Kun-Mo Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kun-Mo Lin has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Jong-Shinn Wu
Department of Mechanical Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
6 shared publications C.-T. Hung
Department of Mechanical Engineering, National Chiao Tung University, Hsinchu, Taiwan
4 shared publicationsC-T Hung
National Chiao Tung University
2 shared publications- Cheng-Hang Cheng
Mechanical Engineering, National Chung Cheng University, Minhsiung, TAIWAN
2 shared publications - Chia-Chun Ou
Department of Mechanical Engineering, National Chung Cheng University, Taiwan, Republic of China
2 shared publications Chieh-Tsan Hung
2 shared publications
Latest Publications
- 29 October 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 288
Study on ozone-assisted combustion characteristics and emissions of a spark-ignition engine
- 29 October 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 288
Study on ozone-assisted combustion characteristics and emissions of a spark-ignition engine
- 23 September 2026
- Published by Wiley in Plasma Processes and Polymers
- Vol. 23 (9) , e70261
Memory Effects of the Ionization Wave Generated by an Atmospheric‐Pressure Helium Plasma Jet in Air
This work investigates competing memory effects associated with surface‐charge‐induced electric field enhancement and residual‐space‐charge‐induced field shielding in a helium atmospheric‐pressure plasma jet (APPJ) using numerical simulations validated by experiments. A numerical model integrating a 2D axisymmetric plasma fluid model with a gas flow model is developed to capture the dynamics of the ionization wave generated. The simulated results of charge‐removal numerical experiments indicate that surface charges dominate the discharge ignition in the positive HP, whereas residual space charges suppress discharge formation due to the shielding of the electric field in the negative HP, leading to the observed asymmetric discharge current. These findings provide physical insight into polarity‐dependent memory effects and discharge control in APPJs.
- 23 September 2026
- Published by Wiley in Plasma Processes and Polymers
- Vol. 23 (9) , e70261
Memory Effects of the Ionization Wave Generated by an Atmospheric‐Pressure Helium Plasma Jet in Air
This work investigates competing memory effects associated with surface‐charge‐induced electric field enhancement and residual‐space‐charge‐induced field shielding in a helium atmospheric‐pressure plasma jet (APPJ) using numerical simulations validated by experiments. A numerical model integrating a 2D axisymmetric plasma fluid model with a gas flow model is developed to capture the dynamics of the ionization wave generated. The simulated results of charge‐removal numerical experiments indicate that surface charges dominate the discharge ignition in the positive HP, whereas residual space charges suppress discharge formation due to the shielding of the electric field in the negative HP, leading to the observed asymmetric discharge current. These findings provide physical insight into polarity‐dependent memory effects and discharge control in APPJs.
- Open Access
- 1 November 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (11) , 115008
Characterization of O 3 species in a planar atmospheric pressure dielectric barrier discharge reactor using Ar/O 2 mixtures by a microsecond unipolar pulsed power source
This work investigates the O 3 generated in a planar atmospheric pressure dielectric barrier discharge (APDBD) reactor using Ar/0.5% O 2 as the working mixture with a microsecond pulsed power to analyze detailed species and reaction variations in the discharge zone. The numerical model integrates both the 1D plasma fluid model (PFM) and 3D gas flow model (GFM) to predict the O 3 generation in conjunction with the analysis of dominant species and mechanisms. The discharge uniformity is confirmed by the ICCD photograph taken, which justifies the implementation of the 1D PFM. The experimental measurements validate the simulated current, power consumption, reactor surface temperature, and O 3 concentrations at different regions. The uniform APDBDs using Ar/O 2 mixtures provide a simplified platform for exploring reaction mechanisms in Ar discharges under atmospheric pressure in contrast to their typical filamentary features. The analysis shows that atomic oxygen is the dominant species of O 3 generation, while excited oxygen molecules (i.e. O 2 (a) and O 2 (b)) are the dominant species of O 3 consumption. The variations of dominant generation and consumption reaction distributions reveal detailed interactions among species presented, leading to the differences between those predicted by the 1D PFM with all reactions and the integration of 1D PFM and 3D GFM. The developed numerical model provides an appropriate process considering both discharge dynamics and species transport behavior to predict variations of reactive species generated in the discharge zone.
