GNGeorgios Nikiforidis

Georgios Nikiforidis

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Georgios Nikiforidis has a total of 129 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Uncertainty-Aware Optimisation of PEM-Integrated Hybrid Energy Storage for Data Centres: Cost, Carbon, and Resilience Trade-offs

    by Tianyi Ma, Catalina Spataru, Weijia Yang, Xiaojing Lv, Priscila Carvalho, Shangfeng Du, Georgios Nikiforidis

    Hybrid energy storage combining lithium-ion batteries with proton exchange membrane (PEM) electrolysers can support low-carbon data-centre power, but its design is sensitive to coupled weather, demand and market uncertainty. We develop an uncertainty-aware, scenario-based mixed-integer linear programming (MILP) framework for a PEM-electrolyser-integrated hybrid energy storage system (HESS) serving mission-critical loads. The model enforces one non-anticipative sizing decision across 100 scenarios, including 95 representative scenarios and 5 stress scenarios, under three objectives: capital expenditure (CAPEX), total annualised cost (TAC) and carbon dioxide (CO₂) emissions.The results show three main findings. First, the accuracy cost of temporal aggregation is objective-dependent: the design-relevant error is objective-value deviation, not load-reconstruction root mean square error (RMSE). The emissions objective is most sensitive, with deviation from the full 8760-hour reference falling from approximately 8% at 24 typical days to approximately 2% at 36 typical days, while CAPEX deviation remains approximately 1%.Second, cost-optimal infrastructure shifts through regimes rather than scaling smoothly. Moderate CO₂ reduction is achieved by re-dispatch, intermediate reduction by expanding photovoltaic (PV) generation and battery capacity, and deep reduction by overbuilding PV, reducing grid imports and activating the hydrogen chain.Third, the optimisation objective determines the resilience profile. CAPEX-minimising designs are most exposed to grid curtailment, while emissions-minimising designs are most exposed to PV loss. The framework therefore reveals a cost–carbon–resilience trade-off hidden by single-scenario sizing.

  • Open Access

    K + ‐Triggered Defect Engineering and Proton‐Coupled Storage in V 2 O 5 ·nH 2 O for Advanced Zn‐Ion Thin‐Film and Microbatteries

    by Jingli Luo, Sanat Nalini Paltasingh, Bastola Narayan, Yijia Zhu, Debashish Das, Shuhui Li, Firoz Alam, Subhra R. Pattanayak, Sijin Liu, Tharangattu N. Narayanan, et al.

    The increasing demand for wearable electronics, point‐of‐care diagnostics, and integrated microsystems necessitates thin‐film and microbatteries that combine high energy density, fast kinetics, and intrinsic safety. In this work, we develop Zn‐based thin‐film batteries (Zn‐TFBs) and microbatteries (Zn‐MBs) using K + ‐pre‐intercalated V 2 O 5 ·nH 2 O cathodes and reveal a fundamentally distinct charge‐storage mechanism. Contrary to the conventional paradigm where metal‐ion pre‐intercalation merely enlarges interlayer spacing, K + incorporation induces interlayer contraction accompanied by substantial oxygen‐vacancy generation and mixed‐valence (V 4 + /V 5 + ) formation. These coupled lattice and electronic modulations activate proton‐dominated transport pathways, enabling cooperative H + /Zn 2 + co‐storage and markedly accelerated reaction kinetics. Density functional theory calculations further confirm that the enhanced electrochemical behavior cannot be explained by interlayer expansion alone, but originates from defect‐mediated proton conduction and vacancy‐stabilized redox centers. Benefiting from this defect‐engineered proton‐Zn 2 + synergistic storage, the K + ‐modified V 2 O 5 ·nH 2 O cathode delivers an areal capacity of 200.9 µAh cm − 2 and an areal energy of 150 µWh cm − 2 at 50 µA cm − 2 in Zn‐TFBs, together with a high areal capacity of 49 µAh cm − 2 in Zn‐MBs. This study establishes K + ‐triggered defect and valence‐state engineering as a powerful strategy to regulate proton‐coupled charge storage in hydrated vanadium oxides, opening a viable pathway toward high‐energy Zn‐based energy‐storage systems.


