Shadi Fatayer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shadi Fatayer has a total of 229 co-authors. Here are the top co-authors by number of shared publications:
- Leo Gross
IBM Research Europe – Zurich, Rüschlikon, Switzerland
22 shared publications - Diego Peña
Universidade de Santiago de Compostela
14 shared publications - Bruno Schuler
Nanotech@surfaces Laboratory, Empa – Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
8 shared publications - Florian Albrecht
IBM Research Europe – Zurich, Rüschlikon, Switzerland
8 shared publications Gerhard Meyer
IBM Research-Zurich, Säumerstrasse 4, 8803 Rüschlikon, Switzerland
8 shared publications- Dolores Pérez
Universidade de Santiago de Compostela
6 shared publications
Latest Publications
- 22 October 2026
- Published by Wiley in Advanced Materials
Engineered Excited‐State Coupling Enables Efficient Exciton Harvesting in Binuclear Copper Iodide Cluster Scintillators
Environmentally benign scintillators with broadband radioluminescence are highly desirable for low‐cost, high‐performance x‐ray imaging. Recently, copper iodide (Cu–I) clusters have emerged as promising candidates, owing to strong spin‐orbit coupling, favorable solution processability, excellent x‐ray absorption efficiency, and efficient exciton harvesting enabled by aggregation‐induced emission and thermally activated delayed fluorescence. However, the mechanism by which aggregation‐state variation enhances the light yield by modulating intermolecular interactions remains poorly understood. Here, we establish a pair of isomeric Cu–I clusters with nearly identical x‐ray attenuation coefficients as a model platform to isolate and elucidate the role of intermolecular coupling. In this context, we uncover a breakthrough mechanistic picture in which engineered excited‐state coupling accelerates carrier relaxation and promotes efficient exciton harvesting and radiative recombination. Guided by this mechanism, water‐resistant cluster scintillator glasses with excellent processing flexibility are fabricated, delivering a high light yield of 32,456 photons MeV −1 and spatial resolution of 33.6 lp mm −1 . Furthermore, tandem integration with a high‐Z scintillator enables selective density‐discriminating x‐ray imaging and micro‐computed tomography. This work provides mechanistic guidance for ligand engineering in the design of efficient cluster scintillators and facilitates the high‐throughput development of promising metal‐cluster complexes for advanced optoelectronic applications.
- 22 October 2026
- Published by Wiley in Advanced Materials
Engineered Excited‐State Coupling Enables Efficient Exciton Harvesting in Binuclear Copper Iodide Cluster Scintillators
Environmentally benign scintillators with broadband radioluminescence are highly desirable for low‐cost, high‐performance x‐ray imaging. Recently, copper iodide (Cu–I) clusters have emerged as promising candidates, owing to strong spin‐orbit coupling, favorable solution processability, excellent x‐ray absorption efficiency, and efficient exciton harvesting enabled by aggregation‐induced emission and thermally activated delayed fluorescence. However, the mechanism by which aggregation‐state variation enhances the light yield by modulating intermolecular interactions remains poorly understood. Here, we establish a pair of isomeric Cu–I clusters with nearly identical x‐ray attenuation coefficients as a model platform to isolate and elucidate the role of intermolecular coupling. In this context, we uncover a breakthrough mechanistic picture in which engineered excited‐state coupling accelerates carrier relaxation and promotes efficient exciton harvesting and radiative recombination. Guided by this mechanism, water‐resistant cluster scintillator glasses with excellent processing flexibility are fabricated, delivering a high light yield of 32,456 photons MeV −1 and spatial resolution of 33.6 lp mm −1 . Furthermore, tandem integration with a high‐Z scintillator enables selective density‐discriminating x‐ray imaging and micro‐computed tomography. This work provides mechanistic guidance for ligand engineering in the design of efficient cluster scintillators and facilitates the high‐throughput development of promising metal‐cluster complexes for advanced optoelectronic applications.
