Kartikeya Walia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kartikeya Walia has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Philip Breedon
Department of Engineering, Nottingham Trent University, Nottingham NG11 8NS, UK
4 shared publications Anand Gupta
2 shared publicationsAditi Rawat
1 shared publicationAditya Singh
Department of Engineering School of Science and Technology, Nottingham Trent University, UK
1 shared publication- Ahmed Khan
PepsiCo Europe, Leicester LE4 1ET, UK
1 shared publication Deepkamal Kaur Gill
1 shared publication
Latest Publications
- Open Access
Assembly Complexity Index (ACI) for Modular Robotic Systems: Validation and Conceptual Framework for AR/VR-Assisted Assembly
The growing adoption of modular robotic systems presents new challenges in ensuring ease of assembly, deployment, and reconfiguration, especially for end-users with varying technical expertise. This study proposes and validates an Assembly Complexity Index (ACI) framework, combining subjective workload (NASA Task Load Index) and task complexity (Task Complexity Index) into a unified metric to quantify assembly difficulty. Twelve participants performed modular manipulator assembly tasks under supervised and unsupervised conditions, enabling evaluation of learning effects and assembly complexity dynamics. Statistical analyses, including Cronbach’s alpha, correlation studies, and paired t-tests, demonstrated the framework’s internal consistency, sensitivity to user learning, and ability to capture workload-performance trade-offs. Additionally, we propose an augmented reality (AR) and virtual reality (VR) integration workflow to further mitigate assembly complexity, offering real-time guidance and adaptive assistance. The proposed framework not only supports design iteration and operator training but also provides a human-centered evaluation methodology applicable to modular robotics deployment in Industry 4.0 environments. The AR/VR-assisted workflow presented here is proposed as a conceptual extension and will be validated in future work.
Open AccessAssembly Complexity Index (ACI) for Modular Robotic Systems: Validation and Conceptual Framework for AR/VR-Assisted Assembly
The growing adoption of modular robotic systems presents new challenges in ensuring ease of assembly, deployment, and reconfiguration, especially for end-users with varying technical expertise. This study proposes and validates an Assembly Complexity Index (ACI) framework, combining subjective workload (NASA Task Load Index) and task complexity (Task Complexity Index) into a unified metric to quantify assembly difficulty. Twelve participants performed modular manipulator assembly tasks under supervised and unsupervised conditions, enabling evaluation of learning effects and assembly complexity dynamics. Statistical analyses, including Cronbach’s alpha, correlation studies, and paired t-tests, demonstrated the framework’s internal consistency, sensitivity to user learning, and ability to capture workload-performance trade-offs. Additionally, we propose an augmented reality (AR) and virtual reality (VR) integration workflow to further mitigate assembly complexity, offering real-time guidance and adaptive assistance. The proposed framework not only supports design iteration and operator training but also provides a human-centered evaluation methodology applicable to modular robotics deployment in Industry 4.0 environments. The AR/VR-assisted workflow presented here is proposed as a conceptual extension and will be validated in future work.
- Open Access
- 11 July 2025
- Published by Frontiers Media SA in Frontiers in Mechanical Engineering
- Vol. 11, 1629405
Generatively optimised compact 3-DoF spherical parallel manipulator with tightly integrated actuators
A singularity-free pose realization is a key feature for any robotic system. This paper presents the development of a 3-DoF pure rolling spherical parallel manipulator (SPM) with tightly integrated actuators. Conventional serial wrist mechanisms often face singularities and structural constraints, limiting performance during dynamic tasks. They also require more space due to their larger span. While parallel manipulators are compact, they often concentrate weight in a confined volume and offer limited room for actuator integration. To address these challenges, we propose a pure rolling spherical parallel manipulator (SPM) that incorporates generative design for weight optimization, reducing overall mass while preserving structural integrity and manipulability. This approach achieved a 54.61% reduction in linkage weight and a 33.9% reduction in total system-weight, enabling compact and efficient integration of direct or quasi-direct drive actuators. The mechanism’s unique topology allows pure rolling motion with decoupled yaw control, overcoming limitations of existing 2-DoF devices like Omni Wrist III. Using 3D printing for prototyping facilitated rapid iterations and testing. Performance evaluation demonstrated high precision, with mean positional errors of 0.0291 mm–0.2778 mm and orientation errors between 0.0562° and 0.3561°. Validated as a neck joint for an immersive teleoperated robot, the SPM shows promise in humanoid robotics and advanced manipulation requiring precise orientation control. The integration of actuators within a generatively optimized structure offers a compact, lightweight solution and a high-performance alternative for applications demanding singularity-free motion and reduced actuation-complexity. Future work will extend this design to higher payload systems using metal components, enhancing durability and functionality for industrial applications.