- 1 November 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (11) , 115008
Open AccessCharacterization of O 3 species in a planar atmospheric pressure dielectric barrier discharge reactor using Ar/O 2 mixtures by a microsecond unipolar pulsed power source
This work investigates the O 3 generated in a planar atmospheric pressure dielectric barrier discharge (APDBD) reactor using Ar/0.5% O 2 as the working mixture with a microsecond pulsed power to analyze detailed species and reaction variations in the discharge zone. The numerical model integrates both the 1D plasma fluid model (PFM) and 3D gas flow model (GFM) to predict the O 3 generation in conjunction with the analysis of dominant species and mechanisms. The discharge uniformity is confirmed by the ICCD photograph taken, which justifies the implementation of the 1D PFM. The experimental measurements validate the simulated current, power consumption, reactor surface temperature, and O 3 concentrations at different regions. The uniform APDBDs using Ar/O 2 mixtures provide a simplified platform for exploring reaction mechanisms in Ar discharges under atmospheric pressure in contrast to their typical filamentary features. The analysis shows that atomic oxygen is the dominant species of O 3 generation, while excited oxygen molecules (i.e. O 2 (a) and O 2 (b)) are the dominant species of O 3 consumption. The variations of dominant generation and consumption reaction distributions reveal detailed interactions among species presented, leading to the differences between those predicted by the 1D PFM with all reactions and the integration of 1D PFM and 3D GFM. The developed numerical model provides an appropriate process considering both discharge dynamics and species transport behavior to predict variations of reactive species generated in the discharge zone.
- 4 April 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (16) , 8766-8773
Investigation of OH Species in a Helium Atmospheric Pressure Plasma Jet: from Gas Phase to Liquid Phase through the Plasma–Liquid Interface
This work develops a semiempirical 1D numerical model with average measured [•OH(g)] (denoted as [•OH(g)]M) as the boundary condition and measured [•OH(aq)] (denoted as [•OH(aq)]M) to calibrate the accumulated [•OH(aq)] modeled (denoted as [•OH(aq)]S) in the solution treated by a plasma jet. The [•OH(g)]M obtained in the plasma plume is integrated from the [•OH(g)] distribution detected in the radial direction at position 1 mm above the interface. The [•OH(aq)]M in the solutions is determined from the fluorescence measurements by exciting 2-hydroxyterephthalic acid at 310 nm and detecting the fluorescence emitted at 425 nm for cases with different plasma treatment times. The developed numerical model considers both the diffusion and convection for the domain covering 1 mm above the interface with the dominant generation and consumption mechanisms considered in the discharge plume to evaluate the incoming flux of •OH(g) through the interface, which is calibrated with [•OH(aq)]M in the solution treated. The simulated results show that the transport behavior (i.e., diffusion and convection) plays only a minor role in the contribution of [•OH(aq)]S, while the electron-impact dissociation reactions play significant roles in the generation of •OH(g) in the discharge plume, leading to the high local [•OH(g)] and incoming flux of •OH(g) to the interface. The self-association reactions of •OH(g) contribute to the remarkable consumption of •OH(g). The simulated [•OH(g)] distribution increases from the [•OH(g)]M determined at the upstream boundary to its maximum near the central region as the density reaches 9.5 × 1019 m-3 and decreases rapidly above the interface.
- 4 April 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (16) , 8766-8773
Investigation of OH Species in a Helium Atmospheric Pressure Plasma Jet: from Gas Phase to Liquid Phase through the Plasma–Liquid Interface
This work develops a semiempirical 1D numerical model with average measured [•OH(g)] (denoted as [•OH(g)]M) as the boundary condition and measured [•OH(aq)] (denoted as [•OH(aq)]M) to calibrate the accumulated [•OH(aq)] modeled (denoted as [•OH(aq)]S) in the solution treated by a plasma jet. The [•OH(g)]M obtained in the plasma plume is integrated from the [•OH(g)] distribution detected in the radial direction at position 1 mm above the interface. The [•OH(aq)]M in the solutions is determined from the fluorescence measurements by exciting 2-hydroxyterephthalic acid at 310 nm and detecting the fluorescence emitted at 425 nm for cases with different plasma treatment times. The developed numerical model considers both the diffusion and convection for the domain covering 1 mm above the interface with the dominant generation and consumption mechanisms considered in the discharge plume to evaluate the incoming flux of •OH(g) through the interface, which is calibrated with [•OH(aq)]M in the solution treated. The simulated results show that the transport behavior (i.e., diffusion and convection) plays only a minor role in the contribution of [•OH(aq)]S, while the electron-impact dissociation reactions play significant roles in the generation of •OH(g) in the discharge plume, leading to the high local [•OH(g)] and incoming flux of •OH(g) to the interface. The self-association reactions of •OH(g) contribute to the remarkable consumption of •OH(g). The simulated [•OH(g)] distribution increases from the [•OH(g)]M determined at the upstream boundary to its maximum near the central region as the density reaches 9.5 × 1019 m-3 and decreases rapidly above the interface.