- Open Access
- 10 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (62) , e76715
Achieving 3.31 V in Triple‐Junction Perovskite–Organic Tandem Solar Cells via Lattice Distortion–Induced Phase Stability
Tandem solar cells offer an approach to overcoming the Shockley–Queisser limit inherent to single‐junction solar devices. Perovskite‐based triple‐junction cells, particularly the perovskite‐perovskite‐organic (PPO) configuration, offer a balance of high theoretical power conversion efficiency (PCE), processability, and reduced manufacturing complexity. However, their PCE is often limited by the front wide‐bandgap perovskite sub‐cell due to halide segregation, non‐radiative recombination, and poor interfacial quality between stacked layers. Herein, we report the development of triple‐junction PPO solar cells that overcome these limitations, offering improved performance. We show that incorporating rubidium (Rb + ) ions into the A‐site of the wide‐bandgap Cs 0.40 FA 0.60 Pb(I 0.40 Br 0.60 ) 3 perovskite induces lattice distortion, suppressing halide segregation and reducing mobile‐ion concentration. The ensuing cells show an open‐circuit voltage ( V OC ) of 1.46 V, which is among the highest reported values for ultra‐wide‐bandgap PSCs. For the mid‐bandgap perovskite sub‐cell, urea addition promotes grain growth, resulting in a denser film that prevents crack formation during deposition atop the wide‐bandgap front sub‐cell. By combining the two perovskite sub‐cells with an organic bulk‐heterojunction sub‐cell, and guided by optical simulations, we developed triple‐junction tandem devices with record V OC (3.31 V) and PCE (23.03%) for the PPO configuration. Our work underscores the role of compositional engineering in advancing perovskite‐based multi‐junction photovoltaics.
- 10 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (62) , e76715
Open AccessAchieving 3.31 V in Triple‐Junction Perovskite–Organic Tandem Solar Cells via Lattice Distortion–Induced Phase Stability
Tandem solar cells offer an approach to overcoming the Shockley–Queisser limit inherent to single‐junction solar devices. Perovskite‐based triple‐junction cells, particularly the perovskite‐perovskite‐organic (PPO) configuration, offer a balance of high theoretical power conversion efficiency (PCE), processability, and reduced manufacturing complexity. However, their PCE is often limited by the front wide‐bandgap perovskite sub‐cell due to halide segregation, non‐radiative recombination, and poor interfacial quality between stacked layers. Herein, we report the development of triple‐junction PPO solar cells that overcome these limitations, offering improved performance. We show that incorporating rubidium (Rb + ) ions into the A‐site of the wide‐bandgap Cs 0.40 FA 0.60 Pb(I 0.40 Br 0.60 ) 3 perovskite induces lattice distortion, suppressing halide segregation and reducing mobile‐ion concentration. The ensuing cells show an open‐circuit voltage ( V OC ) of 1.46 V, which is among the highest reported values for ultra‐wide‐bandgap PSCs. For the mid‐bandgap perovskite sub‐cell, urea addition promotes grain growth, resulting in a denser film that prevents crack formation during deposition atop the wide‐bandgap front sub‐cell. By combining the two perovskite sub‐cells with an organic bulk‐heterojunction sub‐cell, and guided by optical simulations, we developed triple‐junction tandem devices with record V OC (3.31 V) and PCE (23.03%) for the PPO configuration. Our work underscores the role of compositional engineering in advancing perovskite‐based multi‐junction photovoltaics.
