Bernd Willers
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bernd Willers has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Sven Eckert
Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf
23 shared publications G. Gerbeth
6 shared publications- Kerstin Eckert
Helmholtz-Zentrum Dresden-Rossendorf
5 shared publications Dirk Räbiger
Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf, 01314 Dresden, Germany
4 shared publications- Dennis Schurmann
Helmholtz-Zentrum Dresden-Rossendorf e.V. (HZDR)
3 shared publications - Vladimir Galindo
Helmholtz-Zentrum Dresden-Rossendorf
3 shared publications
Latest Publications
- 1 November 2019
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 51 (1) , 61-78
Impact of the Electromagnetic Brake Position on the Flow Structure in a Slab Continuous Casting Mold: An Experimental Parameter Study
- 1 November 2019
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 51 (1) , 61-78
Impact of the Electromagnetic Brake Position on the Flow Structure in a Slab Continuous Casting Mold: An Experimental Parameter Study
- 9 January 2019
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 50 (2) , 716-731
Experimental Study of the Mold Flow Induced by a Swirling Flow Nozzle and Electromagnetic Stirring for Continuous Casting of Round Blooms
- 9 January 2019
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 50 (2) , 716-731
Experimental Study of the Mold Flow Induced by a Swirling Flow Nozzle and Electromagnetic Stirring for Continuous Casting of Round Blooms
- Open Access
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012039
Effect of time–modulated magnetic fields on the solidification structure and extrusion properties of wrought aluminum alloys
Wrought aluminum alloys and in particular extruded products have a large economic importance worldwide. The opportunities to increase the quality or to reduce the production cost have great a strong finance and ecologic incentive. AC magnetic fields provide the possibility to influence the melt flow in a contactless way to influence the temperature and solute distribution in front of the solidification front. Many studies have shown the beneficial effects like a distinct grain refinement or the promotion of a transition from a columnar to an equiaxed dendritic growth (CET). The use of time-modulated magnetic fields are able to avoid segregation effects, just like known from privies studies they work with permanent rotating magnetic fields, for example. This present study examines the directional solidification of commercial wrought aluminum alloys from a water-cooled copper chill. Rotating time-modulated magnetic fields were used to agitate the melt. Our results demonstrate the potential of time-modulated magnetic fields to control the grain size, the formation of intermetallic phases and extrusion properties.
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012039
Open AccessEffect of time–modulated magnetic fields on the solidification structure and extrusion properties of wrought aluminum alloys
Wrought aluminum alloys and in particular extruded products have a large economic importance worldwide. The opportunities to increase the quality or to reduce the production cost have great a strong finance and ecologic incentive. AC magnetic fields provide the possibility to influence the melt flow in a contactless way to influence the temperature and solute distribution in front of the solidification front. Many studies have shown the beneficial effects like a distinct grain refinement or the promotion of a transition from a columnar to an equiaxed dendritic growth (CET). The use of time-modulated magnetic fields are able to avoid segregation effects, just like known from privies studies they work with permanent rotating magnetic fields, for example. This present study examines the directional solidification of commercial wrought aluminum alloys from a water-cooled copper chill. Rotating time-modulated magnetic fields were used to agitate the melt. Our results demonstrate the potential of time-modulated magnetic fields to control the grain size, the formation of intermetallic phases and extrusion properties.
- Open Access
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012005
Experimental study on the behaviour of the submerged jet in a cold liquid metal model for continuous casting of round blooms under the influence of rotating magnetic fields
Experimental results were obtained at the Mini-LIMMCAST facility [1], an experimental setup to model continuous casting of steel operated continuously as a loop with the cold liquid metal alloy GaInSn. The setup consists of a round mould with an inner diameter of 80 mm, representing a mould used in industrial bloom casting in a scale of 1:3. A mould-electromagnetic-stirrer (M-EMS) generated a rotating magnetic field (RMF) with different magnetic flux densities. Velocity profiles inside the mould were measured by Ultrasound Doppler Velocimetry (UDV). The experiments revealed an unexpected behaviour of the submerged jet: for medium magnetic field strengths of the RMF it can be observed, that the jet stops circling and stays at one position in the mould, bearing the risk of breakout due to continuous impingement of superheated material to one position of the solidified shell.
