Pandeng Li
Pandeng Li has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Baoquan Sun
State Key Laboratory of Bioinspired Interfacial Materials Science Institute of Functional Nano & Soft Materials (FUNSOM) Soochow University Suzhou China
4 shared publications Dongling Ma
Center of Energy, Materials and Telecommunications Institut National de la Recherche Scientifique (INRS) 1650 Boul. Lionel-Boulet Varennes Québec J3X 1S2 Canada
2 shared publications- Dongling Ma
Énergie, Matériaux et Télécommunications Institut National de la Recherche Scientifique (INRS) Varennes Québec Canada
2 shared publications - Fang Jin
Hubei Key Laboratory of Novel Reactor and Green Chemical Technology Wuhan Institute of Technology Wuhan China
2 shared publications Lei Cai
Institute of Functional Nano & Soft Materials (FUNSOM) Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices and Collaborative Innovation Center of Suzhou Nano Science and Technology Soochow University 199 Ren'ai Road Suzhou 215123 P. R. China
2 shared publicationsMaojie Zhang
Soochow University, Institute of Functional Nano & Soft Materials (FUNSOM), 199 Ren'ai Road, 215123, Suzhou, CHINA
2 shared publications
Latest Publications
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6707-6712
Enhancing Power System Resilience with False Data Injection-Resistant Model Predictive Control
This paper proposes a resilient control scheme based on the set theory and model for cyber power systems subjected to network deception attacks. For the problem of deception attacks through false data injection (FDI) in the power system, this paper studies the model predictive control scheme that makes use of tube. Based on the characteristics of the robust positive invariant set that has been defined, an optimization problem (referred to as OP) is formulated to design the controller. The feasibility of this optimization problem and the practical stability of the controlled system are ensured. To demonstrate the efficacy of the proposed approach, a numerical simulation on cyber system is conducted on a power system. The results of the simulation serve as verification of the effectualness of the proposed scheme.
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6707-6712
Enhancing Power System Resilience with False Data Injection-Resistant Model Predictive Control
This paper proposes a resilient control scheme based on the set theory and model for cyber power systems subjected to network deception attacks. For the problem of deception attacks through false data injection (FDI) in the power system, this paper studies the model predictive control scheme that makes use of tube. Based on the characteristics of the robust positive invariant set that has been defined, an optimization problem (referred to as OP) is formulated to design the controller. The feasibility of this optimization problem and the practical stability of the controlled system are ensured. To demonstrate the efficacy of the proposed approach, a numerical simulation on cyber system is conducted on a power system. The results of the simulation serve as verification of the effectualness of the proposed scheme.
- 19 April 2021
- Published by Wiley in Angewandte Chemie
- Vol. 133 (27) , 15181-15189
Synergistic Effect of Dielectric Property and Energy Transfer on Charge Separation in Non‐Fullerene‐Based Solar Cells
In non‐fullerene‐based photovoltaic devices, it is unclear how excitons efficiently dissociate into charge carriers under small driving force. Here, we developed a modified method to estimate dielectric constants of PM6 donor and non‐fullerene acceptors. Surprisingly, most non‐fullerene acceptors and blend films showed higher dielectric constants. Moreover, they exhibited larger dielectric constants differences at the optical frequency. These results are likely bound to reduced exciton binding energy and bimolecular recombination. Besides, the overlap between the emission spectrum of donor and absorption spectra of non‐fullerene acceptors allowed the energy transfer from donor to acceptors. Hence, based on the synergistic effect of dielectric property and energy transfer resulting in efficient charge separation, our finding paves an alternative path to elucidate the physical working mechanism in non‐fullerene‐based photovoltaic devices.
- 19 April 2021
- Published by Wiley in Angewandte Chemie
- Vol. 133 (27) , 15181-15189
Synergistic Effect of Dielectric Property and Energy Transfer on Charge Separation in Non‐Fullerene‐Based Solar Cells
In non‐fullerene‐based photovoltaic devices, it is unclear how excitons efficiently dissociate into charge carriers under small driving force. Here, we developed a modified method to estimate dielectric constants of PM6 donor and non‐fullerene acceptors. Surprisingly, most non‐fullerene acceptors and blend films showed higher dielectric constants. Moreover, they exhibited larger dielectric constants differences at the optical frequency. These results are likely bound to reduced exciton binding energy and bimolecular recombination. Besides, the overlap between the emission spectrum of donor and absorption spectra of non‐fullerene acceptors allowed the energy transfer from donor to acceptors. Hence, based on the synergistic effect of dielectric property and energy transfer resulting in efficient charge separation, our finding paves an alternative path to elucidate the physical working mechanism in non‐fullerene‐based photovoltaic devices.