  • Open Access

    3D Engineered Dual‐Redox Zinc‐Iodine Microbatteries for Intrinsically Safe on‐Chip Energy Storage

    by Nibagani Naresh, Sanat Nalini Paltasingh, Yijia Zhu, Xiaopeng Liu, Yujia Fan, Monojit Mondal, Su Jin Heo, Shuhui Li, Mingqing Wang, Shaoliang Guan, et al.

    The ongoing miniaturization of electronic technologies—from medical implants and microrobots to IoT and sensor networks—demands compact, intrinsically safe, and high‐energy‐density microbatteries (MBs). Yet, achieving on‐chip energy storage that simultaneously delivers high capacity, rapid kinetics, and scalability remains a formidable challenge. Here, we report advance zinc‐iodine (Zn//I 2 ) MBs that exploit a synergistic dual‐redox chemistry by introducing ZnI 2 into a Zn(CF 3 SO 3 ) 2 gel electrolyte, enabling reversible I − /I 3 − conversion in tandem with Zn 2 + plating/stripping. Coupled with a polyaniline (PANI) micro‐cathode, zinc micro‐anode, and 3D porous Au interdigitated current collector, this architecture delivers over 26‐fold enhancement in charge storage relative to conventional Zn‐ion MBs using identical electrodes. The optimized Zn//I 2 MBs achieve an improved areal capacity of 314 µAh cm − 2 , energy density of 363 µWh cm − 2 , and power density of 5385 µW cm − 2 . Density functional theory (DFT) calculations and electrochemical analyses reveal strong I − /I 3 − adsorption on PANI, confirming its superior redox hosting capability and hybrid charge storage behavior. This work establishes a new design paradigm for intrinsically safe, and CMOS‐compatible Zn‐based MBs, offering a transformative pathway toward on‐chip powered, fully integrated microsystems and next‐generation smart electronics.


  • Open Access

    Self-Standing Eutectic Gallium-Indium-Reduced Graphene Oxide Aerogels as High-Performance Supercapacitor Electrodes

    by Georgios Nikiforidis, Saira Ishaq, Yanzhuo Li

    The exploration of Group 13 (IIIA) elements, gallium (Ga) and indium (In), for energy storage remains limited despite their attractive properties. This work addresses this gap by presenting a novel, self-standing eutectic gallium indium/reduced graphene oxide aerogel (EGaInGAA) synthesized via a facile, chemical-reductant-free hydrothermal method. This approach uniquely transforms liquid metal into a solid-state framework where reduced graphene oxide (rGO) sheets are integrated with gallium oxyhydroxide (GaOOH), indium hydroxide (In(OH)3), and indium oxide (In2O3) particles. When deployed as a binder-free electrode in a symmetric supercapacitor (SC), the hybrid material leverages synergistic effects. The rGO provides a conductive, porous network for electric double-layer capacitance, while the Ga/In-based compounds contribute pseudocapacitance. The device achieved a gravimetric capacitance of 99.7 F g-1 and an energy density of 27.7 Wh kg-1 at a power density of 249.3 W kg-1 in an aqueous alkaline electrolyte. Further, it retained 74% of its initial specific capacitance after 10,000 cycles with 98.4% coulombic efficiency. A subsequent multi-dimensional assessment confirmed that EGaInGA exhibited one of the most balanced performance profiles across electrochemical, economic, and environmental criteria. This study not only demonstrates the successful integration of a liquid metal alloy into a solid, high-performance electrode but also establishes a new paradigm for harnessing Group 13 (IIIA) elements in energy storage devices.

  • Open Access

    Design and optimization of binder-free rGO/AlO(OH)/Al2O3 aerogels for energy storage

    by Saira Ishaq, Haotian Ma, Yanzhuo Li, Georgios Nikiforidis

  • Open Access

    A Nonflammable Deep Eutectic Electrolyte for Safe and High-Performance Lithium Iron Phosphate-Lithium Titanium Oxide Cells

    by Muhammad Hakeem Noor Azleen, Pei-Min Ting, Ziwei Chen, Yanzhuo Li, Yao Shi, Shahab Akhavan, Meriem Anouti, Georgios Nikiforidis


  • Open Access

    Exploring Rochelle Salt Aqueous Solutions for Supercapacitors: Transport, Stability, and Performance

    by Hamza Kahri, Chalal Tachouaft, Yanzhuo Li, Ziwei Chen, Mérièm Anouti, Georgios Nikiforidis

