Abdelmoghit Zaarane
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abdelmoghit Zaarane has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Ibtissam Slimani
Hassan II University of Casablanca
6 shared publications Issam Atouf
6 shared publicationsAbdellatif Hamdoun
5 shared publicationsIbtissam Slimani
Hassan II-Casablanca University,LTI Lab. Faculty of Sciences Ben M’sik,Casablanca,Morocco
2 shared publications- Issam Atouf
Hassan II University of Casablanca
2 shared publications - Mourad Elhabchi
Hassan II University of Casablanca
2 shared publications
Latest Publications
- Open Access
- 1 February 2025
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 14 (1) , 216-223
Metamaterial inspired miniaturized ultra-wideband monopole hexagonal antenna with triple band-filter functions
In this letter, a new technique to the design of an ultra-wideband (UWB) monopole hexagonal antenna with triple band-rejected functions and to restrict the interferences with the exist bands is proposed, the design has the form of a hexagonal patch and a ground plane having rectangular shaped etched in the back side of the substrate to achieve the UWB behavior. The triple-band filter feature is generated by inserting a metamaterial (MTM) as a split ring resonator slots (SRRs) and a complementary split ring resonators (CSRRs) strip, thus no extra size is needed. The triple band-elimination is for 3.3-3.9 GHz centered at 3.5 GHz for 5G band, 4.99-5.4 GHz centered at 5.2 GHz for wireless local area network (WLAN) band, and 6.2-6.8 GHz centered at 6.5 GHz for IEEE INSAT/Supra-extended C-band. The antenna dimension has a compact size of 20×25×1.6 mm3. Current distribution on the antenna is used to analyze the effect of MTMs on the antenna operations. The simple structure and small size of the antenna makes it suitable for most of the wireless communication systems.
- 1 February 2025
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 14 (1) , 216-223
Open AccessMetamaterial inspired miniaturized ultra-wideband monopole hexagonal antenna with triple band-filter functions
In this letter, a new technique to the design of an ultra-wideband (UWB) monopole hexagonal antenna with triple band-rejected functions and to restrict the interferences with the exist bands is proposed, the design has the form of a hexagonal patch and a ground plane having rectangular shaped etched in the back side of the substrate to achieve the UWB behavior. The triple-band filter feature is generated by inserting a metamaterial (MTM) as a split ring resonator slots (SRRs) and a complementary split ring resonators (CSRRs) strip, thus no extra size is needed. The triple band-elimination is for 3.3-3.9 GHz centered at 3.5 GHz for 5G band, 4.99-5.4 GHz centered at 5.2 GHz for wireless local area network (WLAN) band, and 6.2-6.8 GHz centered at 6.5 GHz for IEEE INSAT/Supra-extended C-band. The antenna dimension has a compact size of 20×25×1.6 mm3. Current distribution on the antenna is used to analyze the effect of MTMs on the antenna operations. The simple structure and small size of the antenna makes it suitable for most of the wireless communication systems.
- Open Access
- 1 December 2024
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 36 (3) , 1532-1542
Enhanced driving assistance: automated day and night vehicle detection system utilizing convolutional neural networks
This paper presents an enhanced real-time vehicle detection system using convolutional neural networks (CNNs) for both daytime and night-time conditions. Initially, the system determines the time of capture by analyzing the upper part of input images. For daytime detection, it uses normalized cross-correlation and two-dimensional discrete wavelet transform (2D-DWT) techniques. Night-time detection involves identifying vehicle lamps through color thresholding and connected component techniques, followed by symmetry analysis and CNN classification. The dataset for training includes images from the Caltech Cars, AOLP, KITTI Vision, and night-time vehicle detection datasets, ensuring robust performance across various lighting conditions. Experiments demonstrate the system's high accuracy, achieving 99.2% during the day and 98.27% at night, meeting real-time requirements and enhancing driving assistance systems' reliability.