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012005
Open AccessExperimental study on the behaviour of the submerged jet in a cold liquid metal model for continuous casting of round blooms under the influence of rotating magnetic fields
Experimental results were obtained at the Mini-LIMMCAST facility [1], an experimental setup to model continuous casting of steel operated continuously as a loop with the cold liquid metal alloy GaInSn. The setup consists of a round mould with an inner diameter of 80 mm, representing a mould used in industrial bloom casting in a scale of 1:3. A mould-electromagnetic-stirrer (M-EMS) generated a rotating magnetic field (RMF) with different magnetic flux densities. Velocity profiles inside the mould were measured by Ultrasound Doppler Velocimetry (UDV). The experiments revealed an unexpected behaviour of the submerged jet: for medium magnetic field strengths of the RMF it can be observed, that the jet stops circling and stays at one position in the mould, bearing the risk of breakout due to continuous impingement of superheated material to one position of the solidified shell.
- 1 January 2017
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 57 (3) , 468-477
Experimental Investigations of Rotary Electromagnetic Mould Stirring in Continuous Casting Using a Cold Liquid Metal Model
- 1 January 2017
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 57 (3) , 468-477
Experimental Investigations of Rotary Electromagnetic Mould Stirring in Continuous Casting Using a Cold Liquid Metal Model
- Open Access
- 1 July 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 143 (1) , 012027
Numeric simulations of a liquid metal model of a bloom caster under the effect of rotary electromagnetic stirring
At the voestalpine Stahl Donawitz GmbH the continuous casting of round steel blooms is commonly supported by electromagnetically induced stirring of the liquid steel flow. A number of beneficial effects are attributed to electromagnetic stirring in the mould region (M-EMS), e.g. the enhanced transition from columnar to equiaxed solidification, the homogenization of the liquid steel flow or the reduction of surface and subsurface defects. Although the positive effects of M-EMS can be seen on the blooms (e.g. in etchings), the link between electromagnetic stirring of the steel melt and the quality of the solidified bloom is not sufficiently understood. Theoretical considerations are often limited to general cases and their results are therefore not directly applicable to real continuous casting geometries. On the other hand, plant measurements can only be performed to a limited extent due to the harsh conditions and other restrictions (e.g. safety regulations). In this work an alternative approach is used to investigate the steel flow in a round bloom caster under the influence of M-EMS. In a 1:3 scale Perspex model of a round bloom strand, measurements of the flow under the influence of a rotating magnetic field can be conducted. These measurements provide a validation benchmark for the numeric simulations. A numeric model of the before mentioned 1:3 scale model is implemented, encompassing the strand, the submerged entry nozzle as well as the M-EMS device. In the modelling approach, the bidirectional coupling between liquid steel flow and the electromagnetic field/forces has to be considered because otherwise the resulting tangential velocities will be overestimated. With the validated modelling approach, simulations of real casting machines can then be conducted, stirring parameter influences can be shown and conclusions for the real casting process can be drawn.
- 1 July 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 143 (1) , 012027
Open AccessNumeric simulations of a liquid metal model of a bloom caster under the effect of rotary electromagnetic stirring
At the voestalpine Stahl Donawitz GmbH the continuous casting of round steel blooms is commonly supported by electromagnetically induced stirring of the liquid steel flow. A number of beneficial effects are attributed to electromagnetic stirring in the mould region (M-EMS), e.g. the enhanced transition from columnar to equiaxed solidification, the homogenization of the liquid steel flow or the reduction of surface and subsurface defects. Although the positive effects of M-EMS can be seen on the blooms (e.g. in etchings), the link between electromagnetic stirring of the steel melt and the quality of the solidified bloom is not sufficiently understood. Theoretical considerations are often limited to general cases and their results are therefore not directly applicable to real continuous casting geometries. On the other hand, plant measurements can only be performed to a limited extent due to the harsh conditions and other restrictions (e.g. safety regulations). In this work an alternative approach is used to investigate the steel flow in a round bloom caster under the influence of M-EMS. In a 1:3 scale Perspex model of a round bloom strand, measurements of the flow under the influence of a rotating magnetic field can be conducted. These measurements provide a validation benchmark for the numeric simulations. A numeric model of the before mentioned 1:3 scale model is implemented, encompassing the strand, the submerged entry nozzle as well as the M-EMS device. In the modelling approach, the bidirectional coupling between liquid steel flow and the electromagnetic field/forces has to be considered because otherwise the resulting tangential velocities will be overestimated. With the validated modelling approach, simulations of real casting machines can then be conducted, stirring parameter influences can be shown and conclusions for the real casting process can be drawn.