- 19 April 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 60 (27) , 15054-15062
Synergistic Effect of Dielectric Property and Energy Transfer on Charge Separation in Non‐Fullerene‐Based Solar Cells
In non‐fullerene‐based photovoltaic devices, it is unclear how excitons efficiently dissociate into charge carriers under small driving force. Here, we developed a modified method to estimate dielectric constants of PM6 donor and non‐fullerene acceptors. Surprisingly, most non‐fullerene acceptors and blend films showed higher dielectric constants. Moreover, they exhibited larger dielectric constants differences at the optical frequency. These results are likely bound to reduced exciton binding energy and bimolecular recombination. Besides, the overlap between the emission spectrum of donor and absorption spectra of non‐fullerene acceptors allowed the energy transfer from donor to acceptors. Hence, based on the synergistic effect of dielectric property and energy transfer resulting in efficient charge separation, our finding paves an alternative path to elucidate the physical working mechanism in non‐fullerene‐based photovoltaic devices.
- 19 April 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 60 (27) , 15054-15062
Synergistic Effect of Dielectric Property and Energy Transfer on Charge Separation in Non‐Fullerene‐Based Solar Cells
In non‐fullerene‐based photovoltaic devices, it is unclear how excitons efficiently dissociate into charge carriers under small driving force. Here, we developed a modified method to estimate dielectric constants of PM6 donor and non‐fullerene acceptors. Surprisingly, most non‐fullerene acceptors and blend films showed higher dielectric constants. Moreover, they exhibited larger dielectric constants differences at the optical frequency. These results are likely bound to reduced exciton binding energy and bimolecular recombination. Besides, the overlap between the emission spectrum of donor and absorption spectra of non‐fullerene acceptors allowed the energy transfer from donor to acceptors. Hence, based on the synergistic effect of dielectric property and energy transfer resulting in efficient charge separation, our finding paves an alternative path to elucidate the physical working mechanism in non‐fullerene‐based photovoltaic devices.
Air‐Processed, Stable Organic Solar Cells with High Power Conversion Efficiency of 7.41%
High efficiency, excellent stability, and air processability are all important factors to consider in endeavoring to push forward the real‐world application of organic solar cells. Herein, an air‐processed inverted photovoltaic device built upon a low‐bandgap, air‐stable, phenanthridinone‐based ter‐polymer (C150H218N6O6S4)n (PDPPPTD) and [6,6]‐phenyl‐C61‐butyric acid methyl ester (PC61BM) without involving any additive engineering processes yields a high efficiency of 6.34%. The PDPPPTD/PC61BM devices also exhibit superior thermal stability and photo‐stability as well as long‐term stability in ambient atmosphere without any device encapsulation, which show less performance decay as compared to most of the reported organic solar cells. In view of their great potential, solvent additive engineering via adding p‐anisaldehyde (AA) is attempted, leading to a further improved efficiency of 7.41%, one of the highest efficiencies for all air‐processed and stable organic photovoltaic devices. Moreover, the device stability under different ambient conditions is also further improved with the AA additive engineering. Various characterizations are conducted to probe the structural, morphology, and chemical information in order to correlate the structure with photovoltaic performance. This work paves a way for developing a new generation of air‐processable organic solar cells for possible commercial application.
Air‐Processed, Stable Organic Solar Cells with High Power Conversion Efficiency of 7.41%
High efficiency, excellent stability, and air processability are all important factors to consider in endeavoring to push forward the real‐world application of organic solar cells. Herein, an air‐processed inverted photovoltaic device built upon a low‐bandgap, air‐stable, phenanthridinone‐based ter‐polymer (C150H218N6O6S4)n (PDPPPTD) and [6,6]‐phenyl‐C61‐butyric acid methyl ester (PC61BM) without involving any additive engineering processes yields a high efficiency of 6.34%. The PDPPPTD/PC61BM devices also exhibit superior thermal stability and photo‐stability as well as long‐term stability in ambient atmosphere without any device encapsulation, which show less performance decay as compared to most of the reported organic solar cells. In view of their great potential, solvent additive engineering via adding p‐anisaldehyde (AA) is attempted, leading to a further improved efficiency of 7.41%, one of the highest efficiencies for all air‐processed and stable organic photovoltaic devices. Moreover, the device stability under different ambient conditions is also further improved with the AA additive engineering. Various characterizations are conducted to probe the structural, morphology, and chemical information in order to correlate the structure with photovoltaic performance. This work paves a way for developing a new generation of air‐processable organic solar cells for possible commercial application.