- 11 July 2025
- Published by Frontiers Media SA in Frontiers in Mechanical Engineering
- Vol. 11, 1629405
Open AccessGeneratively optimised compact 3-DoF spherical parallel manipulator with tightly integrated actuators
A singularity-free pose realization is a key feature for any robotic system. This paper presents the development of a 3-DoF pure rolling spherical parallel manipulator (SPM) with tightly integrated actuators. Conventional serial wrist mechanisms often face singularities and structural constraints, limiting performance during dynamic tasks. They also require more space due to their larger span. While parallel manipulators are compact, they often concentrate weight in a confined volume and offer limited room for actuator integration. To address these challenges, we propose a pure rolling spherical parallel manipulator (SPM) that incorporates generative design for weight optimization, reducing overall mass while preserving structural integrity and manipulability. This approach achieved a 54.61% reduction in linkage weight and a 33.9% reduction in total system-weight, enabling compact and efficient integration of direct or quasi-direct drive actuators. The mechanism’s unique topology allows pure rolling motion with decoupled yaw control, overcoming limitations of existing 2-DoF devices like Omni Wrist III. Using 3D printing for prototyping facilitated rapid iterations and testing. Performance evaluation demonstrated high precision, with mean positional errors of 0.0291 mm–0.2778 mm and orientation errors between 0.0562° and 0.3561°. Validated as a neck joint for an immersive teleoperated robot, the SPM shows promise in humanoid robotics and advanced manipulation requiring precise orientation control. The integration of actuators within a generatively optimized structure offers a compact, lightweight solution and a high-performance alternative for applications demanding singularity-free motion and reduced actuation-complexity. Future work will extend this design to higher payload systems using metal components, enhancing durability and functionality for industrial applications.
- Open Access
- 8 July 2025
- Published by MDPI AG in Preprints.org
Assembly Complexity Index (ACI) for Modular Robotic Systems: Validation and Conceptual Framework for AR/VR-Assisted Assembly
The growing adoption of modular robotic systems presents new challenges in ensuring ease of assembly, deployment, and reconfiguration, especially for end-users with varying technical expertise. This study proposes and validates an Assembly Complexity Index (ACI) framework, combining subjective workload (NASA Task Load Index) and task complexity (Task Complexity Index) into a unified metric to quantify assembly difficulty. Twelve participants performed modular manipulator assembly tasks under supervised and unsupervised conditions, enabling evaluation of learning effects and assembly complexity dynamics. Statistical analyses, including Cronbach’s alpha, correlation studies, and paired t-tests, demonstrated the framework’s internal consistency, sensitivity to user learning, and ability to capture workload-performance trade-offs. Additionally, we propose an augmented reality (AR) and virtual reality (VR) integration workflow to further mitigate assembly complexity, offering real-time guidance and adaptive assistance. Sensitivity analysis confirms the robustness of the ACI under varying weighting schemes. The proposed framework not only supports design iteration and operator training but also provides a human-centered evaluation methodology applicable to modular robotics deployment in Industry 4.0 environments.
- 8 July 2025
- Published by MDPI AG in Preprints.org
Open AccessAssembly Complexity Index (ACI) for Modular Robotic Systems: Validation and Conceptual Framework for AR/VR-Assisted Assembly
The growing adoption of modular robotic systems presents new challenges in ensuring ease of assembly, deployment, and reconfiguration, especially for end-users with varying technical expertise. This study proposes and validates an Assembly Complexity Index (ACI) framework, combining subjective workload (NASA Task Load Index) and task complexity (Task Complexity Index) into a unified metric to quantify assembly difficulty. Twelve participants performed modular manipulator assembly tasks under supervised and unsupervised conditions, enabling evaluation of learning effects and assembly complexity dynamics. Statistical analyses, including Cronbach’s alpha, correlation studies, and paired t-tests, demonstrated the framework’s internal consistency, sensitivity to user learning, and ability to capture workload-performance trade-offs. Additionally, we propose an augmented reality (AR) and virtual reality (VR) integration workflow to further mitigate assembly complexity, offering real-time guidance and adaptive assistance. Sensitivity analysis confirms the robustness of the ACI under varying weighting schemes. The proposed framework not only supports design iteration and operator training but also provides a human-centered evaluation methodology applicable to modular robotics deployment in Industry 4.0 environments.