- Open Access
- 1 July 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 143 (1) , 012021
Experimental study on directional solidification of Al-Si alloys under the influence of electric currents
The application of electric currents during solidification can cause grain refinement in metallic alloys. However, the knowledge about the mechanisms underlying the decrease in grain size remains fragmentary. This study considers the solidification of Al-Si alloys under the influence of electric currents for the configuration of two parallel electrodes at the free surface. Solidification experiments were performed under the influence of both direct currents (DC) and rectangular electric current pulses (ECP). The interaction between the applied current and its own induced magnetic field causes a Lorentz force which produces an electro-vortex flow. Numerical simulations were conducted to calculate the Lorentz force, the Joule heating and the induced melt flow. The numerical predictions were confirmed by isothermal flow measurements in eutectic GaInSn. The results demonstrate that the grain refining effect observed in our experiments can be ascribed solely to the forced melt flow driven by the Lorentz force.
- 1 July 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 143 (1) , 012021
Open AccessExperimental study on directional solidification of Al-Si alloys under the influence of electric currents
The application of electric currents during solidification can cause grain refinement in metallic alloys. However, the knowledge about the mechanisms underlying the decrease in grain size remains fragmentary. This study considers the solidification of Al-Si alloys under the influence of electric currents for the configuration of two parallel electrodes at the free surface. Solidification experiments were performed under the influence of both direct currents (DC) and rectangular electric current pulses (ECP). The interaction between the applied current and its own induced magnetic field causes a Lorentz force which produces an electro-vortex flow. Numerical simulations were conducted to calculate the Lorentz force, the Joule heating and the induced melt flow. The numerical predictions were confirmed by isothermal flow measurements in eutectic GaInSn. The results demonstrate that the grain refining effect observed in our experiments can be ascribed solely to the forced melt flow driven by the Lorentz force.
- 9 June 2016
- Published by Taylor & Francis in International Journal of Cast Metals Research
- Vol. 30 (1) , 13-19
The effect of pulsed electrical currents on the formation of macrosegregation in solidifying Al–Si hypoeutectic phases
Within this study, we conducted experimental investigations focusing on the formation of macrosegregation in Al-7wt-%Si alloys exposed to electric current pulses (ECP) during solidification. The distribution of eutectic phase was measured on various sections of the solidified samples. The results do not show the formation of reproducible segregation pattern. This finding can be attributed to the specific pattern and the turbulent character of the flow generated by the ECP treatment, the equiaxed growth of free-moving crystals and a non-symmetric distribution of the electromagnetic force due to an uneven wetting of the electrodes. An increasing input of energy by ECP intensifies the melt flow and increases the variations of phase distribution over a longitudinal section.
- 9 June 2016
- Published by Taylor & Francis in International Journal of Cast Metals Research
- Vol. 30 (1) , 13-19
The effect of pulsed electrical currents on the formation of macrosegregation in solidifying Al–Si hypoeutectic phases
Within this study, we conducted experimental investigations focusing on the formation of macrosegregation in Al-7wt-%Si alloys exposed to electric current pulses (ECP) during solidification. The distribution of eutectic phase was measured on various sections of the solidified samples. The results do not show the formation of reproducible segregation pattern. This finding can be attributed to the specific pattern and the turbulent character of the flow generated by the ECP treatment, the equiaxed growth of free-moving crystals and a non-symmetric distribution of the electromagnetic force due to an uneven wetting of the electrodes. An increasing input of energy by ECP intensifies the melt flow and increases the variations of phase distribution over a longitudinal section.
- 1 January 2016
- Published by Springer Nature
- p. 19-26
Liquid Metal Modelling of Flow Phenomena in the Continuous Casting Process of Steel
- 1 January 2016
- Published by Springer Nature
- p. 19-26
Liquid Metal Modelling of Flow Phenomena in the Continuous Casting Process of Steel
- 1 October 2014
- Published by Elsevier in Acta Materialia
- Vol. 79, 327-338
The relevance of melt convection to grain refinement in Al–Si alloys solidified under the impact of electric currents
- 1 October 2014
- Published by Elsevier in Acta Materialia
- Vol. 79, 327-338
The relevance of melt convection to grain refinement in Al–Si alloys solidified under the impact of electric currents