- 1 December 2024
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 36 (3) , 1532-1542
Open AccessEnhanced driving assistance: automated day and night vehicle detection system utilizing convolutional neural networks
This paper presents an enhanced real-time vehicle detection system using convolutional neural networks (CNNs) for both daytime and night-time conditions. Initially, the system determines the time of capture by analyzing the upper part of input images. For daytime detection, it uses normalized cross-correlation and two-dimensional discrete wavelet transform (2D-DWT) techniques. Night-time detection involves identifying vehicle lamps through color thresholding and connected component techniques, followed by symmetry analysis and CNN classification. The dataset for training includes images from the Caltech Cars, AOLP, KITTI Vision, and night-time vehicle detection datasets, ensuring robust performance across various lighting conditions. Experiments demonstrate the system's high accuracy, achieving 99.2% during the day and 98.27% at night, meeting real-time requirements and enhancing driving assistance systems' reliability.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
An automated night-time vehicle detection system for driving assistance based on cross-correlation
Recently, real-time vehicle detection become an important task and big challenge in Driver Assistant Systems (DAS), such as collision mitigation and avoidance and dimming of the headlights. However, the most researchers in the field carried out their research in daytime with good light conditions. In this paper, we propose an efficient night-time vehicle detection method in real-time based on image processing. The principle of the proposed method is to detect the vehicle headlamps and rear-lamps using thresholding method and cross-correlation. First, the bright regions (regions of interest) caused by the rear-lamps and headlamps are detected by a white and red color threshold, followed by performing connected component method to label the generated components (potential lamps) by the color threshold, then the potential lamps are regrouped according to their color label and their position and finally, the lamps are filtered by pairing the symmetrical lamps and omitting the other bright regions using the cross-correlation. The experiment results demonstrate that proposed method has good performance in terms of accuracy and robustness and it can meet the requirements in real time. The experiments were done using C++ and OpenCV on Hardware Processor System (HPS) placed in a VEEK-MT2S provided by TERASIC.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
An automated night-time vehicle detection system for driving assistance based on cross-correlation
Recently, real-time vehicle detection become an important task and big challenge in Driver Assistant Systems (DAS), such as collision mitigation and avoidance and dimming of the headlights. However, the most researchers in the field carried out their research in daytime with good light conditions. In this paper, we propose an efficient night-time vehicle detection method in real-time based on image processing. The principle of the proposed method is to detect the vehicle headlamps and rear-lamps using thresholding method and cross-correlation. First, the bright regions (regions of interest) caused by the rear-lamps and headlamps are detected by a white and red color threshold, followed by performing connected component method to label the generated components (potential lamps) by the color threshold, then the potential lamps are regrouped according to their color label and their position and finally, the lamps are filtered by pairing the symmetrical lamps and omitting the other bright regions using the cross-correlation. The experiment results demonstrate that proposed method has good performance in terms of accuracy and robustness and it can meet the requirements in real time. The experiments were done using C++ and OpenCV on Hardware Processor System (HPS) placed in a VEEK-MT2S provided by TERASIC.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A Traffic Surveillance System in Real-Time to Detect and Classify Vehicles by Using Convolutional Neural Network
The vision-based surveillance systems are widely used in analysis traffic information due to their ease of installation and accuracy of their results. In this paper, an image processing system in real-time has been proposed to detect and classify the vehicles at intersections. This information can be used to estimate traffic density at intersections, and adjust the timing of traffic light for the next light cycle. The detection operation is performed by the background subtraction technique, the approximated median filter is used to extract and update the background, then the vehicles will be tracked in the detection area. After that the vehicle classification will be implemented by using the convolutional neural network (CNN). The system is applied to videos obtained by stationary cameras. The experiments demonstrate that this system is able to robustly detect and classify the vehicles.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A Traffic Surveillance System in Real-Time to Detect and Classify Vehicles by Using Convolutional Neural Network
The vision-based surveillance systems are widely used in analysis traffic information due to their ease of installation and accuracy of their results. In this paper, an image processing system in real-time has been proposed to detect and classify the vehicles at intersections. This information can be used to estimate traffic density at intersections, and adjust the timing of traffic light for the next light cycle. The detection operation is performed by the background subtraction technique, the approximated median filter is used to extract and update the background, then the vehicles will be tracked in the detection area. After that the vehicle classification will be implemented by using the convolutional neural network (CNN). The system is applied to videos obtained by stationary cameras. The experiments demonstrate that this system is able to robustly detect and classify the vehicles.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1587-1591
Vehicle to vehicle distance measurement for self-driving systems
The driving safety is the first challenge for transportation department. Most of traffic accidents resulted from distraction, inattention to surrounding cars and driving fatigue. Several intelligent transportation systems (ITS) have been invented to deal with this problem and protect drivers, for example smart vehicles, Driving Safety Support Systems (DSSS), self-driving and traffic mobility. In the current paper vehicle to vehicle distance measurement system based on image processing has been presented which is a very simple method using two cameras mounted on the vehicle's windshield as one stereoscopic camera. The distance is calculated from geometrical derivations using additional technical data like distance between the cameras and some other specific angles such as the cameras view field angle … The method achieves a very high accuracy where the calculated distance between the vehicle and the camera is relatively accurate.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1587-1591
Vehicle to vehicle distance measurement for self-driving systems