- Open Access
Polymer-Based Additive Manufacturing: Process Optimisation for Low-Cost Industrial Robotics Manufacture
The robotics design process can be complex with potentially multiple design iterations. The use of 3D printing is ideal for rapid prototyping and has conventionally been utilised in concept development and for exploring different design parameters that are ultimately used to meet an intended application or routine. During the initial stage of a robot development, exploiting 3D printing can provide design freedom, customisation and sustainability and ultimately lead to direct cost benefits. Traditionally, robot specifications are selected on the basis of being able to deliver a specific task. However, a robot that can be specified by design parameters linked to a distinctive task can be developed quickly, inexpensively, and with little overall risk utilising a 3D printing process. Numerous factors are inevitably important for the design of industrial robots using polymer-based additive manufacturing. However, with an extensive range of new polymer-based additive manufacturing techniques and materials, these could provide significant benefits for future robotics design and development.
Open AccessPolymer-Based Additive Manufacturing: Process Optimisation for Low-Cost Industrial Robotics Manufacture
The robotics design process can be complex with potentially multiple design iterations. The use of 3D printing is ideal for rapid prototyping and has conventionally been utilised in concept development and for exploring different design parameters that are ultimately used to meet an intended application or routine. During the initial stage of a robot development, exploiting 3D printing can provide design freedom, customisation and sustainability and ultimately lead to direct cost benefits. Traditionally, robot specifications are selected on the basis of being able to deliver a specific task. However, a robot that can be specified by design parameters linked to a distinctive task can be developed quickly, inexpensively, and with little overall risk utilising a 3D printing process. Numerous factors are inevitably important for the design of industrial robots using polymer-based additive manufacturing. However, with an extensive range of new polymer-based additive manufacturing techniques and materials, these could provide significant benefits for future robotics design and development.
- 11 December 2020
- Published by SAGE Publications in WORK: A Journal of Prevention, Assessment & Rehabilitation
- Vol. 68 (s1) , S111-S118
Driver seat comfort for level 3-4 autonomous vehicles
BACKGROUND: Autonomous vehicles can be classified on a scale of automation from 0 to 5, where level 0 corresponds to vehicles that have no automation to level 5 where the vehicle is fully autonomous and it is not possible for the human occupant to take control. At level 2, the driver needs to retain attention as they are in control of at least some systems. Level 3-4 vehicles are capable of full control but the human occupant might be required to, or desire to, intervene in some circumstances. This means that there could be extended periods of time where the driver is relaxed, but other periods of time when they need to drive. OBJECTIVE: The seat must therefore be designed to be comfortable in at least two different types of use case. METHODS: This driving simulator study compares the comfort experienced in a seat from a production hybrid vehicle whilst being used in a manual driving mode and in autonomous mode for a range of postures. RESULTS: It highlights how discomfort is worse for cases where the posture is non-optimal for the task. It also investigates the design of head and neckrests to mitigate neck discomfort, and shows that a well-designed neckrest is beneficial for drivers in autonomous mode.
- 11 December 2020
- Published by SAGE Publications in WORK: A Journal of Prevention, Assessment & Rehabilitation
- Vol. 68 (s1) , S111-S118
Driver seat comfort for level 3-4 autonomous vehicles
BACKGROUND: Autonomous vehicles can be classified on a scale of automation from 0 to 5, where level 0 corresponds to vehicles that have no automation to level 5 where the vehicle is fully autonomous and it is not possible for the human occupant to take control. At level 2, the driver needs to retain attention as they are in control of at least some systems. Level 3-4 vehicles are capable of full control but the human occupant might be required to, or desire to, intervene in some circumstances. This means that there could be extended periods of time where the driver is relaxed, but other periods of time when they need to drive. OBJECTIVE: The seat must therefore be designed to be comfortable in at least two different types of use case. METHODS: This driving simulator study compares the comfort experienced in a seat from a production hybrid vehicle whilst being used in a manual driving mode and in autonomous mode for a range of postures. RESULTS: It highlights how discomfort is worse for cases where the posture is non-optimal for the task. It also investigates the design of head and neckrests to mitigate neck discomfort, and shows that a well-designed neckrest is beneficial for drivers in autonomous mode.
- 4 March 2019
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 25 (2) , 397-403
3D modelling and printing of craniofacial implant template
Purpose: To relieve intracranial pressure and save patient inflicted with severe head injury, neurosurgeons restore cranial defects. These defects can be caused because of trauma or diseases (Osteomyelitis of bone) which are treated by cranioplasty, using the preserved bone of patient. In case of non-availability of bone, a cranial implant is generated using a biocompatible synthetic material, but this process is less accurate and time-consuming. Hence, this paper aims to present the use of rapid prototyping technology that allows the development of a more accurate patient-specific template and saves the surgery time.Design/methodology/approach: A five-year-old girl patient having cranial defect was taken up for cranioplasty. CT (computed tomography) scans of the patient were used to generate 3D design of the implant suitable to conceal the defect on the left frontal portion using CAD/CAM (computer-aided design/ computer-aided manufacturing) software. The design was used for 3D printing to manufacture a base template, which was finally used to fabricate the actual implant using Simplex® P bone cement material to conceal the defect.Findings: Surgery using Simplex® P implant was performed successfully on the patient, giving precise natural curvature to left frontal portion of the patient, decreasing surgery time by about 30 per cent.Originality/value: The case demonstrates the development of a convenient, time-saving and aesthetically superior digital procedure to treat cranial defect in the absence of preserved bone flap using CT scan as input. 3D modelling and printing were deployed to produce an accurate template which was used to generate an implant using bone cement biocompatible material.