- 29 May 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (11)
Silicon Zintl Intermetallics With Low Work Functions for Ammonia Synthesis
Barium‐based Zintl‐phase intermetallic supports (BaAlSi and BaSi 2 ) deliver significantly higher ammonia synthesis rates than their calcium‐based counterparts (CaAlSi, CaSi 2 , and CaSi), owing to their stronger electron‐donating (lower work function) character. These Zintl compounds have low work functions, ranging from 2.6 – 3.5 eV as calculated by DFT, and below 3.0 eV when UPS is measured on Ar‐sputtered powders. Under Haber‐Bosch reaction conditions at 5 MPa, BaAlSi and CaAlSi form hydrides, but kinetic analysis reveals that this does not alter the catalytic mechanism. Reaction orders and activation energies remain essentially unchanged, and nonhydride‐forming silicides (BaSi 2 and CaSi 2 ) show similarly high activity, indicating that hydride formation has minimal impact on catalysis. At 5 MPa, 400°C, Co/BaAlSi achieved activities of 55 mmol∙g − 1 ∙h − 1 , exceeding the commercial Fe‐based KM‐1 catalyst (41 mmol∙g − 1 ∙h − 1 ). Moreover, the BaAlSi‐ and BaSi 2 ‐supported Co and Ru catalysts achieved NH 3 production rates of 500–700 mmol∙g ( Ru/Co ) − 1 ∙h − 1 , surpassing the performance of many previously reported ammonia synthesis catalysts. Previous intermetallic catalysts for ammonia synthesis focused on specific properties such as electride nature, electron‐excess, or hydride formation; our results show that a wider range of Zintl compounds have adequately low work functions and reasonably high activities overall.
- 29 May 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (11)
Silicon Zintl Intermetallics With Low Work Functions for Ammonia Synthesis
Barium‐based Zintl‐phase intermetallic supports (BaAlSi and BaSi 2 ) deliver significantly higher ammonia synthesis rates than their calcium‐based counterparts (CaAlSi, CaSi 2 , and CaSi), owing to their stronger electron‐donating (lower work function) character. These Zintl compounds have low work functions, ranging from 2.6 – 3.5 eV as calculated by DFT, and below 3.0 eV when UPS is measured on Ar‐sputtered powders. Under Haber‐Bosch reaction conditions at 5 MPa, BaAlSi and CaAlSi form hydrides, but kinetic analysis reveals that this does not alter the catalytic mechanism. Reaction orders and activation energies remain essentially unchanged, and nonhydride‐forming silicides (BaSi 2 and CaSi 2 ) show similarly high activity, indicating that hydride formation has minimal impact on catalysis. At 5 MPa, 400°C, Co/BaAlSi achieved activities of 55 mmol∙g − 1 ∙h − 1 , exceeding the commercial Fe‐based KM‐1 catalyst (41 mmol∙g − 1 ∙h − 1 ). Moreover, the BaAlSi‐ and BaSi 2 ‐supported Co and Ru catalysts achieved NH 3 production rates of 500–700 mmol∙g ( Ru/Co ) − 1 ∙h − 1 , surpassing the performance of many previously reported ammonia synthesis catalysts. Previous intermetallic catalysts for ammonia synthesis focused on specific properties such as electride nature, electron‐excess, or hydride formation; our results show that a wider range of Zintl compounds have adequately low work functions and reasonably high activities overall.
- Open Access
- 16 March 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (12) , 9961-9969
Growth of Low-Defect WSe 2 Film via High-Purity van der Waals Crystal Precursor
Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) exhibit exceptional electrical and optical properties, empowering their promising prospects for future nanoelectronics. Despite major advances in n-type 2D semiconductors, the field has yet to synthesize high-mobility p-type 2D TMDs, in particular WSe2, and systematically query the influence of defects. In this study, we unveil the pivotal role of substitutional impurity defects vis-à-vis the precursor used and growth method employed in defining the quality of 2D p-type WSe2. Density functional theory calculations suggest the adverse effect of Fe-, Co-, Ni- and Si-substituted W impurity defects on the mobility of WSe2, whereas defects such as O-, S-substituted Se and Mo-substituted W pose negligible impact. Guided by the theory, we pinpoint van der Waals (vdW) crystals, commonly used in mechanical exfoliation, as the optimal precursor, and develop a facile vdW crystal physical vapor deposition (PVD) method to grow high-purity monolayer 2D WSe2 film (VPVD-WSe2) that is continuous across a centimeter scale. A suite of spectroscopies confirms the markedly reduced defect density of the as-synthesized WSe2 compared to those by typical chemical vapor deposition methods, and by PVD with commercial or hydrothermal precursors. Scanning tunneling microscopy further evidence the ultralow substitutional impurity defect density of VPVD-WSe2, greatly outperforming the control samples and approaching the mechanically exfoliated counterparts. The VPVD-WSe2 based field-effect transistors exhibit notable electrical performance with record-high field-effect hole mobility up to 112 cm2 V-1s-1 at room temperature, exceeding the best-reported monolayer WSe2 synthesized by chemical vapor deposition and rivaling the mechanically exfoliated 2D WSe2 flakes.