- Open Access
- 1 June 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (6) , 065005
Characterization of OH species in kHz air/H2O atmospheric pressure dielectric barrier discharges
This work numerically studies densities and reaction mechanisms of OH species generated in atmospheric–pressure air dielectric barrier discharges with the model validated by experiments. The power consumption is measured, and the number of microdischarges (MDs) generated within a half period is captured by an intensified charge-coupled device (CCD) camera. The OH densities of cases with various H2O concentrations are measured using ultraviolet absorption spectroscopy. The numerical model integrating the 1.5D discharge fluid model and 3D background gas model (BGM) is adopted to predict the MD behavior and the generation of species related to OH generation. The simulated OH densities cover the range of 1.1 × 1019 and 1.6 × 1019 m−3 in the cases studied, agreeing with those measured. The simulated results show that most OH radicals are generated in MDs, while the reactive section contributes around 2% of the total OH generation. The detailed analysis shows that atomic oxygen (O(1D) and O) and O3 contribute most of the OH generation in the MDs. In contrast, the self-association reactions (i.e. 2OH + M → H2O2 + M and 2OH → O + H2O) and NO x species consume more than 64% of OH radicals generated in MDs. In the BGM, it is interesting to find that reactive species NO x play significant roles in both the OH generation and depletion in the reactive section. The distributions of species related to the OH species obtained by the BGM are presented to elucidate the detailed chemistry of OH species in the reactive section.
- 1 June 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (6) , 065005
Open AccessCharacterization of OH species in kHz air/H2O atmospheric pressure dielectric barrier discharges
This work numerically studies densities and reaction mechanisms of OH species generated in atmospheric–pressure air dielectric barrier discharges with the model validated by experiments. The power consumption is measured, and the number of microdischarges (MDs) generated within a half period is captured by an intensified charge-coupled device (CCD) camera. The OH densities of cases with various H2O concentrations are measured using ultraviolet absorption spectroscopy. The numerical model integrating the 1.5D discharge fluid model and 3D background gas model (BGM) is adopted to predict the MD behavior and the generation of species related to OH generation. The simulated OH densities cover the range of 1.1 × 1019 and 1.6 × 1019 m−3 in the cases studied, agreeing with those measured. The simulated results show that most OH radicals are generated in MDs, while the reactive section contributes around 2% of the total OH generation. The detailed analysis shows that atomic oxygen (O(1D) and O) and O3 contribute most of the OH generation in the MDs. In contrast, the self-association reactions (i.e. 2OH + M → H2O2 + M and 2OH → O + H2O) and NO x species consume more than 64% of OH radicals generated in MDs. In the BGM, it is interesting to find that reactive species NO x play significant roles in both the OH generation and depletion in the reactive section. The distributions of species related to the OH species obtained by the BGM are presented to elucidate the detailed chemistry of OH species in the reactive section.
- 24 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (2) , 295-297
Special Issue on the APSPT 2021
The Asia–Pacific International Symposium on the Basics and Applications of Plasma Technology (APSPT) is held in Taiwan or Japan every two to four years since 1997. It is an important and great platform for scientists all around the world sharing research findings in the field of plasma science and technology. The 12th APSPT was held on December 9–11, 2021, at the National Taiwan University of Science and Technology (NTUST) in Taipei, Taiwan. There are 260 papers contributed by participants from 13 countries.
- 24 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (2) , 295-297
Special Issue on the APSPT 2021
The Asia–Pacific International Symposium on the Basics and Applications of Plasma Technology (APSPT) is held in Taiwan or Japan every two to four years since 1997. It is an important and great platform for scientists all around the world sharing research findings in the field of plasma science and technology. The 12th APSPT was held on December 9–11, 2021, at the National Taiwan University of Science and Technology (NTUST) in Taipei, Taiwan. There are 260 papers contributed by participants from 13 countries.
