitability analysis.