- 16 March 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (12) , 9961-9969
Open AccessGrowth of Low-Defect WSe 2 Film via High-Purity van der Waals Crystal Precursor
Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) exhibit exceptional electrical and optical properties, empowering their promising prospects for future nanoelectronics. Despite major advances in n-type 2D semiconductors, the field has yet to synthesize high-mobility p-type 2D TMDs, in particular WSe2, and systematically query the influence of defects. In this study, we unveil the pivotal role of substitutional impurity defects vis-à-vis the precursor used and growth method employed in defining the quality of 2D p-type WSe2. Density functional theory calculations suggest the adverse effect of Fe-, Co-, Ni- and Si-substituted W impurity defects on the mobility of WSe2, whereas defects such as O-, S-substituted Se and Mo-substituted W pose negligible impact. Guided by the theory, we pinpoint van der Waals (vdW) crystals, commonly used in mechanical exfoliation, as the optimal precursor, and develop a facile vdW crystal physical vapor deposition (PVD) method to grow high-purity monolayer 2D WSe2 film (VPVD-WSe2) that is continuous across a centimeter scale. A suite of spectroscopies confirms the markedly reduced defect density of the as-synthesized WSe2 compared to those by typical chemical vapor deposition methods, and by PVD with commercial or hydrothermal precursors. Scanning tunneling microscopy further evidence the ultralow substitutional impurity defect density of VPVD-WSe2, greatly outperforming the control samples and approaching the mechanically exfoliated counterparts. The VPVD-WSe2 based field-effect transistors exhibit notable electrical performance with record-high field-effect hole mobility up to 112 cm2 V-1s-1 at room temperature, exceeding the best-reported monolayer WSe2 synthesized by chemical vapor deposition and rivaling the mechanically exfoliated 2D WSe2 flakes.
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
Steering interfacial molecular structures by substrate–molecule charge transfer
Porphyrin-templated C 60 stripes on Ag(111) enhance substrate-to-molecule charge transfer by reducing lateral Coulomb repulsion, demonstrating that nanoscale molecular packing can be used to engineer interfacial electronic properties.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
Open AccessSteering interfacial molecular structures by substrate–molecule charge transfer
Porphyrin-templated C 60 stripes on Ag(111) enhance substrate-to-molecule charge transfer by reducing lateral Coulomb repulsion, demonstrating that nanoscale molecular packing can be used to engineer interfacial electronic properties.
- Open Access
- 2 June 2025
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 125 (12) , 5830-5847
Probing Molecular Properties at Atomic Length Scale Using Charge-State Control
The charge state plays a critical role in governing the structural, electronic, and chemical properties of molecules. Controlling the charge state of individual molecules provides a powerful tool for exploring fundamental processes, such as redox reactions, selective bond rearrangements, molecular excitations, charge transfer, and modulation of reaction pathways at the single-molecule level. Recent advancements in scanning tunneling microscopy (STM) and atomic force microscopy (AFM) have enabled precise and stable manipulation of molecular charge states, allowing for detailed, high-resolution studies of charge-state-dependent phenomena. In this review, we discuss the principles and methodologies for charge-state control in STM and AFM, with a focus on strategies for stabilizing charge states in a controlled experimental environment. We also examine key advancements in the ability to detect and manipulate intra- and intermolecular charge transfer, providing insights into charge-mediated processes, such as structural rearrangements, electronic states, and reactivity at the atomic scale. Finally, we highlight the potential of charge-state control to probe electronic excited states and resolve spin-coherence in individual molecules.