- 1 February 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (2) , 025007
Analysis of ozone generation in a planar atmospheric pressure air dielectric barrier discharge reactor
This work investigates O3 production in a planar atmospheric pressure air dielectric barrier discharge reactor numerically and experimentally. The surface temperature of the reactor is measured by an infrared (IR) thermal imager, and the O3 densities of cases in the reactive zone are measured by ultraviolet absorption spectroscopy. The 1.5D plasma fluid model (PFM) with transverse convection is employed to capture the average properties of a single microdischarge (MD) generated in the reactor. The concept of equivalent reaction is proposed to calculate spatial-cyclic average species sources obtained by the 1.5D PFM and provided to the chemical model of a 3D gas flow model (GFM) for obtaining density distributions of reactive species generated by MDs in the reactive zone. The simulated temperature distribution of the reactor surface is validated by that measured with the IR thermal imager since the gas temperature was reported as a critical discharge parameter for O3 generation. The simulated O3 densities show the same trend as the flow rate changes, which demonstrates the proposed model captures the average discharge dynamics in different operating conditions. In the 1.5D PFM, the simulated results show that the O3 molecules produced in the case of 4 SLM are much more than those produced in the case of 1 SLM though the O atoms produced in the case of 1 SLM are around 20% more than those produced in the case of 4 SLM. In the case of 1 SLM, more than 48% of O3 molecular generated are destructed, while only around 14% of O3 molecules are destructed in the case of 4 SLM. The analysis shows that around 73% of O atoms generated in the 1.5D PFM are consumed in the formation of O3 molecules in the case of 4 SLM, while only 18% of O atoms generated in the case of 1 SLM are consumed in the formation of O3 molecules. In the 3D GFM, the O3 destructed is around 24% of that destructed in the 1.5D PFM in the case of 4 SLM due to the oxidation reaction of NO, while only 11% of O3 molecules destructed as that destructed in the 1.5D PFM in the case of 1 SLM. The amounts of O3 molecules generated in the 3D GFM are minor if they are compared with those generated in the 1.5D PFM in all cases. The overall O3 yield efficiency reaches 97 g kWh−1 with the O3 concentration increasing up to 2700 ppm in the case of 4 SLM, while the O3 yield efficiency decreases to 10 g kWh−1 and O3 concentration drops to 1400 ppm in the case of 1 SLM.
- 1 February 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (2) , 025007
Analysis of ozone generation in a planar atmospheric pressure air dielectric barrier discharge reactor
This work investigates O3 production in a planar atmospheric pressure air dielectric barrier discharge reactor numerically and experimentally. The surface temperature of the reactor is measured by an infrared (IR) thermal imager, and the O3 densities of cases in the reactive zone are measured by ultraviolet absorption spectroscopy. The 1.5D plasma fluid model (PFM) with transverse convection is employed to capture the average properties of a single microdischarge (MD) generated in the reactor. The concept of equivalent reaction is proposed to calculate spatial-cyclic average species sources obtained by the 1.5D PFM and provided to the chemical model of a 3D gas flow model (GFM) for obtaining density distributions of reactive species generated by MDs in the reactive zone. The simulated temperature distribution of the reactor surface is validated by that measured with the IR thermal imager since the gas temperature was reported as a critical discharge parameter for O3 generation. The simulated O3 densities show the same trend as the flow rate changes, which demonstrates the proposed model captures the average discharge dynamics in different operating conditions. In the 1.5D PFM, the simulated results show that the O3 molecules produced in the case of 4 SLM are much more than those produced in the case of 1 SLM though the O atoms produced in the case of 1 SLM are around 20% more than those produced in the case of 4 SLM. In the case of 1 SLM, more than 48% of O3 molecular generated are destructed, while only around 14% of O3 molecules are destructed in the case of 4 SLM. The analysis shows that around 73% of O atoms generated in the 1.5D PFM are consumed in the formation of O3 molecules in the case of 4 SLM, while only 18% of O atoms generated in the case of 1 SLM are consumed in the formation of O3 molecules. In the 3D GFM, the O3 destructed is around 24% of that destructed in the 1.5D PFM in the case of 4 SLM due to the oxidation reaction of NO, while only 11% of O3 molecules destructed as that destructed in the 1.5D PFM in the case of 1 SLM. The amounts of O3 molecules generated in the 3D GFM are minor if they are compared with those generated in the 1.5D PFM in all cases. The overall O3 yield efficiency reaches 97 g kWh−1 with the O3 concentration increasing up to 2700 ppm in the case of 4 SLM, while the O3 yield efficiency decreases to 10 g kWh−1 and O3 concentration drops to 1400 ppm in the case of 1 SLM.