- 4 March 2019
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 25 (2) , 397-403
3D modelling and printing of craniofacial implant template
Purpose: To relieve intracranial pressure and save patient inflicted with severe head injury, neurosurgeons restore cranial defects. These defects can be caused because of trauma or diseases (Osteomyelitis of bone) which are treated by cranioplasty, using the preserved bone of patient. In case of non-availability of bone, a cranial implant is generated using a biocompatible synthetic material, but this process is less accurate and time-consuming. Hence, this paper aims to present the use of rapid prototyping technology that allows the development of a more accurate patient-specific template and saves the surgery time.Design/methodology/approach: A five-year-old girl patient having cranial defect was taken up for cranioplasty. CT (computed tomography) scans of the patient were used to generate 3D design of the implant suitable to conceal the defect on the left frontal portion using CAD/CAM (computer-aided design/ computer-aided manufacturing) software. The design was used for 3D printing to manufacture a base template, which was finally used to fabricate the actual implant using Simplex® P bone cement material to conceal the defect.Findings: Surgery using Simplex® P implant was performed successfully on the patient, giving precise natural curvature to left frontal portion of the patient, decreasing surgery time by about 30 per cent.Originality/value: The case demonstrates the development of a convenient, time-saving and aesthetically superior digital procedure to treat cranial defect in the absence of preserved bone flap using CT scan as input. 3D modelling and printing were deployed to produce an accurate template which was used to generate an implant using bone cement biocompatible material.
- 9 January 2019
- Published by Taylor & Francis in Computer Methods in Biomechanics and Biomedical Engineering
- Vol. 22 (3) , 324-330
Finite element analysis of titanium alloy-graphene based mandible plate
Titanium alloy based maxillofacial plates and implants are widely used in fracture treatment and reconstructions. Filler materials Graphene Nanoplatlets(GNPs) were used in a Titanium alloy maxillofacial plate and a Finite Element Model (FEM) was designed to reconstruct a fractured human mandible. Both 50N and 500N bite forces were applied on the mandible and stress distribution using Von mises failure theory across the plate sections was analyzed. A pure plate was critically stressed at a section near the mandible fracture region for a Von mises stress of nearly 27.5GPa while this stress reduced by nearly 10–22% with the presence of minor composition of GNPs in the plate. GNPs orientation in parallel (21.1 GPa) to the plate axis were more effective in comparison to other orientations(90°, 45° and 135°) and the location variation of these GNPs along the plate had no significant effect on the stress distribution. The fatigue analyses showed that, under these stresses and forces the plate with GNP was able to endure for nearly 7000 days, while the pure Titanium plate could fail by fatigue in approximately 70 days. Hence, presence of minor compositions of GNPs could enhance endurance life of the Titanium plate by reducing stress concentrations at critical sections of the plate.
- 9 January 2019
- Published by Taylor & Francis in Computer Methods in Biomechanics and Biomedical Engineering
- Vol. 22 (3) , 324-330
Finite element analysis of titanium alloy-graphene based mandible plate
Titanium alloy based maxillofacial plates and implants are widely used in fracture treatment and reconstructions. Filler materials Graphene Nanoplatlets(GNPs) were used in a Titanium alloy maxillofacial plate and a Finite Element Model (FEM) was designed to reconstruct a fractured human mandible. Both 50N and 500N bite forces were applied on the mandible and stress distribution using Von mises failure theory across the plate sections was analyzed. A pure plate was critically stressed at a section near the mandible fracture region for a Von mises stress of nearly 27.5GPa while this stress reduced by nearly 10–22% with the presence of minor composition of GNPs in the plate. GNPs orientation in parallel (21.1 GPa) to the plate axis were more effective in comparison to other orientations(90°, 45° and 135°) and the location variation of these GNPs along the plate had no significant effect on the stress distribution. The fatigue analyses showed that, under these stresses and forces the plate with GNP was able to endure for nearly 7000 days, while the pure Titanium plate could fail by fatigue in approximately 70 days. Hence, presence of minor compositions of GNPs could enhance endurance life of the Titanium plate by reducing stress concentrations at critical sections of the plate.