The driving safety is the first challenge for transportation department. Most of traffic accidents resulted from distraction, inattention to surrounding cars and driving fatigue. Several intelligent transportation systems (ITS) have been invented to deal with this problem and protect drivers, for example smart vehicles, Driving Safety Support Systems (DSSS), self-driving and traffic mobility. In the current paper vehicle to vehicle distance measurement system based on image processing has been presented which is a very simple method using two cameras mounted on the vehicle's windshield as one stereoscopic camera. The distance is calculated from geometrical derivations using additional technical data like distance between the cameras and some other specific angles such as the cameras view field angle … The method achieves a very high accuracy where the calculated distance between the vehicle and the camera is relatively accurate.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1592-1597
Vehicle License Plate Localization and Recognition System for Intelligent Transportation Applications
Traffic surveillance systems play an important role in the improvement of traffic safety. Several traffic problems need to be controlled, due to the huge number of vehicles that increases daily, such as traffic accidents, the theft of vehicles and traffic violation. License Plate detection and recognition system (LPDRs) in natural scene images is one of the challenging systems in traffic surveillance. In this paper the LPDRs is the main goal. The proposed method follows two principal steps: hypothesis generation step and hypothesis verification step. In the first step, an adaptive threshold method is used to cope with the dynamic changes of illumination conditions during the binarization of the image. Therefore, the otsu's algorithm is applied which is an efficient and simple method. Followed by performing the Connected Component Analysis technique (CCAT) to detect the rectangles which are the generated license plate candidates. In the second step, the edge detection is applied inside the generated candidates then the close curves method is performed to ensure that the candidate is a license plate and to segment the character. Followed by performing the cross-correlation method between the segmented characters and the templates to define the license plate characters. The proposed method has a good performance in term of robustness where the experiment results show that our system achieves a good accuracy.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1592-1597
Vehicle License Plate Localization and Recognition System for Intelligent Transportation Applications
Traffic surveillance systems play an important role in the improvement of traffic safety. Several traffic problems need to be controlled, due to the huge number of vehicles that increases daily, such as traffic accidents, the theft of vehicles and traffic violation. License Plate detection and recognition system (LPDRs) in natural scene images is one of the challenging systems in traffic surveillance. In this paper the LPDRs is the main goal. The proposed method follows two principal steps: hypothesis generation step and hypothesis verification step. In the first step, an adaptive threshold method is used to cope with the dynamic changes of illumination conditions during the binarization of the image. Therefore, the otsu's algorithm is applied which is an efficient and simple method. Followed by performing the Connected Component Analysis technique (CCAT) to detect the rectangles which are the generated license plate candidates. In the second step, the edge detection is applied inside the generated candidates then the close curves method is performed to ensure that the candidate is a license plate and to segment the character. Followed by performing the cross-correlation method between the segmented characters and the templates to define the license plate characters. The proposed method has a good performance in term of robustness where the experiment results show that our system achieves a good accuracy.
- Open Access
- 9 January 2019
- Published by Wiley in Journal of Electrical and Computer Engineering
- Vol. 2019, 1-9
Real-Time Vehicle Detection Using Cross-Correlation and 2D-DWT for Feature Extraction
Nowadays, real-time vehicle detection is one of the biggest challenges in driver-assistance systems due to the complex environment and the diverse types of vehicles. Vehicle detection can be exploited to accomplish several tasks such as computing the distances to other vehicles, which can help the driver by warning to slow down the vehicle to avoid collisions. In this paper, we propose an efficient real-time vehicle detection method following two steps: hypothesis generation and hypothesis verification. In the first step, potential vehicles locations are detected based on template matching technique using cross-correlation which is one of the fast algorithms. In the second step, two-dimensional discrete wavelet transform (2D-DWT) is used to extract features from the hypotheses generated in the first step and then to classify them as vehicles and nonvehicles. The choice of the classifier is very important due to the pivotal role that plays in the quality of the final results. Therefore, SVMs and AdaBoost are two classifiers chosen to be used in this paper and their results are compared thereafter. The results of the experiments are compared with some existing system, and it showed that our proposed system has good performance in terms of robustness and accuracy and that our system can meet the requirements in real time.
- 9 January 2019
- Published by Wiley in Journal of Electrical and Computer Engineering
- Vol. 2019, 1-9
Open AccessReal-Time Vehicle Detection Using Cross-Correlation and 2D-DWT for Feature Extraction
Nowadays, real-time vehicle detection is one of the biggest challenges in driver-assistance systems due to the complex environment and the diverse types of vehicles. Vehicle detection can be exploited to accomplish several tasks such as computing the distances to other vehicles, which can help the driver by warning to slow down the vehicle to avoid collisions. In this paper, we propose an efficient real-time vehicle detection method following two steps: hypothesis generation and hypothesis verification. In the first step, potential vehicles locations are detected based on template matching technique using cross-correlation which is one of the fast algorithms. In the second step, two-dimensional discrete wavelet transform (2D-DWT) is used to extract features from the hypotheses generated in the first step and then to classify them as vehicles and nonvehicles. The choice of the classifier is very important due to the pivotal role that plays in the quality of the final results. Therefore, SVMs and AdaBoost are two classifiers chosen to be used in this paper and their results are compared thereafter. The results of the experiments are compared with some existing system, and it showed that our proposed system has good performance in terms of robustness and accuracy and that our system can meet the requirements in real time.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Convolution algorithm for implementing 2D discrete wavelet transform on the FPGA
Nowadays, the two dimensional discrete wavelet transform 2D-DWT has become a very important tool in the field of image processing. Several architectures for implementing DWT are proposed. In this paper we present an architecture for implementing the DWT based on the convolution algorithm. This implementation is fully described in VHDL and implemented in an FPGA component.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Convolution algorithm for implementing 2D discrete wavelet transform on the FPGA
Nowadays, the two dimensional discrete wavelet transform 2D-DWT has become a very important tool in the field of image processing. Several architectures for implementing DWT are proposed. In this paper we present an architecture for implementing the DWT based on the convolution algorithm. This implementation is fully described in VHDL and implemented in an FPGA component.