- 2 June 2025
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 125 (12) , 5830-5847
Open AccessProbing Molecular Properties at Atomic Length Scale Using Charge-State Control
The charge state plays a critical role in governing the structural, electronic, and chemical properties of molecules. Controlling the charge state of individual molecules provides a powerful tool for exploring fundamental processes, such as redox reactions, selective bond rearrangements, molecular excitations, charge transfer, and modulation of reaction pathways at the single-molecule level. Recent advancements in scanning tunneling microscopy (STM) and atomic force microscopy (AFM) have enabled precise and stable manipulation of molecular charge states, allowing for detailed, high-resolution studies of charge-state-dependent phenomena. In this review, we discuss the principles and methodologies for charge-state control in STM and AFM, with a focus on strategies for stabilizing charge states in a controlled experimental environment. We also examine key advancements in the ability to detect and manipulate intra- and intermolecular charge transfer, providing insights into charge-mediated processes, such as structural rearrangements, electronic states, and reactivity at the atomic scale. Finally, we highlight the potential of charge-state control to probe electronic excited states and resolve spin-coherence in individual molecules.
- Open Access
- 19 March 2025
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 7 (4) , 1421-1430
On-Surface Reactions of Electronically Active Self-Assembled Monolayers for Electrode Work Function Tuning
- 19 March 2025
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 7 (4) , 1421-1430
Open AccessOn-Surface Reactions of Electronically Active Self-Assembled Monolayers for Electrode Work Function Tuning
- 18 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (30) , 39728-39736
Tuning Hole-Injection in Organic-Light Emitting Diodes with Self-Assembled Monolayers
Improving hole injection through the surface modification of indium tin oxide (ITO) with self-assembled monolayers (SAMs) is a promising method for modulating the carrier injection in organic light-emitting diodes (OLEDs). However, developing SAMs with the required characteristics remains a daunting challenge. Herein, we functionalize ITO with various phosphonic acid SAMs and evaluate the SAM-modified anodes in terms of their work function (WF), molecular distribution, coverage, and electrical conductivity. We fabricate and characterize green phosphorescent SAM-based OLEDs and compared their performance against devices based on the conventional poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) hole-injection layer. We find that the usage of [2-(3,6-diiodo-9H-carbazol-9-yl)ethyl]phosphonic acid (I-2PACz) SAM yields devices with superior performance characteristics, including a maximum luminance of ∼57,300 cd m-2 and external quantum efficiency of up to ∼17%. This improvement is attributed to synergistic factors, including the deep WF of ITO/I-2PACz (5.47 eV), the formation of larger I-2PACz molecular clusters, and the intrinsic I-2PACz dipole, that collectively enhance hole-injection.
- 18 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (30) , 39728-39736
Tuning Hole-Injection in Organic-Light Emitting Diodes with Self-Assembled Monolayers
Improving hole injection through the surface modification of indium tin oxide (ITO) with self-assembled monolayers (SAMs) is a promising method for modulating the carrier injection in organic light-emitting diodes (OLEDs). However, developing SAMs with the required characteristics remains a daunting challenge. Herein, we functionalize ITO with various phosphonic acid SAMs and evaluate the SAM-modified anodes in terms of their work function (WF), molecular distribution, coverage, and electrical conductivity. We fabricate and characterize green phosphorescent SAM-based OLEDs and compared their performance against devices based on the conventional poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) hole-injection layer. We find that the usage of [2-(3,6-diiodo-9H-carbazol-9-yl)ethyl]phosphonic acid (I-2PACz) SAM yields devices with superior performance characteristics, including a maximum luminance of ∼57,300 cd m-2 and external quantum efficiency of up to ∼17%. This improvement is attributed to synergistic factors, including the deep WF of ITO/I-2PACz (5.47 eV), the formation of larger I-2PACz molecular clusters, and the intrinsic I-2PACz dipole, that collectively enhance hole-injection.