    This study examines the thermal, transport, and electrochemical properties of Rochelle salt (SPTa, KNaC 4 H 4 O 6 ·4H 2 O) aqueous solutions for energy storage applications. SPTa exhibits eutectic melting (−38 °C), crystallization, density variations (e.g., 0.25 g cm −3 at 25 °C for 2.0 mol dm −3 ), and high ionic conductivity (70 mS cm −1 at 25 °C for 1.0 mol dm −3 ), which increases with temperature and concentration. Ionic transport follows the Arrhenius and Vogel–Fulcher–Tammann models, indicating low activation energies for ion mobility, especially below 8 °C. The Walden plot analysis suggests that most ions remain dissociated in the solution, while the thermodynamic parameters from the activated state of viscosity indicate strong chelation and molecular structuring effects. Cyclic voltammetry of symmetric supercapacitors with activated carbon electrodes in 1.0 mol dm −3 SPTa confirms double‐layer capacitive behavior with a 2.5 V electrochemical window. Galvanostatic charge/discharge tests reveal an energy density of 35 Wh kg −1 , excellent cycling stability (10 000 cycles), and high coulombic efficiency (>97%). Electrolyte evaporation and electrode degradation require further optimization for long‐term stability. These findings highlight SPTa as a cost‐effective and sustainable candidate for electrochemical energy storage.


  • Non‐Flammable Sodium Asymmetric Imide Salt‐Based Deep Eutectic Solvent for Supercapacitor Applications

    by Joseph Chidiac, Georgios Nikiforidis, Laure Timperman, Mérièm Anouti

    This study reports two deep eutectic solvents (DESs) based on alkaline imide salts with asymmetric anions as functional electrolytes for supercapacitor (SC) application. The eutectic mixture of sodium (fluorosulfonyl) (trifluoromethanesulfonyl) imide (NaFTFSI) or sodium cyano‐trifluoromethanesulfonyl imide (NaTFSICN) with ethylene carbonate (EC) delivers a non‐flammable and stable liquid. The eutectic diagrams of the electrolytes directed to an optimal composition (wsalt=0.25), hinging to that of conventional carbonate‐based electrolytes, i. e., 1 mol L−1. The volumetric properties of the DESs revealed a “stacking” effect, reflecting a strong coordination bond between the imide and EC anions without solvating the Na+ cations. The DES transport properties (i. e., viscosity, conductivity, and ionicity) and temperature variations designate a high organization, similar to ionic liquids. The DESs, when coupled with activated carbon electrodes in a two‐electrode symmetric configuration, yield specific capacities of 150 F g−1 at a normalized current density of 0.5 A g−1 (and 120 F g−1 at 2 A g−1). The SC maintained 80 % of its initial capacity beyond 100 h of floating at an operating voltage of 2.4 V and showed a 150 mV per hour potential loss under self‐discharge. The devised eutectic mixtures offer a promising new pathway for simple, safe, and effective electrolytes for SC applications.


  • Amide-based deep eutectic solvents containing LiFSI and NaFSI salts as superionic electrolytes for supercapacitor applications

    by Samia Amara, Warda Zaidi, Laure Timperman, Georgios Nikiforidis, Mérièm Anouti

    This work proposes two deep eutectic solvents (DESs) based on lithium bis(fluorosulfonyl)imide and sodium bis(fluorosulfonyl)imide together with N-methylacetamide and formamide as electrolytes for activated carbon (AC) electrochemical double-layer capacitors (EDLCs) at 25 °C. The formulated DESs exhibit a large electrochemical window (ΔE > 2.5 V), good thermal stability (∼150 °C) and ionic conductivity (3–4 mS cm−1), and moderate viscosity (11.3 mPa s). Through the Vogel–Tamman–Vulcher fitting equation, the evolution of pseudo-energy activation was delineated with respect to the nature of the H-bond donor or alkali salt. These electrolytes present a superionic character gleaned from the Walden classification, and their ionicity exceeds that of standard organic electrolytes based on similar alkali salts. The performance of the AC-based EDLC was assessed by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge, yielding 140 F g−1 with an 8% capacity retention during 200 h of floating. Based on the physicochemical properties and electrochemical performance of these DESs, they represent a promising green-alternative electrolyte for supercapacitor applications.