- 1 July 2022
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 31 (7) , 075005
Characterization of OH species in kHz He/H 2 O atmospheric pressure dielectric barrier discharges
This work investigates experimentally and numerically the chemical kinetics of OH species generated in kHz helium atmospheric-pressure dielectric barrier discharges with different H 2 O concentrations. The OH densities of cases are determined from measurements of the ultraviolet absorption spectroscopy (UVAS) system with transition parameters evaluated by LIFBASE. The 1D plasma fluid model (PFM) with compiled chemistry covering chemical kinetics of helium, H 2 O, and interaction reactions of reactive species including the formation of charged cluster ions is employed to capture the discharge dynamics for analyzing mechanisms of OH species properly. The simulated current densities of cases with 0.8% and 2.0% H 2 O concentrations increase from 29 to 51 A m −2 , agreeing with experimental measurements. The simulated OH density increases from 1.7 × 10 19 m −3 to 2.4 × 10 19 m −3 as the H 2 O concentration increases from 0.4% to 2.0%, agreeing with OH densities interpreted from the UVAS system for cases with various H 2 O concentrations. In general, the 1D PFM developed captures the discharge behavior and predicts the OH densities of cases with different H 2 O concentrations. The simulated results reveal that the electron and H 2 O + are essential species for OH production through dissociative reactions (e + H 2 O → e + OH + H) and (H 2 O + + H 2 O → H + (H 2 O) + OH) contributing to 61% and 23% of OH production, respectively. It is observed that the OH self-recombination reaction (OH + OH + He → H 2 O 2 + He) contributes to 32% of OH consumption as the dominant reaction. Moreover, the stepwise recombination reactions (OH + H 2 O 2 → H 2 O + HO 2 and OH + HO 2 → O 2 + H 2 O) initiated by OH species contribute to the overall 27% of OH consumption as another dominant mechanism. The Penning ionization reactions involving water molecules are the dominant reactions for electron production in the present discharge with H 2 O up to 0.8%, then the electron-impact ionization becomes the dominant reaction for electron production in cases with higher H 2 O concentrations. As the essential species contributing to the OH consumption, H species is produced majorly from the dissociation reaction (e + H 2 O → e + OH + H). As one of the dominant OH production reactions, the dissociative attachment (e + H 2 O → H − + OH) is the dominant electron consumption reaction, resulting in the reactive H − species as the source of negative cluster ions. The high average reaction rates of dissociative attachment reactions consume most of the electrons after the breakdown, which leads to the variation of discharge current density. The saturation of OH species, which is observed experimentally and numerically, is attributed to the transition of electron chemical kinetics and the recombination reactions of OH species.