- Top Cited Papers
- 15 July 2022
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 377 (6603) , 298-301
Selectivity in single-molecule reactions by tip-induced redox chemistry
Controlling selectivity of reactions is an ongoing quest in chemistry. In this work, we demonstrate reversible and selective bond formation and dissociation promoted by tip-induced reduction-oxidation reactions on a surface. Molecular rearrangements leading to different constitutional isomers are selected by the polarity and magnitude of applied voltage pulses from the tip of a combined scanning tunneling and atomic force microscope. Characterization of voltage dependence of the reactions and determination of reaction rates demonstrate selectivity in constitutional isomerization reactions and provide insight into the underlying mechanisms. With support of density functional theory calculations, we find that the energy landscape of the isomers in different charge states is important to rationalize the selectivity. Tip-induced selective single-molecule reactions increase our understanding of redox chemistry and could lead to novel molecular machines.
- 15 July 2022
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 377 (6603) , 298-301
Top Cited PapersSelectivity in single-molecule reactions by tip-induced redox chemistry
Controlling selectivity of reactions is an ongoing quest in chemistry. In this work, we demonstrate reversible and selective bond formation and dissociation promoted by tip-induced reduction-oxidation reactions on a surface. Molecular rearrangements leading to different constitutional isomers are selected by the polarity and magnitude of applied voltage pulses from the tip of a combined scanning tunneling and atomic force microscope. Characterization of voltage dependence of the reactions and determination of reaction rates demonstrate selectivity in constitutional isomerization reactions and provide insight into the underlying mechanisms. With support of density functional theory calculations, we find that the energy landscape of the isomers in different charge states is important to rationalize the selectivity. Tip-induced selective single-molecule reactions increase our understanding of redox chemistry and could lead to novel molecular machines.
- Open Access
Selectivity in single-molecule reactions by tip-induced redox chemistry
Controlling selectivity of reactions is a quest in chemistry. Here, we demonstrate reversible and selective bond formation and dissociation promoted by tip-induced reduction-oxidation reactions on a surface. Molecular rearrangements leading to different constitutional isomers are selected by the polarity and magnitude of applied voltage pulses from the tip of a combined scanning tunneling and atomic force microscope. Characterization of voltage dependence of the reactions and determination of reaction rates demonstrate selectivity in constitutional isomerization reactions and provide insight into the underlying mechanisms. With support of density functional theory calculations, we find that the energy landscape of the isomers in different charge states is important to rationalize the selectivity. Tip-induced selective single-molecule reactions increase our understanding of redox chemistry and could lead to novel molecular machines.
Open AccessSelectivity in single-molecule reactions by tip-induced redox chemistry
Controlling selectivity of reactions is a quest in chemistry. Here, we demonstrate reversible and selective bond formation and dissociation promoted by tip-induced reduction-oxidation reactions on a surface. Molecular rearrangements leading to different constitutional isomers are selected by the polarity and magnitude of applied voltage pulses from the tip of a combined scanning tunneling and atomic force microscope. Characterization of voltage dependence of the reactions and determination of reaction rates demonstrate selectivity in constitutional isomerization reactions and provide insight into the underlying mechanisms. With support of density functional theory calculations, we find that the energy landscape of the isomers in different charge states is important to rationalize the selectivity. Tip-induced selective single-molecule reactions increase our understanding of redox chemistry and could lead to novel molecular machines.