- 1 July 2022
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 31 (7) , 075005
Characterization of OH species in kHz He/H 2 O atmospheric pressure dielectric barrier discharges
This work investigates experimentally and numerically the chemical kinetics of OH species generated in kHz helium atmospheric-pressure dielectric barrier discharges with different H 2 O concentrations. The OH densities of cases are determined from measurements of the ultraviolet absorption spectroscopy (UVAS) system with transition parameters evaluated by LIFBASE. The 1D plasma fluid model (PFM) with compiled chemistry covering chemical kinetics of helium, H 2 O, and interaction reactions of reactive species including the formation of charged cluster ions is employed to capture the discharge dynamics for analyzing mechanisms of OH species properly. The simulated current densities of cases with 0.8% and 2.0% H 2 O concentrations increase from 29 to 51 A m −2 , agreeing with experimental measurements. The simulated OH density increases from 1.7 × 10 19 m −3 to 2.4 × 10 19 m −3 as the H 2 O concentration increases from 0.4% to 2.0%, agreeing with OH densities interpreted from the UVAS system for cases with various H 2 O concentrations. In general, the 1D PFM developed captures the discharge behavior and predicts the OH densities of cases with different H 2 O concentrations. The simulated results reveal that the electron and H 2 O + are essential species for OH production through dissociative reactions (e + H 2 O → e + OH + H) and (H 2 O + + H 2 O → H + (H 2 O) + OH) contributing to 61% and 23% of OH production, respectively. It is observed that the OH self-recombination reaction (OH + OH + He → H 2 O 2 + He) contributes to 32% of OH consumption as the dominant reaction. Moreover, the stepwise recombination reactions (OH + H 2 O 2 → H 2 O + HO 2 and OH + HO 2 → O 2 + H 2 O) initiated by OH species contribute to the overall 27% of OH consumption as another dominant mechanism. The Penning ionization reactions involving water molecules are the dominant reactions for electron production in the present discharge with H 2 O up to 0.8%, then the electron-impact ionization becomes the dominant reaction for electron production in cases with higher H 2 O concentrations. As the essential species contributing to the OH consumption, H species is produced majorly from the dissociation reaction (e + H 2 O → e + OH + H). As one of the dominant OH production reactions, the dissociative attachment (e + H 2 O → H − + OH) is the dominant electron consumption reaction, resulting in the reactive H − species as the source of negative cluster ions. The high average reaction rates of dissociative attachment reactions consume most of the electrons after the breakdown, which leads to the variation of discharge current density. The saturation of OH species, which is observed experimentally and numerically, is attributed to the transition of electron chemical kinetics and the recombination reactions of OH species.
- Open Access
- 28 October 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (21) , 7583
Gas Heating Mechanisms in Atmospheric Pressure Helium Dielectric-Barrier Discharges Driven by a kHz Power Source
The present work investigates contributions of different heating mechanisms and power efficiency of atmospheric-pressure helium dielectric-barrier discharges (APHeDBDs) containing a small amount of N2 for temperature measurements by developing the numerical methodology combining the one-dimensional (1D) plasma fluid model (PFM) and 3D gas flow model (GFM) with simulated results validated by measurements including the discharge power consumption and temperature distribution. The discharge dynamics are modeled by the 1D PFM for evaluating the average heating source considering elastic collision, ion Joule heating, and exothermic reactions as the source term of energy equation solved in the 3D GFM. The simulated current density reaches 29 A m−2 which is close to that measured as 35 A m−2. The simulated power consumption is 2.0 W which is in good agreement with the average measured power consumption as 2.1 W. The simulated average gas temperature in the reactive zone is around 346 K which is also close to the rotational temperature determined. The analysis shows that elastic collision and ion Joule heating are dominant heating mechanisms contributing 23.9% and 65.8% to the heating source, respectively. Among ion species, N2+ and N4+ are dominant species contributing 44.1% and 50.7% to the heating source of ion Joule heating, respectively. The simulated average total heating source is around 5.6 × 105 W m−3 with the maximum reaching 3.5 × 106 W m−3 in the sheath region due to the contribution of ion Joule heating.
- 28 October 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (21) , 7583
Open AccessGas Heating Mechanisms in Atmospheric Pressure Helium Dielectric-Barrier Discharges Driven by a kHz Power Source
The present work investigates contributions of different heating mechanisms and power efficiency of atmospheric-pressure helium dielectric-barrier discharges (APHeDBDs) containing a small amount of N2 for temperature measurements by developing the numerical methodology combining the one-dimensional (1D) plasma fluid model (PFM) and 3D gas flow model (GFM) with simulated results validated by measurements including the discharge power consumption and temperature distribution. The discharge dynamics are modeled by the 1D PFM for evaluating the average heating source considering elastic collision, ion Joule heating, and exothermic reactions as the source term of energy equation solved in the 3D GFM. The simulated current density reaches 29 A m−2 which is close to that measured as 35 A m−2. The simulated power consumption is 2.0 W which is in good agreement with the average measured power consumption as 2.1 W. The simulated average gas temperature in the reactive zone is around 346 K which is also close to the rotational temperature determined. The analysis shows that elastic collision and ion Joule heating are dominant heating mechanisms contributing 23.9% and 65.8% to the heating source, respectively. Among ion species, N2+ and N4+ are dominant species contributing 44.1% and 50.7% to the heating source of ion Joule heating, respectively. The simulated average total heating source is around 5.6 × 105 W m−3 with the maximum reaching 3.5 × 106 W m−3 in the sheath region due to the contribution of ion Joule heating.